Displaying publications 1 - 20 of 152 in total

Abstract:
Sort:
  1. Chen PCY
    Trop Geogr Med, 1973 Mar;25(1):95-9.
    PMID: 4694004
    Three indigenous Malay surgical procedures, namely circumcision by the mudim, bone-setting by the bomoh patah and cupping, are described. It is noted that complications are associated with both circumcision and bone-setting, and suggestions are made of possible health measures to cope with the situation.
    Matched MeSH terms: Fracture Fixation*
  2. Anuar Ramdhan I, Zulmi W, Hidayah A, Kamel M, Fadhil M, Anwar Hau M
    Malays Orthop J, 2013 Mar;7(1):52-5.
    PMID: 25722808 MyJurnal DOI: 10.5704/MOJ.1303.017
    Coaptive film (i.e., Steri-Strips™) is an adhesive tape used to replace sutures in wound closure. The use of coaptive film for wound closure after long bone fracture fixation has not been well documented in the literature.
    Matched MeSH terms: Fracture Fixation
  3. Hwang PX, Anuwar NA, Khaw YC, Hadizie D
    Malays Orthop J, 2020 Mar;14(1):74-77.
    PMID: 32296485 DOI: 10.5704/MOJ.2003.011
    Coronal malalignment due to malrotated trochanteric nail placement in femoral fracture fixation has never been reported. We present a case of a femoral segmental fracture fixed with a trochanteric nail, with a malrotated placement resulting in a valgus malaligned nail and femur, associated with a rotational malalignment. Knowledge of the modern nail design with proper intra-operative precautions, would avoid this underestimated technical error.
    Matched MeSH terms: Fracture Fixation
  4. Zairul-Nizam, Z.F.
    MyJurnal
    Femoral fractures are one of the commonest fractures encountered in orthopaedic practice. Over the years, treatment of this injury has evolved tremendously. The initial non-operative methods of reduction and stabilization have largely been replaced by operative fixation. There are currently three basic modes of internal fixation of femoral diaphyseal fractures in the adult age group: plate and screws, intramedullary Kuntscher nailing, and interlocking nailing. The objective of this study is to determine whether the so-called more ‘technologically advanced’ interlocking nailing results in better outcome compared to the more ‘traditional’ plate and screws, and Kuntscher nailing. It is found that, in terms of time to union and final function after an average of just under 2 years post-operative period, the group of patients who had interlocking nailing fared poorer. A review of relevant literature will then be presented.
    Matched MeSH terms: Fracture Fixation, Internal; Fracture Fixation, Intramedullary
  5. Nazimi AJ, Ezulia T, Rajaran JR, Mohd Yunus SS, Nabil S
    Case Rep Dent, 2017;2017:2732907.
    PMID: 29391956 DOI: 10.1155/2017/2732907
    We describe a case of extensively comminuted mandibular fracture that extends bilaterally to the angle of mandible successfully treated with the use of condylar positioning device (CPD). This simple, yet effective, technique that almost exclusively described in orthognathic surgery is useful when advance surgical techniques such as pre- or intraoperative landmark identification may not be readily available. CPD technique optimizes the manual manipulations of the comminuted distal segments during fracture reduction and internal fixation. At the same time, it allows greater control of the proximal segments to avoid further surgical complication.
    Matched MeSH terms: Fracture Fixation; Fracture Fixation, Internal
  6. Noor MA
    Injury, 1988 Nov;19(6):377-8.
    PMID: 3267638
    A simple and inexpensive external fixator has been designed. It is constructed of galvanized iron pipe and mild steel bolts and nuts. It can easily be manufactured in a hospital workshop with a minimum of tools.
    Matched MeSH terms: Fracture Fixation, Internal/economics; Fracture Fixation, Internal/instrumentation*
  7. Rughubar V, Vares Y, Singh P, Filipsky A, Creanga A, Iqbal S, et al.
    J Oral Maxillofac Surg, 2020 Oct;78(10):1781-1794.
    PMID: 32589939 DOI: 10.1016/j.joms.2020.05.012
    PURPOSE: We aimed to compare complication rates and functional outcomes in patients with bilateral mandibular fractures treated with different degrees of internal fixation rigidity.

    PATIENTS AND METHODS: This international, multicenter randomized controlled trial included adults with bilateral mandibular fractures located at either the angle and body, angle and symphysis, or body and symphysis. Patients were treated with either a combination of rigid fixation for the anterior fracture and nonrigid fixation for the posterior fracture (mixed fixation) or nonrigid fixation for both fractures. The primary outcome was complications within 6 weeks after surgery. Secondary outcomes were complications within 3 months, Helkimo dysfunction index, and mandibular mobility at 6 weeks and 3 months after surgery.

