Plant tissues such as somatic embryos, apical shoot tips, axillary shoot buds, embryogenic calli, and protocom-like bodies are potential micropropagules that have been considered for creating synthetic seeds. In the present study, 3-5 mm microshoots of Oryza sativa L. Cv. MRQ 74 were used as explant sources for obtaining synthetic seeds. Microshoots were induced from stem explants on Murashige and Skoog (MS) medium supplemented with 1.5 mg/L benzylaminopurine (BAP). They were encapsulated in 3% (w/v) sodium alginate, 3% sucrose, 0.1 mg/L BAP, and 0.1 mg/L α-Naphthalene acetic acid (NAA). Germination and plantlet regeneration of the encapsulated seeds were tested by culturing them on various germination media. The effect of storage period (15-30 days) was also investigated. The maximum germination and plantlet regeneration (100.0%) were recorded on MS media containing 3% sucrose and 0.8% agar with and without 0.1 mg/L BAP. However, a low germination rate (6.67%) was obtained using top soil as a sowing substrate. The germination rate of the encapsulated microshoots decreased from 93.33% to 3.33% after 30 days of storage at 4°C in the dark. Therefore, further research is being done to improve the germination rate of the synthetic seeds.
Seven different hormone treatments, namely 6-benzylaminopurine (BAP) at 2, 3 mg L(-1) was applied singly and in combination with Indole Acetic Acid (IAA) at 0.18, 0.8 and 1.8 mg L(-l), BAP at 3.3 mg L(-l) in combination with IAA at 1.8 and 3.3 mg L(-l) and triple combination of BAP at 2.3, IAA at 1.8 and Gibberellic acid (GA3) at 1.0 mg L(-1) were tested, over four different incubation periods of 30, 45, 60 and 75 days, for their effect in the proliferation and growth of Smooth cayenne pineapple shoot-tip culture. Combined application of BAP at 3.3 and IAA at 1.8 mg L(-1) induced the highest proliferation of 19 shoots/explant and the highest total of 121 and 125 shoots over 4 cycles of multiplication. Raising the IAA to 3.3 mg L(-1) resulted in the lowest proliferation and stunted shoots. Incorporation of GA3 improved the shoot length but caused drastic reduction in proliferation. The other treatments showed an intermediate effect.
The use of artificial light sources such as light-emitting diodes (LEDs) has become a prerequisite in tissue culture studies to obtain morphogenetic enhancements on in vitro plants. This technology is essential for developmental enhancements in the growing plant cultures due to its light quality and intensity greatly influencing the in vitro growing explants at a cellular level. The current study investigates the effects of different light-emitting diode (LED) spectra on the growth of apical buds of Ficus carica var. Black Jack. Ficus carica, commonly known as figs is rich in vitamins, minerals, and phytochemicals capable of treating microbial infections and gastric, inflammatory, and cardiac disorders. Apical buds of Ficus carica var. Black Jack, presented morphogenetic changes when grown under six different LED spectra. The highest multiple shoots (1.80 per growing explant) and healthy growing cultures were observed under the blue + red LED spectrum. Wound-induced callus formation was observed on apical buds grown under green LED spectrum and discolouration of the growing shoots were observed on the cultures grown under far-red LED spectrum. Multiple shoots obtained from the blue + red LED treatment were rooted using 8 µM indole-3-acetic acid (IAA), and the rooted plantlets were successfully acclimatised. Compared with the other monochromatic LEDs, blue + red proved to be significantly better for producing excellent plant morphogeny. It is apparent that blue and red LED is the most suitable spectra for the healthy development of plants. The findings have confirmed that the combination of blue + red LED can potentially be used for enhancing growth yields of medicinally and commercially important plants.
