Displaying all 12 publications

Abstract:
Sort:
  1. Zeng Y, Xu Y, Kee CL, Low MY, Ge X
    Drug Test Anal, 2016 Mar;8(3-4):351-6.
    PMID: 26305055 DOI: 10.1002/dta.1846
    In this study, a liquid chromatography-tandem mass spectrometry (LC-MS/MS) with scheduled multiple reaction monitoring (MRM) enhanced product ion (EPI) method was developed for simultaneous determination of 40 compounds with weight loss effect, including bisacodyl, phenolphthalein, and sibutramine and its metabolites, etc. They might be adulterated in health supplements to get prominent weight loss effect. The samples were analyzed using a Q-Trap 5500 coupled with high performance liquid chromatography (HPLC) and a CORTECS ultra performance liquid chromatography (UPLC) C18 column (100 mm x 2.1 mm x1.6 µm). Scheduled MRM was used as survey scan, MS2 spectra acquired in the EPI mode were used to perform library searching to increase the confidence of detection. Limits of detection were less than 10 ng/g for the majority of the analytes. A total of 447 weight loss products were tested in our laboratory in the past three years. Among these samples, 119 samples were found to be adulterated with one or more weight loss compounds, including sibutramine, its metabolites benzyl sibutramine and desmethyl sibutramine; phenolphthalein; bisacodyl; furosemide; liothyronine (T3); and thyroxine (T4). Copyright © 2015 John Wiley & Sons, Ltd.
  2. Jiang H, Peng H, Guo H, Zeng Y, Li L, Zhang Y, et al.
    ACS Appl Mater Interfaces, 2020 Nov 18;12(46):51344-51356.
    PMID: 33146507 DOI: 10.1021/acsami.0c13139
    Thin-film lithium-ion microbatteries with a high energy density and long lifespan are exceedingly desired for developing self-powered integrated micro-nano devices and systems. However, exploring high-performance thin-film anodes still remains a challenge. Herein, a double-layer-structure diamond-like carbon-ZnS (DLC-ZnS) thin-film anode fabricated by radio frequency magnetron sputtering exhibits high specific capacity and good cycling stability up to 1000 cycles, superior to the pure ZnS thin-film anode. To understand the mechanism, the bimodal amplitude modulated-frequency modulated atomic force microscopy was used to explore the mechanical properties of the thin films, and the DLC layer shows significantly higher Young's modulus than the ZnS thin film. The DLC interface with a high Young's modulus can effectively buffer the mechanical stress originating from the huge volume changes of the ZnS layer during lithiation/delithiation processes; therefore, the DLC interface maintains the higher mechanical integrity of the DLC-ZnS thin film and improves the utilization of ZnS. In addition, the electrochemical kinetics of the DLC-ZnS and ZnS thin films were also investigated by electrochemical methods. Electrochemical impedance spectroscopy tests indicate the obstacle of the DLC interface to Li+ ion diffusion in the initial charge/discharge processes; however, the DLC-ZnS thin film exhibits lower total resistance than the ZnS thin film afterward. In particular, galvanostatic intermittent titration technique tests were performed to find out the differences between the two thin films during the galvanostatical charge/discharge processes. The results demonstrate the obviously enhanced conversion reaction reversibility and decreased alloy reaction polarization of the DLC-ZnS thin film; therefore, it delivers higher reversible capacity.
  3. Zhang J, Chu R, Chen Y, Jiang H, Zeng Y, Zhang Y, et al.
    Nanotechnology, 2018 Dec 20.
    PMID: 30572323 DOI: 10.1088/1361-6528/aafa25
    Carbon-coated nickel cobaltate on nickel foam (C@NCO@NF) with stable pseudocapacitive lithium storage capacity was prepared via a two-step strategy. NiCo hydroxide were initially grown on Ni foam via electrodeposition. Subsequent glucose soaking and annealing converted the intermediate into C@NCO@NF. Carbon coating could significantly improve cycling stability and rate performance of the binder-free anode. The C@NCO@NF electrode could stably deliver a reversible capacity of 513 mAh∙g-1 after 500 cycles at a current density of 500 mA∙g-1. It could even stably cycle at a high current density of 5000 mA∙g-1 for 3000 times, with a reversible capacity of 115 mAh∙g-1. Kinetic analysis revealed that surface-controlled pseudo-capacitance play a dominate role in the lithium ion storage. Improved electrochemical performance is attributed to the synergetic effect of pseudo-capacitance and carbon coating.
