MyMedR

Displaying publications 21 - 40 of 109 in total

Abstract:

Sort:

Fatty acids and polyunsaturates in some common Malaysian cooking oils

Ng TK, Chong YH

Med J Malaysia, 1979 Jun;33(4):331-3.
PMID: 522745
Matched MeSH terms: Fatty Acids/analysis*
Fulltext Oxidative Stability of Refined Red Palm Olein under two Malaysian Storage Conditions

Ping BTY, Idris CAC, Maurad ZA

J Oleo Sci, 2020 Oct 07;69(10):1209-1218.
PMID: 32908090 DOI: 10.5650/jos.ess20045

Refined red palm olein (RPOo) is the first cooking oil that is a pro-Vitamin A source due to its high carotenoid concentration. The quality specifications from the manufacturers are usually applied to freshly produced oil. However, there is currently no information regarding the oxidative stability and phytonutrient content (Vitamin E and Carotene) for RPOo after prolonged storage time. The objective then is to study the effect of two local storage conditions and storage period(s) on the oxidative stability of RPOo. In this study, peroxide value (PV), p-anisidine value (AnV), induction period (IP), free fatty acid (FFA), and Vitamin E content were determined periodically for twelve months under local storage conditions (supermarket and kitchen). Carotene content, however, was determined only at initial and at the 12th month of storage time periods. It was found that there was an overall progressive but slow increase in PV and p-AnV. For PV, the storage effects were inconsistent. However, the effects were significant (p < 0.01) on the AnV throughout storage. At the end of the 12-months, for both storage conditions, the PV < 10 meq O2 g-1, the AnV < 10, the FFA < 0.2 % (palmitic acid), with a 30% drop in the total Vitamin E, and carotenoids content showed no significant drop (p < 0.01). The PV and AnV were also within Codex Alimentarius' recommended limits. Finally, the oxidative parameters showed that RPOo remains stable after year storage under the two simulated local storage conditions (the aforementioned supermarket and kitchen).

Matched MeSH terms: Fatty Acids/analysis
Sphingopyxis microcysteis sp. nov., a novel bioactive exopolysaccharides-bearing Sphingomonadaceae isolated from the Microcystis phycosphere

Zhang XL, Li GX, Ge YM, Iqbal NM, Yang X, Cui ZD, et al.

Antonie Van Leeuwenhoek, 2021 Jun;114(6):845-857.
PMID: 33770293 DOI: 10.1007/s10482-021-01563-1

During the study into the microbial biodiversity and bioactivity of the Microcystis phycosphere, a new yellow-pigmented, non-motile, rod-shaped bacterium containing polyhydroxybutyrate granules designated as strain Z10-6T was isolated from highly-toxic Microcystis aeruginosa Kützing M.TN-2. The new isolate produces active bioflocculating exopolysaccharides. Phylogenetic analysis based on 16S rRNA gene sequences indicated strain Z10-6T belongs to the genus Sphingopyxis with highest similarity to Sphingopyxis solisilvae R366T (98.86%), and the similarity to other Sphingopyxis members was less than 98.65%. However, both low values obtained by phylogenomic calculation of average nucleotide identity (ANI, 85.5%) and digital DNA-DNA hybridization (dDDH, 29.8%) separated the new species from its closest relative. The main polar lipids were sphingoglycolipid, phosphatidylethanolamine, phosphatidylglycerol, diphosphatidylglycerol, one unidentified glycolipid and one unidentified aminophospholipid. The predominant fatty acids were summed feature 8, C17:1ω6c, summed feature 3, C16:0, C18:1ω7c 11-methyl and C14:0 2-OH. The respiratory quinone was ubiqunone-10, with spermidine as the major polyamine. The genomic DNA G + C content was 64.8 mol%. Several biosynthesis pathways encoding for potential new bacterial bioactive metabolites were found in the genome of strain Z10-6T. The polyphasic analyses clearly distinguished strain Z10-6T from its closest phylogenetic neighbors. Thus, it represents a novel species of the genus Sphingopyxis, for which the name Sphingopyxis microcysteis sp. nov. is proposed. The type strain is Z10-6T (= CCTCC AB2017276T = KCTC 62492T).

