MyMedR

Displaying publications 1 - 20 of 59 in total

Abstract:

Sort:

Workplace injuries and risk reduction practices in Malaysia

Ali R, Shaharudin R, Omar A, Yusoff F

Int J Occup Environ Health, 2012 Oct-Dec;18(4):299-306.
PMID: 23433290 DOI: 10.1179/1077352512Z.00000000031

INTRODUCTION: This study on workplace injuries and risk reduction practices was part of the Malaysia National Health Morbidity Survey III (NHMS III) conducted in 2006.
METHODS: This cross-sectional population-based survey was conducted to determine the incidence of workplaces injuries and assess the magnitude of some important risk reduction practices among workers. Data were gathered through face-to-face household interviews using a pre-coded questionnaire.
RESULTS: Of the 22 880 eligible respondents, 88·2% (20 180) responded. The incidence rate for injuries at the workplace was 4·9 per 100 (95% CI: 4·6-5·2). The overall proportion of workers who had received occupational safety and health (OSH) training before or within 1 month of starting work was 33·6%. Among respondents who perceived that personal protective equipment (PPE) was required at their workplace, only 38·9% (95% CI: 37·8-39·4) were provided with it by their employers.
DISCUSSION: Further studies are urgently needed to identify reasons for and management of the low uptake of risk reduction practices. This issue needs to be addressed to ensure the safety and health of our working population.
Study name: National Health and Morbidity Survey (NHMS-2006)

Matched MeSH terms: Safety Management/methods; Safety Management/organization & administration*
Toxic release consequence analysis tool (TORCAT) for inherently safer design plant

Shariff AM, Zaini D

J Hazard Mater, 2010 Oct 15;182(1-3):394-402.
PMID: 20633985 DOI: 10.1016/j.jhazmat.2010.06.046

Many major accidents due to toxic release in the past have caused many fatalities such as the tragedy of MIC release in Bhopal, India (1984). One of the approaches is to use inherently safer design technique that utilizes inherent safety principle to eliminate or minimize accidents rather than to control the hazard. This technique is best implemented in preliminary design stage where the consequence of toxic release can be evaluated and necessary design improvements can be implemented to eliminate or minimize the accidents to as low as reasonably practicable (ALARP) without resorting to costly protective system. However, currently there is no commercial tool available that has such capability. This paper reports on the preliminary findings on the development of a prototype tool for consequence analysis and design improvement via inherent safety principle by utilizing an integrated process design simulator with toxic release consequence analysis model. The consequence analysis based on the worst-case scenarios during process flowsheeting stage were conducted as case studies. The preliminary finding shows that toxic release consequences analysis tool (TORCAT) has capability to eliminate or minimize the potential toxic release accidents by adopting the inherent safety principle early in preliminary design stage.

Matched MeSH terms: Safety Management*
The influence of hazard control and prevention toward safety behaviors and safety outcomes in coal-fired power plants using PLS-SEM

Arifin K, Ali MXM, Abas A, Ahmad MA, Ahamad MA, Sahimi AS

J Safety Res, 2023 Sep;86:376-389.
PMID: 37718065 DOI: 10.1016/j.jsr.2023.07.017

INTRODUCTION: The electrical utility industry, which plays a vital role in sustaining other sectors, contributes to high occupational accident rates in the utility industries. The high accident rate shows that there has been insufficient effort made to control unsafe actions and conditions in the workplace. This study aims to examine the influence of hazard control and prevention as leading indicators of safety behaviors and outcomes in coal-fired power plants in Malaysia.
METHODS: This quantitative research was conducted by distributing survey questionnaires randomly to five coal-fired power plants in Peninsular Malaysia. A total of 340 respondents were involved in this research. Partial least squares structural equation modeling (PLS-SEM) analysis was performed using SmartPLS to validate and examine the relationship of the proposed model.
RESULTS: The results validate the construct of hazard control and prevention consisting of planning, action, managing, and verifying, while the safety outcomes construct consists of occupational accidents, fatal accidents, near misses, and lost time injuries. The results indicate that hazard control and prevention significantly relate to safety compliance, safety participation, safety motivation, and safety knowledge. Moreover, safety outcomes were influenced negatively by hazard control and prevention through safety compliance.
CONCLUSION: The model provides a better understanding of the influence of hazard control and prevention on safety behavior and outcomes.
PRACTICAL APPLICATIONS: The model can be used as guidance for practitioners and researchers in planning and implementing hazard control and prevention to improve health and safety in the workplace.

