Membrane technologies have received high interest in the separation gas mixture. The
ceramic inorganic membranes have possessed high permeability, excellent thermal,
chemical and mechanical stabilities compared to conventional polymer membranes.
This work presents the fabrication of silica ceramic membrane by sol dip-coating
method. The tubular support was dipped into the solution of tetrethylorthosilicate
(TEOS), distilled water and ethanol with the addition of nitric acid as a catalyst. The
fabricated silica membrane was then characterized by (Field Emission Scanning
Electron Microscope) FESEM and (Fourier transform infrared spectroscopy) FTIR to
determine structural and chemical properties at different dipping number. FESEM
images indicate that the silica has been deposited on the surface fabricated ceramic
membrane and penetrate into the pore walls. However, number of dipping did not
affect the intensity peak of FTIR analysis.
The water shortage in Selangor Northwest Project rice granary areas has been growing
concern. The increase in plant capacity and the El Nino phenomenon that hit Malaysia
(1998 & 2016) has cause the main source of irrigation; surface water and rainfall, could
no longer meet the needs of paddy. As a consequence, paddy productivity has
becoming serious concern and urge for alternative irrigation water supply. At the same
time, the use of groundwater as a source of alternative supply of irrigation water has
started to get attentions. However, to determine the potential groundwater aquifer,
preliminary study should be made in advance. Thus, the focus of this paper is to
investigate the geological structure of the Selangor Basin by means analysis of
borehole information. A total of 56 tube wells data were used to obtain layers of
subsurface in the study area. By using groundwater modelling software (Visual
MODFLOW), a model that represents an actual geological conditions has been made.
A total of 6 subsurface layers have been identified. The result of study showed that,
the geological formations of the study area mainly consist of three types; alluvium,
sedimentary and metamorphic rock.
The purpose of this research is to enhance the gain signal amplification by using dual
pump double pass configuration in comparative with single pump double pass that are
commonly used as conventional optical amplifier configuration in optical
communication system nowadays. Two input signals power have been implemented
which are -30 and 0 decibel (dB). The input signal defined as low and high input signals
power by using a pump power of 1480 nm. The amplification of EDFA in this study have
been taken place in conventional band (C) band and long wavelength band (L) band of
EDFA within the range of 1515 to 1615 nm. Therefore, to understand the performance
of the gain amplification, the OptiSystem software simulator version 13 has been used
for simulation and the values of fiber length and pump power has been varied for both
configurations. It has been found that the, dual pump double pass configuration has
shown better gain performance at lower input signal power compared to the single
pump double pass configuration.
Parameter estimation of complex exponential signals corrupted by additive white
Gaussian noise (AWGN) is crucial in the study of distributed beamforming in a practical
scenario. Near zero (0) phase offset are expected at the receiver end which rely on the
smoothing and correction of the frequency and phase estimates. Neither
computational complexity nor the processing latency has an effect on the expected
zero phase offset but the estimation accuracy does. Thus, the maximum likelihood
estimator (MLE) using Fast Fourier Transform (FFT) approach is being considered for
cases with none and post processing in locating of the maximum peaks. Details on how
the phase estimates are arrived at is not always covered in literatures but explained in
the article. Numerical results obtained showed that global maximum peaks are arrived
at by employing a fine search with higher values of FFT.
In this paper, we demonstrate a modified scheme for solving the nonlinear KleinGordon
equation of PDE hyperbolic types. The Klein-Gordon equation is a relativistic
wave equation version of the Schrodinger equation, which is widely used in quantum
mechanics. Additionally, the nonstandard finite difference scheme has been used
extensively to solve differential equations and we have constructed a modified scheme
based on the nonstandard finite difference scheme associated with harmonic mean
averaging for solving the nonlinear inhomogeneous Klein-Gordon equation where the
denominator is replaced by an unusual function. The numerical results obtained have
been compared and showed to have a good agreement with results attained using the
standard finite difference (CTCS) procedure, which provided that the proposed scheme
is reliable. Numerical experiments are tested to validate the accuracy level of the
scheme with the analytical results.