Matched MeSH terms: Fatty Acids/analysis
Sulfitobacter alexandrii sp. nov., a new microalgae growth-promoting bacterium with exopolysaccharides bioflocculanting potential isolated from marine phycosphere

Yang Q, Ge YM, Iqbal NM, Yang X, Zhang XL

Antonie Van Leeuwenhoek, 2021 Jul;114(7):1091-1106.
PMID: 33895907 DOI: 10.1007/s10482-021-01580-0

Marine phycosphere harbors unique cross-kingdom associations with enormous ecological significance in aquatic ecosystems as well as relevance for algal biotechnology industry. During our investigating the microbial composition and bioactivity of marine phycosphere microbiota (PM), a novel lightly yellowish and versatile bacterium designated strain AM1-D1T was isolated from cultivable PM of marine dinoflagellate Alexandrium minutum amtk4 that produces high levels of paralytic shellfish poisoning toxins (PSTs). Strain AM1-D1T demonstrates notable bioflocculanting bioactivity with bacterial exopolysaccharides (EPS), and microalgae growth-promoting (MGP) potential toward its algal host. Phylogenetic analysis based on 16S rRNA gene sequences revealed that strain AM1-D1T was affiliated to the members of genus Sulfitobacter within the family Rhodobacteraceae, showing the highest sequence similarity of 97.9% with Sulfitobacter noctilucae NB-68T, and below 97.8% with other type strains. The complete genome of strain AM1-D1T consisted of a circular 3.84-Mb chromosome and five circular plasmids (185, 95, 15, 205 and 348 Kb, respectively) with the G+C content of 64.6%. Low values obtained by phylogenomic calculations on the average nucleotide identity (ANI, 77.2%), average amino acid identity (AAI, 74.7%) and digital DNA-DNA hybridization (dDDH, 18.6%) unequivocally separated strain AM1-D1T from its closest relative. The main polar lipids were identified as phosphatidylglycerol, phosphatidylethanolamine, phosphatidylcholine, diphosphatidylglycerol, one unidentified phospholipid and one unidentified lipid. The predominant fatty acids (> 10%) were C18:1 ω7c, C19:0 cyclo ω8c and C16:0. The respiratory quinone was Q-10. The genome of strain AM1-D1T was predicted to encode series of gene clusters responsible for sulfur oxidation (sox) and utilization of dissolved organic sulfur exometabolites from marine dinoflagellates, taurine (tau) and dimethylsulfoniopropionate (DMSP) (dmd), as well as supplementary vitamin B12 (cob), photosynthesis carotenoids (crt) which are pivotal components during algae-bacteria interactions. Based on the evidences by the polyphasic characterizations, strain AM1-D1T represents a novel species of the genus Sulfitobacter, for which the name Sulfitobacter alexandrii sp. nov. is proposed. The type strain is AM1-D1T (= CCTCC 2017277T = KCTC 62491T).

Matched MeSH terms: Fatty Acids/analysis
Optimization of Bleaching Parameters in Refining Process of Kenaf Seed Oil with a Central Composite Design Model

Chew SC, Tan CP, Nyam KL

J Food Sci, 2017 Jul;82(7):1622-1630.
PMID: 28608553 DOI: 10.1111/1750-3841.13758

Kenaf seed oil has been suggested to be used as nutritious edible oil due to its unique fatty acid composition and nutritional value. The objective of this study was to optimize the bleaching parameters of the chemical refining process for kenaf seed oil, namely concentration of bleaching earth (0.5 to 2.5% w/w), temperature (30 to 110 °C) and time (5 to 65 min) based on the responses of total oxidation value (TOTOX) and color reduction using response surface methodology. The results indicated that the corresponding response surface models were highly statistical significant (P < 0.0001) and sufficient to describe and predict TOTOX value and color reduction with R2 of 0.9713 and 0.9388, respectively. The optimal parameters in the bleaching stage of kenaf seed oil were: 1.5% w/w of the concentration of bleaching earth, temperature of 70 °C, and time of 40 min. These optimum parameters produced bleached kenaf seed oil with TOTOX value of 8.09 and color reduction of 32.95%. There were no significant differences (P > 0.05) between experimental and predicted values, indicating the adequacy of the fitted models.

Matched MeSH terms: Fatty Acids/analysis
Effect of rice bran oil addition on the oxidative degradation and fatty acid composition of soybean oil during heating

Ali MA, Islam MA, Othman NH, Noor AM, Ibrahim M

Acta Sci Pol Technol Aliment, 2020 1 14;18(4):427-438.
PMID: 31930793 DOI: 10.17306/J.AFS.0694

