Anochetus maryatiae, a new species of Formicidae from the subfamily Ponerinae, tribe Ponerini from Ulu Gombak is described and illustrated. This ant genus was last studied in Malaysia by Brown in 1978. Observations were made on morphometric characters which included parameter measurements of total length, head length, head width, mandible length, scape length, antenna length, maximum eye length, oculomandibular distance, funicular length segment 1 to 4, pronotum width, propodeum height, petiole length, petiole height, dorsal petiole width, cephalix index and mandibular index. It was followed by a brief diagnosis, description of morphological structure, microsculpture, pilosity and discussion. Although it has resemblance with Anochetus tua, it could be easily distinguished from other species in having reticulate pronotum. This is the only species from Malaysia with such microsculpture on the pronotum. In addition to that, A. maryatie varies with A. tua in having smaller total length, less than 7.5 mm and lighter colour.
The purpose of this study was to determine the effects of 100% feedback frequencies, 65% of feedback frequencies and bandwidth feedback on overhand throwing skill among children and motivation of the children during practices. 60 of female students from range of aged 10 to 11 years old are participated in this study (age: M=10.53 years/SD=.503, weight: M=29.11/SD3.08, height=126.68/3.04). All participants practiced 60 trials of overhand throwing accuracy task and the motivation of the participant had been measured by using Intrinsic Motivation Inventory Questionnaire (IMI) (r=0.59). Participants were randomly assigned into three group 100% feedback, 65% feedback and bandwidth feedback groups. Learning was inferred from the performance on the delayed (24-hour) retention. To analyze the data, we use mixed-between ANOVA for practice phases, One Way ANOVA for retention test and correlation analysis to measure the relationship between feedback frequencies and motivation. There was no significant result between group (F (2, 57) =.286, p= .752) during practices, there is a significant difference on retention test phase (p
Paper recycling plants usually buy their raw material from suppliers. More than often, bulk used paper supplied to the plant contains some significant quantity of water in its internal voids. It may be included intentionally or unintentionally. The price of used paper depends on its weight, thus adding water will help to increase weight and consequently increase the price. In this way, plant owner who purchase the used paper suffers a significant of financial lost. The objectives of our experiment are to establish a calibration curve that correlate between the amount of neutron backscattered and water content, and finally to develop a correction factor that need to be introduced to the measured values of water content. A fast neutron source (Am-Be 241) and a portable backscattering neutron detector were used for water measurement. The experiments were carried out by measuring neutron backscattering from used paper that has been added with different amount of water. As a result, a neutron calibration curve that provides a correlation between neutron backscattering and water content was established.
In hilly forest area, aligning forest roads is the key towards an effective and sustainable forest management. Constraints in forest road planning are mainly due to environmental factors and topographical conditions. Selecting the criteria for planning forest road and setting the priorities, ranking them for environmental sustainability and reduce cost in road construction is important. Different criteria are required at different forest area since the quantifiable relationship between cause and effect to meet the goal are not comprehensively prioritized. In order to solve the problem, the relative importance factor from multi criteria basis, namely Analytic Hierarchy Process (AHP) was applied. Therefore, the objective of this study was to develop priorities and rank a selected criterion for planning forest road in hilly area using AHP approach. Four criteria had been identified to meet the goal of suitable forest road allocation namely slope, river crossing, elevation and existing forest road. The suitable criteria selected were sorted with weight in ranking order to minimize the impact of timber harvesting. Our results showed that the priorities and ranking were as follows; slope (w = 0.558), followed by river crossing (w = 0.303), elevation (w = 0.095) and lastly existing forest road (w = 0.044), respectively. Therefore, the relative preference factor developed in this study can be used by the Forestry Department for formulating suitable forest road allocation in hilly area simultaneously to be integrated with geographic information system technology.
