MyMedR

Displaying publications 1 - 20 of 28 in total

Abstract:

Sort:

Sex estimation of Malaysian sub-adults using craniometrics: A computed tomography study

Syed Mohd Hamdan SN, Rahmat RA, Abdul Razak F, Abd Kadir KA, Mohd Faizal Abdullah ER, Ibrahim N

Leg Med (Tokyo), 2023 Sep;64:102275.
PMID: 37229938 DOI: 10.1016/j.legalmed.2023.102275

Sex estimation is crucial in biological profiling of skeletal human remains. Methods used for sex estimation in adults are less effective for sub-adults due to varied cranium patterns during the growth period. Hence, this study aimed to develop a sex estimation model for Malaysian sub-adults using craniometric measurements obtained through multi-slice computed tomography (MSCT). A total of 521 cranial MSCT dataset of sub-adult Malaysians (279 males, 242 females; 0-20 years old) were collected. Mimics software version 21.0 (Materialise, Leuven, Belgium) was used to construct three-dimensional (3D) models. A plane-to-plane (PTP) protocol was utilised to measure 14 selected craniometric parameters. Discriminant function analysis (DFA) and binary logistic regression (BLR) were used to statistically analyze the data. In this study, low level of sexual dimorphism was observed in cranium below 6 years old. The level was then increased with age. For sample validation data, the accuracy of DFA and BLR in estimating sex improved with age from 61.6% to 90.3%. All age groups except 0-2 and 3-6 showed high accuracy percentage (≥75%) when tested using DFA and BLR. DFA and BLR can be utilised to estimate sex for Malaysian sub-adult using MSCT craniometric measurements. However, BLR showed higher accuracy than DFA in sex estimation of sub-adults.

Matched MeSH terms: Skull/anatomy & histology
Fulltext Genomes of Pleistocene Siberian Wolves Uncover Multiple Extinct Wolf Lineages

Ramos-Madrigal J, Sinding MS, Carøe C, Mak SST, Niemann J, Samaniego Castruita JA, et al.

Curr Biol, 2021 01 11;31(1):198-206.e8.
PMID: 33125870 DOI: 10.1016/j.cub.2020.10.002

Extant Canis lupus genetic diversity can be grouped into three phylogenetically distinct clades: Eurasian and American wolves and domestic dogs.1 Genetic studies have suggested these groups trace their origins to a wolf population that expanded during the last glacial maximum (LGM)1-3 and replaced local wolf populations.4 Moreover, ancient genomes from the Yana basin and the Taimyr peninsula provided evidence of at least one extinct wolf lineage that dwelled in Siberia during the Pleistocene.35 Previous studies have suggested that Pleistocene Siberian canids can be classified into two groups based on cranial morphology. Wolves in the first group are most similar to present-day populations, although those in the second group possess intermediate features between dogs and wolves.67 However, whether this morphological classification represents distinct genetic groups remains unknown. To investigate this question and the relationships between Pleistocene canids, present-day wolves, and dogs, we resequenced the genomes of four Pleistocene canids from Northeast Siberia dated between >50 and 14 ka old, including samples from the two morphological categories. We found these specimens cluster with the two previously sequenced Pleistocene wolves, which are genetically more similar to Eurasian wolves. Our results show that, though the four specimens represent extinct wolf lineages, they do not form a monophyletic group. Instead, each Pleistocene Siberian canid branched off the lineage that gave rise to present-day wolves and dogs. Finally, our results suggest the two previously described morphological groups could represent independent lineages similarly related to present-day wolves and dogs.

Matched MeSH terms: Skull/anatomy & histology
Fulltext Morphometric approach to 3D soft-tissue craniofacial analysis and classification of ethnicity, sex, and age

