Displaying publications 1 - 20 of 76 in total

Abstract:
Sort:
  1. Evaluation of solid-state bioconversion of domestic wastewater sludge as a promising environmental-friendly disposal technique
    Hossain Molla A, Fakhru'l-Razi A, Zahangir Alam M
    Water Res, 2004 Nov;38(19):4143-52.
    PMID: 15491662
    Natural and environmental-friendly disposal of wastewater sludge is a great concern. Recently, biological treatment has played prominent roles in bioremediation of complex hydrocarbon- rich contaminants. Composting is quite an old biological-based process that is being practiced but it could not create a great impact in the minds of concerned researchers. The present study was conducted to evaluate the feasibility of the solid-state bioconversion (SSB) processes in the biodegradation of wastewater sludge by exploiting this promising technique to rejuvenate the conventional process. The Indah Water Konsortium (IWK) domestic wastewater treatment plant (DWTP) sludge was considered for evaluation of SSB by monitoring the microbial growth and its subsequent roles in biodegradation under two conditions: (i) flask (F) and (ii) composting bin (CB) cultures. Sterile and semi-sterile environments were allowed in the F and the CB, respectively, using two mixed fungal cultures, Trichoderma harzianum with Phanerochaete chrysosporium 2094 (T/P) and T. harzianum with Mucor hiemalis (T/M) and two bulking materials, sawdust (SD) and rice straw (RS). The significant growth and multiplication of both the mixed fungal cultures were reflected in soluble protein, glucosamine and color intensity measurement of the water extract. The color intensity and pH of the water extract significantly increased and supported the higher growth of microbes and bioconversion. The most encouraging results of microbial growth and subsequent bioconversion were exhibited in the RS than the SD. A comparatively higher decrease of organic matter (OM) % and C/N ratio were attained in the CB than the F, which implied a higher bioconversion. But the measurement of soluble protein, glucosamine and color intensity exhibited higher values in the F than the CB. The final pH drop was higher in the CB than the F, which implied that a higher nitrification occurred in the CB associated with a higher release of H+ ions. Both the mixed cultures performed almost equal roles in all cases except the changes in moisture content.
  2. Fulltext Assessment of heavy metals contamination and human health risk in shrimp collected from different farms and rivers at Khulna-Satkhira region, Bangladesh
    Sarkar T, Alam MM, Parvin N, Fardous Z, Chowdhury AZ, Hossain S, et al.
    Toxicol Rep, 2016;3:346-350.
    PMID: 28959555 DOI: 10.1016/j.toxrep.2016.03.003
    This study is aimed to assess the heavy metals contamination and health risk in Shrimp (Macrobrachium rosenbergii and Penaeus monodon) collected from Khulna-Satkhira region in Bangladesh. The results showed that the Pb concentrations (0.52-1.16 mg/kg) in all shrimp samples of farms were higher than the recommended limit. The Cd levels (0.05-0.13 mg/kg) in all samples and Cr levels in all farms except tissue content at Satkhira farm were higher than the permissible limits. The individual concentration of Pb, Cd, and Cr between shrimp tissue and shell in all rivers and farms were not statistically significant (P > 0.05). Target hazard quotient (THQ) and hazard index (HI) were estimated to assess the non-carcinogenic health risks. Shrimp samples from all locations under the current study were found to be safe for consumption, the possibility of health risk associated with non-carcinogenic effect is very low for continuous consumption for 30 years.
  3. Fulltext Management of mango hopper, Idioscopus clypealis, using chemical insecticides and Neem oil
    Adnan SM, Uddin MM, Alam MJ, Islam MS, Kashem MA, Rafii MY, et al.
    ScientificWorldJournal, 2014;2014:709614.
    PMID: 25140344 DOI: 10.1155/2014/709614
    An experiment was conducted in Field Laboratory, Department of Entomology at Bangladesh Agricultural University, Mymensingh, during 2013 to manage the mango hopper, Idioscopus clypealis L, using three chemical insecticides, Imidacloprid (0.3%), Endosulfan (0.5%), and Cypermethrin (0.4%), and natural Neem oil (3%) with three replications of each. All the treatments were significantly effective in managing mango hopper in comparison to the control. Imidacloprid showed the highest efficacy in percentage of reduction of hopper population (92.50 ± 9.02) at 72 hours after treatment in case of 2nd spray. It also showed the highest overall percentage of reduction (88.59 ± 8.64) of hopper population and less toxicity to natural enemies including green ant, spider, and lacewing of mango hopper. In case of biopesticide, azadirachtin based Neem oil was found effective against mango hopper as 48.35, 60.15, and 56.54% reduction after 24, 72, and 168 hours of spraying, respectively, which was comparable with Cypermethrin as there was no statistically significant difference after 168 hours of spray. Natural enemies were also higher after 1st and 2nd spray in case of Neem oil.