The issue of age difference in hospital admission should be given special attention since it affects the structure of hospital care and treatments. Patients of different age groups should be given different priority in service provision. Due to crucial time and limited resources, healthcare managers need to make wise decisions in identifying priorities in age of admission. This paper aimed to propose a construction of a daily composite hospital admission index (CHAI) as an indicator that captures relevant information about the overall performance of hospital admission over time. It involves five different age groups of total patients admitted to seven major public hospitals in the Klang Valley, Malaysia for respiratory and cardiovascular diseases for a period of three years, 2008 - 2010. The criteria weights were predetermined by aggregating the subjective weight based on rank ordered centroid (ROC) method and objective weight based on entropy - kernel method. The highest and lowest scores of CHAI were marked, while the groups of patients were prioritized according to the criteria weight ranking orders.
The importance of the performance of concrete cannot be neglected since it is the early indicator of its physical and mechanical properties. It became more important when material with different physical properties than normal material such as rubber tire was used as concrete constituent. This paper presented apart of research result conducted on mortar and concrete with crumb rubber. Crumb rubber was replaced at 10%, 15% and 20% as sand replacement by volume. In addition, ordinary Portland cement was added to silica fume at 10% and 15% by weight. The properties measured in this study are air content and workability test. As for workability, superplasticizers were constantly used at 1% dosage for all mortar mixture, and 0.5% to 0.7% for concrete mixture. The air content was set at 4% to 6% and mortar flow test was conducted on a steel plate, shocked 15 times in 15 seconds and concrete slump test was carried out using slump cone equipment. Pressure method was used to measure air content. All mixes were done in a controlled room temperature. Results showed that when CR was added in the mixture segregation was observed in mortar requiring a high dose of superplasticizer to be added to improve the workability while air-modifying agent was used to reduce the mortar air content. In concrete mixture, low dosage of superplasticizers was required for workability and air-entrained agent was injected into the mixture to increase the air content between 4%-6%.
It has been observed previously that the physical behaviors of Schmidt number (Sc) and Prandtl number (Pr) of an energy-conserving dissipative particle dynamics (eDPD) fluid can be reproduced by the temperature-dependent weight function appearing in the dissipative force term. In this paper, we proposed a simple and systematic method to develop the temperature-dependent weight function in order to better reproduce the physical fluid properties. The method was then used to study a variety of phase-change problems involving solidification. The concept of the "mushy" eDPD particle was introduced in order to better capture the temperature profile in the vicinity of the solid-liquid interface, particularly for the case involving high thermal conductivity ratio. Meanwhile, a way to implement the constant temperature boundary condition at the wall was presented. The numerical solutions of one- and two-dimensional solidification problems were then compared with the analytical solutions and/or experimental results and the agreements were promising.
This study investigated the dry and aqueous erosion of mild steel using electrochemical and dry sand impact techniques. In dry sand impact experiments, mild steel was eroded with 45 μm and 150 μm sand particles. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and micro-hardness techniques were used to elaborate the surface morphology of the eroded samples. The results revealed significant change in morphology of the eroded samples. In-depth analysis showed that although the metal erosion due to larger particles was significantly higher, the fines also notably damaged the metal surface. The surface damages were appreciably reduced with decrease in impact angle of the accelerated particles. The maximum damages were observed at an impact angle of 90°. The hardness of the samples treated with 45 μm and 150 μm sand remained in the range of 88.34 to 102.31 VHN and 87.7 to 97.55 VHN, respectively. In electrochemical experiments, a triple electrode probe was added into the metal treatment process. The linear polarization resistance (LPR) measurements were performed in slurries having 5% (by weight) of sand particles. LPR of the samples treated with 45 μm and 150 μm sand slurries was calculated about 949 Ω.cm(2) and 809 Ω.cm(2), respectively.
Samples of Y-Ba-Cu-O superconductor with nominal compositions of YBa2Cu3O7-d + x (weight %) Y2O3 (x = 0 - 15) were prepared by solid state reaction method using the Y2Cu2O5 and BaCuO2 precursors as the starting reagents. The X-ray diffraction (XRD) diffractograms for the doped samples (x> 0) show an additional non-superconducting Y2BaCuO5 (211) phase. The scanning electron microscope (SEM) micrographs show that the smaller Y2BaCuO5 grains are precipitated on the surface of the larger YBa2Cu3O7-d (YBCO) crystals. The grain size of the YBCO decreases with increasing yttria. The superconducting zero resistivity critical temperature (Tco) of the doped samples is very close to the Tco of the YBCO for x < 5, but it seems to be significantly decreasing for larger x. The transport critical current density (J) for x < 5 is enhanced due to magnetic flux pinning process by the 211 phase. However, Jc decreased for larger x due to the increase of weak links at the grain boundaries of the YBCO phase.
