Varicella or chickenpox is an infectious disease caused by Varicella Zoster Virus (VZV), which commonly affects the children. It is a mild, self-limiting disease and rarely complicate to serious conditions except in adults. Decreasing incidence of chickenpox among children, probably owing to improved living conditions ,prevention and health care, is worrisome as growing number of adults are being infected. This creates disturbing concerns in many parties as women at childbearing age might get infected and not only are them at a great risk of serious complications, but also their unborn fetus or their newborn babies.
Neck abscess is still common in developing countries. Often the presentation is late especially when the pain becomes intolerable or the airway is compromised. Intramuscular abscess in the neck is very rarely encountered. We report a case of an abscess of the right sternocleidomastoid. The culture grew Proteus mirabilis. The outline of management is discussed.
Background: The World Health Organization recommends the practice of exclusive breastfeeding of infants for the first 6 months after birth. The objective of present study was to estimate the prevalence and the factors influencing exclusive breastfeeding. The perceptions of mothers about breastfeeding in an urban slum area of Western India were also enquired.
Methods: This cross sectional study was conducted over six months amongst 200 mothers of children in the age group of 6 – 12 months attending the growth and development clinic in one of the urban health centres. Data was collected using a pre-tested, structured questionnaire on breastfeeding practices. Factors related to exclusive breastfeeding were analysed using bivariate and multivariate analysis.
Results: Prevalence of exclusive breastfeeding reported by the participants was 61.5%. Having a male child, maternal age < 30 years, level of education of mother parity, receiving infant feeding advice, initiation of breastfeeding within one hour of birth and administration of colostrum to the baby were associated with exclusive breastfeeding (p
It is ironical to realize that a perfect and free nutritional product, individually produced and naturally distributed to all families, is not universally used. This product is of course breast milk that nurtures the optimal health, growth and development of the human young. Breast milk also protects infants and young children from and prevents diseases in the short and long term. (Copied from article)
A recently published meta-analysis showed that each additional serving of rice increased risk of type 2 diabetes mellitus (DM) by an alarming 11%. We investigated whether this phenomenon is seen in the Malaysian population by studying the effect of rice intake and added sugar consumption on fasting plasma glucose (FPG) and fasting triacylglycerol (TAG).
As women with breast cancer are living longer, issues beyond survivorship like the much neglected sexual functioning and issue of quality of life have become increasingly important. Experiences of significant alterations in sexual functioning need to be addressed. However, these sexual issues are often not acknowledged in our traditional medical model of health care delivery. This paper briefly reviews the changes in sexual functioning after a diagnosis of breast cancer, with implication for clinical practice and medical curicula.
The state of Selangor, Malaysia, is facing a significant rise in the number of malaria cases with the incidence varying from 20 to 90 per 100,000 persons in a population. A study was carried out to describe the distribution of malaria cases in relation to the growing number of foreign workers in Selangor. Data were reviewed using the return forms "PBV (M) 101", a summary of malaria cases in Selangor for 2006 and Annual Reports of Vector-Borne Disease Control Unit, Selangor State Department for 2001- 2005. The malaria cases in Selangor varied between 172 cases in 2001 and 90 cases in 2006. Most of the cases were contributed by foreign workers, who were predominantly male of economically active age group and came from malaria endemic countries. Most of these cases were concentrated in the urban districts. Malaria is still endemic in Selangor. Malarial infection has the potential of contributing to an urban outbreak of malaria.
The microstructural evolution of Sn-40Pb/Cu joints has been investigated under 125 o C thermal exposure conditions using single shear lap joints. A scanning electron microscope (SEM) was used to observe the morphology of the phases and energy dispersive x-ray (EDX) was used to estimate the elemental compositions of the phases. A double layer of Cu6Sn5 and Cu3Sn were observed. The Cu6Sn5 developed with a scalloped morphology, while the Cu3Sn always grew as a somewhat undulated planar layer in phase with the Cu6Sn5. The Cu6Sn5 layer began to transform from scallop shape to planar type after aging for 375 hours due to reduction in the interfacial energy. The intermetallic layers showed a linear dependence on the square root of aging time. The growth rate constant of the intermetallic compounds are estimated as 15.2 x 10 - 14 and 0.152 x 10 -14 cm 2 /s for Cu6Sn5 and Cu3Sn intermetallic, respectively.
