The feasibility of using a computer database management system based on an 8·bit microcomputer for storing, retrieving and analysing patient data in a limited setting (oesophago·gastro-duodenoscopy records from a peripheral general surgical department over a 1 year period) is presented. A program developed by the author was used to enter the relevant records of 208 patients undergoing the above examination, and to retrieve and analyse any desired data. Compatible statistical and graphics software packages can be used to access and analyse the data and display or print out the results. The limitations and scope for further expansion of the system are discussed.
The third and final meeting of a coordinated research programme on the diagnosis and management of thyroid disorders was held in Vienna from 15 to 17 December 1986. The participants were from Czechoslovakia, Egypt, Israel, Malaysia and Thailand. Each participant had studied between 500 and 1000 patients for thyroid function evaluation by performing T3, T4 and TSH radioimmunoassays. Each had also used the newly available supersensitive immunoradiometric (IRMA) assay in a group of patients to compare the efficiency of the new assay with that of the conventional assay. A microcomputer was provided to each participant for data analysis. Internal quality control was studied by establishing precision profiles and external quality control was on the basis of pooled standard sera in different ranges. Recommendation for the strategy suggested T4 RIA as the test of first choice in each category of thyroid function. IRMA TSH was suggested as a second test in borderline cases.
The emphasis on cow records in Malaysian dairy extension programmes reflects the importance of herd fertility in the economics of dairying. Manual record keeping has not been able to make an impact on management due to difficulties experienced in quality control of the data and in analysing the data to produce useful information for farm managers. Computerised recording systems have been in use in Malaysia since 1985, both on government farms and in the small-holder dairy sector. The aim of both systems is firstly to improve farm efficiency by the provision of information to managers and extension workers and secondly to provide information for departmental planning purposes. The systems used in Malaysia are outlined, and the results over the first three years of operation are summarised.
We describe the design and management of a 35 mm slide database using a menu-driven dBASE III PLUS programme and a microcomputer in a large department of pathology that also caters for the individual pathologist. Existing systems described in the literature are geared towards slides of general medicine and do not address the needs of the individual pathologist. A total of 11,481 slides in the Department of Pathology, Faculty of Medicine, University of Malaya, were filed into a single database with each record representing one slide. Nine fields which comprised the slide accession number, reference number, slide category, SNOMED codes, and a description of the slide in natural language, seemed adequate for slide definition. The menu-driven programme had functions which included the abilities to add, delete, edit and back-up records, and to search for desired slides. Although slides may be searched for in various fields, we found that searches using natural language alone were both comprehensive and efficient, provided a standard format of description was adhered to and data entries scrutinized carefully for errors. We believe therefore, that for the pathologist working alone, coded language fields are not absolutely necessary, as manual coding and additional data entry can be time consuming. As expected, for databases larger than 10,000 slides, a 80286 microprocessor-based microcomputer was more efficient. We are of the opinion that a system such as ours is very useful for a large department of pathology or the individual pathologist to file and retrieve 35 mm slides.
A system for computerising full blood picture reporting developed in-house using dBASE IV on IBM-compatible microcomputers in a local area network environment is described. The software package has a user-friendly interface which consists of a horizontal main menu bar with associated pull-down submenus. The package captures data directly from an automatic blood cell counter and provides options to modify or delete records, search for records, print interim, final or cumulative reports, record differential counts with an emulator, facilitate house-keeping activities which include backing-up databases and repairing corrupted indices. The implementation of this system has helped to improve the efficiency of reporting full blood picture in the haematology laboratory.
A study on 30 asthmatic children was conducted in Kuala Lumpur. The objective of this study was to study the relationship between respirable particulate (PM10), sulphur dioxide, ozone and various meteorological factors such as humidity, level ofrainfall and temperature with asthma attacks. This study was conducted from 1st September to 31 December 1994. Patients were selected from the Paediatric Unit, Kuala Lumpur Hospital. Questionnaires were used to obtain information from their parents on the history and severity ofasthmatic attacks ofthese patients. Questionnaires were also used to determine if the indoor sources contributed to the attack. Diary cards were used to collect information on the frequency of asthmatic attacks. Each patient's progress was followed through every week during the study period and the attacks were recorded. The data on air quality on the PM10, sulphur dioxide, nitrogen dioxide, carbon monoxide and ozone were collected hourly using the microcomputer system of air monitoring unit from the Universiti Pertanian Malaysia air quality monitoring station located at the City Hall, Kuala Lumpur. The meteorological parameters such as temperature, relative humidity and rain-fall levels were also monitored daily. The asthmatic attack percentage was obtained by dividing the number of attacks in a day with the total number of sample and multiplying by a hundred. Statistical tests indicated that there was a significant correlation between asthmatic attacks and the PM10 concentrations (r=0.73), nitrogen dioxide (r=0.57) and.carbon monoxide (r=0.53) throughout the study period. During the haze episode, more significant correlations between asthmatic attacks, PM10 concentra-tions (0.86), carbon monoxide (0.79) and nitrogen oxide (0.53) were found. Multiple regression statistical test showed that PM10 had the greatest influence on the asthmatic attack rate. The minute respirable particulate which entered the respiratory system of the asthmatics triggered attacks on these patients.