  4. Chen Y, Ge D, Zhang J, Chu R, Zheng J, Wu C, et al.
    Nanoscale, 2018 Sep 20;10(36):17378-17387.
    PMID: 30203824 DOI: 10.1039/c8nr01195h
    Tin-based materials have been intensively studied as attractive candidates for high-capacity and long-cycle-life anodes in Li-ion batteries (LIBs) owing to their low cost and high energy density. However, they all suffer from severe structural decay during the lithium ion insertion/extraction process, which results in deterioration in the overall performance of the batteries. To mitigate this problem, we have synthesized a Mo-doped SnO2 nanostructure via a facile hydrothermal method, which then fragmented into ultrafine particles after dozens of cycles. The fracture-resistant size and ample contact with Super-P and Li2O greatly improved the electrochemical kinetics and cyclability to deliver a reversible capacity of 670 mA h g-1 after 700 cycles, which demonstrated the potential suitability of Mo-doped SnO2 nanoparticles as a long-cycle-life anode material. Then, the compounds were uniformly dispersed in carbon nanofibers and reduced in situ to prepare a free-standing anode via electrospinning and carbonization. When used directly as an anode in LIBs (without a polymeric binder or conductive agent, as well as a current collector), the nanofiber membrane anode delivered comparable cycling performance and capacity to that of a slurry-coated electrode.
  5. Ma WJ, Yang X, Wang XR, Zeng YS, Liao MD, Chen CJ, et al.
    Plant Dis, 2014 Jul;98(7):991.
    PMID: 30708879 DOI: 10.1094/PDIS-06-13-0609-PDN
    Hylocereus undatus widely grows in southern China. Some varieties are planted for their fruits, known as dragon fruits or Pitaya, while some varieties for their flowers known as Bawanghua. Fresh or dried flowers of Bawanghua are used as routine Chinese medicinal food. Since 2008, a serious anthracnose disease has led to great losses on Bawanghua flower production farms in the Baiyun district of Guangzhou city in China. Anthracnose symptoms on young stems of Bawanghua are reddish-brown, sunken lesions with pink masses of spores in the center. The lesions expand rapidly in the field or in storage, and may coalesce in the warm and wet environment in spring and summer in Guangzhou. Fewer flowers develop on infected stems than on healthy ones. The fungus overwinters in infected debris in the soil. The disease caused a loss of up to 50% on Bawanghua. Putative pathogenic fungi with whitish-orange colonies were isolated from a small piece of tissue (3 × 3 mm) cut from a lesion margin and cultured on potato dextrose agar in a growth chamber at 25°C, 80% RH. Dark colonies with acervuli bearing pinkish conidial masses formed 14 days later. Single celled conidia were 11 to 18 × 4 to 6 μm. Based on these morphological characteristics, the fungi were identified as Colletotrichum gloeosporioides (Penz.) Penz. & Sacc (2). To confirm this, DNA was extracted from isolate BWH1 and multilocus analyses were completed with DNA sequence data generated from partial ITS region of nrDNA, actin (ACT) and glutamine synthetase (GS) nucleotide sequences by PCR, with C. gloeosporioides specific primers as ITS4 (5'-TCCTCCGCTTATTGATATGC-3') / CgInt (5'-GGCCTCCCGCCTCCGGGCGG-3'), GS-F (5'-ATGGCCGAGTACATCTGG-3') / GS-R (5'-GAACCGTCGAAGTTCCAC-3') and actin-R (5'-ATGTGCAAGGCCGGTTTCGC-3') / actin-F (5'-TACGAGTCCTTCTGGCCCAT-3'). The sequence alignment results indicated that the obtained partial ITS sequence of 468 bp (GenBank Accession No. KF051997), actin sequence of 282 bp (KF712382), and GS sequence of 1,021 bp (KF719176) are 99%, 96%, and 95% identical to JQ676185.1 for partial