Sampel superkonduktor Y-Ba-Cu-O dengan komposisi nominal YBa2Cu3O7-d + x (% berat) Y2O3 (x = 0 -15) disediakan dengan kaedah tindakbalas keadaan pepejal menggunakan bahan pelopor Y2Cu2O5 dan BaCuO2 Difraktogram pembelauan sinar-X (XRD) bagi sampel yang didop (x > 0) menunjukkan wujudnya fasa tak mensuperkonduksi Y2BaCuO5 (211). Mikrograf mikroskop imbasan elektron (SEM) menunjukkan bahawa butiran Y2BaCuO5 yang lebih kecil itu termendap di atas permukaan hablur YBa2Cu3O7-d yang lebih besar. Saiz hablur YBCO mengecil dengan peningkatan yittria. Suhu genting kerintangan sifar (Tc) bagi sampel yang didop adalah hampir dengan Tco bagi YBCO untuk x<5, tetapi menurun dengan agak cepat untuk x yang lebih besar. Ketumpatan arus genting angkutan (J) untuk x < 5 meningkat jika dibandingkan dengan YBCO disebabkan oleh proses kepinan fluks magnet oleh fasa 211. Walau bagaimanapun, Jc menurun untuk x yang lebih tinggi kerana meningkatnya hubungan lemah pada sempadan butiran fasa YBCO.
Analyses of conventional morphometric, meristic and truss morphometric were performed on two
species of Pangasiid catfish, Pangasius pangasius and P. nasutus. The purpose is to find characters that help in differentiating these two species to avoid confusion among fish farmers. Three morphometric approaches (conventional, meristic and truss morphometric) were employed to identify the morphological differences. Conventional morphometric suggested eye diameter, body width, body depth, dorsal fin base length and barbells as characters that have significant differences (P< 0.05) between the species, hence making them as potential diagnostic markers. Truss morphometric analyses approved that P. nasutus have larger dorsal fin base length as suggested by conventional morphometry data. Meristic analysis showed significant difference (P
Handgrip strength is useful for screening the nutritional status of adult population as it is strongly associated with physical disabilities and mortality. Therefore, we aimed to determine the predictors of handgrip strength among adults of a rural community in Malaysia using a cross-sectional study design with multistage sampling. All adults aged 30 years and older from 1250 households were invited to our study. Structured questionnaire on sociodemographic characteristics, medical history, occupation history, lifestyle practices, and measurements, including anthropometry and handgrip strength were taken. There were 2199 respondents with 55.2% females and majority were of Malay ethnicity. Their mean (standard deviation) age was 53.4 (13.2) years. The response rate for handgrip strength was 94.2%. Females had significantly lower handgrip strength than males (P < .05). In the multiple linear regression models, significant predictors of handgrip strength for males were age, height, job groups, and diabetes, while for females, the significant predictors were age, weight, height, and diabetes.
Body Mass Index (BMI) is the most established anthropometric indicator used for assessment of nutritional status. Other anthropometric indicators which are related closely to BMI are waist hip ratio (WHR) and waist circumference. In this paper, receiver operating characteristics (ROC) curves were constructed to assess the value of waist circumference and waist hip ratio as a screening measure for the need of weight management using BMI as the reference test. Sensitivity and specificity were calculated at several cut-offs. The areas under the ROC curve calculated by comparing waist circumference with BMI were high (0.70 - 0.86) while the areas calculated for WHR were low (0.46 - 0.67). Sensitivities of 0.745 and 0.800 were observed at cut-off points of waist circumference at 90cm and 80cm for males and females respectively, while the false positive rates were 0.233 for males and 0.250 for females. These cut-off points could be considered as a fair trade-off. Therefore it is concluded that waist circumference performed better than WHR as a screening test. It is indicative that waist circumference could be used as a tool in raising awareness of weight management in this population.