This procedure is easy to use and is cost-effective because it uses equipment that exist in any office or institution. The material used, transparency film for use with plain paper copier, is less expensive than either photographic slide film or normal slide films. Moreover, the transparency sheet can be used again for photocopying until the sheet is fully used up. There is no added cost of development of film, or is it necessary to wait for the whole roll of film to be used before the label can be retrieved and used. The background of the label is clear and only the black images of the characters of the label can be clearly seen. The effect of the transparency film, photocopy ink, and adhesive glue is not known. But no adverse effects have been noted. Microlabels have advantages over conventional labels with characters in font size 8 to 12, because more information, such as the full name of the patient, sex, country of origin, and national identification number can be incorporated. With more detailed information, quick identification of a deceased person can be made. Microlabels with a clear background will have minimal esthetic impact on the patient. The disadvantages of the technique is that it may not withstand a fire. In situations where the deceased body is badly burned, the denture and its identification strip may be burned, too. However, this risk can be minimized by placing the strip in the most posterior part of the denture-palatal in the maxillary denture and distal lingual in the mandibular denture. For testing of durability, dentures with the labels were placed in water for up to 4 months. The labels showed no sign of fading or deterioration.
A cross-sectional study of medical students using a self-administered questionnaire was carried out in the Faculty of Medicine, University of Malaya, Malaysia from December 2000 to January 2001 to determine IT usage, perceptions and literacy of medical students. 366 of 653 (56.0%) students reported owning some type of personal computer. Students mainly used the computer to get onto the Internet, do word-processing and make presentations. Junior (Year One and Two) students and those who had used computers before entering university were more likely to use the Internet. Those who own computers were more likely to feel comfortable with software (OR 1.61, 95% CI: 1.09, 2.38). Students who use the Internet were more likely to perceive that IT facilitated their studies (OR 4.61, 95% CI: 2.35, 9.05). The highest self-reported IT skill was e-mailing followed by surfing the World Wide Web and word-processing. Male students and junior students had significantly higher self-reported IT literacy scores compared to female students and senior students. Significant predictors for an IT identifier score after adjusting for other variables were self-reported rating of computer knowledge, number of siblings, parents' income and gender.
An ergonomics improvement study was conducted on the visual inspection process of a printed circuit assembly (PCA) factory. The process was studied through subjective assessment and direct observation. Three problems were identified: operators' eye problems, insufficient time for inspection and ineffective visual inspection. These problems caused a huge yearly rejection cost of US 298,240 dollars, poor quality, customer dissatisfaction and poor occupational health and safety. Ergonomics interventions were made to rectify the problems: reduced usage of a magnifying glass, the use of less glaring inspection templates, inspection of only electrically non-tested components and introduction of a visual inspection sequence. The interventions produced savings in rejection cost, reduced operators' eye strain, headaches and watery eyes, lowered the defect percentage at customers' sites and increased the factory's productivity and customer satisfaction.
The last 20 years have seen a tremendous growth in mobile computing and wireless communications and services. An experimental study was conducted to explore the effect of text/background color on a laptop computing system along with variable environmental vibration on operators' data entry task performance in moving automobiles. The operators' performance was measured in terms of the number of characters entered per minute without spaces (NCEPMWS) on a laptop computing system. The subjects were divided into 3 categories, namely, Novices, Intermediates and Experts. Findings suggest a re-evaluation of existing laptop designs taking ergonomics into consideration. It appears that proper selection of text/background color on the laptop coupled with controlled vehicular speed could result in a better quality of interaction between human and laptops and it could also resolve the problem of poor data entry task performance.
The low resolution Automatic Picture Transmission (APT) data from the National Oceanic and Atmospheric Administration (NOAA) polar-orbiting satellites Advanced Very High Resolution Radiometer (AVHRR) is being received and recorded in real-time mode at ground receiving station in School of Science and Technology, Universiti Malaysia Sabah. The system is suitable for the developing and undeveloped countries in south and Southeast Asia and is said to be acceptable for engineering, agricultural, climatological and environmental applications. The system comprises a personal computer attached with a small APT receiver. The data transmission between the ground receiving station and NOAA satellites is using the electromagnetic wave. The relation for receiving and processing the electromagnetic wave in the transmission will be discussed.
