Tropical greenhouses require active evaporative cooling system such as pad-and-fan to ensure a suitable microclimate for crop production. Excess heat causes indoor temperature to become hotter than desired resulting in detrimental effects to crop growth and production. Solar radiation intensity and outside temperature affect temperature and relative humidity level inside a greenhouse, while wide gradients in temperature and relative humidity can cause problems related to crop growth and production uniformity. A 300 m2 greenhouse, equipped with evaporative pad and four exhaust fans at each end walls, was used in the study. Horizontal and vertical profiles of the temperature and relative humidity inside the greenhouse were investigated. Results showed that temperature increased from evaporative pad area to exhaust fans area in a horizontal plane, while relative humidity showed an inverse pattern from temperature. In the vertical plane, temperature increased, while relative humidity decreased from lower level to the upper level. ANOVA results showed that in overall, temperature and relative humidity inside the greenhouse were uniform as there was no significant difference at 95% confidence interval. Thus, it was concluded that greenhouse cooling system by evaporative pad and exhaust fans are suitable for application in a tropical country such as Malaysia.
Liberica coffee is the most important coffee species grown in Malaysia. However, there is little or no research at all conducted on coffee berries and green coffee beans since the plant itself is a low income crop in Malaysia. Therefore, research on Malaysian Liberica coffee can help to increase the knowledge of coffee farmers and coffee manufacturers in the processing and handling of the coffee. Physical properties of Liberica coffee berries and beans were investigated the current study. The properties investigated include the size, mass, density, coefficient of friction, angle of repose, fracture force and colour. In comparison to Arabica and Robusta coffee, Liberica coffee has the biggest size, mass, true density and fracture force values but were lower in bulk density in both berries and beans. The Liberica berries and beans were found to be orange-ish and yellowish colour respectively. Angle of repose was low and approximately similar in berries and beans while jute fibre gave the highest friction to both Liberica berries and beans.
This case series reports four patients who used religion and spirituality to relieve symptoms of post traumatic stress disorder (PTSD) following motor vehicle accidents. Their symptoms subsided after a few weeks and the recovery is sustained after one month. This demonstrates that in a country where psychological help is still scarce and religion is central to its culture, intervention based on spirituality and religion can be used as an alternative early intervention to relieve symptoms of PTSD and hence protects them from developing the condition.
Introduction: A prebiotic such as inulin is a well-known functional plant food ingredient. It is capable of stimulating growth of beneficial bifidobacteria in the intestine thus protecting against intestinal infections, preventing constipation, increasing mineral absorption, reducing the incidence of colon cancer, and producing B vitamins. Inulin added to food therefore has to be stable during food processing especially against heat treatment, low pH and Maillard reaction. Methods: Newly developed dark chocolate, DC-1, containing inulin (replacing sugar component) as an added value, was stored at 18oC, 60% relative humidity and 25oC, 80% relative humidity (RH) to determine shelf life stability compared to control dark chocolate, DC-0 (with high content of sugar). Sensory evaluation (quantitative descriptive analysis), water activity (aw), microbiological content and presence of inulin after storage of the prebiotic chocolate under both conditions were evaluated to determine shelf life. Results: The DC-1 chocolate had at least 12 months of shelf life at 18oC, 60% RH with better acceptance than DC-0; moreover, it did not experience microbiological and inulin content changes. At 25oC, 80% RH, the growth of Aspergillus sp. was observed on the surface of both DC-0 and DC-1 with aw >0.50 after a 2-month storage. Conclusion: Shelf life stability of DC-1 is almost similar to DC-0.
The process of etching is the most crucial part of the work of manufacturing printed circuit boards (PCB). In the etching process by nitric acid, a spent etching waste solution of composition 250 g/L HNO3, 30-40 g/L Cu, 30-40 g/L Sn, 30-40 g/L Pb and 20-25 g/L Fe is produced. High metal concentrations in the spent etching waste solution make it a viable candidate for the recovery of metals. Recovery of metals from spent etching waste solution is a significant concern as the recent growth in production of printed circuit boards has generated a drastic increase of spent etching waste solution each year. This study concerns itself with the recovery of metals from spent etching waste. In this study a dilution was made in order to increase the pH of the solution as spent etching waste solution has high acidity, and the electrowinning method was performed to recover metals from the spent etching waste solution. Glassy carbon and platinum were used as cathode and anode in order to investigate the electrodeposition of metals and cyclic voltammetry investigation suggests that the deposition of metals on glassy carbon electrodes occurs at four different overpotentials mainly at -0.15 V, -0.35 V, -0.45 V and -0.75 V. Microscopy observation demonstrates that there is a deposition of metals by applying the potentials in a set of current-time transient study for a duration of 60 seconds and the metals recovered formed as aggregates.
