Displaying publications 21 - 35 of 35 in total

Abstract:
Sort:
  1. Fulltext Flexural Strength of Internally Stiffened Tubular Steel Beam Filled with Recycled Concrete Materials
    Al Zand AW, Ali MM, Al-Ameri R, Badaruzzaman WHW, Tawfeeq WM, Hosseinpour E, et al.
    Materials (Basel), 2021 Oct 23;14(21).
    PMID: 34771860 DOI: 10.3390/ma14216334
    The flexural strength of Slender steel tube sections is known to achieve significant improvements upon being filled with concrete material; however, this section is more likely to fail due to buckling under compression stresses. This study investigates the flexural behavior of a Slender steel tube beam that was produced by connecting two pieces of C-sections and was filled with recycled-aggregate concrete materials (CFST beam). The C-section's lips behaved as internal stiffeners for the CFST beam's cross-section. A static flexural test was conducted on five large scale specimens, including one specimen that was tested without concrete material (hollow specimen). The ABAQUS software was also employed for the simulation and non-linear analysis of an additional 20 CFST models in order to further investigate the effects of varied parameters that were not tested experimentally. The numerical model was able to adequately verify the flexural behavior and failure mode of the corresponding tested specimen, with an overestimation of the flexural strength capacity of about 3.1%. Generally, the study confirmed the validity of using the tubular C-sections in the CFST beam concept, and their lips (internal stiffeners) led to significant improvements in the flexural strength, stiffness, and energy absorption index. Moreover, a new analytical method was developed to specifically predict the bending (flexural) strength capacity of the internally stiffened CFST beams with steel stiffeners, which was well-aligned with the results derived from the current investigation and with those obtained by others.
  2. Sources and management of marine litter pollution along the Bay of Bengal coast of Bangladesh
    Islam MS, Phoungthong K, Islam ARMT, Ali MM, Ismail Z, Shahid S, et al.
    Mar Pollut Bull, 2022 Dec;185(Pt B):114362.
    PMID: 36410195 DOI: 10.1016/j.marpolbul.2022.114362
    Marine debris is often detected everywhere in the oceans after it enters the marine ecosystems from various sources. Marine litter pollution is a major threat to the marine ecosystem in Bangladesh. A preliminary study was conducted to identify the sources of marine litter (plastics, foamed plastic, clothes, glass, ceramic, metals, paper, and cardboard) along the Bay of Bengal coast. From the observations, the range of abundance of the collected marine litter was 0.14-0.58 items/m2. From the ten sampling sites, the highest amount of marine litter was observed for aluminium cans (3500), followed by plastic bottles (3200). The spatial distribution pattern indicated that all the study areas had beach litter of all types of materials. The present investigation showed that plastics were the dominating pollutants in the marine ecosystem in Bangladesh. The clean-coast index (CCI) value indicated that the Cox's Bazar coast was clean to dirty class. The abundance, distribution, and pollution of marine litter along the coastal belts pose a potential threat to the entire ecosystem. This study will help come up with ways to manage and get rid of marine litter along the coast in an effective way.
  3. Tracing sewage contamination based on sterols and stanols markers within the mainland aquatic ecosystem: a case study of Linggi catchment, Malaysia
    Abdul Zali M, Juahir H, Ismail A, Retnam A, Idris AN, Sefie A, et al.
    Environ Sci Pollut Res Int, 2021 Apr;28(16):20717-20736.
