Bone marrow derived Mesenchymal stem cells (MSCs) were evaluated as an alternative source for tissue engineering of peripheral nerves. Human MSCs were subjected to a series of treatment with a reducing agent, retinoic acid and a combination of trophic factors. This treated MSCs differentiated into Schwann cells were characterized in vitro via flow cytometry analysis and immunocytochemically. In contrast to untreated MSCs, differentiated MSCs expressed Schwann cell markers in vitro, as we confirmed by flow cytometry analysis and immunocytochemically. These results suggest that human MSCs can be induced to be a substitute for Schwann cells that may be applied for nerve regeneration since it is difficult to grow Schwann cells in vitro.
A major factor limiting survival following extensive thermal injury is insufficient availability of donor sites to provide enough skin for the required grafting procedures. Limitation of autologous grafting promotes the usage of allograft skin substitutes to promote wound healing. Here, we investigated the wound healing potential of allograft single layered tissue engineered skin which comprises of either keratinocytes (SLTES-K) or fibroblast (SLTES-F) with fibrin as the delivery system. Results from gross and microscopic evaluation showed our single layered tissue engineered skin constructed with keratinocytes or fibroblast after gamma radiation with the dosage of 2Gy could serve as allograft for the treatment of skin loss.
The emergence of tissue engineering and stem cell research has created a tremendous response amongst scientist in Malaysia. However, despite the enthusiastic to embark on the research we have to carefully divert the research towards our needs. This is due to our responsibility to address the mounting problem of communicable diseases here and a very limited funding. As commercialization is a key objective the combination of products towards treating or diagnosing communicable and non-communicable diseases in the developing country is another important factor. The discussion here is mainly on the evolution of tissue engineering in Malaysia and taking a model of tissue engineering in otolaryngology.
The treatment of major burn injuries are a formidable challenge to the burn surgeon. Early aggressive surgery for deep to full thickness burn injuries is vital in the prevention of infection. The ultimate goal in major burn injuries is to prevent the onset of multi-resistant organisms and achieve early wound cover. The field of tissue engineering can help to expedite the healing of these burn wounds. The development of keratinocyte culture delivery system can be used clinically to fasten the healing process and save many lives.
To evaluate the effect of autologous human serum (AHS) versus pooled human serum (PHS) versus foetal bovine serum (FBS) for growth of articular chondrocytes and formation of chondrocytefibrin constructs.
Standard fibroblast culture medium usually contains fetal bovine serum (FBS). In theory, unknown risks of infection from bovine disease or immune reaction to foreign proteins may occur if standard culture method is used for future human tissue-engineering development. Human serum (HS) theoretically would be another choice in providing a safer approach and autologous clinically reliable cells.
The aim of this study was to isolate stem cells from dental pulp of primary molars and incisors to be used as possible source for tissue engineering. Human primary molars and incisors were collected from subjects aged 4-7 year-old under standardized procedures. Within 24 hours, the tooth was cut at the cemento-enamel junction using hard tissue material cutter. The dental pulp tissue was extracted, digested and then cultured in Alpha Modified Eagles's Medium (α-MEM) supplemented with 20% FCS, 100 mM L-ascorbic acid 2-phosphate, 200 mM L-glutamine and 5000 units/ml Penicillin/Streptomycin. The cells were observed daily under the microscope until confluence. Children's tooth pulp- derived progenitor cells were found positive for stem cell markers CD105 and CD166, which are consistent with the finding for mesenchymal stem cells (MSCs) from bone marrow.
This study was performed to determine the microscopic biological response of human nasal septum chondrocytes and human knee articular chondrocytes placed on a demineralized bovine bone scaffold. Both chondrocytes were cultured and seeded onto the bovine bone scaffold with seeding density of 1 x 105 cells per 100 microl/scaffold and incubated for 1, 2, 5 and 7 days. Proliferation and viability of the cells were measured by mitochondrial dehydrogenase activity (MTT assay), adhesion study was analyzed by scanning electron microscopy and differentiation study was analyzed by immunofluorescence staining and confocal laser scanning electron microscopy. The results showed good proliferation and viability of both chondrocytes on the scaffolds from day 1 to day 7. Both chondrocytes increased in number with time and readily grew on the surface and into the open pores of the scaffold. Immunofluorescence staining demonstrated collagen type II on the scaffolds for both chondrocytes. The results showed good cells proliferation, attachment and maturity of the chondrocytes on the demineralized bovine bone scaffold. The bovine bone being easily resourced, relatively inexpensive and non toxic has good potential for use as a three dimensional construct in cartilage tissue engineering.