This paper aim is to design an education kit for wastewater system that can maintain
the standard parameters of neutralized wastewater by maintaining the suitable pH
(Potential Hydronium) level and temperature of the wastewater from industry by using
fuzzy controller. This study is capable to control the unwanted bacteria by automatic
regulatory and monitoring the temperature, pH and water level. Fuzzy logic method is
use to control and monitor pH level as well as the temperature during clarifying process
because pH control process is a complex physical-chemistry process of strong
individuality of time-varying and non-linearity properties. Pumps used in the prototype
need to be controlled precisely to enable either acid or base to be pumped into mix
tank of the wastewater treatment. The control and monitoring system, which has been
designed through LabVIEW front panel will ease end user in inspection of the
parameters involve in wastewater treatment. The entire system output could be
observed remotely in Data Dashboard application in smartphone or tablet. The GUI
was designed and interfaced with the prototype constructed to carry out the process
of controlling and monitoring the required parameters. Few tests were conducted
repetitively to analyse the performance of the system parameters. It was found that
the controlled set point fixed within the range of pH 7.6-8.4, temperature 25-29.44
Celsius and water level of 20cm in this research that was effectively achieved in the
entire test conducted. In addition, the wastewater system accuracy and performance
is 96.72% and 90.22% respectively.
This paper aims to explore the level of manufacturing performance, environmental
actions and customer activities in implementing green supply chain initiatives. Besides,
the relationship between environmental actions and customer activities towards
manufacturing performance also been investigated. For this purposes, the data was
collected using questionnaire-based survey among Malaysian manufacturing firms.
Using the descriptive and correlation test, the data was analyzed. From the results, it
is showing that the manufacturing performance through the implementation of green
supply chain management has a positive relationship to environmental action and
customer activities.
This paper has evaluated the spatial growth of Bauchi Metropolis from 1976 to 2015
through the application of Remote Sensing and GIS techniques. Various satellite
imageries of the metropolis (Landsat MSS of 1976, TM of 1986, 1996 and ETM+ of 2006
and 2015) were integrated; processed and classified using ERDAS imagine 9.1. The
results showed an increase in area from 11.68km2
in 1976 to 12.51km2
in 1986 to
32.44km2 in 1996, to 49.66km2
in 2006 and finally to 89.23km2 in 2015. It is
recommended that government should provide the required capacities for the use of
Remote Sensing and GIS in planning for the growth of the town.
The utilization of parallelogram structure in a small-sized humanoid robot consists of two parallel platforms that are linked serially in each leg. The thigh and shank of each leg consists of two servomotors as actuator and linked in parallel platform. By using parallel mechanism in leg structure, foot sole surface is always parallel to the walking surface at any point. Even it looks unnatural to human-like walking motion, the expected result is the robot can maintain it posture while walking and at the point foot sole touch the walking surface, unnecessary vibrates can be modulated at the certain level to remain its balance. The effectiveness and the performance of the proposed parallel platforms are experimented by using zero moment point (ZMP) method by taking various scenario data from pressure sensors attached at the footsole. Planned walking gait is introduced to be identical in terms of foot steps length and width of each leg swing. As the results, in terms of load in each actuator, required torque at servomotors can be reduced because two servomotors are used simultaneously in one parallel system. Stable walking gait can be predicted as the quantity of error falls within the error ranges from the published walking gait patterns.
Value management explicitly targets to optimize value by providing necessary
functions at the least cost without sacrificing quality and performance. However, the
activities/methods of this technique in emerging economies are here and there
related to informal methodology. Therefore, the occurrence of these activities in an
evolving economy requires investigation. The exploration of the extent to which the
measured variables influenced the latent factors informed the need for this study.
Data was retrieved via self-administered questionnaire from 344 registered and
practicing construction professionals in Nigeria. The data was analyzed using SPSS for
descriptive analysis and Structural Equation Modelling (SEM). Kaiser-Meyer-Olkin
measure of sampling adequacy revealed that the internal consistency of the
developed research instrument was appropriate. Confirmatory factor analysis
indicates satisfactory goodness of fit among acknowledged determinants of the
model. Furthermore, the study revealed three (3) phases of the activities/methods of
value management in the Nigerian construction industry which include: information,
information/function analysis, and creativity/evaluation/development/presentation
phases. This means that value management activities and methods are being
practiced in Nigeria, however not as per the typical methodology or standard. The
need to carry out the practice according to the formal value management
methodology is therefore recommended.