    PMID: 33405159 DOI: 10.1007/s11356-020-11680-5
    Sewage contamination is a principal concern in water quality management as pathogens in sewage can cause diseases and lead to detrimental health effects in humans. This study examines the distribution of seven sterol compounds, namely coprostanol, epi-coprostanol, cholesterol, cholestanol, stigmasterol, campesterol, and β-sitosterol in filtered and particulate phases of sewage treatment plants (STPs), groundwater, and river water. For filtered samples, solid-phase extraction (SPE) was employed while for particulate samples were sonicated. Quantification was done by using gas chromatography-mass spectrometer (GC-MS). Faecal stanols (coprostanol and epi-coprostanol) and β-sitosterol were dominant in most STP samples. Groundwater samples were influenced by natural/biogenic sterol, while river water samples were characterized by a mixture of sources. Factor loadings from principal component analysis (PCA) defined fresh input of biogenic sterol and vascular plants (positive varimax factor (VF)1), aged/treated sewage sources (negative VF1), fresh- and less-treated sewage and domestic sources (positive VF2), biological sewage effluents (negative VF2), and fresh-treated sewage sources (VF3) in the samples. Association of VF loadings and factor score values illustrated the correlation of STP effluents and the input of biogenic and plant sterol sources in river and groundwater samples of Linggi. This study focuses on sterol distribution and its potential sources; these findings will aid in sewage assessment in the aquatic environment.
  4. Mitigation of bio-corrosion characteristics of coronary artery stent by optimising fs-laser micromachining parameters
    Chenrayan V, Palanisamy D, Mani K, Shahapurkar K, Elahi M Soudagar M, Fouad Y, et al.
    Heliyon, 2024 Mar 30;10(6):e28057.
    PMID: 38545133 DOI: 10.1016/j.heliyon.2024.e28057
    Cardiovascular diseases, particularly coronary artery disease, pose big challenges to human life. Deployment of the stent is a preferable treatment for the above-mentioned disease. However, stents are usually made up of shape memory alloy called Nitinol. The poorer surface finish on the machined nitinol stents accelerates the migration of Nickel ions from the implanted nitinol stent, which is considered toxic and can lead to stenosis. The current study deals with controlling surface quality by minimising surface roughness and improving corrosion resistance. Femtosecond laser (fs-laser 10-15 s) micromachining was employed to machine the Nitinol surface to achieve sub-micron surface roughness. The Grey relational analysis (GRA)-coupled design of the experimental technique was implemented to determine optimal levels of four micromachining parameters (laser power, pulse frequency, scanning speed, and scanning pattern) varied at three levels to achieve minimum surface roughness and to maximise the volume ablation. The results show that to yield minimum surface roughness and maximum volume ablation, laser power and scanning speed are in a higher range. In contrast, the pulse frequency is lower, and the scanning pattern is in a zig-zag manner. ANOVA results manifest that scanning speed is the predominant factor in minimising surface roughness, followed by pulse frequency. Furthermore, the corrosion behaviour of the machined nitinol specimens was evaluated, and the results show that specimens with lower surface roughness had lower corrosion rates.
  5. Anthropogenic waste indicators (AWIs), particularly PAHs and LABs, in Malaysian sediments: Application of aquatic environment for identifying anthropogenic pollution
    Masood N, Zakaria MP, Halimoon N, Aris AZ, Magam SM, Kannan N, et al.
    Mar Pollut Bull, 2016 Jan 15;102(1):160-75.
    PMID: 26616745 DOI: 10.1016/j.marpolbul.2015.11.032
    Polycyclic aromatic hydrocarbons (PAHs) and linear alkylbenzenes (LABs) were used as anthropogenic markers of organic chemical pollution of sediments in the Selangor River, Peninsular Malaysia. This study was conducted on sediment samples from the beginning of the estuary to the upstream river during dry and rainy seasons. The concentrations of ƩPAHs and ƩLABs ranged from 203 to 964 and from 23 to 113 ng g(-1) dry weight (dw), respectively. In particular, the Selangor River was found to have higher sedimentary levels of PAHs and LABs during the wet season than in the dry season, which was primarily associated with the intensity of domestic wastewater discharge and high amounts of urban runoff washing the pollutants from the surrounding area. The concentrations of the toxic contaminants were determined according to the Sediment Quality Guidelines (SQGs). The PAH levels in the Selangor River did not exceed the SQGs, for example, the effects range low (ERL) value, indicating that they cannot exert adverse biological effects.