Matched MeSH terms: Safety Management*
The effects of perceived organizational support, perceived supervisor support and perceived co-worker support on safety and health compliance

Puah LN, Ong LD, Chong WY

Int J Occup Saf Ergon, 2016 Sep;22(3):333-9.
PMID: 27049935 DOI: 10.1080/10803548.2016.1159390

Although knowledge is cumulating, very little is known about the effects of various sources of support on safety and health compliance. This study goes beyond previous research by investigating the relationships among perceived support from organizations, supervisors and co-workers, and employees' safety and health compliance behaviour at chemical and petroleum process plants. The results of this study show that the support from organizations, supervisors and co-workers was significantly related to employees' safety and health compliance. Also, the findings reveal that perceived supervisor support has the strongest influence in ensuring employees' safety and health compliance behaviour.

Matched MeSH terms: Safety Management/organization & administration*
Fulltext The adoption of 5S practice and its impact on safety management performance: a case study in a university environment

Rhaffor, Kauthar A., Nurul Hafieza Azizul, Rahim Jamian, Jum’azulhisham Abdul Shukor

Journal of Occupational Safety and Health, 2019;16(1):9-17.
MyJurnal

he practice of 5S has been adopted by many organizations as a method to organize the workplace towards reducing waste and improving productivity. Moreover, the practice also promotes a safe and efficient environment in organisations. As safety performance of the workplace is among the key issues in most industries including universities to become world class organizations, this study seeks to address empirically the impact of 5S practice on safety management performance. In this context, a survey questionnaire is employed and distributed to 60 employees of the selected university to examine the employees’ perception on the adoption of 5S practice as well as the impact of 5S practice towards safety management performance. The questionnaires were validated by a pilot test with an acceptable value of Cronbach's alpha. Overall findings highlight there was positive perceptions toward 5S practice among the respondents. The results also revealed that 5S Audit has a very strong positive correlation with safety management performance. Furthermore, 5S Training and Top Management Commitment were (2) factors that strongly correlated to safety management performance. These factors are highly important in contributing toward the success of safety management performance. Additionally, since most of the employees were not exposed with Occupational Safety and Health (OSH), this study reveals moderate negative correlation between compliance to OSH Requirements and safety management performance.

Matched MeSH terms: Safety Management
Fulltext Tahap pengetahuan keselamatan dan kesihatan pekerjaan di kalangan pekerja di makmal perubatan di Lembah Klang

Anuar, I., Zahedi, F., Kadir, A., Mokhtar, A.B.

Malaysian Journal of Community Health, 2009;15(2):35-42.
MyJurnal

Background : A safety culture practice through prevention needs skillful, knowledgeable and competencies workers. The effectiveness of occupational safety and health programme implementation needs the knowledge related to Occupational Safety and Health Acts, 1994 (OSHA 1994) and its regulations.
Objective : This study was to determine the level of knowledge and awareness towards Occupational Safety and Health (OSH) aspects among workers in medical laboratory.
Methodology : A cross-sectional study was carried out on 34 medical laboratories in which 17 were from private and another 17 laboratories were from public sectors. It consists of 112 medical laboratory disciplines. Data were obtained using self-administered questionnaire consisting of 33 questions related to Occupational Safety and Health (OSH). Each question was coded “know” and “do not know” and respondents were needed to state their understanding towards each OSH issue tendered.
Results : Respondent’s level of knowledge was analyzed according to socio-demography and socioeconomic factors. OSH level of knowledge among medical laboratory workers showed that there are significant differences (p0.05) in OSH knowledge according to between sex, marital status, income and services sectors among workers in medical laboratories. Only about 60.5% of respondents knew the existence of OSHA 1994, whereas those who knew about OSHA 1994 regulations were below than 50.0% from overall respondents.
Conclusion : Promotion and practices of dynamic safety culture through prevention needs high knowledge of OSH.