    RESULTS: Of the 315 patients enrolled, 158 were randomized to the mixed fixation group and 157 to the nonrigid fixation group. The overall complication rate at 6 weeks in the intention-to-treat population was 9.6% (95% confidence interval [CI], 5.3% to 15.6%) in the mixed fixation group and 7.8% (95% CI, 4.0% to 13.5%) in the nonrigid fixation group. With an unadjusted odds ratio of 1.25 (95% CI, 0.51 to 3.17), there were no statistically significant differences in complication rates between the 2 groups (P = .591). A multivariable model for complication risk at 6 weeks found no significant differences between treatment groups, but patients with moderate or severe displacement had a higher complication rate than those with no or minimal displacement (adjusted odds ratio, 4.58; 95% CI, 1.16 to 18.06; P = .030). There were no significant between-group differences in complication rates at 3 months. Moreover, no significant differences in Helkimo dysfunction index and mandibular mobility index at 6 weeks and 3 months were found between groups according to treatment allocated and treatment received.

    CONCLUSIONS: A combination of rigid and nonrigid fixation in patients with bilateral mandibular fracture has similar complication rates and functional outcomes to nonrigid fixation for both fractures.

    Matched MeSH terms: Fracture Fixation; Fracture Fixation, Internal*
  8. Azhar S, Abdullah S, Soh E
    J Hand Surg Eur Vol, 2023 Mar;48(3):279-281.
    PMID: 36691295 DOI: 10.1177/17531934221148115
    Matched MeSH terms: Fracture Fixation, Intramedullary*
  9. Sermon A, Hofmann-Fliri L, Zderic I, Agarwal Y, Scherrer S, Weber A, et al.
    Medicina (Kaunas), 2021 Aug 28;57(9).
    PMID: 34577822 DOI: 10.3390/medicina57090899
    Background and Objectives: Hip fractures constitute the most debilitating complication of osteoporosis with steadily increasing incidences in the aging population. Their intramedullary nailing can be challenging because of poor anchorage in the osteoporotic femoral head. Cement augmentation of Proximal Femoral Nail Antirotation (PFNA) blades demonstrated promising results by enhancing cut-out resistance in proximal femoral fractures. The aim of this study was to assess the impact of augmentation on the fixation strength of TFN-ADVANCEDTM Proximal Femoral Nailing System (TFNA) blades and screws within the femoral head and compare its effect when they are implanted in centre or anteroposterior off-centre position. Materials and Methods: Eight groups were formed out of 96 polyurethane low-density foam specimens simulating isolated femoral heads with poor bone quality. The specimens in each group were implanted with either non-augmented or cement-augmented TFNA blades or screws in centre or anteroposterior off-centre positions, 7 mm anterior or posterior. Mechanical testing was performed under progressively increasing cyclic loading until failure, in setup simulating an unstable pertrochanteric fracture with a lack of posteromedial support and load sharing at the fracture gap. Varus-valgus and head rotation angles were monitored. A varus collapse of 5° or 10° head rotation was defined as a clinically relevant failure. Results: Failure load (N) for specimens with augmented TFNA head elements (screw/blade centre: 3799 ± 326/3228 ± 478; screw/blade off-centre: 2680 ± 182/2591 ± 244) was significantly higher compared with respective non-augmented specimens (screw/blade centre: 1593 ± 120/1489 ± 41; screw/blade off-centre: 515 ± 73/1018 ± 48), p < 0.001. For both non-augmented and augmented specimens failure load in the centre position was significantly higher compared with the respective off-centre positions, regardless of the head element type, p < 0.001. Augmented off-centre TFNA head elements had significantly higher failure load compared with non-augmented centrally placed implants, p < 0.001. Conclusions: Cement augmentation clearly enhances the fixation stability of TFNA blades and screws. Non-augmented blades outperformed screws in the anteroposterior off-centre position. Positioning of TFNA blades in the femoral head is more forgiving than TFNA screws in terms of failure load.
    Matched MeSH terms: Fracture Fixation, Intramedullary*
  10. Tan E, Chua H, Ooi C, Zulkiflee O
    Malays Orthop J, 2012 Nov;6(3):60-2.
    PMID: 25279062 MyJurnal DOI: 10.5704/MOJ.1207.009
    Total talus dislocation is a rare injury and is commonly accompanied by associated fractures. Common worrisome sequelae are infection, avascular necrosis and post-traumatic arthritis. We report here on a patient who sustained an open total talus dislocation with an ipsilateral medial malleolus fracture. Following early debridement, reduction and a combination of internal and external fixations, early recovery was good with no evidence of avascular necrosis.
    Matched MeSH terms: Fracture Fixation
  11. Anuar-Ramdhan IM, Azahari IM, Med Orth M
    Malays Orthop J, 2014 Nov;8(3):33-6.
    PMID: 26401234 MyJurnal DOI: 10.5704/MOJ.1411.008
    The diaphyseal tibia fracture is best treated with intramedullary nail but in some cases where the nail is not applicable, plate fixation will be the next option of fixation. The extensile anterior approach is normally used for conventional compression plate fixation in tibia shaft fractures. The extensive surgical dissection may devitalizes the bony fragments and interfere with the fracture union as well as soft tissue healing. Minimally Invasive Plate Osteosynthesis (MIPO) provides good preservation of blood supply and fracture hematoma at the fracture site thus promotes biological bone healing. The use of indirect reduction techniques and small skin incisions to introduce the plate is technically demanding and requires fluoroscopy exposures throughout the surgery, being some of its drawbacks. We recommend MIPO for conventional compression plate fixation in tibial shaft fractures in view of the reduced surgical trauma to the surrounding soft tissue and good functional outcome.
    Matched MeSH terms: Fracture Fixation, Internal
  12. Henry Lee Thian Lin
    Dent J Malaysia Singapore, 1969 May;9(1):40-6.
    PMID: 5258333
    Matched MeSH terms: Fracture Fixation
  13. Gan JT, Chandrasekaran SK, Tuan Jusoh TB
    Acta Orthop Traumatol Turc, 2020 Sep;54(5):483-487.
    PMID: 33155556 DOI: 10.5152/j.aott.2020.19219
    OBJECTIVE: The aim of this study was to compare the clinical outcomes and operative cost of a locked compression plate (LCP) and a nonlocked reconstruction plate in the treatment of displaced midshaft clavicle fracture.