Synthetic polymers have attracted much attention in tissue engineering due to their ability to modulate biomechanical properties. This study investigated the feasibility of processing poly(epsilon-caprolactone) (PCL) homopolymer, PCL-poly(ethylene glycol) (PEG) diblock, and PCL-PEG-PCL triblock copolymers into three-dimensional porous scaffolds. Properties of the various polymers were investigated by dynamic thermal analysis. The scaffolds were manufactured using the desktop robot-based rapid prototyping technique. Gross morphology and internal three-dimensional structure of scaffolds were identified by scanning electron microscopy and micro-computed tomography, which showed excellent fusion at the filament junctions, high uniformity, and complete interconnectivity of pore networks. The influences of process parameters on scaffolds' morphological and mechanical characteristics were studied. Data confirmed that the process parameters directly influenced the pore size, porosity, and, consequently, the mechanical properties of the scaffolds. The in vitro cell culture study was performed to investigate the influence of polymer nature and scaffold architecture on the adhesion of the cells onto the scaffolds using rabbit smooth muscle cells. Light, scanning electron, and confocal laser microscopy showed cell adhesion, proliferation, and extracellular matrix formation on the surface as well as inside the structure of both scaffold groups. The completely interconnected and highly regular honeycomb-like pore morphology supported bridging of the pores via cell-to-cell contact as well as production of extracellular matrix at later time points. The results indicated that the incorporation of hydrophilic PEG into hydrophobic PCL enhanced the overall hydrophilicity and cell culture performance of PCL-PEG copolymer. However, the scaffold architecture did not significantly influence the cell culture performance in this study.
Previous studies suggested telomerase activity as a determinant of cell replicative capacity by delaying cell senescence. This study aimed to evaluate the feasibility of adopting telomerase activity as a selection criterion for in vitro expanded skin cells before autologous transplantation. Fibroblasts and keratinoctyes were derived from the same consenting patients aged 9-69 years, and cultured separately in serum-supplemented and serum-free media, respectively. Telomerase activity of fresh and cultured cells were measured and correlated with cell growth rate, donor age and passage number. The results showed that telomerase activity and cell growth were independent of donor age for both cell types. Telomerase was expressed in freshly digested epidermis and dermis and continued expressing in vitro. Keratinocytes consistently showed 3-12 folds greater telomerase activity than fibroblast both in vivo and in vitro. Conversely, growth rate for fibroblast exceeded that of keratinocyte. Telomerase activity decreased markedly at Passage 6 for keratinocytes and ceased by Passage 3 for fibroblasts. The decrease or cessation of telomerase activity coincided with senescence for keratinocyte but not for fibroblast, implying a telomerase-regulated cell senescence for the former and hence a predictor of replicative capacity for this cell type. Relative telomerase activity for fibroblasts from the younger age group was significantly higher than that from the older age group; 69.7% higher for fresh isolates and 31.1% higher at P0 (p<0.05). No detectable telomerase activity was to be found at later subcultures for both age groups. Similarly for keratinocytes, telomerase activity in the younger age group was significantly higher (p<0.05) compared to that in the older age group; 507.7% at P0, 36.8% at P3 and the difference was no longer significant at P6. In conclusion, the study provided evidence that telomerase sustained the proliferation of keratinocytes but not fibroblasts. Telomerase activity is an important criterion for continued survival and replication of keratinocytes, hence its positive detection before transplantation is desirable. Inferring from our results, the use of keratinocytes from Passage 3 or lesser for construction of skin substitute or cell-based therapy is recommended owing to their sustained telomerase expression.
Ceramic materials play key role in several biomedical applications. One of them is bone graft which is use in treating bone defect which caused by injury or osteoporosis. Calcium phosphates based ceramic are preferred as bone grafts in hard tissue engineering because of their chemical compositions are similar to the composition of human bone, superior bioresorbable and bioactivity. In this study, β-tricalcium phosphate (β-TCP) ceramic was synthesized by using sol-gel method. Phosphorous pentoxide (P2O5) and calcium nitrate tetrahydrate (Ca(NO3)2.4H2O) were used as calcium and phosphate precursors. The effects of calcination temperature on the synthesis powder were studied using the XRD, SEM-EDS and FTIR techniques. It was found that calcination temperature greatly influence the purity of the synthesized powders. The β-TCP was the dominant phase with the formation of α-TCP at calcination temperature from 600 to 800°C. Pure β-TCP was obtained at calcination of 900°C. As the temperature increased to 1000°C, the β-TCP was decomposed to for calcium phosphate oxide (CPO). The sol-gel method has some advantages over other methods, mainly its simplicity and ability to produce pure β-TCP at lower calcination temperature.