BACKGROUND: Rice bran oil (RBO) contains significant amounts of micronutrients (oryzanol, tocotrienol, tocopherol, phytosterols etc.) that impart a high resistance to thermal oxidation of the oil. The high oxidative stability of RBO can make it a preferred oil to improve the oxidative and flavor stabilities of other oils rich in PUFAs. In this study, the changes in the oxidative status and fatty acid composition in soybean oil (SO) blended with RBO under extreme thermal conditions were evaluated.
METHODS: The blends were prepared in a volume ratio of 10:90, 20:80, 40:60, and 60:40 (RBO:SO). The changes in the oxidative parameters and fatty acid composition of the samples during heating at frying temperature (170°C) were determined using analytical and instrumental methods. Oxidative alteration was also monitored by recording FTIR spectra of oil samples.
RESULTS: The increase in oxidative parameters (free fatty acid, color, specific extinctions, peroxide value, p-anisidine value, and thiobarbituric acid value) was greater in pure SO as compared to RBO or blend oils during heating. This indicates that the SO samples incorporated with RBO have the least degradation, while pure SO has the highest. Blending resulted in a lower level of polyunsaturated fatty acids (PUFA) with a higher level of saturated fatty acids (SFA) and monounsaturated fatty acids (MUFA). During heating, the relative content of PUFA decreased and that of SFA increased. However, the presence of RBO in SO slowed down the oxidative deterioration of PUFA. In FTIR, the peak intensities in SO were markedly changed in comparison with blend oils during heating. The reduction in the formation of oxidative products in SO during thermal treatment increased as the concentration of the RBO in SO increased; however, the levels of the protective effect of RBO did not increase steadily with an increase in its concentration.
CONCLUSIONS: During thermal treatment, the generation of hydroperoxides, their degradation and formation of secondary oxidative products as evaluated by oxidative indices, fatty acids and IR absorbances were lower in blend oils compared to pure SO. In conclusion, RBO can significantly retard the process of lipid peroxidation in SO during heating at frying temperature.

Matched MeSH terms: Fatty Acids/analysis*
Rapid alkali catalyzed transesterification of microalgae lipids to biodiesel using simultaneous cooling and microwave heating and its optimization

Chee Loong T, Idris A

Bioresour Technol, 2014 Dec;174:311-5.
PMID: 25443622 DOI: 10.1016/j.biortech.2014.10.015

Biodiesel with improved yield was produced from microalgae biomass under simultaneous cooling and microwave heating (SCMH). Nannochloropsis sp. and Tetraselmis sp. which were known to contain higher lipid species were used. The yield obtained using this novel technique was compared with the conventional heating (CH) and microwave heating (MWH) as the control method. The results revealed that the yields obtained using the novel SCMH were higher; Nannochloropsis sp. (83.33%) and Tetraselmis sp. (77.14%) than the control methods. Maximum yields were obtained using SCMH when the microwave was set at 50°C, 800W, 16h of reaction with simultaneous cooling at 15°C; and water content and lipid to methanol ratio in reaction mixture was kept to 0 and 1:12 respectively. GC analysis depicted that the biodiesel produced from this technique has lower carbon components (<19 C) and has both reasonable CN and IV reflecting good ignition and lubricating properties.

Matched MeSH terms: Fatty Acids/analysis
Fulltext The use of D-optimal mixture design in optimising okara soap formulation for stratum corneum application

Borhan FP, Abd Gani SS, Shamsuddin R

ScientificWorldJournal, 2014;2014:173979.
PMID: 25548777 DOI: 10.1155/2014/173979

Okara, soybean waste from tofu and soymilk production, was utilised as a natural antioxidant in soap formulation for stratum corneum application. D-optimal mixture design was employed to investigate the influence of the main compositions of okara soap containing different fatty acid and oils (virgin coconut oil A (24-28% w/w), olive oil B (15-20% w/w), palm oil C (6-10% w/w), castor oil D (15-20% w/w), cocoa butter E (6-10% w/w), and okara F (2-7% w/w)) by saponification process on the response hardness of the soap. The experimental data were utilized to carry out analysis of variance (ANOVA) and to develop a polynomial regression model for okara soap hardness in terms of the six design factors considered in this study. Results revealed that the best mixture was the formulation that included 26.537% A, 19.999% B, 9.998% C, 16.241% D, 7.633% E, and 7.000% F. The results proved that the difference in the level of fatty acid and oils in the formulation significantly affects the hardness of soap. Depending on the desirable level of those six variables, creation of okara based soap with desirable properties better than those of commercial ones is possible.