ITS, FJ907430 for ACT, and FJ972589 for GS of C. gloeosporioides previously deposited, respectively. For testing its pathogenicity, 20 μl of conidia suspension (1 × 106 conidia/ml) using sterile distilled water (SDW) was inoculated into artificial wounds on six healthy young stems of Bawanghua using sterile fine-syringe needle. Meanwhile, 20 μl of SDW was inoculated on six healthy stems as a control. The inoculated stems were kept at 25°C, about 90% relative humidity. Three independent experiments were carried out. Reddish-brown lesions formed after 10 days, on 100% stems (18 in total) inoculated by C. gloeosporioides, while no lesion formed on any control. The pathogen was successfully re-isolated from the inoculated stem lesions on Bawanghua. Thus, Koch's postulates were fulfilled. Colletotrichum anthracnose has been reported on Pitaya in Japan (3), Malaysia (1) and in Brazil (4). To our knowledge, this is the first report of anthracnose disease caused by C. gloeosporioides on young stems of Bawanghua (H. undatus) in China. References: (1) M. Masyahit et al. Am. J. Appl. Sci. 6:902, 2009. (2) B. C. Sutton. Page 402 in: Colletotrichum Biology, Pathology and Control. J. A. Bailey and M. J. Jeger, eds. CAB International, Wallingford, UK, 1992. (3) S. Taba et al. Jpn. J. Phytopathol. 72:25, 2006. (4) L. M. Takahashi et al. Australas. Plant Dis. Notes 3:96, 2008.
  6. Yang DQ, Zeng Y, Sun XY, Yue X, Hu CX, Jiang P, et al.
    Trop Biomed, 2020 Dec 01;37(4):932-946.
    PMID: 33612747 DOI: 10.47665/tb.37.4.932
    In previous studies, a Trichinella spiralis serine protease (TsSP) was identified in excretion/secretion (ES) products from intestinal infective L1 larvae (IIL1) using immunoproteomics. The complete cDNA sequence of TsSP gene was 1372 bp, which encoded 429 amino acids with 47.55 kDa. The TsSP was transcribed and expressed at all T. spiralis life cycle phases, as well as mainly located at the cuticle and stichosome of the parasitic nematode. Recombinant TsSP bind to intestinal epithelial cells (IEC) and promoted larva invasion, however, its exact function in invasion, development and reproduction are still unknown. The aim of this study was to confirm the biological function of TsSP during T. spiralis invasion and growth using RNA interference (RNAi) technology. The results showed that on 1 day after electroporation using 2.5 µM siRNA156, TsSP mRNA and protein expression of muscle larvae (ML) was suppressed by 48.35 and 59.98%, respectively. Meanwhile, silencing of TsSP gene by RNAi resulted in a 61.38% decrease of serine protease activity of ML ES proteins, and a significant reduction of the in vitro and in vivo invasive capacity of IIL1 to intrude into the IEC monolayer and intestinal mucosa. When mice were infected with siRNA 156-transfected larvae, adult worm and muscle larva burdens were decreased by 58.85 and 60.48%, respectively. Moreover, intestinal worm growth and female fecundity were evidently inhibited after TsSP gene was knockdown, it was demonstrated that intestinal adults became smaller and the in vitro newborn larval yield of females obviously declined compared with the control siRNA group. The results indicated that knockdown of TsSP gene by RNAi significantly reduced the TsSP expression and enzymatic activity, impaired larvae intrusion and growth, and lowered the female reproductive capacity, further verified that TsSP might participate in diverse processes of T. spiralis life cycle, it will be a new prospective candidate molecular target of anti-Trichinella vaccines.
  7. Ling Q, Sadali NM, Soufi Z, Zhou Y, Huang B, Zeng Y, et al.
    Nat Plants, 2021 05;7(5):655-666.