Purpose:To investigate the feasibilty of using processed human amniotic membrane (HAM) to support the attachment and proliferation of chondrocytes in vitro which it turn can be utilised as a cell delivery vehicle in tissue engineering applications. Methods: Fresh HAM obtained from patients undergoing routine elective ceasarean sections was harvested., processed and dried using either freez drying (FD) or air drying (AD) methods prior to sterilisation by gamma irradiation. Isolated, processed and characterised rabbit autologous chondrolytes were seeded on processsed HAM and cultured for up to three weeks. Cell attachment and proliferation were examined qualitatively using inverted brightfield microcospy. Results: Processed HAM appeared to allow cell attachment when implanted with chrondocytes. Although cells seeded on AD and FD HAM did not appear to attach as strongly as those seeded on glycerol preserved intact human amniotic membrane, these cells to be proliferated in cell culture conditions. Conclusion: Prelimanary results show that processed HAM chondrocyte attachment and proliferation.
Adult ocular stem cells have the potential to restore vision in patients previously deemed incurable. This review summarizes strides in stem cell research and stumbling blocks that must be overcome to enable treatment viability in ophthalmology.
The aim of this study was to engineer skeletal muscle tissue for repair abdominal wall defects. Myoblast were seeded onto the scaffolds and cultivated in vitro for 5 days. Full thickness abdominal wall defects (3 x 4 cm) were created in 18 male New Zealand white rabbits and randomly divided into two equal groups. The defects of the first group were repaired with myoblast-seeded-bovine tunica vaginalis whereas the second group repaired with non-seeded-bovine tunica vaginalis and function as a control. Three animals were sacrificed at 7th, 14th, and 30th days of post-implantation from each group and the explanted specimens were subjected to macroscopic and microscopic analysis. In every case, seeded scaffolds have better deposition of newly formed collagen with neo-vascularisation than control group. Interestingly, multinucleated myotubes and myofibers were only detected in cell-seeded group. This study demonstrated that myoblast-seeded-bovine tunica vaginalis can be used as an effective scaffold to repair severe and large abdominal wall defects with regeneration of skeletal muscle tissue.
In dental implant treatment, the long-term prognosis is dependent on the biologic seal formed by the soft tissue around the implant. The in vitro investigation of the implant-soft tissue interface is usually carried out using a monolayer cell-culture model that lacks a polarized-cell phenotype. This study developed a tissue-engineered three-dimensional oral mucosal model (3D OMM) to investigate the implant-soft tissue interface.
Monolayer culture expansion remains as a fundamental step to acquire sufficient number of cells for 3D constructs formation. It has been well-documented that cell expansion is however accompanied by cellular dedifferentiation. In order to promote cell growth and circumvent cellular dedifferentiation, we evaluated the effects of Transforming Growth Factor Beta-2 (TGF-β2), Insulin-like Growth Factor-I (IGF-I) and basic Fibroblast Growth Factor (bFGF) combination on articular chondrocytes culture and 'chondrocytes-fibrin' construct formation. Chondrocytes were serially cultured in: (1) F12:DMEM+10% Foetal Bovine Serum (FBS) with growth factors (FD10GFs), (2) F12:DMEM+2%FBS with the growth factors (FD2GFs) and, (3) F12:DMEM+10%FBS without growth factors (FD) as control. Cultured chondrocytes were evaluated by means of growth kinetics parameters, cell cycle analysis, quantitative phenotypic expression of collagen type II, aggrecan core protein sox-9 and collagen type I and, immunochemistry technique. Harvested chondrocytes were incorporated with plasma-derived fibrin and were polymerized to form the 3D constructs and implanted subcutaneously at the dorsum of athymic nude mice for eight (8) weeks. Resulted constructs were assigned for gross inspections and microscopic evaluation using standard histochemicals staining, immunochemistry technique and, quantitative phenotypic expression of cartilage markers to reassure cartilaginous tissue formation. Growth kinetics performance of chondrocytes cultured in three (3) types of culture media from the most to least was in the following order: FD10GFs>FD2GFs>FD. Following growth kinetics analysis, we decided to use FD10GFs and FD (control) for further evaluation and 'chondrocytes-fibrin' constructs formation. Chondrocytes cultured in FD10GFs preserved the normal