  6. Seasonal variability of anthropogenic indices of PAHs in sediment from the Kuala Selangor River, west coast Peninsular Malaysia
    Masood N, Halimoon N, Aris AZ, Zakaria MP, Vaezzadeh V, Magam SM, et al.
    Environ Geochem Health, 2018 Dec;40(6):2551-2572.
    PMID: 29802607 DOI: 10.1007/s10653-018-0122-z
    Rapid increase in industrialization and urbanization in the west coast of Peninsular Malaysia has led to the intense release of petroleum and products of petroleum into the environment. Surface sediment samples were collected from the Selangor River in the west coast of Peninsular Malaysia during four climatic seasons and analyzed for PAHs and biomarkers (hopanes). Sediments were soxhlet extracted and further purified and fractionated through first and second step column chromatography. A gas chromatography-mass spectrometry (GC-MS) was used for analysis of PAHs and hopanes fractions. The average concentrations of total PAHs ranged from 219.7 to 672.3 ng g-1 dw. The highest concentrations of PAHs were detected at 964.7 ng g-1 dw in station S5 in the mouth of the Selangor River during the wet inter-monsoonal season. Both pyrogenic and petrogenic PAHs were detected in the sediments with a predominance of the former. The composition of hopanes was homogeneous showing that petroleum hydrocarbons share an identical source in the study area. Diagnostic ratios of hopanes indicated that some of the sediment samples carry the crankcase oil signature.
  7. Nanotechnology-based drug delivery systems for Alzheimer's disease management: Technical, industrial, and clinical challenges
    Wen MM, El-Salamouni NS, El-Refaie WM, Hazzah HA, Ali MM, Tosi G, et al.
    J Control Release, 2017 01 10;245:95-107.
    PMID: 27889394 DOI: 10.1016/j.jconrel.2016.11.025
    Alzheimer's disease (AD) is a neurodegenerative disease with high prevalence in the rapidly growing elderly population in the developing world. The currently FDA approved drugs for the management of symptomatology of AD are marketed mainly as conventional oral medications. Due to their gastrointestinal side effects and lack of brain targeting, these drugs and dosage regiments hinder patient compliance and lead to treatment discontinuation. Nanotechnology-based drug delivery systems (NTDDS) administered by different routes can be considered as promising tools to improve patient compliance and achieve better therapeutic outcomes. Despite extensive research, literature screening revealed that clinical activities involving NTDDS application in research for AD are lagging compared to NTDDS for other diseases such as cancers. The industrial perspectives, processability, and cost/benefit ratio of using NTDDS for AD treatment are usually overlooked. Moreover, active and passive immunization against AD are by far the mostly studied alternative AD therapies because conventional oral drug therapy is not yielding satisfactorily results. NTDDS of approved drugs appear promising to transform this research from 'paper to clinic' and raise hope for AD sufferers and their caretakers. This review summarizes the recent studies conducted on NTDDS for AD treatment, with a primary focus on the industrial perspectives and processability. Additionally, it highlights the ongoing clinical trials for AD management.
  8. Trace element speciation in sludge: a preliminary study to assess contamination levels in the sewage network
    Islam MS, Phoungthong K, Ismail Z, Othman IK, Shahid S, Ishak DSM, et al.
    J Environ Sci Health A Tox Hazard Subst Environ Eng, 2022;57(13-14):1073-1083.
    PMID: 36644961 DOI: 10.1080/10934529.2022.2148811
    The spreading of sewage sludge from wastewater treatment plants and various industries arouses the growing interest due to the contamination by trace elements. Sludges were collected from one sewage treatment plant and two industries in Dhaka City, Bangladesh to assess physicochemical parameters and total and fraction content of trace elements like Cr, Ni, Cu, As, Cd, Pb, Fe, Mn and Zn in sludges. We evaluated the bioavailability of theses metals by determining their speciation by sequential extraction, each metal being distributed among five fractions: exchangeable fraction, bound to carbonate fraction, Fe-Mn oxide bound fraction, organic matter bound fraction and residual fractions. We found that all the analyzed sludges had satisfactory properties from an agronomic quality point of view. The average concentration (mg/kg) of trace metals in sludge samples were in the following decreasing order Fe (12807) > Cr (200) > Mn (158) > Zn (132) > Cu (68.2) > Ni (42.5) > Pb (36.4) > As (35.1) > Cd (3.7). The results of the sequential extraction showed that Cr, Ni, Cu, Fe and Mn were largely associated with the residual fraction where As, Cd and Pb was dominantly associated with the exchangeable and carbonate bound fractions and Zn showed a considerable proportion in carbonate bound fraction. These results showed that regulations must take into account the bioavailability with regard to the characteristics of the agricultural soils on which sludge will be spread.