Agbolade O, Nazri A, Yaakob R, Ghani AA, Cheah YK

PLoS One, 2020;15(4):e0228402.
PMID: 32271782 DOI: 10.1371/journal.pone.0228402

BACKGROUND: The application of three-dimensional scan models offers a useful resource for studying craniofacial variation. The complex mathematical analysis for facial point acquisition in three-dimensional models has made many craniofacial assessments laborious.
METHOD: This study investigates three-dimensional (3D) soft-tissue craniofacial variation, with relation to ethnicity, sex and age variables in British and Irish white Europeans. This utilizes a geometric morphometric approach on a subsampled dataset comprising 292 scans, taken from a Liverpool-York Head Model database. Shape variation and analysis of each variable are tested using 20 anchor anatomical landmarks and 480 sliding semi-landmarks.
RESULTS: Significant ethnicity, sex, and age differences are observed for measurement covering major aspects of the craniofacial shape. The ethnicity shows subtle significant differences compared to sex and age; even though it presents the lowest classification accuracy. The magnitude of dimorphism in sex is revealed in the facial, nasal and crania measurement. Significant shape differences are also seen at each age group, with some distinct dimorphic features present in the age groups.
CONCLUSIONS: The patterns of shape variation show that white British individuals have a more rounded head shape, whereas white Irish individuals have a narrower head shape. White British persons also demonstrate higher classification accuracy. Regarding sex patterns, males are relatively larger than females, especially in the mouth and nasal regions. Females presented with higher classification accuracy than males. The differences in the chin, mouth, nose, crania, and forehead emerge from different growth rates between the groups. Classification accuracy is best for children and senior adult age groups.

Matched MeSH terms: Skull/anatomy & histology*
Fulltext Automated craniofacial landmarks detection on 3D image using geometry characteristics information

Abu A, Ngo CG, Abu-Hassan NIA, Othman SA

BMC Bioinformatics, 2019 Feb 04;19(Suppl 13):548.
PMID: 30717658 DOI: 10.1186/s12859-018-2548-9

BACKGROUND: Indirect anthropometry (IA) is one of the craniofacial anthropometry methods to perform the measurements on the digital facial images. In order to get the linear measurements, a few definable points on the structures of individual facial images have to be plotted as landmark points. Currently, most anthropometric studies use landmark points that are manually plotted on a 3D facial image by the examiner. This method is time-consuming and leads to human biases, which will vary from intra-examiners to inter-examiners when involving large data sets. Biased judgment also leads to a wider gap in measurement error. Thus, this work aims to automate the process of landmarks detection to help in enhancing the accuracy of measurement. In this work, automated craniofacial landmarks (ACL) on a 3D facial image system was developed using geometry characteristics information to identify the nasion (n), pronasale (prn), subnasale (sn), alare (al), labiale superius (ls), stomion (sto), labiale inferius (li), and chelion (ch). These landmarks were detected on the 3D facial image in .obj file format. The IA was also performed by manually plotting the craniofacial landmarks using Mirror software. In both methods, once all landmarks were detected, the eight linear measurements were then extracted. Paired t-test was performed to check the validity of ACL (i) between the subjects and (ii) between the two methods, by comparing the linear measurements extracted from both ACL and AI. The tests were performed on 60 subjects (30 males and 30 females).
RESULTS: The results on the validity of the ACL against IA between the subjects show accurate detection of n, sn, prn, sto, ls and li landmarks. The paired t-test showed that the seven linear measurements were statistically significant when p

Matched MeSH terms: Skull/anatomy & histology*
On the integral use of foundational concepts in verifying validity during skull-photo superimposition

Jayaprakash PT

Forensic Sci Int, 2017 Sep;278:411.e1-411.e8.
PMID: 28754256 DOI: 10.1016/j.forsciint.2017.04.021

Often cited reliability test on video superimposition method integrated scaling face-images in relation to skull-images, tragus-auditory meatus relationship in addition to exocanthion-Whitnall's tubercle relationship when orientating the skull-image and wipe mode imaging in addition to mix mode imaging when obtaining skull-face image overlay and evaluating the goodness of match. However, a report that found higher false positive matches in computer assisted superimposition method transited from the above foundational concepts and relied on images of unspecified sizes that are lesser than 'life-size', frontal plane landmarks in the skull- and face- images alone for orientating the skull-image and mix images alone for evaluating the goodness of match. Recently, arguing the use of 'life-size' images as 'archaic', the authors who tested the reliability in the computer assisted superimposition method have denied any method transition. This article describes that the use of images of unspecified sizes at lesser than 'life-size' eliminates the only possibility to quantify parameters during superimposition which alone enables dynamic skull orientation when overlaying a skull-image with a face-image in an anatomically acceptable orientation. The dynamic skull orientation process mandatorily requires aligning the tragus in the 2D face-image with the auditory meatus in the 3D skull-image for anatomically orientating the skull-image in relation to the posture in the face-image, a step not mentioned by the authors describing the computer assisted superimposition method. Furthermore, mere reliance on mix type images during image overlay eliminates the possibility to assess the relationship between the leading edges of the skull- and face-image outlines as also specific area match among the corresponding craniofacial organs during superimposition. Indicating the possibility of increased false positive matches as a consequence of the above method transitions, the need for testing the reliability in the superimposition method adopting concepts that are considered safe is stressed.