Transition metals play an important role in the growth of carbon nanotubes (CNTs). Series of unsupported hybrid catalysts consisting of Ni:Cu, Ni:Cr, and Ni:Mn doped with Nd catalyst, respectively were synthesized by impregnation method. The catalytic performance of the catalyst for the production of CNTs was measured in the pyrolysis process of hydrocarbon source by catalytic chemical vapour deposition method. Acetylene gas was used as the source of carbon in the pyrolysis process. The decomposition of acetylene was carried out at 700ºC. The bulk properties of the catalysts were investigated by X-ray diffraction. Field emission scanning electron microscopy and thermal analysis were used to observe the morphology and thermal stability of the as-synthesized CNTs, respectively. Hybrid catalyst of Ni:Mn/Nd and Ni:Cr/Nd in 3:1 atomic ratio gave high percentage of carbon yield which was assigned for the high production of CNTs with the mass of yield 18 times greater than the initial mass of the catalyst used.
Academic and corporate interest in sustainable product and process development has risen considerably
in recent years. This can be seen by the number of papers published and in particular by special issued of journals. This paper reports the results of a review of published peer-reviewed literature from 1987 to 2012 to provide an up-to-date picture of sustainability and sustainable assessment. A structured methodology is followed to narrow down the search from around 3500 papers to 111. A variety of different sustainability assessment methodologies are reviewed in two classified research areas: product sustainability assessment and process sustainability assessment. In presenting a detailed taxonomy of product and process sustainability assessment methods, the paper also outlines the advantages and weaknesses of the sustainability assessment methods. The review sheds light on the weak points of current research in this area. The paper also highlights several key issues which have to be taken into account in attempting to develop a product or process sustainability assessment research paradigm for future applications in manufacturing systems.
Heuristic Evaluation (HE) is used as a basis in developing a new technique to evaluate usability or
educational computer games known as Playability Heuristic Evaluation for Educational Computer Game (PHEG). PHEG was developed to identify usability problems that accommodate five heuristics, namely, interface, educational elements, content, playability and multimedia. In HE process, usability problems are rated based on severity score and this is followed by presentation of a mean value. The mean value is used to determine the level of usability problems; however, in some cases, this value may not accurate because it will ignore the most critical problems found in a specific part. In developing PHEG, a new quantitative approach was proposed in analyzing usability problems data. Numbers of sub-heuristics for each heuristic involved were taken into account in calculating percentage for each heuristic. Functions to calculate critical problems were also introduced. Evaluation for one educational game that was still in development process was conducted and the results showed that most of the critical problems were found in educational elements and content heuristics (57.14%), while the least usability problems were found in playability heuristic. In particular, the mean value in this analysis can be used as an indicator in identifying critical problems for educational computer games.
The most commonly used techniques of alpha and gamma spectrometry were performed to measure
210Pb activity in marine sediment core as a comparison. Alpha analytical technique measured the
activity of 210Pb from it’s in-grow grand-daughter 210Po after a chemical separation, assuming
radioactive equilibrium between the two radionuclides. Meanwhile, gamma analysis technique
allows direct measurement, non-destructive and no preliminary chemical separation. Through the
comparison, it is found that both alpha and gamma analysis techniques were slightly difference.
Overall, the results from alpha analytical technique were basically higher than those from the
gamma analytical techniques. Some logical argument had been discussed to explain this situation.