Matched MeSH terms: Plant Shoots/growth & development
A procedure was developed for in vitro propagation of Curculigo latifolia through shoot tip culture. Direct regeneration and indirect scalp induction of Curculigo latifolia were obtained from shoot tip grown on MS medium supplemented with different concentrations and combinations of thidiazuron and indole-3-butyric acid. Maximum response for direct regeneration in terms of percentage of explants producing shoot, shoot number, and shoot length was obtained on MS medium supplemented with combination of thidiazuron (0.5 mg L(-1)) and indole-3-butyric acid (0.25 mg L(-1)) after both 10 and 14 weeks of cultures. Indole-3-butyric acid in combination with thidiazuron exhibited a synergistic effect on shoot regeneration. The shoot tips were able to induce maximum scalp from basal end of explants on the medium with 2 mg L(-1) thidiazuron. Cultures showed that shoot number, shoot length, and scalp size increased significantly after 14 weeks of culture. Transferring of the shoots onto the MS medium devoid of growth regulators resulted in the highest percentage of root induction and longer roots, while medium supplemented with 0.25 mg L(-1) IBA produced more numbers of roots.
The use of in vitro culture has been accepted as an efficient technique for clonal propagation of many woody plants. In the present research, we report the results of a number of experiments aimed at optimizing micropropagation protocol for tea (Camellia sinensis (L.) O. Kuntze) (clone Iran 100) using nodal segments as the explant. The effect of different combinations and concentrations of plant growth regulators (PGR) (BAP, TDZ, GA₃) on shoot multiplication and elongation was assessed. The influence of exposure to IBA in liquid form prior to transfer to solid media on rooting of tea microshoots was investigated. The results of this study showed that the best treatment for nodal segment multiplication in terms of the number of shoot per explant and shoot elongation was obtained using 3 mg/L BAP in combination with 0.5 mg/L GA₃. TDZ was found to be inappropriate for multiplication of tea clone Iran 100 as it resulted in hyperhydricity especially at concentrations higher than 0.05 mg/L. Healthy shoots treated with 300 mg/L IBA for 30 min followed by transfer to 1/2 strength MS medium devoid of PGR resulted in 72.3% of shoots producing roots and upon transferring them to acclimatization chamber 65% survival was obtained prior to field transfer.
This study focuses on the establishment of in vitro tuberization of Chlorophytum borivilianum using solid and liquid culture systems. A high in vitro tuberization rate on solid and stationary liquid Murashige and Skoog media was observed in the presence of 60 g l⁻¹ sucrose with 950, 1,265 and 1,580 µM 2-chloroethyl-trimethylammonium chloride (CCC). Application of a higher sucrose concentration of 90 g l⁻¹ showed a negative interaction with CCC on in vitro tuber number and days to in vitro tuber induction. For economic feasibility, 950 µM CCC with 60 g l⁻¹ sucrose was chosen as the best combination for in vitro tuberization in both solid and stationary liquid media. For optimization of in vitro tuber production,a comparison between solid, stationary liquid and shake liquid culture was carried out. Liquid culture with shaking at 80 r.p.m. resulted in a >2.5-fold increase in in vitro tuber production compared with solid culture.
Matched MeSH terms: Plant Shoots/growth & development
The effect of preculture with different sugars and mannitol on cryopreservation of scalps of the banana (Musa) cvs. Pisang Mas, Pisang Nangka, Pisang Berangan and Pisang Awak was investigated. Scalps (0.3 square cm) were precultured on semi-solid MS-based medium, containing 0.4 or 0.5 M sucrose, glucose, fructose, trehalose or mannitol, for 14 days under a 16 h light and 8 h dark photoperiod prior to rapid cooling and storage in liquid nitrogen. Explants were rewarmed rapidly in a water bath at 40 degree C for 1 min, followed by recovery on two layers of sterile filter paper overlaying 25 ml aliquots of semi-solid MS-based medium with 5 mg per liter benzylaminopurine, 0.2 mg per liter indole acetic acid and 10 mg per liter ascorbic acid (PM8 medium) for 2 days in the dark. Subsequently, scalps were transferred onto 25 ml aliquots of semi-solid PM8 medium and incubated in the dark for 1 week prior to incubation in the light. Shoot regeneration from 5 - 48 percent of cryopreserved scalps of all the banana cvs., was observed only following preculture with 0.4 or 0.5 M glucose or fructose, and with 0.4 M trehalose for the cvs. Pisang Berangan and Pisang Awak. Preculture with 0.4 M glucose resulted in maximum shoot regeneration of cryopreserved scalps of 10 percent, 13 percent, 42 percent and 48 percent for the cvs. Pisang Mas, Pisang Nangka, Pisang Berangan and Pisang Awak, respectively. Concentrations of 0.5 M trehalose, or 0.4 and 0.5 M sucrose or mannitol were extremely toxic to scalps of all the cvs. investigated.