Matched MeSH terms: Skull/anatomy & histology*
Orbital Morphometry: A Computed Tomography Analysis

Singh J, Rahman RA, Rajion ZA, Abdullah J, Mohamad I

J Craniofac Surg, 2017 Jan;28(1):e64-e70.
PMID: 27922969 DOI: 10.1097/SCS.0000000000003218

INTRODUCTION: The human orbit is a complex anatomic region, which plays predominant role in the evaluation of craniofacial complex. A thorough understanding of the relationship of the distance from orbital rim to the important vital structures of the orbital apex is required for the surgeon to perform safe and effective surgery.
OBJECTIVES: To evaluate and compare the depth and distances from various points of the orbital rim to the fissures and foramina of the orbital apex between genders in the local population.
METHODOLOGY: Linear measurements were conducted on 60 orbits from 30 patients who had undergone head computed tomography scan. These measurements were done utilizing the multiplanar reconstruction modes on computed tomography images with minimum slice thickness of 1 mm.
RESULTS: Males have statistically significant larger orbits than females with higher mean measurements in all parameters, except for the distance from posterior ethmoidal foramen to the optic canal which was the same. However, there were no significant differences in all parameters between the right and left orbits.
CONCLUSION: This study provides the absolute limit of safe internal orbital dissection in respect to the local population. Despite males having larger orbits than females, it is clinically negligible.

Matched MeSH terms: Skull/anatomy & histology
Study on the criteria for assessing skull-face correspondence in craniofacial superimposition

Ibáñez O, Valsecchi A, Cavalli F, Huete MI, Campomanes-Alvarez BR, Campomanes-Alvarez C, et al.

Leg Med (Tokyo), 2016 Nov;23:59-70.
PMID: 27890106 DOI: 10.1016/j.legalmed.2016.09.009

Craniofacial superimposition has the potential to be used as an identification method when other traditional biological techniques are not applicable due to insufficient quality or absence of ante-mortem and post-mortem data. Despite having been used in many countries as a method of inclusion and exclusion for over a century it lacks standards. Thus, the purpose of this research is to provide forensic practitioners with standard criteria for analysing skull-face relationships. Thirty-seven experts from 16 different institutions participated in this study, which consisted of evaluating 65 criteria for assessing skull-face anatomical consistency on a sample of 24 different skull-face superimpositions. An unbiased statistical analysis established the most objective and discriminative criteria. Results did not show strong associations, however, important insights to address lack of standards were provided. In addition, a novel methodology for understanding and standardizing identification methods based on the observation of morphological patterns has been proposed.

Matched MeSH terms: Skull/anatomy & histology*
Gaudio D, Olivieri L, De Angelis D, Poppa P, Galassi A, Cattaneo C. Reliability of craniofacial superimposition using three-dimension skull model. J Forensic Sci 2016; 61(1):5-11

Jayaprakash PT, Hadi H, Srinivasan A, Chellamuthu P, Abd Aziz Mohd Yusop R, Hashim N

J Forensic Sci, 2016 09;61(5):1390-3.
PMID: 27621069 DOI: 10.1111/1556-4029.13187
Matched MeSH terms: Skull/anatomy & histology*
Study on the performance of different craniofacial superimposition approaches (II): Best practices proposal

Damas S, Wilkinson C, Kahana T, Veselovskaya E, Abramov A, Jankauskas R, et al.