    METHODS: From January 2013 till March 2018, a total of 55 patients with acute unilateral closed midshaft clavicle fracture were treated with either a 3.5-mm pre-contoured LCP [32 patients; 25 men and 7 women; mean age: 35 years (range: 19-63 years)] or a 3.5-mm nonlocked reconstruction plate [23 patients; 20 men and 3 women; mean age: 31.4 years (range: 17-61 years)]. The clinical outcomes in terms of fracture union, Quick Disability of Arm, Shoulder and Hand (DASH) score, implant irritation, failure rate, and reoperation rate were evaluated retrospectively. The patient billing records were reviewed to obtain primary operation, reoperation, and total operative cost for midshaft clavicle fracture. These values were analyzed and converted from Malaysia Ringgit (RM) to United States Dollar (USD) at the exchange rate of RM 1 to USD 0.24. All patients were followed up for at least one-year duration.

    RESULTS: The mean time to fracture union, implant irritation, implant failure, and reoperation rate showed no significant difference between the two groups of patients. The mean Quick DASH score was significantly better in the reconstruction plate group with 13 points compared with 28 points in the LCP group (p=0.003). In terms of total operative cost, the LCP group recorded a cost of USD 391 higher than the reconstruction plate group (p<0.001).

    CONCLUSION: The 3.5-mm reconstruction plate achieved not only satisfactory clinical outcomes but was also more cost-effective than the LCP in the treatment of displaced midshaft clavicle fractures.

    LEVEL OF EVIDENCE: Level III, Therapeutic study.