    PMID: 34007040 DOI: 10.1038/s41477-021-00916-y
    The maturation of green fleshy fruit to become colourful and flavoursome is an important strategy for plant reproduction and dispersal. In tomato (Solanum lycopersicum) and many other species, fruit ripening is intimately linked to the biogenesis of chromoplasts, the plastids that are abundant in ripe fruit and specialized for the accumulation of carotenoid pigments. Chromoplasts develop from pre-existing chloroplasts in the fruit, but the mechanisms underlying this transition are poorly understood. Here, we reveal a role for the chloroplast-associated protein degradation (CHLORAD) proteolytic pathway in chromoplast differentiation. Knockdown of the plastid ubiquitin E3 ligase SP1, or its homologue SPL2, delays tomato fruit ripening, whereas overexpression of SP1 accelerates ripening, as judged by colour changes. We demonstrate that SP1 triggers broader effects on fruit ripening, including fruit softening, and gene expression and metabolism changes, by promoting the chloroplast-to-chromoplast transition. Moreover, we show that tomato SP1 and SPL2 regulate leaf senescence, revealing conserved functions of CHLORAD in plants. We conclude that SP1 homologues control plastid transitions during fruit ripening and leaf senescence by enabling reconfiguration of the plastid protein import machinery to effect proteome reorganization. The work highlights the critical role of chromoplasts in fruit ripening, and provides a theoretical basis for engineering crop improvements.
  8. Jiang H, Zhang J, Zeng Y, Chen Y, Guo H, Li L, et al.
    Nanotechnology, 2021 Nov 18;33(6).
    PMID: 34724657 DOI: 10.1088/1361-6528/ac3540
    Metal sulfides are promising anode materials for lithium ion batteries because of the high specific capacities and better electrochemical kinetics comparing to their oxide counterparts. In this paper, novel monocrystalline wurtzite ZnS@N-doped carbon (ZnS@N-C) nanoplates, whose morphology and phase are different from the common ZnS particles with cubic phase, are successfully synthesized. The ZnS@N-C nanoplates exhibit long cycle life with a high reversible specific capacity of 536.8 mAh · g-1after 500 cycles at a current density of 500 mA · g-1, which is superior to the pure ZnS nanoplates, illustrating the obvious effect of the N-doped carbon coating for mitigating volume change of the ZnS nanoplates and enhancing the electronic conductivity during charge/discharge processes. Furthermore, it is revealed that the ZnS single crystals with wurtzite phase in the ZnS@N-C nanoplates are transformed to the polycrystalline cubic phase ZnS after charge/discharge processes. In particular, the ZnS@N-C nanoplates are combined with the commercial LiNi0.6Co0.2Mn0.2O2cathode to fabricate a new type of LiNi0.6Co0.2Mn0.2O2/ZnS@N-C complete battery, which exhibits good cycling durability up to 120 cycles at a charge/discharge rate of 1 C after the prelithiation treatment on the ZnS@N-C anode, highlighting the potential of the ZnS@N-C nanoplates anode material applied in lithium ion battery.
  9. Chong LH, Yip AK, Farm HJ, Mahmoud LN, Zeng Y, Chiam KH
    Front Cell Dev Biol, 2024;12:1339251.