  4. Fulltext Big data: survey, technologies, opportunities, and challenges
    Khan N, Yaqoob I, Hashem IA, Inayat Z, Ali WK, Alam M, et al.
    ScientificWorldJournal, 2014;2014:712826.
    PMID: 25136682 DOI: 10.1155/2014/712826
    Big Data has gained much attention from the academia and the IT industry. In the digital and computing world, information is generated and collected at a rate that rapidly exceeds the boundary range. Currently, over 2 billion people worldwide are connected to the Internet, and over 5 billion individuals own mobile phones. By 2020, 50 billion devices are expected to be connected to the Internet. At this point, predicted data production will be 44 times greater than that in 2009. As information is transferred and shared at light speed on optic fiber and wireless networks, the volume of data and the speed of market growth increase. However, the fast growth rate of such large data generates numerous challenges, such as the rapid growth of data, transfer speed, diverse data, and security. Nonetheless, Big Data is still in its infancy stage, and the domain has not been reviewed in general. Hence, this study comprehensively surveys and classifies the various attributes of Big Data, including its nature, definitions, rapid growth rate, volume, management, analysis, and security. This study also proposes a data life cycle that uses the technologies and terminologies of Big Data. Future research directions in this field are determined based on opportunities and several open issues in Big Data domination. These research directions facilitate the exploration of the domain and the development of optimal techniques to address Big Data.
  5. Fulltext Combining ability of pod yield and related traits of groundnut (Arachis hypogaea L.) under salinity stress
    Azad MA, Shah-E-Alam M, Hamid MA, Rafii MY, Malek MA
    ScientificWorldJournal, 2014;2014:589586.
    PMID: 24737982 DOI: 10.1155/2014/589586
    A study was performed using 6 × 6 F1 diallel population without reciprocals to assess the mode of inheritance of pod yield and related traits in groundnut with imposed salinity stress. Heterosis was found for pod number and yield. Data on general and specific combining ability (gca and sca) indicated additive and nonadditive gene actions. The gca: sca ratios were much less than unity suggesting predominant role of nonadditive gene effects. Cultivars "Binachinabadam-2" and "Dacca-1" and mutant M6/25/64-82 had the highest, second highest, and third highest pod number, as well as gca values, respectively. These two cultivars and another mutant M6/15/70-19 also had the highest, second highest, and third highest pod yield, as well as gca values, respectively. Therefore, "Dacca-1", "Binachinabadam-2", M6/25/64-82, and M6/15/70-19 could be used as source of salinity tolerance. Cross combinations showing high sca effects arising from parents with high and low gca values for any trait indicate the influence of nonadditive genes on their expression. Parents of these crosses can be used for biparental mating or reciprocal recurrent selection for developing high yielding varieties. Crosses with high sca effects having both parents with good gca effects could be exploited by pedigree breeding to get transgressive segregants.
  6. Fulltext Mechanism and design analysis of articulated ankle foot orthoses for drop-foot
    Alam M, Choudhury IA, Bin Mamat A
    ScientificWorldJournal, 2014;2014:867869.
    PMID: 24892102 DOI: 10.1155/2014/867869
    Robotic technologies are being employed increasingly in the treatment of lower limb disabilities. Individuals suffering from stroke and other neurological disorders often experience inadequate dorsiflexion during swing phase of the gait cycle due to dorsiflexor muscle weakness. This type of pathological gait, mostly known as drop-foot gait, has two major complications, foot-slap during loading response and toe-drag during swing. Ankle foot orthotic (AFO) devices are mostly prescribed to resolve these complications. Existing AFOs are designed with or without articulated joint with various motion control elements like springs, dampers, four-bar mechanism, series elastic actuator, and so forth. This paper examines various AFO designs for drop-foot, discusses the mechanism, and identifies limitations and remaining design challenges. Along with two commercially available AFOs some designs possess promising prospective to be used as daily-wear device. However, the design and mechanism of AFO must ensure compactness, light weight, low noise, and high efficiency. These entailments present significant engineering challenges to develop a new design with wide consumer adoption.