In routine analysis, the analytical technique used should be chosen carefully based on advantages
and disadvantages of the each technique and analysis requirements. Therefore, it is recommended to
determine exactly the needs and purpose of analysis and to know the sample history before decide
the appropriate analytical technique
The detection of tetrodotoxin (TTX) and saxitoxin (STX) in dried salted yellow puffer fish (Xenopterus naritus) eggs bought from Satok Market, Kuching, Sarawak was carried out by mouse bioassay method. The amount of TTX and STX detected in the samples ranged from 95.6-195.5 Mouse Unit (MU)/g and 1.72-3.58 MU/g respectively. The results indicate that the dried salted eggs samples were found to contain TTX 9-20 times above the regulatory limit for human consumption (10 MU/g). Although detected, the amount of STX in salted eggs extract was slightly below the accepted threshold limit (4 MU/g). The local public in Sarawak should be educated on the potential danger of consuming dried salted puffer fish eggs in addition to the current warnings on puffer fish.
This study explores the relationship between the total exports and total imports of the food industry in Sarawak from 1961 through 2007. We examined the sample period of the pre-1997 crisis (1961-1996) and the full sample period (1961-2007) to investigate disparities for pre-crisis sample. Analysis was carried out using standard econometric procedure and Dynamic OLS estimation for the annual observations of the two sample period. This study’s major findings are: (1) long run relationships were detected in the full sample period whereas they were absent in the pre-crisis period; (2) imbalances in food were found to be weakly sustainable for the full sample; (3) for every ringgit increase in imports, exports rose by RM0.803 for the full sample, revealing that imports grew at a rate faster than exports. This finding suggests that reducing the size of imports may improve imbalances in Sarawak’s food industry.
Bacillus cereus is a soil inhabitant gram positive bacterium, and is known to cause severe food poisoning. The objective of this study was to isolate and identify the presence of Bacillus cereus s.l. from selected ready to eat cereals purchased randomly from local supermarkets in Kuching and Kota Samarahan, Sarawak. The result showed that four of the 30 food samples were detected to be contaminated by B. cereus s.l. . Our findings suggested that it is important for the public to be aware of the safety of RTE cereals consumption, as it is possible that B. cereus s.l. may be present in high count number and pose hazardous health effects to the consumers.
Salmonella has caused foodborne illnesses globally and it has been a rising threat on fresh produce. The objective of this study was to determine the prevalence and concentration of Salmonella spp., Salmonella Typhi and Salmonella Typhimurium in freshly prepared fruit juice sold at hawker stalls. Analysis was conducted by employing most probable number-polymerase chain reaction (MPN-PCR). A total of 50 freshly prepared fruit juices were examined and the prevalence of Salmonella spp., Salmonella Typhi and Salmonella Typhimurium in the fruit juices were 34%, 20% and 10%, respectively, with an estimated microbial load varying from 0 to 42 MPN/g. Of the five different fruits, carrot juice had the highest prevalence of Salmonella spp. (60%) and Salmonella Typhi (40%). However, Salmonella Typhimurium was detected in apple (30%), orange (10%) and starfruit juice (10%). Factors contributing to the presence of Salmonella were cross-contamination and poor sanitation practice. Besides, negligence on temperature and storage time also led to the growth of Salmonella. Proper monitoring and risk assessment are needed in order to establish control measures to ensure the quality and safety of fruit juices in Malaysia.
This study aimed to determine the biofilm formation ability by Salmonella Typhi on cucumber, mango and guava surface, as well as to determine the relationship between time contact and biofilm formation. Crystal violet assay was performed to quantify the biofilm formation based on the value of optical density at 570 nm of the destaining crystal violet at the specific interval time. The result showed that the attachment of the bacterial cells on the fresh produce surface increased with the contact time. The readings of OD570at time 12 h for cucumber, mango and guava surfaces were 0.824, 0.683 and 0.598, respectively, indicating that the biofilm formation by Salmonella Typhi on different fresh produce surface varied with time. Since the result showed that Salmonella Typhi formed biofilm on fresh produce surfaces, hygienic practice from farm to fork including handling, processing, distribution and storage of the fresh produce should be of concern.
Objective: This case report highlights on the challenges in the management of people with bipolar disorder. Method: We report a case of 36 year-old lady living with this disorder and her journey in a search for a meaningful life. Result: Adherence to treatment is a major determinant of outcome in bipolar patient like Ms WMY. Poor insight, negative attitudes towards treatment and poor understanding of medications and the illness can all lead to reduced adherence. Conclusion: This case demonstrates on how poverty of insight, poor social support, on-going stressors with significant life events and poor compliance to treatment create a series of stumbling blocks in recovery from bipolar disorder.