  9. Fulltext First-principles calculations to investigate structural, electronic, elastic and optical properties of radium based cubic fluoro-perovskite materials
    Shahzad MK, Hussain S, Farooq MU, Laghari RA, Bilal MH, Khan SA, et al.
    Heliyon, 2023 Feb;9(2):e13687.
    PMID: 36873152 DOI: 10.1016/j.heliyon.2023.e13687
    Perovskite materials play a vital role in the field of material science via experimental as well as theoretical calculations. Radium semiconductor materials are considered the backbone of medical fields. These materials are considered in high technological fields to be used as controlling the decay ability. In this study, radium-based cubic fluoro-perovskite XRaF3 (where X = Rb and Na) are calculated using a DFT (density functional theory). These compounds are cubic nature with 221 space groups that construct on CASTEP (Cambridge-serial-total-energy-package) software with ultra-soft PPPW (pseudo-potential plane-wave) and GGA (Generalized-Gradient-approximation)-PBE (Perdew-Burke-Ernzerhof) exchange-correlation functional. The structural, optical, electronic, and mechanical properties of the compounds are calculated. According to the structural properties, NaRaF3 and RbRaF3 have a direct bandgap with 3.10eV and 4.187eV of NaRaF3 and RbRaF3, respectively. Total density of states (DOS) and partial density of states (PDOS) provide confirmation to the degree of electrons localized in distinct bands. NaRaF3 material is semiconductors and RbRaF3 is insulator, according to electronic results. The imaginary element dispersion of the dielectric function reveals its wide variety of energy transparency. In both compounds, the optical transitions are examined by fitting the damping ratio for the notional dielectric function scaling to the appropriate peaks. The absorption and the conductivity of NaRaF3 compound is better than the RbRaF3 compound which make it suitable for the solar cell applications increasing the efficiency and work function. We observed that both compounds are mechanically stable with cubic structure. The criteria for the mechanical stability of compounds are also met by the estimated elastic results. These compounds have potential application in field of solar cell and medical.

    OBJECTIVES: The band gap, absorption and the conductivity are necessary conditions for potential applications. Here, literature was reviewed to check computational translational insight into the relationships between absorption and conductivity for solar cell and medical applications of novel RbRaF3 and NaRaF3 compounds.

  10. Fulltext Effects of microplastic and heavy metals on coral reefs: A new window for analytical research
    Islam MS, Islam ARMT, Ismail Z, Ahmed MK, Ali MM, Kabir MH, et al.
    Heliyon, 2023 Nov;9(11):e22692.
    PMID: 38074858 DOI: 10.1016/j.heliyon.2023.e22692
    In the modern world, plastic trash has been recognized as a global issue, and studies on microplastics (MPs) in the marine and inland environments have previously been conducted. Marine ecosystems act as a bio-diverse ecosystem where coral reefs contribute to make a sound living of the coastal people by gathering natural resources. The current study indicates that MPs and heavy metals (HMs) accumulation to biofilm and organic matter through sedimentation, precipitation, adsorption, and desorption that may have potential effect on growth and development of coral reefs in the marine ecosystems. However, the knowledge of distribution, impact, mechanism, degradation, and association mechanisms between MPs and HMs in the natural environment may open a new window for conducting analytical research from an ecological viewpoint. The current study thus summarizes the types of marine samples with the analytical techniques, polymers of MPs, and their impact on corals and other marine biota. This study also identifies existing knowledge gaps and recommends fresh lines of inquiry in light of recent developments in MPs and HMs research on the marine ecosystems. Overall, the present study suggests a sustainable intervention for reducing MPs and HMs from the marine ecosystems by demonstrating their existence in water, sediment, fish, corals, and other biota, and their impending ecotoxicological impacts on the environment and human health. The impacts of MPs and HMs on coral reefs are critically assessed in this study in light of the most recent scientific knowledge, existing laws, and new suggestions to minimize their contamination in the marine ecosystems.