Matched MeSH terms: Fatty Acids/analysis
Evaluation of solvent system for the enzymatic synthesis of ethanol-based biodiesel from sludge palm oil (SPO)

Nasaruddin RR, Alam MZ, Jami MS

Bioresour Technol, 2014 Feb;154:155-61.
PMID: 24384322 DOI: 10.1016/j.biortech.2013.11.095

A green technology of biodiesel production focuses on the use of enzymes as the catalyst. In enzymatic biodiesel synthesis, suitable solvent system is very essential to reduce the inhibition effects of the solvent to the enzymes. This study produced ethanol-based biodiesel from a low-cost sludge palm oil (SPO) using locally-produced Candida cylindracea lipase from fermentation of palm oil mill effluent (POME) based medium. The optimum levels of ethanol-to-SPO molar ratio and enzyme loading were found to be 4:1 and 10 U/25 g of SPO respectively with 54.4% w/w SPO yield of biodiesel and 21.7% conversion of free fatty acid (FFA) into biodiesel. Addition of tert-butanol at 2:1 tert-butanol-to-SPO molar ratio into the ethanol-solvent system increased the yield of biodiesel to 71.6% w/w SPO and conversion of FFA into biodiesel to 28.8%. The SPO and ethanol have promising potential for the production of renewable biodiesel using enzymatic-catalyzed esterification and transesterification.

Matched MeSH terms: Fatty Acids/analysis
Differentiation of lard, chicken fat, beef fat and mutton fat by GCMS and EA-IRMS techniques

Ahmad Nizar NN, Nazrim Marikkar JM, Hashim DM

J Oleo Sci, 2013;62(7):459-64.
PMID: 23823911

A study was conducted to differentiate lard, chicken fat, beef fat and mutton fat using Gas Chromatography Mass Spectrometry (GC-MS) and Elemental Analyzer-Isotope Ratio Mass Spectrometry (EA-IRMS). The comparison of overall fatty acid data showed that lard and chicken fat share common characteristics by having palmitic, oleic and linoleic acid as major fatty acids while beef and mutton fats shared common characteristics by possessing palmitic, stearic and oleic acid as major fatty acids. The direct comparisons among the fatty acid data, therefore, may not be suitable for discrimination of different animal fats. When the fatty acid distributional data was subjected to Principle Component Analysis (PCA), it was demonstrated that stearic, oleic and linoleic acids as the most discriminating parameters in the clustering of animal fats into four subclasses. The bulk carbon analysis of animal fats using EA-IRMS showed that determination of the carbon isotope ratios (δ¹³C) would be a good indicator for discriminating lard, chicken fat, beef fat and mutton fat. This would lead to a faster and more efficient method to ascertain the source of origin of fats used in food products.

Matched MeSH terms: Fatty Acids/analysis*
Application of FTIR-ATR spectroscopy coupled with multivariate analysis for rapid estimation of butter adulteration

Fadzlillah NA, Rohman A, Ismail A, Mustafa S, Khatib A

J Oleo Sci, 2013;62(8):555-62.
PMID: 23985484

In dairy product sector, butter is one of the potential sources of fat soluble vitamins, namely vitamin A, D, E, K; consequently, butter is taken into account as high valuable price from other dairy products. This fact has attracted unscrupulous market players to blind butter with other animal fats to gain economic profit. Animal fats like mutton fat (MF) are potential to be mixed with butter due to the similarity in terms of fatty acid composition. This study focused on the application of FTIR-ATR spectroscopy in conjunction with chemometrics for classification and quantification of MF as adulterant in butter. The FTIR spectral region of 3910-710 cm⁻¹ was used for classification between butter and butter blended with MF at various concentrations with the aid of discriminant analysis (DA). DA is able to classify butter and adulterated butter without any mistakenly grouped. For quantitative analysis, partial least square (PLS) regression was used to develop a calibration model at the frequency regions of 3910-710 cm⁻¹. The equation obtained for the relationship between actual value of MF and FTIR predicted values of MF in PLS calibration model was y = 0.998x + 1.033, with the values of coefficient of determination (R²) and root mean square error of calibration are 0.998 and 0.046% (v/v), respectively. The PLS calibration model was subsequently used for the prediction of independent samples containing butter in the binary mixtures with MF. Using 9 principal components, root mean square error of prediction (RMSEP) is 1.68% (v/v). The results showed that FTIR spectroscopy can be used for the classification and quantification of MF in butter formulation for verification purposes.

Matched MeSH terms: Fatty Acids/analysis
Physico-chemical characterisation of the fat from red-skin rambutan (Nephellium lappaceum L.) seed