Many attempts have been focused in the past on preparing of synthetic E-tricalcium (E-TCP), which being employed as bone substitute due to its biocompatibility and resorbability. Low temperature synthesize such as sol-gel method become popular due to the high product purity and homogenous composition. Sol-gel method is less economical towards commercialization because the cost of raw materials and the yield of the product that can be achieved. This paper describes the synthesis of ETCP via mixing of CaCO3 and H3PO4 followed by calcinations process at 750qC – 1050qC. X-ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimeter (DSC), fourier transformation infra-red (FTIR) were used for characterization and evaluation of the phase composition, morphology, particle size and thermal behavior of the product. E-TCP phase start to occur after calcinations at 750qC.
The presence of 226 Ra in water is a great concern in human life since it can cause health risk to a certain extent. In the state of Kelantan, being known of its granitic area, there is a lack measurement of 226 Ra content in river water, since water is the major source of water supply. According to the INTERIM National Water Quality Standards for Malaysia (INWQS), 226 Ra activity concentration in water cannot exceed 0.1 Bq/L. For this reasons, this research was planned to carry out a systematic measurement of water along Sungai Kelantan. Liquid Scintillation Counting was used for measurement of 226 Ra in water samples from Sungai Kelantan mainly in district of Kuala Krai. In this paper, the results obtained is about 26 water samples, filtered and unfiltered, collected along Sungai Lebir, Sungai Sok and Bukit Sabah. Thus, the assessment activity concentration of 226 Ra in river water was obtained as well as annual effective dose for consumption of drinking water.
Natural radionuclides such as 210 Po and 210 Pb were analyzed in soft part of cockle (Anadara granosa) obtained from Kuala Selangor in the west coast Peninsular of Malaysia. The activity levels of both nuclides fluctuated within the size of cockles from 41.3 ± 2.5 Bq/kg to 114 ± 7 Bq/kg and 12.9 ± 1.7 Bq/kg to 96.8 ± 5.3 Bq/kg in dry weight (dwt) for 210 Po and 210 Pb, respectively. The level activity in wet weight (wwt) also varied from 8.60 ± 0.52 Bq/kg to 25.70 ± 1.63 Bq/kg and 2.47 ± 0.40 Bq/kg to 19.27 ± 1.05 Bq/kg for 210 Po and 210 Pb, respectively, probably related to the different of metabolic rate and growth of cockles. Activity ratio of 210 Po/ 210 Pb in dry weight also fluctuated from 0.93 to 6.41 with not related to the decay of 210 Pb.
Texture evolution of NiO formed during oxidation of polycrystalline single oriented (100) Ni-Cr was investigated. This foil was also termed rolling assisted biaxially textured substrate (RABiTS). X-ray diffractograms of oxidized Ni-Cr RABiTS foil showed the existence of mostly (200) NiO indicating (100)-type NiO formed exclusively on (100) singly oriented Ni-Cr grains. Epitaxial relationship between the two layers is observed. However the dual-in-plane texture was recorded.
The in-plane texture was assessed by conducting phi scan and plotting series of pole figures measured at (111) NiO peak. The mechanism of the oxides formation was proposed to take into account the formation of (100)-type NiO. Cross section morphology of the oxidised foils reveals two oxidation layers; fast growing external layer consisting of the (100)-type NiO and an internal layer consisted of mostly Cr2O3 and maybe NiCr2O4. The thickness of NiO was ~ 10Pm. Cr2O3 formed as needle-like oxides embedded in a matrix of Ni foil. Inward diffusion of oxygen is believed to have caused this to happen. The external NiO layer was consisted of duplex microstructure characterised by columnar layer growing vertical on the surface of the metal and a few micron thick of equiaxed NiO. Delamination of the outer NiO layer often occurred at the columnarequiaxed interface which could be cured by CeO2 deposition on the foil prior to the oxidation process. CeO2 was deposited by conversion immersion using Ce(NO3)3.6H2O solution. (200) NiO formed on this coated sample as well.