Matched MeSH terms: Safety Management
Should known allergy status be included as a medication administration 'right'?

Mortell M

Br J Nurs, 2019 Nov 14;28(20):1292-1298.
PMID: 31714835 DOI: 10.12968/bjon.2019.28.20.1292

This article employs a paediatric case study, involving a 3-year-old child who had an anaphylactic reaction that occurred as a result of the multidisciplinary team's failure to identify and acknowledge the patient's documented 'known allergy' status. It examines and reconsiders the ongoing healthcare dilemma of medication errors and recommends that known allergy status should be considered the second medication administration 'right' before the prescribing, transcribing, dispensing and administration of any drug. Identifying and documenting drug allergy status is particularly important when caring for paediatric patients, because they cannot speak for themselves and must rely on their parents, guardians or health professionals as patient advocates. The literature states that medication errors can be prevented by employing a 'rights of medication administration' format, whether that be the familiar '5 rights' or a more detailed list. However, none of these formats specify known allergy status as a distinct 'right'. The medication safety literature is also found wanting in respect of the known allergy status of the patient. When health professionals employ a medication administration rights format prior to prescribing, transcribing, dispensing or administering a medication, the 'known allergy status' of the patient should be a transparent inclusion.

Matched MeSH terms: Safety Management/methods*
Shift schedule realignment and patient safety culture

Wijaya MI, Mohamad AR, Hafizurrachman M

Int J Health Care Qual Assur, 2020 Jan 15;ahead-of-print(ahead-of-print).
PMID: 32012498 DOI: 10.1108/IJHCQA-04-2019-0080

PURPOSE: The purpose of this paper is to assess the association between shift schedule realignment and patient safety culture.
DESIGN/METHODOLOGY/APPROACH: Using difference in differences model, BIMC Hospitals and Siloam Hospital Bali were compared before and after shift schedule realignment to test the association between shift schedule realignment and patient safety culture.
FINDINGS: Shift schedule realignment was associated with a significant improvement in staffing (coefficient 1.272; 95% CI 0.842 - 1.702; p<0.001), teamwork within units (coefficient 1.689; 95% CI 1.206 - 2.171; p<0.001), teamwork across units (coefficient 1.862; 95% CI 1.415 - 2.308; p<0.001), handoffs and transitions (coefficient 0.999; 95% CI 0.616 - 1.382; p<0.001), frequency of error reported (coefficient 1.037; 95% CI 0.581 - 1.493; p<0.001), feedback and communication about error (coefficient 1.412; 95% CI 0.982 - 1.841; p<0.001) and communication openness (coefficient 1.393; 95% CI 0.968 - 1.818; p<0.001).
PRACTICAL IMPLICATIONS: With positive impact on patient safety culture, shift schedule realignment should be considered as quality improvement initiative. It stretches the compressed workload suffered by staff while maintaining 40 h per week in accordance with applicable laws and regulations.
ORIGINALITY/VALUE: Shift schedule realignment, designed to improve patient safety culture, has never been implemented in any Indonesian private hospital. Other hospital managers might also appreciate knowing about the shift schedule realignment to improve the patient safety culture.

Matched MeSH terms: Safety Management/standards*
Safety management practices and safety behaviour: a preliminary investigation in Malaysian Small and Medium Enterprises in Northern Corridor Economic Region (NCER)

Khoo Teng Hong, Lilis Surienty, Daisy Kee Mui Hung

Journal of Occupational Safety and Health, 2011;8(1):0-0.
MyJurnal

The paper reports on a study conducted in Small and Medium Enterprises (SMEs) in NCER, Malaysia. Four safety management practices were studied in relation to safety behaviour of employees. Respondents consisted of employees working in SMEs in NCER. Companies were sampled randomly from directories provided by SMECorp and other SME-related body. Self-administered questionnaires were sent by mail to employees working in SMEs. Completed questionnaires were mailed back by respondents using pre-addressed and post-paid envelope included. Correlation analysis were conducted and found that all four safety management practices are highly correlated with safety behaviour. The result provides support to the use of safety management practices to improve safety behaviour of employees and overall safety of the workplace. Suggestions for management in SMEs are presented in the discussion section. Management in SMEs can consider the use of safety management practices as antecedents that trigger safety behaviour of their employees in order to reduce accident rate in workplace.