Matched MeSH terms: Plant Shoots/growth & development
Fresh water, coupled with soil salinization in many areas has resulted in an increased need forscreening of salt tolerant turf grasses. Relative salinity tolerance of eightwarm season turfgrass species were examined in this study in sand culture. Grasses were grown in a glasshouse, irrigated with either distilled water or saline sea water adjusted to 24, 48 or 72 dSm-1. Salt tolerances of the grasses were assessed on the basis of their shoot and root growth, leaf firing and turf quality. Regression analysis indicated that Zoysiajaponica (Japanese lawn grass) (JG), Stenotaphrum secundatum (St. Augustine) (SA), Cynodon dactylon (satiri) (BS), Zoysia teneuifolia (Korean grass) (KG), Digitaria didactyla (Serangoon grass) (SG), Cynodon dactylon (Tifdwarf) (TD), Paspalum notatum (Bahia grass) (BG) and Axonopus compressus(Pearl blue) (PB) suffered a 50% shoot growth reduction at 36.0, 31.8, 30.9, 28.4, 26.4, 25.7, 20.0 and 18.6 dSm1 of salinity, respectively and a root growth reduction at44.9, 43.7, 33.4, 31.0, 29.5 27.5, 21.5 and 21.4 dSm- of salinity, respectively. Leaf firing and turf quality of the selected species, as a whole, were also found to be affected harmoniously with the change in root and shoot growth. On the basis of the experimental results the selected species were ranked for salinity tolerance as JG>SA>BS>KG>SG >TD>BG>PB.
Matched MeSH terms: Plant Shoots/growth & development
Nowadays, many researches were conducted in minimizing tissue culture technology due to the overhead of cost needed. The purpose of this study was to investigate the effects of using five kinds of organic additives at four level concentrations responsive to the number of shoots produced for eight weeks in culture. Stem segment explants of Celosia sp. were cultured on MS medium that have been supplemented with different kinds of extract juice that serve as organic additives which are mature coconut, young coconut, papaya, banana and tomato at 20, 30, 50 and 70 ml L-1. The numbers of shoot on each explant were recorded and the mean of ten replicates explants were calculated. Among the media used, young coconut water at 70 ml L1- induced the highest shoot regeneration (14.21+/-8.26), followed by mature coconut water at 50 ml L-1 (13.14+/-10.33). Banana and tomato juice promote highest shoot regeneration of stem segments at 50 ml L-1 that produced 9.57+/-4.68 and 9.28+/-5.82 shoots per explants, respectively. While the lowest concentration which at 20 ml L-1 of papaya juice showed highest shoot regeneration (10.50+/-3.45) produced among the three other concentration tested. Statistical results showed that there were significant differences interactions effects (p<0.05) in terms of number of shoot regenerated between the types of extracts juices determined by ANOVA test. Comparing number of shoots regenerated that were cultured in control media, it showed higher than all of experimental medium composition. There were no big different in cost required in preparation of control media and the experimental media. Applications of five kinds of local fruit in tissue culture media should be considered since it responsive in shoot regeneration.
Matched MeSH terms: Plant Shoots/growth & development
Allometry of shoot extension units (hereafter termed "current shoots") was analyzed in a Malaysian canopy species, Elateriospermum tapos Bl. (Euphorbiaceae). Changes in current shoot allometry with increasing tree height were related to growth and maintenance of tree crowns. Total biomass, biomass allocation ratio of non-photosynthetic to photosynthetic organs, and wood density of current shoots were unrelated to tree height. However, shoot structure changed with tree height. Compared with short trees, tall trees produced current shoots of the same mass but with thicker and shorter stems. Current shoots with thin and long stems enhanced height growth in short trees, whereas in tall trees, thick and short current shoots may reduce mechanical and hydraulic stresses. Furthermore, compared with short trees, tall trees produced current shoots with more leaves of lower dry mass, smaller area, and smaller specific leaf area (SLA). Short trees adapted to low light flux density by reducing mutual shading with large leaves having a large SLA. In contrast, tall trees reduced mutual shading within a shoot by producing more small leaves in distal than in proximal parts of the shoot stem. The production of a large number of small leaves promoted light penetration into the dense crowns of tall trees. All of these characteristics suggest that the change in current shoot structure with increasing tree height is adaptive in E. tapos, enabling short trees to maximize height growth and tall trees to maximize light capture.