Chili shrimp paste (CSP) is a favorite condiment in Southeast Asia. Microbial spoilage makes CSP unsuitable for consumption within several days. Thermal treatment was applied to produce microbiologically safe CSP. The effect of heating process on physicochemical and sensorial properties of CSP was studied. Heating at the optimum condition (21.6 min, 80 ˚C) has been shown effective and reliable in controlling microorganisms in CSP. Complete inactivation of peroxidase activities could not be accomplished at the optimal point, and significant reduction of the total phenolic and capsaicinoids contents was observed. Sensorial evaluation indicated that thermally processed CSP was less preferred by panelists when compared to freshly prepared samples of dry weight respectively.
The objective of this research is recovery of squalene from palm fatty acid distillate (PFAD) using supercritical fluid extraction (SFE). The extraction process was performed by using the SFE and recovered squalene was analyzed from total lipid extracts using HPLC. A central composite design was used to study the effect of SFE variables namely pressure (X₁) from 200 to 400 bar and temperature (X₂) from 40 to 60⁰C on the total lipid extracts (Y₁) and squalene concentration (Y₂) and optimize the SFE conditions. The nonlinear regression equations were significantly (p < 0.05) fitted for both responses with high R₂ (> 0.965), which had no indication of lack of fit. The results indicated that a combined pressure (200 bar) and temperature (50⁰C) was predicted to provide the optimum region in terms of total lipid extracts (13.84 ± 0.52%) and squalene concentration (418.31 ± 18.40 ppm) studied.
Studies have been carried out to determine the chemical (soluble solid content) and physical (firmness) parameters of locally grown Cavendish banana by near infrared (NIR) spectroscopy. NIR spectra in the wavelength region of 680-2500 nm were obtained from a total of 408 Cavendish bananas of different ripeness indices. Chemometrics using multiple linear regression (MLR) was applied to develop calibration models for prediction of firmness and soluble solid content (SSC) of Cavendish banana. Results showed that NIR spectroscopy had the feasibility for non-destructive determination of the quality of Cavendish banana. The coefficient of determination (R2) for firmness and SSC calibration models at different ripeness indices ranged from 0.78 to 0.86 and 0.75 to 0.96, respectively. The calibration models were validated using independent sets of data and prediction models developed with the root mean square error of prediction (RMSEP) ranged from 0.01 to 0.26 kgf and 0.039 to 0.788 Brix for firmness and SSC, respectively. The multi-index models showed considerable robustness but higher prediction error with RMSEP of 0.336 kgf for firmness and 0.937% Brix for SSC compared to index specific model.
Nuclear grade (high-purity) graphite for fuel element and moderator material in Advanced Gas
Cooling Reactors (AGR) displays large scatter in strength and a non-linear stress-strain response from the damage accumulation. These responses can be characterized as quasi-brittle behaviour. Current assessments of fracture in core graphite components are based on the linear elastic approximation and thus represent a major assumption. The quasi-brittle behaviour gives challenge to assess the real nuclear graphite component. The selected test method would help to bridge the gap between microscale to macro-scale in real reactor component. The small scale tests presented here can contribute some statistical data to manifests the failure in real component. The evaluation and choice of different solution design of biaxial test will be discussed in this paper. The ball on-three ball test method was used for assessment test follows by numerous of analytical method. The results shown that biaxial strength of the EY9 grade graphite depends on the method used for evaluation. Some of the analytical methods use to calculate biaxial strength were found not to be valid and therefore should not be used to assess the mechanical properties of nuclear graphite.
Detection and analysis of resin is particularly significant since the commercial value of agarwood is related to the quantity of resins that are present. This article explores the potential of a scanning electron microscope in combination with new non-destructive 3D visualization technique, X-ray micro-computed tomography, as imaging tools to visualize micro-structure resin in agarwood. These techniques were used to compare two samples of agarwood chips: high grade and low grade. From the results, it can be concluded that a wood cell filled with resin deposit have a higher attenuation. It can be shown that the combination of scanning electron microscopy and micro-CT can offer high resolution images concerning the localization and structure of resin inside Agarwood. While the second allows the 3D investigation of internal structure of agarwood, the first technique can provide details 2D morphological information. These imaging techniques, although sophisticated can be used for standard development especially in grading of agarwoodlbr commercial activities.