  7. Advanced oxidation of polycyclic aromatic hydrocarbons in tropical soil: Self-catalytic utilization of natural iron contents in an oxygenation reactor supported with persulfate
    Qutob M, Rafatullah M, Muhammad SA, Siddiqui MR, Alam M
    Sci Total Environ, 2024 May 20;926:171843.
    PMID: 38521259 DOI: 10.1016/j.scitotenv.2024.171843
    The catalysts derived from natural iron minerals in the advanced oxidation process offer several advantages. However, their utilization in soil remediation is restricted due to the presence of soil impurities, which can inhibit the catalytic activity of these minerals. The soils in tropical regions exhibit lower organic matter content, limited cation exchange capacity, and are non-saline, this enhances the efficiency of utilizing natural iron minerals from tropical soil as a catalyst. In this regard, the catalytic potential of naturally iron-bearing tropical soil was investigated to eliminate phenanthrene (PHE), pyrene (PYR), and benzo[α]pyrene (B[α]P) using an oxygenated reactor supported with persulfate (PS). The system showed an efficient performance, and the removal efficiencies under the optimum conditions were 81 %, 73 %, and 86 % for PHE, PYR, and B[α]P, respectively. This indicated that the catalytic activity of iron was working efficiently. However, there were changes in the soil characteristics after the remediation process such as a significant reduction in iron and aluminum contents. The scavenging experiments demonstrated that HO• had a minor role in the oxidation process, SO4•- and O2•- emerged as the primary reactive species responsible for the effective degradation of the PAHs. Moreover, the by-products were monitored after soil remediation to evaluate their toxicity and to propose degradation pathways. The Mutagenicity test showed that two by-products from each PHE and B[α]P had positive results, while only one by-product of PYR showed positive. The toxicity tests of oral rat LD50 and developmental toxicity tests revealed that certain PAHs by-products could be more toxic from the parent pollutant itself. This study represents a notable progression in soil remediation by providing a step forward in the application of the advanced oxidation process (AOP) without requiring additional catalysts to activate oxidants and degrade pollutant PAHs from the soil.
  8. Fulltext Impact of various aligner auxiliaries on orthodontic activity: A systematic review and network meta-analysis
    Khursheed Alam M, Hajeer MY, Shqaidef A, Alswairki HJ, Alfawzan AA, Shrivastava D, et al.
    Saudi Dent J, 2024 Feb;36(2):199-207.
    PMID: 38419986 DOI: 10.1016/j.sdentj.2023.10.013
    BACKGROUND: It is imperative to analyze the forces and moments produced by various auxiliaries in order to select the optimal attachments and, eventually, to maximize the efficacy and efficiency of orthodontic therapy. Through this investigation, we aimed to highlight the impact of various aligner auxiliaries on orthodontic activity in patients undergoing orthodontic treatment on a pre/post treatment protocol basis.

    METHODS: After a thorough search of the online journals, a total of 482 documents were found using keywords such as "Orthodontic Treatment", "Aligner Auxiliaries", "Elastic Ligatures" and "Tooth Movement." The database research, elimination of duplicate studies, data extraction and risk of bias were performed by the authors independently. This systematic review and network meta-analysis included prospective studies and clinical trials to evaluate research that had looked at the impact of various aligner auxiliaries on orthodontic activity in patients undergoing orthodontic treatment.

    RESULTS: Eight investigations of varying designs were selected for this review. The majority of investigations revealed that aligner auxiliaries significantly improve anterior root torque, rotation, and mesio-distal (M-D) movement, as well as posterior anchoring. They also significantly improved anterior root rotation. However, few studies have presented inconsistent or non-statistically significant findings.

    CONCLUSION: Auxiliaries for aligners also appear to improve extrusion and other orthodontic movements, but there is insufficient evidence to support these claims. No research has examined posterior bucco-lingual expansion or tilting. Clarification of the effect of attachments and their related variables requires additional clinical investigations.

  9. Biophenols from agro-industrial wastes
    Jamal P, Alam MZ, Suhani F
    Med J Malaysia, 2008 Jul;63 Suppl A:107-8.