diploid state (2c) with no evidence of aneuploidy, haploidy or tetraploidy. Expression of cartilage-specific markers namely collagen type II, aggrecan core protein and sox-9 were significantly higher in FD10GFs when compared to control. After implantation, 'chondrocytes-fibrin' constructs exhibited firm, white, smooth and glistening cartilage-like properties. FD10GFs constructs formed better quality cartilage-like tissue than FD constructs in term of overall cartilaginous tissue formation, cells organization and extracellular matrix distribution in the specimens. Cartilaginous tissue formation was confirmed by the presence of lacunae and cartilage-isolated cells embedded within basophilic ground substance. Presence of proteoglycan was confirmed by positive Safranin O staining. Collagen type II exhibited immunopositivity at the pericellular and inter-territorial matrix area. Chondrogenic properties of the construct were further confirmed by the expression of genes encoding collagen type II, aggrecan core protein and sox9. In conclusion, FD10GFs promotes the proliferation of chondrocytes and formation of good quality 'chondrocytes-fibrin' constructs which may have potential use of matrix-induced cell implantation.
Human amniotic epithelial cells (hAECs) are potentially one of the key players in tissue engineering due to their easy availability. The aim of the present study was to develop an optimal isolation and transportation technique, as well as to determine the immunophenotype and epithelial gene expression of hAECs. Amnion was mechanically peeled off from the chorion and digested with trypsin-ethylenediaminetetraacetic acid. The isolated hAECs were cultured in medium containing 10 ng/mL epidermal growth factor until P4. The epithelial gene expression, cell surface antigen and protein expression of hAECs were analyzed by quantitative polymerase chain reaction, flow cytometry and immunocytochemistry. hAECs were also cultured in adipogenic, osteogenic and neurogenic induction media. The best cell yield of hAECs was seen in the digestion of 15 pieces of amnion (2 × 2 cm) and isolated 30 min after digestion with trypsin. F12:Dulbecco's modified eagle medium was the best medium for short term storage at 4 °C. hAECs expressed CD9, CD44, CD73 and CD90, and negligibly expressed CD31, CD34, CD45 and CD117. After serial passage, CK3, CK19 and involucrin gene expressions were upregulated, while p63, CK1 and CK14 gene expressions were downregulated. Sustained gene expressions of integrin β1 and CK18 were observed. At initial culture, these cells might have stem-like properties. However, they differentiated after serial passage. Nonetheless, hAECs have epithelial stem cell characteristics and have the potential to differentiate into corneal epithelial cells. Further investigations are still needed to elucidate the mechanism of differentiation involved and to optimize the culture condition for long term in vitro culture.
The objective of this study was to regenerate the tracheal epithelium using autologous nasal respiratory epithelial cells in a sheep model. Respiratory epithelium and fibroblast cells were harvested from nasal turbinates and cultured for 1 week. After confluence, respiratory epithelium and fibroblast cells were suspended in autologous fibrin polymerized separately to form a tissue-engineered respiratory epithelial construct (TEREC). A 3 × 2 cm² tracheal mucosal defect was created, and implanted with TEREC and titanium mesh as a temporary scaffold. The control groups were divided into 2 groups: polymerized autologous fibrin devoid of cells (group 1), and no construct implanted (group 2). All sheep were euthanized at 4 weeks of implantation. Gross observation of the trachea showed minimal luminal stenosis formation in the experimental group compared to the control groups. Macroscopic evaluation revealed significant mucosal fibrosis in control group 1 (71.8%) as compared to the experimental group (7%). Hematoxylin and eosin staining revealed the presence of minimal overgrowth of fibrous connective tissue covered by respiratory epithelium. A positive red fluorescence staining of PKH26 on engineered tissue 4 weeks after implantation confirmed the presence of cultured nasal respiratory epithelial cells intercalated with native tracheal epithelial cells. Scanning electron microscopy showed the presence of short microvilli representing immature cilia on the surface of the epithelium. Our study showed that TEREC was a good replacement for a tracheal mucosal defect and was able to promote natural regenesis of the tracheal epithelium with minimal fibrosis. This study highlighted a new technique in the treatment of tracheal stenosis.