The use of a personal computer together with a Data Acquisition System (DAQ) as the processing tool in optical tomography systems has been the norm ever since the beginning of process tomography. However, advancements in silicon fabrication technology allow nowadays the fabrication of powerful Digital Signal Processors (DSP) at a reasonable cost. This allows this technology to be used in an optical tomography system since data acquisition and processing can be performed within the DSP. Thus, the dependency on a personal computer and a DAQ to sample and process the external signals can be reduced or even eliminated. The DSP system was customized to control the data acquisition process of 16x16 optical sensor array, arranged in parallel beam projection. The data collected was used to reconstruct the cross sectional image of the pipeline conveyor. For image display purposes, the reconstructed image was sent to a personal computer via serial communication. This allows the use of a laptop to display the tomogram image besides performing any other offline analysis.
The last 20 years have seen a tremendous growth in the field of computing with special reference to mobile computing. Ergonomic issues pertaining to this theme remains unexplored. With special reference to readability in mobile computing, an experimental research was conducted to study the gender effect on human performance under the impact of vibration in a human computer interaction environment. Fourteen subjects (7 males and 7 females) participated in the study. Three independent variables, namely gender, level of vibration and screen text/background colour, were selected for the experimental investigation while the dependent variable was the number of characters read per minute. The data collected were analyzed statistically through an experimental design for repeated measures. Results indicated that gender as an organismic variable, the level of vibration and screen text/background colour revealed statistically significant differences. However, the second order interaction was found to be statistically non-significant. These findings are discussed in light of the previous studies undertaken on the topic.
In the past, simulating charge dynamics in solid state devices, such as current mobility, transient current drift velocities are done on mainframe systems or on high performance computing facilities. This is due to the fact that, such simulations are costly in terms of computational requirements when implemented on a single processor-based personal computers (PCs). When simulating charge dynamics, large ensembles of particles are usually preferred, such as exceeding 40000 particles, to ensure a numerically sound result. When implementing this type of simulation on a single processor PCs using the conventional ensemble or single particle Monte Carlo method, the computational time is very long even on the fast 2.0 MHz PCs. Lately, a more efficient, easily made available tools and cost effective solution to this problem is the application of an array of PCs employed in a parallel application. This is done using a computer cluster network in a master-slave model. In this paper we report the development of a LINUX cluster for the purpose of implementing parallel ensemble Monte Carlo modelling for solid states device. We have proposed the use of Parallel Virtual Machine (PVM) standards when running the parallel algorithm of the ensemble MC simulation. Some results of the development are also presented in this paper.
Increasing numbers of workers use computer for work. So, especially among office workers, there is a high risk of musculoskeletal discomforts. This study examined the associations among 3 factors, psychosocial work factors, work stress and musculoskeletal discomforts. These associations were examined via a questionnaire survey on 30 office workers (at a university in Malaysia), whose jobs required an extensive use of computers. The questionnaire was distributed and collected daily for 20 days. While the results indicated a significant relationship among psychosocial work factors, work stress and musculoskeletal discomfort, 3 psychosocial work factors were found to be more important than others in both work stress and musculoskeletal discomfort: job demands, negative social interaction and computer-related problems. To further develop study design, it is necessary to investigate industrial and other workers who have experienced musculoskeletal discomforts and work stress.
Personal computer (PC) based user interface for equipment control and data acquisition from the nuclear counting system to count nuclear radiation energy from radioactive sources have been developed at Malaysian Nuclear Agency. Effort is made to ensure a good reliability of the system for nuclear counting, especially neutrons particles and gamma rays. It will be used in laboratory for testing and maintenance of nuclear spectrometry instruments. Personal computer is used to control the operation of equipment and data acquisition from counter/timer module. Control and data communication between PC and the Counter/ Timer is made through the USB' to RS 232 converter terminal. The program for this system was written using Labview 8.6 software on Windows XP environment. This system has been successfully tested using a pulse generator to simulate the detector signal for calibration and then followed by actual measurement using HE-3 detector.
Purpose of the study: The objective of this study was to investigate the existence of the golden proportion between the width of the maxillary anterior teeth of undergraduate dental students at University of Malaya. Materials and method: Standardised photographs of 100 dental students’ smiles displaying only the lips and the teeth were captured. The images were transferred to a personal computer and the width of the maxillary anterior teeth was measured using an Image
Analyzer (Leiqa QWin). Calculations were made according to the Theory of Golden Proportion. The
data were statistically analysed using paired student T-test (α