    PMID: 19025008
    Large quantities of agro-based liquid wastes are produced every year and their disposal is often a problem for industries. In light of that, in this study prudent effort was done to screen the agro-industrial wastes - pineapple waste (PAW) and palm oil mill effluent (POME) for valuable biophenols product. Three different solvents; ethanol, acetone and distilled water were screened in order to enhance the process. All experiments were performed using fixed process conditions of solid to solvent ratio, temperatures, time and agitation speed. Effectiveness of extraction process to produce biophenol was based on high amount with more activity. POME was selected as potential source with biophenol content of 125.42 mg/L GAE.
  10. Biosorption of phenol from aqueous solution by biosolids
    Alam MZ
    Med J Malaysia, 2004 May;59 Suppl B:216-7.
    PMID: 15468895
    Studies on the removal of phenol from aqueous solutions by adsorption on sewage treatment plant biosolids (BS) as low-cost adsorbent were carried out with an aim to obtain information on treating phenol-containing wastewater from different industries. A series of experiments were undertaken in a batch adsorption technique to access the effect of the process variables i.e. initial phenol concentration, contact time, initial pH and adsorbent dose. The results showed that the adsorption capacity of BS in aqueous solution increased with the decrease in initial concentration and pH, and increase in contact time and dose of adsorbent. The experimental results were fitted by Langmuir and Freundlich isotherms to describe the biosorption processes.
  11. A virtual analysis of the precision and accuracy of 3-dimensional ear casts generated from smartphone camera images
    Farook TH, Rashid F, Jamayet NB, Abdullah JY, Dudley J, Khursheed Alam M
    J Prosthet Dent, 2022 Oct;128(4):830-836.
    PMID: 33642077 DOI: 10.1016/j.prosdent.2020.12.041
    STATEMENT OF PROBLEM: The anatomic complexity of the ear challenges conventional maxillofacial prosthetic rehabilitation. The introduction of specialized scanning hardware integrated into computer-aided design and computer-aided manufacturing (CAD-CAM) workflows has mitigated these challenges. Currently, the scanning hardware required for digital data acquisition is expensive and not readily available for prosthodontists in developing regions.

    PURPOSE: The purpose of this virtual analysis study was to compare the accuracy and precision of 3-dimensional (3D) ear models generated by scanning gypsum casts with a smartphone camera and a desktop laser scanner.

    MATERIAL AND METHODS: Six ear casts were fabricated from green dental gypsum and scanned with a laser scanner. The resultant 3D models were exported as standard tessellation language (STL) files. A stereophotogrammetry system was fabricated by using a motorized turntable and an automated microcontroller photograph capturing interface. A total of 48 images were captured from 2 angles on the arc (20 degrees and 40 degrees from the base of the turntable) with an image overlap of 15 degrees, controlled by a stepper motor. Ear 1 was placed on the turntable and captured 5 times with smartphone 1 and tested for precision. Then, ears 1 to 6 were scanned once with a laser scanner and with smartphones 1 and 2. The images were converted into 3D casts and compared for accuracy against their laser scanned counterparts for surface area, volume, interpoint mismatches, and spatial overlap. Acceptability thresholds were set at <0.5 mm for interpoint mismatches and >0.70 for spatial overlap.

    RESULTS: The test for smartphone precision in comparison with that of the laser scanner showed a difference in surface area of 774.22 ±295.27 mm2 (6.9% less area) and in volume of 4228.60 ±2276.89 mm3 (13.4% more volume). Both acceptability thresholds were also met. The test for accuracy among smartphones 1, 2, and the laser scanner showed no statistically significant differences (P>.05) in all 4 parameters among the groups while also meeting both acceptability thresholds.

    CONCLUSIONS: Smartphone cameras used to capture 48 overlapping gypsum cast ear images in a controlled environment generated 3D models parametrically similar to those produced by standard laser scanners.

  12. Fulltext Tooth Auto-transplantation: An Alternative Treatment
    Ahmed Asif J, Yusuf Noorani T, Khursheed Alam M
    Bull. Tokyo Dent. Coll., 2017;58(1):41-48.