Matched MeSH terms: Plant Shoots/growth & development
Aluminium (Al) phytotoxicity is an important soil constraint that limits crop yield. The objectives of this study were to investigate how growth, physiology, nutrient content and organic acid concentration is affected by Al, and to assess the degree of Al tolerance in different oil palm progeny (OPP). Four OPPs ['A' (Angola dura × Angola dura), 'B' (Nigerian dura × Nigerian dura), 'C' (Deli dura × AVROS pisifera) and 'D' (Deli dura × Dumpy AVROS pisifera)] were grown in different Al concentrations (0, 100 and 200 μm) in aerated Hoagland solution, pH 4.4, for 80 days. We observed a severe reduction (57.5%) in shoot dry weight, and root tips were reduced by 46.5% in 200 μm Al. In 'B' and 'C', the majority of macro- and micronutrients in plants were reduced significantly by 200 μm Al, with Mg being lowered by more than 50% in roots and shoots. The 200 μm Al treatment resulted in a 56.50% reduction in total leaf area, a 20% reduction in net photosynthesis and a 17% reduction in SPAD chlorophyll value in the third leaf. Root tips (0-5 mm) showed a significant increase in oxalic acid content with increasing Al concentration (∼ 5.86-fold); progeny 'A' had the highest concentration of oxalic acid. There was a significant interaction between Al concentration × OPP on total leaf number, root volume, lateral root length, Mg and K in root and shoot tissues, and Ca and N in shoots. The OPPs could be ranked in their tolerance to Al as: 'A' > 'D' > 'B' > 'C'.
Matched MeSH terms: Plant Shoots/growth & development
Dendrobium sonia-28 is a popular orchid hybrid due to its flowering recurrence and dense inflorescences. Unfortunately, it is being decimated by fungal diseases, especially those caused by Fusarium proliferatum. In this study, selection of F. proliferatum-tolerant protocorm-like bodies (PLBs) was carried out by assessing the effects of differing concentrations of fusaric acid (FA). PLBs were cultured on Murashige and Skoog (MS) medium supplemented with 0.05 to 0.2 millimolar (mM) concentrations of FA. Higher concentrations of FA increased mortality of PLBs and reduced their growth. The survival rate for 0.05 mM FA was 20 % but only 1 % at the highest dose of 0.2 mM. Additionally, two different size ranges of PLBs were investigated, and growth increased more at lower FA concentrations for larger PLBs, whilst the growth rate of smaller PLBs was inhibited at an FA concentration of 0.2 mM. Histological examination using transmission electron microscopy (TEM) and scanning electron microscopy (SEM) analyses disclosed severe cell wall and organelle damage, as well as stomatal closure in PLBs treated with the high FA concentrations. Reductions in plantlet growth were much greater at the highest concentrations of FA. Some randomly amplified polymorphic DNA (RAPD) markers clearly discriminated between selected and non-selected variants of Dendrobium sonia-28, showing different banding patterns for each FA concentration and specific bands for selected and control plants.
The present study investigates the effects of different concentrations, as well as type of plant growth regulators (PGRs) and medium (MS, Duchefa) on the growth and development of Centella asiatica in semi-solid culture. In addition, a protocol for successful sterilization of C.asiatica explants prepared from field-grown plants highly exposed to fungal and bacterial contamination was determined. Results for sterilization treatments revealed that applying HgCl₂ and Plant Preservative Mixture (PPM) with cetrimide, bavistin and trimethoprim which were included after washing with tap water, followed by the addition of PPM in the medium, produced a very satisfactory result (clean culture 90 ± 1.33%) and TS5 (decon + cetrimide 1% + bavistin 150 mg/L + trimethoprim 50 mg/L + HgCl₂0.1% + PPM 2% soak and 2 mL/L in medium) was hence chosen as the best method of sterilization for C.asiatica. The synergistic combination of 6 benzylaminopurine (BAP) and 1-naphthaleneacetic acid (NAA) in concentrations of 2 mg/L and 0.1 mg/L, respectively, in Duchefa medium compared with MS induced the most optimal percentage of sprouted shoots (93 ± 0.667), number of shoots (5.2 ± 0.079) and nodes (4 ± 0.067) per explant, leaf per explant (14 ± 0.107) and shoot length (4.1 ± 0.67 cm). Furthermore, optimum rooting frequency (95.2 ± 0.81%), the number of roots/shoot (7.5 ± 0.107) and the mean root length (4.5 ± 0.133 cm) occurred for shoots that were cultured on full-strength MS medium containing 0.5 mg/L indole-3-butyric acid (IBA). In this study, the acclimatized plantlets were successfully established with almost 85% survival. The findings of this study have proven an efficient medium and PGR concentration for the mass propagation of C.asiatica. These findings would be useful in micropropagation and ex situ conservation of this plant.