Body measurement is the first process that must be encountered before any
custom-made compression garment can be designed. The current practice of
obtaining the measurement is by traditional methods using tools like
measuring tape. However, this method is considered to be time-consuming
and usually not accurate. The most popular solution to the problem is by using
non-contact measurement. The development of the 3D whole body scanner
has made non-contact body measurement become a reality due to its capacity
to capture a vast amount of information. However, the cost to buy the whole
body scanner is quite expensive. Moreover, their sizes are also bulky which
make them less portable. Thus, a handheld body scanner provides a solution
to the problem. Despite that, current handheld scanner only provide image
and visualization aspect, but not the measurement aspect. This paper reports
the development of a method to acquire body data from a 3D handheld
scanner. In this new method, the point cloud of a body part was collected
using the handheld scanner. Then, the data was transformed into point
coordinates. Several processes were developed to filter the number of points
to allow for faster processing time and increasing the measurement accuracy.
In the first process, only points at specific height/layers are selected. In the
second process, the remaining points are rearranged according to their height
and angle. In the last process, the number of points is further reduced. In this
process, the number of points per layer is limited to 72 points. Results show
that the method can be used to determine body measurement.
Background & Study Aim: The purpose of the current case study was to
describe the activity pattern of individual exponents during competitive fights
completed before and after six weeks circuit training programme. Material
& Methods: Thirteen and 16-year-old experimental (E13 and E16) and
control (C13 and C16) participants were paired and videoed with fighting
before and after 6-week training. Exponents were chosen based on their age,
maturation, weight, competitive standard (none had participated in an official
silat match), and initial fitness performance. All matches were converted into
.mpg files and analysed using the same procedure. The distribution of
outcomes was analysed and used as an index of performance for more
detailed analysis. Results: The E13 increased the frequency of kicking during
competition post-training, which is suggested to reflect transference of
improved fitness to competition. Both E13 and C13 improved the ability to
dodge their opponent attacks, likely reflecting a response to technical
coaching. The frequency of actions during competition generally decreased
for both older participants, suggesting limited fitness transference to
competition. All individuals demonstrated some meaningful improvements
in fitness following the intervention period. However, these responses did not
necessarily reflect the group finding. Conclusions: This was the first case
study to examine the changes in competitive fighting performance of four
young performers from experimental and control groups following a silatspecific
circuit training programme. Therefore, fitness gains together with
technical coaching may transfer to competition in younger exponents, while
alterations in strategy may have been more decisive in the older group. The
research has provided further insight of fitness development and trainability,
and also transference fitness into competitive performance in youth silat which may help to facilitate coaches of the demands and requirements of the
combat sport.
Otoliths, which can be used for the evaluation of relationships between the environment and organisms, are structures
consisting of calcium carbonate. The aim of this study was to realize the shape analysis. In addition, it is to detect the
characteristics of otolith biometrics in order to determine the relationship between the fish size of Engraulis encrasicolus
L. from the Black and Marmara Seas. The samples were obtained from the Black and Marmara Seas between December
2013 and February 2014. The relationships between the TL (Total length) and OL (Otolith length), TL and OB (Otolith
breadth), and TL and OW (Otolith weight) were determined using the linear regression equation. Form factor, roundness,
circularity and rectangularity were used for shape analyses. According to the data, there was no difference between
localities (p>0.05). Moreover, there was no difference between the left and right otoliths of the individuals sampled from
the same locality (p>0.05). According to the regression coefficient for relationships of TL-OL, TL-OB and TL-OW, otolith
length was identified as the best index for estimating fish length (r
2
>0.70). It showed that index values were statistically
different between two populations (p<0.001).
Two forms of Staurois that are differentiated by body size occur parapatrically in the Crocker Range, Sabah, Borneo. Analyses of a total of 1,499 bp of the mitochondrial cytochrome b, 12S rRNA, and 16S rRNA genes revealed that the two forms could be completely split genetically. The two forms could be also clearly differentiated morphologically, not only by snout-vent length but also by the relative sizes of snout, eye, and finger disk. Comparisons of the two forms with all known species of the genus revealed the large and small forms to be S. tuberilinguis and S. parvus, respectively. The latter species has long been synonymized with the former, but we here consider them to represent different species.