    PMID: 28381733 DOI: 10.2209/tdcpublication.2016-0011
    Auto-transplantation is the repositioning of an autogenously erupted, partially erupted, or unerupted tooth from one site to another in the same individual. The purpose of this case report is to describe the auto-transplantation of the mandibular third molars as an alternative means of replacing second molars requiring extraction. An orthopantomogram revealed horizontal impaction of teeth #37 and 47 and mesio-angular impaction of teeth #38 and 48. Cone beam computed tomography revealed that the roots of #37 and 47 were in close proximity to the inferior alveolar canal bilaterally. As atraumatic and complete removal of these two teeth was not possible, #38 and 48 were chosen as the donor teeth instead. The procedure was carried out under general anesthesia. Teeth #38 and 48 were extracted atraumatically; teeth #37 and 47 were pulled out by sectioning and transplant sites prepared. Teeth #38 and 48 were transplanted to the sites vacated by teeth #37 and 47, respectively. Endodontic treatment of teeth #38 and 48 was completed within 1 month following transplantation. Both clinical and radiographic outcomes were considered satisfactory at 1 year postoperatively. Bone healing was observed around the roots of teeth #38 and 48. In conclusion, although auto-transplantation is not very common in general dental practice, we believe that it offers a clinically and economically viable alternative to other complicated prosthetic and dental implant treatments.
  13. Fulltext New Approach to 3D Printing of Facial Prostheses Using Combination of Open Source Software and Conventional Techniques: A Case Report
    B Jamayet N, J Abdullah Y, A Rajion Z, Husein A, K Alam M
    Bull. Tokyo Dent. Coll., 2017;58(2):117-124.
    PMID: 28724860 DOI: 10.2209/tdcpublication.2016-0021
    The wax sculpting of a maxillofacial prosthesis is challenging, time-consuming, and requires great skill. Rapid prototyping (RP) systems allow these hurdles to be overcome by enabling the creation of a customized 3D model of the desired prosthesis. Geomagic and Mimics are the most suitable software programs with which to design such prostheses. However, due to the high cost of these applications and the special training required to operate them, they are not widely used. Additionally, ill-fitting margins and other discrepancies in the final finished products of RP systems are also inevitable. Therefore, this process makes further treatment planning difficult for the maxillofacial prosthodontist. Here, we report the case of a 62-year-old woman who attended our clinic. Initially, she had presented with a right facial defect. This was later diagnosed as a squamous cell carcinoma and resected. The aim of this report is to describe a new technique for the 3D printing of facial prostheses which involves the combined use of open-source software, an RP system, and conventional methods of fabrication. The 3D design obtained was used to fabricate a maxillofacial prosthesis to restore the defect. The patient was happy with the esthetic outcome. This approach is relatively easy and cheap, does not require a high degree of non-medical training, and is beneficial in terms of clinical outcome.
  14. Postnatal treatment factors affecting craniofacial morphology of unilateral cleft lip and palate (UCLP) patients in a Japanese population
    Alam MK, Iida J, Sato Y, Kajii TS
    Br J Oral Maxillofac Surg, 2013 Dec;51(8):e205-10.
    PMID: 23099108 DOI: 10.1016/j.bjoms.2012.10.001
    We have evaluated the craniofacial morphology of Japanese patients with unilateral cleft lip and palate (UCLP) and assessed the various postnatal factors that affect it. Lateral cephalograms of 140 subjects (mean (SD) aged 7 (2) years) with UCLP were taken before orthodontic treatment. Surgeons from Hokkaido University Hospital had done the primary operations. The craniofacial morphology was assessed by angular and linear cephalometric measurements. Cheiloplasty, palatoplasty, and preoperative orthopaedic treatment were chosen as postnatal factors. To compare the assessments of the postnatal factors, we made angular and linear cephalometric measurements for each subject and converted them into Z scores in relation to the mean (SD) of the two variables. Subjects treated by the modified Millard cheiloplasty had larger sella-nasion-point A (SNA) and nasion-point A-pogonion (NA-POG) measurements than subjects treated by the modified Millard with a vomer flap cheiloplasty. Two-stage palatoplasty showed consistently better craniofacial morphology than the other palatoplasty. Subjects who had preoperative orthopaedic treatment with a Hotz plate had significantly larger upper incisor/sella-nasion (U1-SN) measurements than who had no preoperative orthopaedic treatment or an active plate. We conclude that in subjects treated by a modified Millard type of cheiloplasty, a two-stage palatoplasty, and a Hotz plate there were fewer adverse effects on craniofacial morphology.
  15. Fulltext The Genomic Blueprint of Salmonella enterica subspecies enterica serovar Typhi P-stx-12
    Ong SY, Pratap CB, Wan X, Hou S, Rahman AY, Saito JA, et al.