Forensic Sci Int, 2015 Dec;257:504-508.
PMID: 26482539 DOI: 10.1016/j.forsciint.2015.07.045

Craniofacial superimposition, although existing for one century, is still a controversial technique within the scientific community. Objective and unbiased validation studies over a significant number of cases are required to establish a more solid picture on the reliability. However, there is lack of protocols and standards in the application of the technique leading to contradictory information concerning reliability. Instead of following a uniform methodology, every expert tends to apply his own approach to the problem, based on the available technology and deep knowledge on human craniofacial anatomy, soft tissues, and their relationships. The aim of this study was to assess the reliability of different craniofacial superimposition methodologies and the corresponding technical approaches to this type of identification. With all the data generated, some of the most representative experts in craniofacial identification joined in a discussion intended to identify and agree on the most important issues that have to be considered to properly employ the craniofacial superimposition technique. As a consequence, the consortium has produced the current manuscript, which can be considered the first standard in the field; including good and bad practices, sources of error and uncertainties, technological requirements and desirable features, and finally a common scale for the craniofacial matching evaluation. Such a document is intended to be part of a more complete framework for craniofacial superimposition, to be developed during the FP7-founded project MEPROCS, which will favour and standardize its proper application.

Matched MeSH terms: Skull/anatomy & histology*
Study on the performance of different craniofacial superimposition approaches (I)

Ibáñez O, Vicente R, Navega DS, Wilkinson C, Jayaprakash PT, Huete MI, et al.

Forensic Sci Int, 2015 Dec;257:496-503.
PMID: 26060056 DOI: 10.1016/j.forsciint.2015.05.030

As part of the scientific tasks coordinated throughout The 'New Methodologies and Protocols of Forensic Identification by Craniofacial Superimposition (MEPROCS)' project, the current study aims to analyse the performance of a diverse set of CFS methodologies and the corresponding technical approaches when dealing with a common dataset of real-world cases. Thus, a multiple-lab study on craniofacial superimposition has been carried out for the first time. In particular, 26 participants from 17 different institutions in 13 countries were asked to deal with 14 identification scenarios, some of them involving the comparison of multiple candidates and unknown skulls. In total, 60 craniofacial superimposition problems divided in two set of females and males. Each participant follow her/his own methodology and employed her/his particular technological means. For each single case they were asked to report the final identification decision (either positive or negative) along with the rationale supporting the decision and at least one image illustrating the overlay/superimposition outcome. This study is expected to provide important insights to better understand the most convenient characteristics of every method included in this study.

Matched MeSH terms: Skull/anatomy & histology*
Relevance of Whitnall's tubercle and auditory meatus in diagnosing exclusions during skull-photo superimposition

Jayaprakash PT, Hashim N, Yusop RA

Forensic Sci Int, 2015 Aug;253:131.e1-10.
PMID: 26103927 DOI: 10.1016/j.forsciint.2015.04.026

Video vision mixer based skull-photo superimposition is a popular method for identifying skulls retrieved from unidentified human remains. A report on the reliability of the superimposition method suggested increased failure rates of 17.3 to 32% to exclude and 15 to 20% to include skulls while using related and unrelated face photographs. Such raise in failures prompted an analysis of the methods employed for the research. The protocols adopted for assessing the reliability are seen to vary from those suggested by the practitioners in the field. The former include overlaying the skull- and face-images on the basis of morphology by relying on anthropometric landmarks on the front plane of the face-images and evaluating the goodness of match depending on mix-mode images; the latter consist of orienting the skull considering landmarks on both the eye and ear planes of the face- and skull-images and evaluating the match utilizing images seen in wipe-mode in addition to those in mix-mode. Superimposition of a skull with face-images of five living individuals in two sets of experiments, one following the procedure described for the research on reliability and the other applying the methods suggested by the practitioners has shown that overlaying the images on the basis of morphology depending on the landmarks on the front plane alone and assessing the match in mix-mode fails to exclude the skull. However, orienting the skull relying on the relationship between the anatomical landmarks on the skull- and face-images such as Whitnall's tubercle and exocanthus in the front (eye) plane and the porion and tragus in the rear (ear) plane as well as assessing the match using wipe-mode images enables excluding that skull while superimposing with the same set of face-images.