Matched MeSH terms: Safety Management
Fulltext Safety culture perceptions of pharmacists in Malaysian hospitals and health clinics: a multicentre assessment using the Safety Attitudes Questionnaire

Samsuri SE, Lua PL, Fahrni ML

BMJ Open, 2015 Nov 26;5(11):e008889.
PMID: 26610761 DOI: 10.1136/bmjopen-2015-008889

OBJECTIVE: To assess the safety attitudes of pharmacists, provide a profile of their domains of safety attitude and correlate their attitudes with self-reported rates of medication errors.
DESIGN: A cross-sectional study utilising the Safety Attitudes Questionnaire (SAQ).
SETTING: 3 public hospitals and 27 health clinics.
PARTICIPANTS: 117 pharmacists.
MAIN OUTCOME MEASURES: Safety culture mean scores, variation in scores across working units and between hospitals versus health clinics, predictors of safety culture, and medication errors and their correlation.
RESULTS: Response rate was 83.6% (117 valid questionnaires returned). Stress recognition (73.0±20.4) and working condition (54.8±17.4) received the highest and lowest mean scores, respectively. Pharmacists exhibited positive attitudes towards: stress recognition (58.1%), job satisfaction (46.2%), teamwork climate (38.5%), safety climate (33.3%), perception of management (29.9%) and working condition (15.4%). With the exception of stress recognition, those who worked in health clinics scored higher than those in hospitals (p<0.05) and higher scores (overall score as well as score for each domain except for stress recognition) correlated negatively with reported number of medication errors. Conversely, those working in hospital (versus health clinic) were 8.9 times more likely (p<0.01) to report a medication error (OR 8.9, CI 3.08 to 25.7). As stress recognition increased, the number of medication errors reported increased (p=0.023). Years of work experience (p=0.017) influenced the number of medication errors reported. For every additional year of work experience, pharmacists were 0.87 times less likely to report a medication error (OR 0.87, CI 0.78 to 0.98).
CONCLUSIONS: A minority (20.5%) of the pharmacists working in hospitals and health clinics was in agreement with the overall SAQ questions and scales. Pharmacists in outpatient and ambulatory units and those in health clinics had better perceptions of safety culture. As perceptions improved, the number of medication errors reported decreased. Group-specific interventions that target specific domains are necessary to improve the safety culture.
Study site: Klinik kesihatan, hospitals, Malaysia

Matched MeSH terms: Safety Management/standards*
Safety Intervention Need Analysis System for construction industry

Asmalia Che Ahmad, Normazlina Mohamed Zi, Ismail Bahari, Azizah Jaafar

Journal of Occupational Safety and Health, 2012;9(2):39-46.
MyJurnal

Safety Intervention Need Analysis System (SINAS) is a web-based safety management program that aspires the identification for the need of construction safety intervention. It can be accessed through the website www.sinas.org. This first phase of SINAS project development only focus on safe design intervention. SINAS was created to provide assistance for safety practitioners in identifying the need of safe design intervention. This was put forward through the investigations of construction accidents that relate to design. The SINAS process of need analysis are carved up to six steps i.e. user information, accident details, accident evaluation, result of the need analysis, construction design intervention and safety intervention need analysis report. At the end of the process, Safety Intervention Need Analysis Report will be generated. This report is an essential document to proof the need of safe design intervention. Additionally, SINAS also offers recommendations for construction designers and professionals on suitable safe design intervention to prevent construction accidents and minimises construction risks.