    Stand Genomic Sci, 2013;7(3):483-96.
    PMID: 24019994 DOI: 10.4056/sigs.3286690
    Salmonella enterica subspecies enterica serovar Typhi is a rod-shaped, Gram-negative, facultatively anaerobic bacterium. It belongs to the family Enterobacteriaceae in the class Gammaproteobacteria, and has the capability of residing in the human gallbladder by forming a biofilm and hence causing the person to become a typhoid carrier. Here we present the complete genome of Salmonella enterica subspecies enterica serotype Typhi strain P-stx-12, which was isolated from a chronic carrier in Varanasi, India. The complete genome comprises a 4,768,352 bp chromosome with a total of 98 RNA genes, 4,691 protein-coding genes and a 181,431 bp plasmid. Genome analysis revealed that the organism is closely related to Salmonella enterica serovar Typhi strain Ty2 and Salmonella enterica serovar Typhi strain CT18, although their genome structure is slightly different.
  16. Fulltext Complete genome sequence of the thermophilic Thermus sp. CCB_US3_UF1 from a hot spring in Malaysia
    Teh BS, Lau NS, Ng FL, Abdul Rahman AY, Wan X, Saito JA, et al.
    Stand Genomic Sci, 2015;10:76.
    PMID: 26457128 DOI: 10.1186/s40793-015-0053-6
    Thermus sp. strain CCB_US3_UF1 is a thermophilic bacterium of the genus Thermus, a member of the family Thermaceae. Members of the genus Thermus have been widely used as a biological model for structural biology studies and to understand the mechanism of microbial adaptation under thermal environments. Here, we present the complete genome sequence of Thermus sp. CCB_US3_UF1 isolated from a hot spring in Malaysia, which is the fifth member of the genus Thermus with a completely sequenced and publicly available genome (Genbank date of release: December 2, 2011). Thermus sp. CCB_US3_UF1 has the third largest genome within the genus. The complete genome comprises of a chromosome of 2.26 Mb and a plasmid of 19.7 kb. The genome contains 2279 protein-coding and 54 RNA genes. In addition, its genome revealed potential pathways for the synthesis of secondary metabolites (isoprenoid) and pigments (carotenoid).
  17. Fulltext Open and Lys-His Hexacoordinated Closed Structures of a Globin with Swapped Proximal and Distal Sites
    Teh AH, Saito JA, Najimudin N, Alam M
    Sci Rep, 2015;5:11407.
    PMID: 26094577 DOI: 10.1038/srep11407
    Globins are haem-binding proteins with a conserved fold made up of α-helices and can possess diverse properties. A putative globin-coupled sensor from Methylacidiphilum infernorum, HGbRL, contains an N-terminal globin domain whose open and closed structures reveal an untypical dimeric architecture. Helices E and F fuse into an elongated helix, resulting in a novel site-swapped globin fold made up of helices A-E, hence the distal site, from one subunit and helices F-H, the proximal site, from another. The open structure possesses a large cavity binding an imidazole molecule, while the closed structure forms a unique Lys-His hexacoordinated species, with the first turn of helix E unravelling to allow Lys52(E10) to bind to the haem. Ligand binding induces reorganization of loop CE, which is stabilized in the closed form, and helix E, triggering a large conformational movement in the open form. These provide a mechanical insight into how a signal may be relayed between the globin domain and the C-terminal domain of HGbRL, a Roadblock/LC7 domain. Comparison with HGbI, a closely related globin, further underlines the high degree of structural versatility that the globin fold is capable of, enabling it to perform a diversity of functions.
  18. Fulltext Burden of stroke in the Kingdom of Saudi Arabia: A soaring epidemic
    Basri R, Issrani R, Hua Gan S, Prabhu N, Khursheed Alam M
    Saudi Pharm J, 2021 Mar;29(3):264-268.
    PMID: 33981175 DOI: 10.1016/j.jsps.2021.02.002
    Stroke is a key cerebrovascular disease that is related to high morbidity and mortality in the globe. The Kingdom of Saudi Arabia (KSA) is not an exception where stroke is fast developing into a serious challenge due to the high mortality rate. Additionally, stroke presents a tremendous economic burden and has a devastating effect on the quality of lives of individuals. The number of stroke cases are increasing yearly, thus posing a major challenge to the health care system. Therefore, it is crucial to implement primary and secondary prevention strategies in the KSA. Nevertheless, as compared with developed countries, information on the prevalence, socio-demographic properties and prevention of stroke remains scarce that could be attributed to the shortage of research conducted in this specified region. The review is written to address the various aspects of stroke in the KSA, based on current literatures search using PubMed, Scopus, Web of Science and Google Scholar databases, to identify studies published since inception to Dec 2020.