Matched MeSH terms: Plant Shoots/growth & development
An Agrobacterium-mediated transformation method was applied to introduce the luciferase reporter gene under the control of the CaMV35S promoter in the pGreen0049 binary vector into strawberry cv. Camarosa. The in vitro regeneration system of strawberry leaves to be used in the transformation was optimized using different TDZ concentrations in MS medium. TDZ at 16 µM showed the highest percentage (100%) of shoot formation and the highest mean number of shoots (24) produced per explant. Studies on the effects of different antibiotics, namely timentin, cefotaxime, carbenicillin and ampicillin, on shoot regeneration of strawberry leaf explants showed the best shoot regeneration in the presence of 300 mg/L timentin and 150 mg/L cefotaxime. Assessment of the different factors affecting Agrobacterium mediated-transformation of strawberry with the luciferase gene showed the highest efficiency of putative transformant production (86%) in the treatment with no preculture, bacterial OD600 of 0.6 and the addition of 150 mg/L cefotaxime in the pre-selection and selection media. The presence of the luciferase gene in the plant genome was verified by the luciferase reporter gene assay, nested PCR amplification and dot blot of genomic DNA isolated from the young leaves of each putatively transformed plantlet.
Tissue culture studies of Celosia cristata were established from various explants and the effects of various hormones on morphogenesis of this species were examined. It was found that complete plant regeneration occurred at highest percentage on MS medium supplemented with 2.0 mg/L NAA and 1.5 mg/L BAP, with the best response showed by shoot explants. In vitro flowering was observed on MS basal medium after six weeks. The occurrence of somaclonal variation and changes in cellular behavior from in vivo and in vitro grown plants were investigated through cytological studies and image analysis. It was observed that Mitotic Index (MI), mean chromosome numbers, and mean nuclear to cell area ratio of in vitro root meristem cells were slightly higher compared to in vivo values. However, in vitro plants produced lower mean cell areas but higher nuclear areas when compared to in vivo plants. Thus, no occurrence of somaclonal variation was detected, and this was supported by morphological features of the in vitro plants.
Matched MeSH terms: Plant Shoots/growth & development
In the present study, various explants of Murraya paniculata (Jack) Linn., such as cotyledons, shoots and young stems were cultured on MS medium supplemented with various concentrations of Benzyl Amino Purine (BAP) under 25 +/- 1 degree C with 16 h light and 8 h dark and also 8 h light and 16 h dark to obtain complete plant regeneration. In vitro flowering was observed from shoot explants cultured on MS supplemented with 0.5-2.0 mg L(-1) Naphthalene Acetic Acid (NAA) and also on MS basal medium under similar conditions. The leaves and flowers obtained from both in vivo and in vitro conditions were examined and compared. Morphological studies such as leaf clearing, epidermal peeling were studied using light and scanning electron microscope. Macromorphological studies of the flowers produced from in vivo and in vitro conditions were also examined. Morphologically, there were no differences between in vivo and in vitro flowers except the flowers produced from tissue culture systems were smaller in size with protruding stigmas. Differences were also found in the number of layers of palisade cells and the presence or absence of epicuticle layer of the leaves. Leaves produced from tissue culture system were smaller in size with membranous texture. Stomata were present only on the abaxial surfaces of both in vivo and in vitro leaves but the stomata were raised above the epidermis in the latter.
Matched MeSH terms: Plant Shoots/growth & development