Matched MeSH terms: Safety Management
Fulltext Review of knowledge, attitude, and practice among laboratory workers towards occupational safety and health

Nayef Shabbab Almutairi, Shamsul Bahri Bin Md Tamrin, Ng Yee Guan, Vivien How

Malaysian Journal of Medicine and Health Sciences, 2020;16(1):297-303.
MyJurnal

Laboratory workers exposed to diverse occupational exposures to accidents. Evidently, extant, yet very limited em- pirical underpinnings suggest that knowledge, practices and awareness of safety precautions are uncharacteristically poor among laboratory workers. As such, their demonstration of safety-related attitudes and practices have remained questionable. This paper, thus presents a systematic search of the literature on laboratory workers’ safety-related knowledge, attitudes, and practices. Specifically, literature published between 2007 and 2017 that characteristically attempted to evaluate knowledge, attitudes and practices among laboratory workers on Occupational Safety and Health were reviewed. Evidently, results from the review indicate poor knowledge, attitude and practice among the laboratory workers. It is critical that strategies be put in place by the management of the health facilities to institute and undertake activities in the form of training, improved safety management practices, organizational commitment and improved safety culture.

Matched MeSH terms: Safety Management
Fulltext Quisy-SDS accelerates the searching process of chemical safety datasheet

Muhammad Firdaus Othman,, Nor Aimi Abdul Wahab, Suhaiza Hasan, Marina Mokhtar, Noorezal Atfyinna Mohd Napiah, Mohd Noor Mokhtar, et al.

Jurnal Inovasi Malaysia, 2019;2(2):123-139.
MyJurnal

Teaching, learning and reseach activities in chemical laboratory usually involves a variety of hazardous chemicals. All chemicals stored in the laboratories should be accompanied by a safety data sheet which contains information such as chemical composition, safety precautions for handling and storing chemicals and emergency measures in case of accident. Ineffective management of chemical safety data sheet makes it difficult to access and resulting in slow action taken in the event of accident. To overcome this problem, Quisy-SDS was introduced to ensure a more effective chemical safety information management. Quisy-SDS provides a convenient method for all lab users and emergency respondents to acess the chemical safety information. This method uses a Quick Response (QR) code and website that allow users to acess the information in no time, anytime and anywhere. The use of Quisy-SDS has successfully reduced the search time of chemical safety information by 98% compared to the previous method.

Matched MeSH terms: Safety Management
Psychometric properties of the Indonesian version of the nursing home survey on patient safety culture

Fauziningtyas R, Chan CM, Pin TM, Dhamanti I, Smith GD

Int J Older People Nurs, 2023 Sep;18(5):e12553.
PMID: 37334471 DOI: 10.1111/opn.12553

INTRODUCTION: The development of resident safety culture in nursing homes (NH) represents a major challenge for governments and NH owners, with a requirement for suitable tools to assess safety culture. Indonesia currently lacks suitable safety cultures scales for NH.
OBJECTIVES: To evaluate the psychometric properties of the translated Indonesian version of the Nursing Home Survey on Patient Safety Culture (NHSOPSC-INA).
METHODS: This study was a cross-sectional survey conducted using NHSOPSC-INA. A total of 258 participants from 20 NH in Indonesia were engaged. Participants included NH managers, caregivers, administrative staff, nurses and support staff with at least junior high school education. The SPSS 23.0 was used for descriptive data analysis and internal consistency (Cronbach's alpha) estimation. The AMOS (version 22) was used to perform confirmatory factor analysis (CFA) on the questionnaire's dimensional structure.
RESULTS: The NHSOPSC CFA test originally had 12 dimensions with 42 items and was modified to eight dimensions with 26 items in the Indonesian version. The deleted dimensions were 'Staffing' (4 items), 'Compliance with procedure' (3 items), 'Training and skills' (3 items), 'non-punitive response to mistakes' (4 items) and 'Organisational learning' (2 items). The subsequent analysis revealed an accepted model with 26 NHSOPSC-INA items (root mean square error of approximation = 0.091, comparative fit index = 0.815, Tucker-Lewis index = 0.793, CMIN = 798.488, df = 291, CMIN/Df = 2.74, GFI = 0.782, AGFI = 0.737, p