    PMID: 38374894 DOI: 10.3389/fcell.2024.1339251
    During breast cancer progression, there is typically increased collagen deposition resulting in elevated extracellular matrix rigidity. This results in changes to cell-matrix adhesion and cell migration, impacting processes such as the epithelial-mesenchymal transition (EMT) and metastasis. We aim to investigate the roles of cell-matrix adhesion and cell migration on breast tumor growth and progression by studying the impacts of different types of extracellular matrices and their rigidities. We embedded MCF7 spheroids within three-dimensional (3D) collagen matrices and agarose matrices. MCF7 cells adhere to collagen but not agarose. Contrasting the results between these two matrices allows us to infer the role of cell-matrix adhesion. We found that MCF7 spheroids exhibited the fastest growth rate when embedded in a collagen matrix with a rigidity of 5.1 kPa (0.5 mg/mL collagen), whereas, for the agarose matrix, the rigidity for the fastest growth rate is 15 kPa (1.0% agarose) instead. This discrepancy is attributable to the presence of cell adhesion molecules in the collagen matrix, which initiates collagen matrix remodeling and facilitates cell migration from the tumor through the EMT. As breast tumors do not adhere to agarose matrices, it is suitable to simulate the cell-cell interactions during the early stage of breast tumor growth. We conducted further analysis to characterize the stresses exerted by the expanding spheroid on the agarose matrix. We identified two distinct MCF7 cell populations, namely, those that are non-dividing and those that are dividing, which exerted low and high expansion stresses on the agarose matrix, respectively. We confirmed this using Western blot which showed the upregulation of proliferating cell nuclear antigen, a proliferation marker, in spheroids grown in the 1.0% agarose (≈13 kPa). By treating the embedded MCF7 spheroids with an inhibitor or activator of myosin contractility, we showed that the optimum spheroids' growth can be increased or decreased, respectively. This finding suggests that tumor growth in the early stage, where cell-cell interaction is more prominent, is determined by actomyosin tension, which alters cell rounding pressure during cell division. However, when breast tumors begin generating collagen into the surrounding matrix, collagen remodeling triggers EMT to promote cell migration and invasion, ultimately leading to metastasis.
  10. Huang K, Zhou J, Yang H, Xie T, Lan T, Ong S, et al.
    RSC Adv, 2023 Nov 16;13(48):33905-33910.
    PMID: 38019995 DOI: 10.1039/d3ra05659g
    The Ni-rich NCM622 is a promising cathode material for future high energy lithium ion batteries, but unstable electrochemical performance of NCM622 hinder its large scale commercial application. The cycling peformance of nickel-rich LiNi0.6Co0.2Mn0.2O2 (NCM622) cathode materials can be improved by surface coating. Here, a one-step approach based on TiF4 is used to successfully manufacture modified NCM622 cathode materials with a TiO2-LiF coating. The TiO2-LiF coated NCM622 preserves 79.7% capacity retention which is higher than the pure NCM622 (68.9%) at 1C after 200 cycles within 2.7-4.3 V. This material serves as the cathode for lithium-ion batteries (LIBs). The uniform TiO2-LiF coating layer can alleviate structural degradation brought on by unfavorable side reactions with the electrolyte has been validated. TiO2-LiF coated on NCM622 cathode materials can be modified easily by one-step approach.
  11. Barbu MC, Zeng Y, Shen X, Cox SR, Clarke TK, Gibson J, et al.
    PMID: 30197049 DOI: 10.1016/j.bpsc.2018.07.006
    BACKGROUND: Major depressive disorder is a clinically heterogeneous psychiatric disorder with a polygenic architecture. Genome-wide association studies have identified a number of risk-associated variants across the genome and have reported growing evidence of NETRIN1 pathway involvement. Stratifying disease risk by genetic variation within the NETRIN1 pathway may provide important routes for identification of disease mechanisms by focusing on a specific process, excluding heterogeneous risk-associated variation in other pathways. Here, we sought to investigate whether major depressive disorder polygenic risk scores derived from the NETRIN1 signaling pathway (NETRIN1-PRSs) and the whole genome, excluding NETRIN1 pathway genes (genomic-PRSs), were associated with white matter microstructure.

    METHODS: We used two diffusion tensor imaging measures, fractional anisotropy (FA) and mean diffusivity (MD), in the most up-to-date UK Biobank neuroimaging data release (FA: n = 6401; MD: n = 6390).

    RESULTS: We found significantly lower FA in the superior longitudinal fasciculus (β = -.035, pcorrected = .029) and significantly higher MD in a global measure of thalamic radiations (β = .029, pcorrected = .021), as well as higher MD in the superior (β = .034, pcorrected = .039) and inferior (β = .029, pcorrected = .043) longitudinal fasciculus and in the anterior (β = .025, pcorrected = .046) and superior (β = .027, pcorrected = .043) thalamic radiation associated with NETRIN1-PRS. Genomic-PRS was also associated with lower FA and higher MD in several tracts.

    CONCLUSIONS: Our findings indicate that variation in the NETRIN1 signaling pathway may confer risk for major depressive disorder through effects on a number of white matter tracts.

Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links