We put attention on Intrinsic Josephson Junction (IJJ) to study the fundamental physic for device applications. Convenient self-flux method was used to grow BSCCO single crystals. We investigated the lid effect to examine the single crystal growth of high TC (Critical Temperature). We found that for the crystal growth with no lid, two stage transitions of TC ≅ 61 K and 77 K were observed. While for the crystal growth with lid, the BSCCO has TC ≅ 80K, ΔTC = 10K and approximately average size5x2mm 2 . When we increased weight of lid, the single crystal have increased to TC =80K, ΔTC = 4K and the typical size was ≅7x3mm 2 . TC and the crystal growth show a tendency to increase by the effect of the lid. From observed quasi-particle characteristics, c-axis direction changed from semiconductor to intrinsic Josephson characteristic with decreasing temperature.
Ceramic of BaxSr1-xTiO3 (BST) for x =0.3; 0.5 and 0.7 were successfully deposited by solid solution method. The BST ceramic were analyzed by x-ray diffraction (XRD). The XRD spectra was recorded on a Philips type PW 3701 diffractometer using CuKD (Oco = 1.54056 Å) radiation at 30 KV and 30 mA (900 watt). The spectra shows that BST ceramic are polycrystalline with tetragonal structure. The lattice constants analysis of the grown ceramics was analyzed by visual basic program. Using Cohen’s and Cramer’s algorithms in visual basic program, , the lattice constants are a = b = 3.877 Å; c = 3.970 Å for Ba0.3Sr0.7TiO3 ceramic, a = b = 3.979 Å; c = 3.981 Å. for Ba0.5Sr0.5TiO3 ceramic and a = b = 3.965 Å; c = 4.005 Å for Ba0.7Sr0.3TiO3 ceramic, respectively. The reform value of the lattice constant of BST ceramic is possibly associated with the anti site defects of Ba and Sr.
There are many essential and non-essential elements including metals and radionuclides present in vegetables. Howeve r, the accumulation of the several metals and radionuclides might cause the contamination to vegetables itself. Green m ustard (Brasissca rapa var. Parachinesis L.) was selected to represent the vegetable in this study. Objectives of this stud y are to determine the concentration of metals and radionuclides in the samples and to calculate the enrichment factor ( EF) and also to estimate the uptake, base on biological accumulation coefficient (BAC), for the various parts of selecte d vegetables. Three farmlands in the Cameron Highlands were studied namely Bharat, Kg Raja and Bertam area. The g reen mustard and soil samples were collected during the harvest season. Samples were dried, ground and sieved prior t o analysis. Analyses for both samples were done by using X-rays Fluorescence Spectroscopy (XRF) to measure the conc entration of Fe, Zn, Hg, U and Th. The concentration of all elements in the soils is lower than their concentration in the control soil, except for Zn, U and Th. The concentration of all elements in Green Mustard is lower than their concentrat ion in the soil where it was grown. The EF values in the Brasissca rapa var. Parachinesis L are lower than 2 except for U and Th, indicating some degree of contamination due to anthropogenic activities or naturally origin. The BAC values show that Zn and Hg were accumulated in the green mustard, depending on where the plant grows.
Protocorm-like bodies (PLBs) of an orchid (Oncidium lanceanum) were irradiated using 220 MeV 12 C 5+ ions, accelerated by AVF cyclotron at JAEA, Japan in 2005. Five different doses were applied to the PLBs; 0, 1.0, 2.0, 6.0 and 12.0 Gy. Following irradiation, these PLBs were maintained in cultures for germination and multiplication. Irradiation effects on growth and seedling regeneration patterns as well as molecular characteristics of the in vitro cultures were monitored and recorded. In general, average fresh weights of the irradiated PLBs increased progressively by irradiating the explants at 1.0, 2.0 and reached the maximum at 6.0 Gy. The figure however dropped when the explants were irradiated at 12 Gy. Surprisingly, although the highest average fresh weight was recorded on PLBs irradiated at 6.0 Gy, most of these PLBs were not able to regenerate into complete shoots. On average, after 4 months of irradiation, only 21 seedlings were successfully regenerated from each gram of these PLBs. The highest shoot regeneration was recorded on cultures irradiated at 2.0 Gy in which 102 seedlings were obtained from one gram of the PLBs. Some morphological changes were seen on in vitro plantlets derived from PLBs irradiated at doses of 1.0 and 2.0 Gy. Most of the regenerated seedlings have been transferred to glasshouse for further morphological selection. Molecular analysis showed the presence of DNA polymorphisms among the seedlings from different doses of irradiation.