  11. Correction to: Heavy metals in popularly sold branded cigarettes in Bangladesh and associated health hazards from inhalation exposure
    Hasan M, Hossain MM, Abrarin S, Kormoker T, Billah MM, Bhuiyan MKA, et al.
    Environ Sci Pollut Res Int, 2023 Oct;30(46):103364.
    PMID: 37723402 DOI: 10.1007/s11356-023-29946-z
  12. Heavy metals in popularly sold branded cigarettes in Bangladesh and associated health hazards from inhalation exposure
    Hasan M, Hossain MM, Abrarin S, Kormoker T, Billah MM, Bhuiyan MKA, et al.
    Environ Sci Pollut Res Int, 2023 Sep;30(45):100828-100844.
    PMID: 37644270 DOI: 10.1007/s11356-023-29491-9
    Tobacco products are widely recognized as a major contributor to death. Cigarette smoke contains several toxic chemicals including heavy metals particulate causing high health risks. However, limited information has been available on the health risks associated with the heavy metals in cigarettes commonly sold in the Bangladeshi market. This study evaluated the concentrations and potential health risks posed by ten concerned heavy metals in ten widely consumed cigarette brands in Bangladesh using an atomic absorption spectrometer. The concentration (mg/kg) ranges of heavy metals Pb, Cd, Cr, As, Co, Ni, Mn, Fe, Cu, and Zn vary between 0.46-1.05, 0.55-1.03, 0.80-1.2, 0.22-0.40, 0.46-0.78, 2.59-3.03, 436.8-762.7, 115.8-184.4, 146.6-217.7, and 34.0-42.7, respectively. We assume that the heavy metals content among cigarette brands is varied due to the differences in the source of tobacco they use for cigarette preparation. The carcinogenic risks posed by heavy metals follow the order of Cr > Co > Cd > As > Ni > Pb, while the non-carcinogenic risks for Cu, Zn, Fe, and Mn were greater than unity (HQ > 1), except for Fe. The existence of toxic heavy metals in cigarette tobacco may thus introduce noticeable non-carcinogenic and carcinogenic health impacts accompanying inhalation exposure. This study provides the first comprehensive report so far on heavy metal concentration and associated health risks in branded cigarettes commonly sold in Bangladesh. Hence, this data and the information provided can serve as a baseline as well as a reference for future research and have potential implications for policy and legislation in Bangladesh.
  13. Phenotypic and genotypic comparison of pathogenic group B Streptococcus isolated from human and cultured tilapia (Oreochromis species) in Malaysia
    Muthanna A, Desa MNM, Alsalemi W, Liyana Abd Aziz NA, Dzaraly ND, Baharin NHZ, et al.
    Comp Immunol Microbiol Infect Dis, 2023 Jun;97:101993.
    PMID: 37167694 DOI: 10.1016/j.cimid.2023.101993
    Group B Streptococcus (GBS) is a major cause of several infectious diseases in humans and fish. This study was conducted to compare human and fish-derived GBS in terms of their antimicrobial susceptibility, serotype, virulence and pili genes and sequence type (ST), and to determine whether there is a potential linkage of zoonotic transmission in Malaysia. GBS isolated from humans and fish had similar phenotypic characteristics and differed in virulence gene profile, antimicrobial susceptibility, serotype and sequence type. Fish GBS isolates had lower genetic diversity and higher antibiotic susceptibility than human isolates. We report a rare detection of the potentially fish-adapted ST283 in human GBS isolates. Both human and fish ST283 shared several phenotypic and genotypic features, including virulence and pilus genes and antimicrobial susceptibility, illustrating the value of monitoring GBS within the One Health scope. In this study, two human GBS ST283 isolates belonging to the variant common in fish hosts were identified, raising awareness of the zoonotic potential between the different species in Malaysia.