Matched MeSH terms: Skull/anatomy & histology
Endoscopic fenestration at the splenial-habenular junctional area for symptomatic cavum and tumor at the foramen of Monro: case reports and anatomical review

Idris Z, Johnson JR, Abdullah JM

J. Neurosurg., 2015 Mar;122(3):504-10.
PMID: 25343181 DOI: 10.3171/2014.9.JNS132683

The splenial-habenular junctional area is an alternative site for neuroendoscopic fenestration to divert CSF flow into the quadrigeminal cistern in cases in which endoscopic third ventriculostomy is not amenable. In some patients with obstructive hydrocephalus, the splenium of the corpus callosum can be elevated from the habenular complex. This exposes the membranous connection between the splenium and habenula, which can be fenestrated to divert the CSF flow into the quadrigeminal cistern. This technique can be performed in patients in whom the foramen of Monro or the third ventricle is blocked by a lesion. Here, the authors present 3 complex cases that were managed by neuronavigation-guided transventricular transcavum endoscopic fenestration of the splenial-habenular junctional area. These cases may increase the knowledge and understanding of the anatomy of this region.

Matched MeSH terms: Skull/anatomy & histology
Conceptual transitions in methods of skull-photo superimposition that impact the reliability of identification: a review

Jayaprakash PT

Forensic Sci Int, 2015 Jan;246:110-21.
PMID: 25498986 DOI: 10.1016/j.forsciint.2014.10.043

Establishing identification during skull-photo superimposition relies on correlating the salient morphological features of an unidentified skull with those of a face-image of a suspected dead individual using image overlay processes. Technical progression in the process of overlay has included the incorporation of video cameras, image-mixing devices and software that enables real-time vision-mixing. Conceptual transitions occur in the superimposition methods that involve 'life-size' images, that achieve orientation of the skull to the posture of the face in the photograph and that assess the extent of match. A recent report on the reliability of identification using the superimposition method adopted the currently prevalent methods and suggested an increased rate of failures when skulls were compared with related and unrelated face images. The reported reduction in the reliability of the superimposition method prompted a review of the transition in the concepts that are involved in skull-photo superimposition. The prevalent popular methods for visualizing the superimposed images at less than 'life-size', overlaying skull-face images by relying on the cranial and facial landmarks in the frontal plane when orienting the skull for matching and evaluating the match on a morphological basis by relying on mix-mode alone are the major departures in the methodology that may have reduced the identification reliability. The need to reassess the reliability of the method that incorporates the concepts which have been considered appropriate by the practitioners is stressed.

Matched MeSH terms: Skull/anatomy & histology*
Fulltext A cryptic species of the Tylonycteris pachypus complex (Chiroptera: Vespertilionidae) and its population genetic structure in southern China and nearby regions

Huang C, Yu W, Xu Z, Qiu Y, Chen M, Qiu B, et al.

Int J Biol Sci, 2014;10(2):200-11.
PMID: 24550688 DOI: 10.7150/ijbs.7301

Three distinct bamboo bat species (Tylonycteris) are known to inhabit tropical and subtropical areas of Asia, i.e., T. pachypus, T. robustula, and T. pygmaeus. This study performed karyotypic examinations of 4 specimens from southern Chinese T. p. fulvidus populations and one specimen from Thai T. p. fulvidus population, which detected distinct karyotypes (2n=30) compared with previous karyotypic descriptions of T. p. pachypus (2n=46) and T. robustula (2n=32) from Malaysia. This finding suggested a cryptic Tylonycteris species within T. pachypus complex in China and Thailand. Morphometric studies indicated the difficulty in distinguishing the cryptic species and T. p. pachypus from Indonesia apart from the external measurements, which might be the reason for their historical misidentification. Based on 623 bp mtDNA COI segments, a phylogeographic examination including T. pachypus individuals from China and nearby regions, i.e., Vietnam, Laos, and Cambodia, was conducted to examine the population genetic structure. Genealogical and phylogeographical results indicated that at least two diverged lineages existed in these regions (average 3.4 % of Kimura 2-parameter distances) and their population structure did not match the geographic pattern. These results suggested that at least two historical colonizations have occurred by the cryptic species. Furthermore, through integration of traditional and geometric morphological results, morphological differences on zygomatic arches, toothrows and bullae were detected between two lineages in China. Given the similarity of vegetation and climate of Guangdong and Guangxi regions, we suggested that such differences might be derived from their historical adaptation or distinct evolutionary history rather than the differences of habitats they occurred currently.