  19. Fulltext ZnCl2 catalyzed new coumarinyl-chalcones as cytotoxic agents
    Sathish Kumar K, Kotra V, Phani Kumar Kola, Praveena Devi CB, Anusha N, Hari Babu B, et al.
    Saudi J Biol Sci, 2021 Jan;28(1):386-394.
    PMID: 33424321 DOI: 10.1016/j.sjbs.2020.10.020
    A new series of coumarin-yl-chalcone derivatives (3a-m) had been designed and synthesized through different reactions such as aromatic addition, cyclization and Claisen-Schmidt reactions in good yields (54-78%). 5-acetyl-4-(2-hydroxyphenyl) -6-methyl-3, 4-dihydropyrimidin-2(1H) -one (1) has been synthesized by multi-component one pot reaction of salicylaldehyde, methyl acetoacetate and urea, which was further reacted with malonic acid employing ZnCl2 catalyst to yield 5-acetyl-4-(4-hydroxy-2-oxo-2H-chromen-8-yl) -6-methyl-3, 4-dihydropyrimidin-2(1H) -one (2). The title compounds (3a-m) were synthesised by reacting 5-acetyl-4-(4-hydroxy-2-oxo-2H-chromen-8-yl) -6-methyl-3, 4-dihydropyrimidin-2(1H)-one (2) with different aromatic aldehydes in the presence of potassium hydroxide. In silico studies, a preliminary screening method for predicting the anti-cancer activity was performed for the synthesized compounds (3a-m) against Src, Alb tyrosine kinase and homology model protein (PDB ID: 4csv). The derivatives 3h and 3m showed moderate binding energies. The in vitro cytotoxic activity was evaluated for the compounds 3h and 3m by using human cancer cell-line morphology and MTT assay against three human cell-lines A549 (Lung), Jurkat (Leukemia) and MCF-7 (Breast). The results indicate that the derivatives 3h and 3m display significant anti-cancer activity, however it was found to be less cytotoxic when compared to the standard used i.e. Imatinib.
  20. Fulltext Perovskite materials in X-ray detection and imaging: recent progress, challenges, and future prospects
    Miah MH, Khandaker MU, Aminul Islam M, Nur-E-Alam M, Osman H, Ullah MH
    RSC Adv, 2024 Feb 21;14(10):6656-6698.
    PMID: 38390503 DOI: 10.1039/d4ra00433g
    Perovskite materials have attracted significant attention as innovative and efficient X-ray detectors owing to their unique properties compared to traditional X-ray detectors. Herein, chronologically, we present an in-depth analysis of X-ray detection technologies employing organic-inorganic hybrids (OIHs), all-inorganic and lead-free perovskite material-based single crystals (SCs), thin/thick films and wafers. Particularly, this review systematically scrutinizes the advancement of the diverse synthesis methods, structural modifications, and device architectures exploited to enhance the radiation sensing performance. In addition, a critical analysis of the crucial factors affecting the performance of the devices is also provided. Our findings revealed that the improvement from single crystallization techniques dominated the film and wafer growth techniques. The probable reason for this is that SC-based devices display a lower trap density, higher resistivity, large carrier mobility and lifetime compared to film- and wafer-based devices. Ultimately, devices with SCs showed outstanding sensitivity and the lowest detectable dose rate (LDDR). These results are superior to some traditional X-ray detectors such as amorphous selenium and CZT. In addition, the limited performance of film-based devices is attributed to the defect formation in the bulk film, surfaces, and grain boundaries. However, wafer-based devices showed the worst performance because of the formation of voids, which impede the movement of charge carriers. We also observed that by performing structural modification, various research groups achieved high-performance devices together with stability. Finally, by fusing the findings from diverse research works, we provide a valuable resource for researchers in the field of X-ray detection, imaging and materials science. Ultimately, this review will serve as a roadmap for directing the difficulties associated with perovskite materials in X-ray detection and imaging, proposing insights into the recent status, challenges, and promising directions for future research.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links