Effects of cultural practice under different habitats, of well-managed monoculture plantation and growing wild under rubber trees, were studied in Aquilaria malaccensis (Karas) leaves. This study was carried out on Karas growing in these two habitats each from Lipis, Pahang and Sepang, Selangor areas in Malaysia; under the control and induced treatments. The parameters studied include wet and dry weight of 50 matured leaves, iron and zinc elemental contents in leaf, iron and zinc uptakes from soil, and leaf and soil moisture contents. Iron and zinc were analysed in Karas leaves and soil by using Instrumental Neutron Activation Analysis (INAA) technique.
Thermoelectric nanostructures hold great promise for capturing and directly converting into electricity some vast amount of low-grade waste heats now being lost to the environment (e.g. from nuclear power plant, fossil fuel burning, automotives and household appliances). In this study, large-area vertically-aligned silicon nanowire (SiNW) arrays were synthesized in an aqueous solution containing AgN•i and HF on p-type Si (100) substrate by self-selective electroless etching process. The etching conditions were systematically varied in order to achieve different stages of nanowire formation. Diameters of the SiNWs obtained varied from approximately 50 to 200 nm and their lengths ranged from several to a few tens of um. Te/Bi2Tex.Si thermoelectric core-shell nanostructures were subsequently obtained via galvanic displacement of SiNWs in acidic HF electrolytes containing HTe02+ and 139' /HTe02+ ions. The reactions were basically a nano-electrochemical process due to the difference in redox potentials between the materials. The surface-modified SiNWs of core-shell structures had roughened surface morphologies and, therefore, higher surface-to-bulk ratios compared to unmodified SiNWs. They have potential applications in sensors, photovoltaic and thermoelectric nanodevices. Growth study on the SiNWs and core-shell nanostructures produced is presented using various microscopy, diffraction and probe-based techniques for microstructural, morphological and chemical characterizations.
Even though a lot of new advanced materials have been developed nowadays, steel remains a major material in construction, automobiles, appliances, industrial machinery as well as in the nuclear industry. Due to steel easily corroded, a proper surface protection is required to avoid any failures and extended the life cycle of the components. Surface coating is an efficient and economical method to obtain desirable material surfaces properties. Hot dip aluminizing technique was utilized in this study. Experiments have been conducted on the mild steel substrates with 12mm diameter. Prior to hot dipping process, observation on grain growth at three different temperatures had also been conducted to understand the behaviour of steel under application of heat. The substrates were heated at 700ºC, 800ºC and 900ºC for 1 hour and the microstructure was analyzed. The temperature of 800C was chosen for hot dipping. The substrates were dipped into the molten aluminum maintained at temperature 800ºC for 2,4,6,8,10,15 and 20 minutes. Optical microscopy and energy dispersive X-ray spectroscopy were used in this investigation. From the microstructure observation, it showed the appearance of intermetallic layer covered by the top layer of Al on the mild steel substrate increased with the increase in dipping time ranging from 36 to 282μm. The result of EDX analysis revealed the existence of Fe and Al in form of Fe2Al5 phase for all the dipping time.
Silicon nanowires were synthesized on Si substrates (111) via thermal evaporation using AuPd thin layer catalyst. Pre cleaned of Si wafer was used as a substrate to assemble the nanostructure products. In this work, the effect of growth temperature that ranging from 800 to 1000°C on the formation of silicon nanowires studied extensively. X-ray diffraction and field emission scanning electron microscope were employed to characterize the structures and morphology of nanowires. Vertical aligned silicon nanowires have been successfully grown on Si substrates at 900 and 1000°C. At 1100°C, the high aspect ratio of silicon nanowires can be produced but the formation density is low. The presence of AuPd catalyst on the tip of nanowires, it is expected that VLS is the most suitable to explain the growth mechanism of obtained SiNWs. The crystalline structure of SiNWs was proved by XRD data.