Matched MeSH terms: Safety Management
Protecting the health of medical students on international electives in low-resource settings

Johnston N, Sandys N, Geoghegan R, O'Donovan D, Flaherty G

J Travel Med, 2018 01 01;25(1).
PMID: 29394388 DOI: 10.1093/jtm/tax092

Background: Increasingly, medical students from developed countries are undertaking international medical electives in developing countries. Medical students understand the many benefits of these electives, such as the opportunity to develop clinical skills, to gain insight into global health issues and to travel to interesting regions of the world. However, they may be much less aware of the risk to their health and wellbeing while abroad. Compounding this problem, medical students may not seek advice from travel medicine practitioners and often receive inadequate or no information from their medical school prior to departure.
Methods: The PubMed database was searched for relevant literature relating to the health of medical elective students. Combinations of the following key words were used as search terms: 'international health elective', 'medical student' and 'health risks'. Articles were restricted to those published in English from 1997 through June 2017. A secondary review of the reference lists of these articles was performed. The grey literature was also searched for relevant material.
Results: This narrative literature review outlines the risks of clinical electives in resource-poor settings which include exposure to infectious illness, trauma, sexual health problems, excessive sun exposure, mental health issues and crime. Medical students may mitigate these health risks by being informed and well prepared for high-risk situations. The authors provide evidence-based travel advice which aims to improve pre-travel preparation and maximize student traveller safety. A safer and more enjoyable elective may be achieved if students follow road safety advice, take personal safety measures, demonstrate cultural awareness, attend to their psychological wellbeing and avoid risk-taking behaviours.
Conclusion: This article may benefit global health educators, international elective coordinators and travel medicine practitioners. For students, a comprehensive elective checklist, an inventory of health kit items and useful web-based educational resources are provided to help prepare for electives abroad.

Matched MeSH terms: Safety Management*
Fulltext Prevalence, source and severity of work-related injuries among "foreign" construction workers in a large Malaysian organisation: a cross-sectional study

Zerguine H, Tamrin SBM, Jalaludin J

Ind Health, 2018 Jun 01;56(3):264-273.
PMID: 29398685 DOI: 10.2486/indhealth.2017-0205

Malaysian construction sector is regarded as critical in the field of health because of the high rates of accidents and fatalities. This research aimed to determine the prevalence, sources and severity of injuries and its association with commitment to safety among foreign construction workers. A cross-sectional study was conducted among 323 foreign construction workers from six construction projects of a large organization in Malaysia, using a simple random sampling method. Data was collected using a structured questionnaire to assess work-related injuries and safety commitment. The collected data was analysed by SPSS 22.0 using descriptive statistics and χ2 test. The prevalence of work-related injuries in a one year period was 22.6%, where most of the injuries were of moderate severity (39.7%) and falls from heights represented the main source (31.5%). The majority of the foreign construction workers had perceived between moderate and high safety commitment, which was significantly associated with work-related injuries. The results also showed a significant association of work-related injuries with the company's interest in Safety and Health, Safety and Health training, and safety equipment. Thus, the implementation of new procedures and providing relevant trainings and safety equipment; will lead to a decrease in injury rates in construction sites.

Matched MeSH terms: Safety Management/statistics & numerical data
Perceived safety management practices in the logistics sector