A total of 341 fertilized and 37 unfertilized oocytes from 63 intracytoplasmic sperm injection (ICSI) treatment cycles were included for retrospective assessment using the Embryoscope time-lapse video system. The second polar body (pb2) extrusion occurred at 2.9±0.1 h (range 0.70-10.15 h) relative to sperm injection. All oocytes reduced in size following sperm injection (p<0.05) with shrinkage ceasing after 2h in the unfertilized and at pb2 extrusion in the fertilized oocytes. Pb2 extrusion was significantly delayed for women aged >38 years compared to those <35 years (3.4±0.2 vs. 2.8±0.1, p<0.01) or 35-38 years (3.4±0.2 vs. 2.8±0.1, p<0.01), but timing was not related to the Day 3 morphological grades (1-4) of subsequent embryos (2.9±0.1, 2.9±0.1, 2.8±0.2 and 3.0±0.1; p>0.05 respectively). A shorter time of first cleavage division relative to either sperm injection or pb2 extrusion is associated with both top grade (AUC=0.596 or 0.601, p=0.006 or 0.004) and usable embryos (AUC=0.638 or 0.632, p=0.000 respectively) on Day 3. In summary, (i) pb2 of human oocytes extrudes at various times following sperm injection, (ii) the timing of pb2 extrusion is significantly delayed when female age >38 years, but not related to subsequent embryo development, (iii) all human oocytes reduce in size following sperm injection, (iv) completion of pb2 extrusion in the fertilized oocytes is a pivotal event in terminating shrinkage of the vitellus, and (v) time to first cleavage division either from sperm injection or pb2 extrusion is a significant predictive marker for embryo quality on Day 3.
The differential evolution algorithm has been widely applied on unmanned aerial vehicle (UAV) path planning. At present, four random tuning parameters exist for differential evolution algorithm, namely, population size, differential weight, crossover, and generation number. These tuning parameters are required, together with user setting on path and computational cost weightage. However, the optimum settings of these tuning parameters vary according to application. Instead of trial and error, this paper presents an optimization method of differential evolution algorithm for tuning the parameters of UAV path planning. The parameters that this research focuses on are population size, differential weight, crossover, and generation number. The developed algorithm enables the user to simply define the weightage desired between the path and computational cost to converge with the minimum generation required based on user requirement. In conclusion, the proposed optimization of tuning parameters in differential evolution algorithm for UAV path planning expedites and improves the final output path and computational cost.
The family Poritidae formerly included 6 genera: Alveopora, Goniopora, Machadoporites, Porites, Poritipora, and Stylaraea. Morphologically, the genera can be differentiated based on the number of tentacles, the number of septa and their arrangement, the length of the polyp column, and the diameter of the corallites. However, the phylogenetic relationships within and between the genera are unknown or contentious. On the one hand, Alveopora has been transferred to the Acroporidae recently because it was shown to be more closely related to this family than to the Poritidae by previous molecular studies. On the other hand, Goniopora is morphologically similar to 2 recently described genera, Machadoporites and Poritipora, particularly with regard to the number of septa (approximately 24), but they have not yet been investigated at the molecular level. In this study, we analyzed 93 samples from all 5 poritid genera and Alveopora using 2 genetic markers (the barcoding region of the mitochondrial COI and the ITS region of the nuclear rDNA) to investigate their phylogenetic relationships and to revise their taxonomy. The reconstructed molecular trees confirmed that Alveopora is genetically distant from all poritid genera but closely related to the family Acroporidae, whereas the other genera are genetically closely related. The molecular trees also revealed that Machadoporites and Poritipora were indistinguishable from Goniopora. However, Goniopora stutchburyi was genetically isolated from the other congeneric species and formed a sister group to Goniopora together with Porites and Stylaraea, thus suggesting that 24 septa could be an ancestral feature in the Poritidae. Based on these data, we move G. stutchburyi into a new genus, Bernardpora gen. nov., whereas Machadoporites and Poritipora are merged with Goniopora.