Matched MeSH terms: Skull/anatomy & histology
Revision of the genus Leopoldamys (Rodentia, Muridae) as inferred from morphological and molecular data, with a special emphasis on the species composition in continental Indochina

Balakirev AE, Abramov AV, Rozhnov VV

Zootaxa, 2013;3640:521-49.
PMID: 26000434

A revision of the genus Leopoldamys is presented, and both the species composition and distribution in Indochina and Sundaic regions is reinvestigated. The phylogeny of the genus is recovered based on Cyt b, COI, and IRBP gene analyses. Five basal and 16 secondary monophyletic phylogenetic lineages were identified. A taxonomic reassessment of the continental and Sundaic populations is performed based on morphological verification of the genetically defined clades. Six clades were recovered in the phylogenetic analyses and correspond to morphologically defined species: L. revertens (distributed in lowlands of eastern and central Indochina), L. herberti (western and central Indochina, northward to northern Vietnam), L. edwardsi (China and northern Vietnam, northward of 21 degrees N), L. milleti (endemic of Dalat Plateau, southern Vietnam), L. sabanus (Borneo), and L. vociferans (lowlands of the Malacca Peninsula, northward to southwestern Thailand). The absence of proper L. sabanus in continental Indochina is revealed. The substitute name for the species known from the majority of Indochina under the name of L. sabanus should be L. revertens. The name L. neilli, which has been ascribed to populations from Thailand and Vietnam, is a junior synonym of L. herberti. Two related but rather divergent clades are found in Sumatra and the Malacca Peninsula. Based on their considerable genetic distances, these forms should be regarded as separate species from the L. sabanus type-bearing populations of Borneo, or as the members of L. sabanus polytypic superspecies. The substitute name for the lineage-bearing taxon from Malacca should be L. vociferans. The continental populations of Leopoldamys can be distinguished from each other by external and cranial characters and may be subdivided into four species. Two of these species (L. revertens and L. milleti) are well distinguished by external and cranial morphology, whereas the other two species (L. herberti and L. edwardsi) may be treated as sibling species that are difficult to distinguish based on morphological characters.

Matched MeSH terms: Skull/anatomy & histology
Craniodental affinities of Southeast Asia's "negritos" and the concordance with their genetic affinities

Bulbeck D

Hum Biol, 2013 Feb-Jun;85(1-3):95-133.
PMID: 24297222

Genetic research into Southeast Asia's "negritos" has revealed their deep-rooted ancestry, with time depth comparable to that of Southwest Pacific populations. This finding is often interpreted as evidence that negritos, in contrast to other Southeast Asians, can trace much of their ancestry directly back to the early dispersal of Homo sapiens in the order of 70 kya from Africa to Pleistocene New Guinea and Australia. One view on negritos is to lump them and Southwest Pacific peoples into an "Australoid" race whose geographic distribution had included Southeast Asia prior to the Neolithic incursion of "Mongoloid" farmers. Studies into Semang osteology have revealed some hints of Southwest Pacific affinities in cranial shape, dental morphology, and dental metrical "shape." On the other hand, the Andamanese have been shown to resemble Africans in their craniometrics and South Asians in their dental morphology, while Philippine negritos resemble Mongoloid Southeast Asians in these respects and also in their dental metrics. This study expands the scope of negrito cranial comparisons by including Melayu Malays and additional coverage of South Asians. It highlights the distinction between the Mongoloid-like Philippine negritos and the Andamanese and Semang (and Senoi of Malaya) with their non-Mongoloid associations. It proposes that the early/mid-Holocene dispersal of the B4a1a mitochondrial DNA clade across Borneo, the Philippines, and Taiwan may be important for understanding the distinction between Philippine and other negritos.

Matched MeSH terms: Skull/anatomy & histology*
Three-dimensional anatomical accuracy of cranial models created by rapid prototyping techniques validated using a neuronavigation station

Waran V, Devaraj P, Hari Chandran T, Muthusamy KA, Rathinam AK, Balakrishnan YK, et al.