  14. Fulltext Risk factors for disease severity among children with Covid-19: a clinical prediction model
    Ng DC, Liew CH, Tan KK, Chin L, Ting GSS, Fadzilah NF, et al.
    BMC Infect Dis, 2023 Jun 12;23(1):398.
    PMID: 37308825 DOI: 10.1186/s12879-023-08357-y
    BACKGROUND: Children account for a significant proportion of COVID-19 hospitalizations, but data on the predictors of disease severity in children are limited. We aimed to identify risk factors associated with moderate/severe COVID-19 and develop a nomogram for predicting children with moderate/severe COVID-19.

    METHODS: We identified children ≤ 12 years old hospitalized for COVID-19 across five hospitals in Negeri Sembilan, Malaysia, from 1 January 2021 to 31 December 2021 from the state's pediatric COVID-19 case registration system. The primary outcome was the development of moderate/severe COVID-19 during hospitalization. Multivariate logistic regression was performed to identify independent risk factors for moderate/severe COVID-19. A nomogram was constructed to predict moderate/severe disease. The model performance was evaluated using the area under the curve (AUC), sensitivity, specificity, and accuracy.

    RESULTS: A total of 1,717 patients were included. After excluding the asymptomatic cases, 1,234 patients (1,023 mild cases and 211 moderate/severe cases) were used to develop the prediction model. Nine independent risk factors were identified, including the presence of at least one comorbidity, shortness of breath, vomiting, diarrhea, rash, seizures, temperature on arrival, chest recessions, and abnormal breath sounds. The nomogram's sensitivity, specificity, accuracy, and AUC for predicting moderate/severe COVID-19 were 58·1%, 80·5%, 76·8%, and 0·86 (95% CI, 0·79 - 0·92) respectively.

    CONCLUSION: Our nomogram, which incorporated readily available clinical parameters, would be useful to facilitate individualized clinical decisions.

  15. Contamination and ecological risk assessment of Cr, As, Cd and Pb in water and sediment of the southeastern Bay of Bengal coast in a developing country
    Islam MS, Islam MT, Antu UB, Saikat MSM, Ismail Z, Shahid S, et al.
    Mar Pollut Bull, 2023 Dec;197:115720.
    PMID: 37939519 DOI: 10.1016/j.marpolbul.2023.115720
    Safe levels of heavy metals in the surface water and sediment of the eastern Bay of Bengal coast have not been universally established. Current study characterized heavy metals such as arsenic (As), chromium (Cr), cadmium (Cd) and lead (Pb) in surface water and sediments of the most important fishing resource at the eastern Bay of Bengal coast, Bangladesh. Both water and sediment samples were analyzed using inductively coupled plasma mass spectrometer. Considering both of the seasons, the mean concentrations of Cr, As, Cd, and Pb in water samples were 33.25, 8.14, 0.48, and 21.14 μg/L, respectively and in sediment were 30.47, 4.48, 0.20, and 19.98 mg/kg, respectively. Heavy metals concentration in water samples surpassed the acceptable limits of usable water quality, indicating that water from this water resource is not safe for drinking, cooking, bathing, and any other uses. Enrichment factors also directed minor enrichment of heavy metals in sediment of the coast. Other indexes for ecological risk assessment such as pollution load index (PLI), contamination factor (CF), geoaccumulation index (Igeo), modified contamination degree (mCd), and potential ecological risk index (PERI) also indicated that sediment of the coastal watershed was low contamination. In-depth inventorying of heavy metals in both water and sediment of the study area are required to determine ecosystem health for holistic risk assessment and management.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links