Auyong HN, Zailani S, Surienty L

Work, 2016 Mar 09;53(4):729-35.
PMID: 26967037 DOI: 10.3233/WOR-162272

BACKGROUND: Malaysia's progress on logistics has been slowed to keep pace with its growth in trade. The Government has been pressing companies to improve the safety of their activities in order to reduce society's loss due to occupational accidents and illnesses. Occupational safety and health is a crucial part of a workplace because every worker has to take care of his/her own safety and health. The main occupational safety and health (OSH) national policy in Malaysia is the enactment of the Occupational Safety and Health Act (OSHA) 1994. Only those companies which have excellent health and safety care have good quality and productive employees. This study investigated safety management practices in the logistics sector.
OBJECTIVES: The present study is concerned with the human factors to safety in the logistics industry. The authors examined the perceived safety management practices of workers in the logistics sector. The purpose was to identify the perception of safety management practices of Malaysian logistics personnel.
METHODS: Survey questionnaires were distributed to assess logistics personnel about management commitment. The quantitative method using the availability sampling method was applied. The data gathered from the survey were analysed using SPSS software. The responses to the survey were rated according to the Likert scale type, with '1' indicating strongly disagree and '5' indicating strongly agree. One hundred and three employees of logistics functions completed the survey.
RESULTS: The highest mean scores were found for fire apparatus, prioritisation of safety, and safety policy.
CONCLUSIONS: The results from this study also emphasise the importance of the management's commitment in enhancing workplace safety. Specifically, companies should maintain good relations between the employer and the employee to help reduce workplace injuries.

Matched MeSH terms: Safety Management/standards*; Safety Management/statistics & numerical data
Off -site emergency planning

Mohamad bin Jamil

Journal of Occupational Safety and Health, 2005;2(1):23-29.
MyJurnal

Emergency in a major hazard installation may cause extensive damage to property and serious disruption both inside and outside the installation. The overall objectives of an emergency plan are: to localise the emergency and, if possible, eliminate it; and to minimise the effects of the accident on people and property. The off-site emergency plan is an integral part of any major hazard control system. In many countries the duty to prepare the off-site plan lies with the local authorities, including Malaysia. Thus, the preparations of written off-site emergency response planning is required to minimize the impact of major accident to the people , property and environment.

Matched MeSH terms: Safety Management
Occupational safety and health management in the construction industry: a review

Jaafar MH, Arifin K, Aiyub K, Razman MR, Ishak MIS, Samsurijan MS

Int J Occup Saf Ergon, 2018 Dec;24(4):493-506.
PMID: 28849991 DOI: 10.1080/10803548.2017.1366129

The construction industry plays a significant role in contributing to the economy and development globally. During the process of construction, various hazards coupled with the unique nature of the industry contribute to high fatality rates. This review refers to previous published studies and related Malaysian legislation documents. Four main elements consisting of human, worksite, management and external elements which cause occupational accidents and illnesses were identified. External and management elements are the underlying causes contributing to occupational safety and health (OSH), while human and worksite elements are more apparent causes of occupational accidents and illnesses. An effective OSH management approach is required to contain all hazards at construction sites. An approach to OSH management constructed by elements of policy, process, personnel and incentive developed in previous work is explored. Changes to the sub-elements according to previous studies and the related Malaysian legislation are also covered in this review.

Matched MeSH terms: Safety Management/legislation & jurisprudence; Safety Management/organization & administration*
OHSAS 18001 and MS 1722 Certification initiatives prove the commitment to sustainability

Wai Onn Hong

Journal of Occupational Safety and Health, 2013;10(2):27-36.
MyJurnal

Malaysia’s palm oil industry is growing in complexity and successively to succeed on the global level by accounts for about 36% of the word production of palm oil [1]. But, Occupational Health and Safety (OHS) issues are still problematic areas that need to be addressed by all parties concerned in this industry. In the olden days, unlike construction or manufacturing industry, palm oil industry was green in OHS management system. However, due to stringent in the legislative enforcement in the past few years, it has lead some of the plantation companies to develop OHS management system, which are based on Occupational Health and Safety Assessment Series (OHSAS), towards corporate sustainability. Sustainability is not about paying lip-service to the latest corporate buzzword; neither is it about superficially meeting minimum requirements for the sake of compliance. Rather, sustainability is a core value that lies at the heart of the companies’ business conduct. In practical terms, this means strive to operate with due consideration for the interest of all stakeholders by making the health and safety of all workers a priority. This paper describes the certification of OHSAS 18001 and MS 1722 in Genting Plantations Berhad (GENP) prove the commitment to sustainability by forming guiding principle on safety management. Further, this paper also demonstrates that the implementation of safety management can help to reduce the accident rate, especially fatal accident.

Matched MeSH terms: Safety Management

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links