J Clin Neurosci, 2012 Apr;19(4):574-7.
PMID: 22305869 DOI: 10.1016/j.jocn.2011.07.031

In neurosurgery and ear, nose and throat surgery the application of computerised navigation systems for guiding operations has been expanding rapidly. However, suitable models to train surgeons in using navigation systems are not yet available. We have developed a technique using an industrial, rapid prototyping process from which accurate spatial models of the cranium, its contents and pathology can be reproduced for teaching. We were able to register, validate and navigate using these models with common available navigation systems such as the Medtronic StealthStation S7®.

Matched MeSH terms: Skull/anatomy & histology*
Fulltext Change in facial shape in two cohorts of Japanese adult female students twenty years apart

Hossain MG, Saw A, Ohtsuki F, Lestrel PE, Kamarul T

Singapore Med J, 2011 Nov;52(11):818-23.
PMID: 22173252

Secular changes in the head and body dimensions of the Japanese population were recorded during the last century, but studies on Japanese adult facial shape were poorly documented. This study aimed to document the secular changes in facial shape and their association with craniofacial measures of Japanese adult female students.

Matched MeSH terms: Skull/anatomy & histology
Fulltext Craniofacial morphology of Malay patients with obstructive sleep apnoea

Albajalan OB, Samsudin AR, Hassan R

Eur J Orthod, 2011 Oct;33(5):509-14.
PMID: 21118908 DOI: 10.1093/ejo/cjq108

The aim of this study was to compare the skeletal and soft tissue patterns between obstructive sleep apnoea (OSA) patients and control group of non-OSA patients. Fifty Malays (32 males and 18 females) aged 18-65 years divided into two equal groups 25 (17 males and 8 females) with OSA and a control group 25 subjects (15 males and 10 females). Both groups were diagnosed using polysomnography. Nineteen variables related to craniofacial skeletal and soft tissue morphology were measured on lateral cephalometric films. Analysis of covariance was used to compare the means between the two groups. The results showed that OSA subjects had a significant increase in body mass index (BMI) and neck circumference than the control group. The soft palate and tongue were longer and thicker in OSA patients. In addition, upper, middle, and lower posterior airway spaces were narrower, the hyoid bone was more inferior and posterior, and the cranial base flexure angle was significantly acute when compared with the control group. The findings indicate that craniofacial abnormalities play significant roles in the pathogenesis of OSA in Malay patients.

Matched MeSH terms: Skull/anatomy & histology*
Fulltext Craniofacial anthropometric norms of Malays

Ngeow WC, Aljunid ST

Singapore Med J, 2009 May;50(5):525-8.
PMID: 19495526

INTRODUCTION: This study was undertaken to establish the craniofacial anthropometric norms of young adult Malaysian Malays.
METHODS: The study group consisted of convenient samples of 100 healthy volunteers (aged 18-25 years), with an equal number of female and male subjects who had no history of mixed racial parentage. 22 linear measurements were taken twice from 22 landmarks over six craniofacial regions.
RESULTS: The Malays shared many similar sizes of measurements with the Singaporean Chinese. Their left eye fissure length and mouth width (ch-ch) were almost identical for both genders. However, Malay females had an upper lip height (sn-sto) (left) and ear width (pra-pa) similar to Singaporean Chinese females. Six other measurements, viz. the head width (eu-eu), head circumference (on-op), face height (n-gn), lower face height (sn-gn), (left) eye fissure height (ps-pi), cutaneous upper lip height (sn-ls) and cutaneous upper lip height (ls-sto), were 0.4-4.3 mm less in the Malays. Measurements for another four parameters, viz. the length of the head (g-op), biocular width (ex-ex), lower vermillion height (sto-li) and (left) ear length (sa-sba), were 0.5-3.6 mm higher in the Malays. Only three measurements were obviously different; the height of the head (v-n) and intercanthal width (en-en), were lower, and the protrusion of the nasal tip (sn-prn) was higher in the Malays.
CONCLUSION: These findings suggest that three features, i.e. the height of the head (v-n), intercanthal width (en-en) and protrusion of the nasal tip (sn-prn) may be useful in differentiating a Malay face from a Singaporean Chinese one.

Matched MeSH terms: Skull/anatomy & histology*

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links