    Matched MeSH terms: Fracture Fixation, Internal/economics; Fracture Fixation, Internal/instrumentation; Fracture Fixation, Internal/methods
  14. Shahrulazua, A., Ariff, M.S., Aziz, M.A.
    Malays Orthop J, 2010;4(1):35-38.
    MyJurnal
    Fat embolism syndrome is a well-recognised sequela of long bone trauma as well as intramedullary orthopaedic procedures. However, it has rarely been described following manipulation, reduction of fracture, and application of external fixator. Furthermore, bilateral ocular blindness is seldom the first manifestation; instead respiratory and other cerebral symptoms being most common. We describe a case with this rare presentation in a patient who underwent a trial of closed reduction, then open reduction of a femur fracture, followed by external fixation performed at day 47 post-initial trauma.
    Matched MeSH terms: Fracture Fixation
  15. Johar, M.J., Bala Krishnian M, Mohd Radhi, A., Saadah, N.A., Gan, K.B., Ismail, M.S.
    Medicine & Health, 2012;7(1):1-11.
    MyJurnal
    Uncontrolled bleeding due to pelvic fractures contributes to trauma-related morbidity and mortality. Three main strategies that have been outlined to combat this condition which include reduction of pelvic volume that lead to tamponade-like effect, arresting haemorrhage through angioembolization of the major vessels, and stabilization of the pelvic bone with external fixation need to be initiated early. A prehospital device that allow these strategies will aid significantly in the management of the patient. At present most devices used to treat pelvic fractures in the pre-hospital setting do have its’ own advantages but also have some limitations. A characteristic ‘wish-list’ of a good pelvic and lower limb immobilization device was created and the research team from UKM takes the challenge to design and produce a device that concurs to it. A two phase development project that incorporate anthropometric, biomechanical, cadaveric and radiological study was carried out over a period of seven years. Finally, BRIMTM immobilizer, a new pelvic and lower limb immobilization device that is user friendly, tough, cost effective, radiolucent, light and reusable that answers most of the requirement of a good device was invented.
    Matched MeSH terms: Fracture Fixation
  16. Ling, H.T., Ng, W.M., Kwan, M.K., Fathi Aizuddeen, L.K., Tay, P.C.M.
    Malays Orthop J, 2008;2(1):17-22.
    MyJurnal
    Interlocked intramedullary nailing is accepted as the gold standard for femoral shaft fractures. However for Winquist type I and II femoral fractures at the isthmus region, unlocked intramedullary nailing (Küntscher nailing) is still a good option. We performed a retrospective study on 86 patients with a total of 88 femoral shaft fractures around the isthmus that presented at our institution between 1 January 1988 and 31 August 2003. All patients (84.1% Winquist type I and 15.9% Winquist Type II fractures) were treated with unlocked intramedullary nail. The average time to union was 16 weeks with 97.7% rate of union. There were two cases (2.3%) of infection and non-union each. Overall results were comparable to standard interlocking intramedullary nailing. We conclude that unlocked intramedullary nailing is a good treatment option for Winquist Type I and II femoral fracture around the isthmus with its good union rate and minimal complications.
    Matched MeSH terms: Fracture Fixation, Intramedullary
  17. Yu, C.K., Wong, H.Y., Vivek, A.S., To, BC Se
    Malays Orthop J, 2008;2(1):23-27.
    MyJurnal
    Interlocking intramedullary nailing is suitable for comminuted femoral isthmus fractures, but for noncomminuted fractures its benefit over unlocked nailing is debatable. This study was undertaken to compare outcomes of interlocking nailing versus unlocked intramedullary nailing in such fractures. Ninety-three cases of noncomminuted femoral isthmus fractures (Winquist I and II) treated with interlocking nailing and unlocked nailing from 1 June 2004 to 1 June 2005 were reviewed; radiological and clinical union rates, bony alignment, complication and knee function were investigated. There was no statistical significant difference with regard to union rate, implant failure, infection and fracture alignment in both study groups. Open fixation with unlocked femoral nailing is technically less demanding and requires less operating time; additionally, there is no exposure to radiation and cost of the implant is cheaper. We therefore conclude that unlocked nailing is still useful for the management of non-comminute isthmus fractures of the femur.
    Matched MeSH terms: Fracture Fixation, Intramedullary
  18. Khairul Nizam Siron, Lim, Chia Hua
    MyJurnal
    Neer first popularised the use of primary hemiarthroplasty to treat complex proximal
    humerus fractures, especially when the humeral head is nonviable or not
    reconstructable with internal fixations, and with younger patients. (Copied from article).
    Matched MeSH terms: Fracture Fixation, Internal
  19. Kamarul Izham Kamarudin, Nur Dini Mohd Yusof, Suresh Chopra
    MyJurnal
    Open reduction and internal fixation using
    conventional lateral distal femur locking plate is a
    standard operative method for distal femur fracture.
    This case series describes medial plating of distal
    femur fracture using proximal tibia locking plate that
    is anatomically fit to the medial aspect of distal femur,
    by the minimally invasive plate osteosynthesis (MIPO)
    technique which gives a stable construct with good
    outcome.
    Matched MeSH terms: Fracture Fixation, Internal
  20. Sinha NK, Bhardwaj A
    Clin Orthop Surg, 2019 12;11(4):495.
    PMID: 31788175 DOI: 10.4055/cios.2019.11.4.495
    Matched MeSH terms: Fracture Fixation, Internal
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links