Manaf YN, Marikkar JM, Long K, Ghazali HM

J Oleo Sci, 2013;62(6):335-43.
PMID: 23728324

The seeds (6.9±0.2% by weight of fruit) of the red-skin rambutan (Nephelium lappaceum L.) contain a considerable amount of crude fat (38.0±4.36%) and thus, the aim of the study was to determine the physico-chemical properties of this fat for potential applications. The iodine and saponification values, and unsaponifiable matter and free fatty acid contents of the seed fat were 50.27 g I2/100g fat, 182.1 mg KOH/g fat, 0.8% and 2.1%, respectively. The fat is pale yellow with a Lovibond color index of 3.1Y+1.1R. The fatty acid profile indicates an almost equal proportion of saturated (49.1%) and unsaturated (50.9%) fatty acids, where oleic (42.0%) and arachidic (34.3%) acids were the most dominant fatty acids. It also contained small amounts of stearic (8.0%), palmitic (4.6%), gadoleic (5.9%), linoleic (2.2%), behenic (2.1%) palmitoleic (0.7%) myristic (0.1%) and erucic (0.1%) acids. HPLC analysis showed that the fat comprised mainly unknown triacylglycerols (TAG) with high retention times indicating they have higher carbon numbers compared with many vegetable oils. The fat has melting and cooling points of 44.2°C and -42.5°C, respectively, making it a semi-solid at room temperature. The solid content at 0°C was 53.5% and the fat melted completely at 40°C. z-Nose analysis showed that the presence of high levels of volatile compounds in red-skin rambutan seed and seed fat.

Matched MeSH terms: Fatty Acids/analysis
Biochemical characterisation during seed development of oil palm (Elaeis guineensis)

Kok SY, Namasivayam P, Ee GC, Ong-Abdullah M

J Plant Res, 2013 Jul;126(4):539-47.
PMID: 23575803 DOI: 10.1007/s10265-013-0560-8

Developmental biochemical information is a vital base for the elucidation of seed physiology and metabolism. However, no data regarding the biochemical profile of oil palm (Elaeis guineensis Jacq.) seed development has been reported thus far. In this study, the biochemical changes in the developing oil palm seed were investigated to study their developmental pattern. The biochemical composition found in the seed differed significantly among the developmental stages. During early seed development, the water, hexose (glucose and fructose), calcium and manganese contents were present in significantly high levels compared to the late developmental stage. Remarkable changes in the biochemical composition were observed at 10 weeks after anthesis (WAA): the dry weight and sucrose content increased significantly, whereas the water content and hexose content declined. The switch from a high to low hexose/sucrose ratio could be used to identify the onset of the maturation phase. At the late stage, dramatic water loss occurred, whereas the content of storage reserves increased progressively. Lauric acid was the most abundant fatty acid found in oil palm seed starting from 10 WAA.

Matched MeSH terms: Fatty Acids/analysis
Fulltext Quantitative determination of fatty acids in marine fish and shellfish from warm water of Straits of Malacca for nutraceutical purposes

Abd Aziz N, Azlan A, Ismail A, Mohd Alinafiah S, Razman MR

Biomed Res Int, 2013;2013:284329.
PMID: 23509703 DOI: 10.1155/2013/284329

This study was conducted to quantitatively determine the fatty acid contents of 20 species of marine fish and four species of shellfish from Straits of Malacca. Most samples contained fairly high amounts of polyunsaturated fatty acids (PUFAs), especially alpha-linolenic acid (ALA, C18:3 n3), eicosapentaenoic acid (EPA, C20:5 n3), and docosahexaenoic acid (DHA, C22:6 n3). Longtail shad, yellowstripe scad, and moonfish contained significantly higher (P < 0.05) amounts of eicosapentaenoic acid (EPA), docosahexaenoic acid (DHA), and alpha-linolenic acid (ALA), respectively. Meanwhile, fringescale sardinella, malabar red snapper, black pomfret, Japanese threadfin bream, giant seaperch, and sixbar grouper showed considerably high content (537.2-944.1 mg/100 g wet sample) of desirable omega-3 fatty acids. The polyunsaturated-fatty-acids/saturated-fatty-acids (P/S) ratios for most samples were higher than that of Menhaden oil (P/S = 0.58), a recommended PUFA supplement which may help to lower blood pressure. Yellowstripe scad (highest DHA, ω - 3/ω - 6 = 6.4, P/S = 1.7), moonfish (highest ALA, ω - 3/ω - 6 = 1.9, P/S = 1.0), and longtail shad (highest EPA, ω - 3/ω - 6 = 0.8, P/S = 0.4) were the samples with an outstandingly desirable overall composition of fatty acids. Overall, the marine fish and shellfish from the area contained good composition of fatty acids which offer health benefits and may be used for nutraceutical purposes in the future.

Matched MeSH terms: Fatty Acids/analysis*
Isolation and characterization of pullulan-degrading Anoxybacillus species isolated from Malaysian hot springs

Chai YY, Kahar UM, Md Salleh M, Md Illias R, Goh KM

Environ Technol, 2012 Jun;33(10-12):1231-8.
PMID: 22856294

Two thermophilic bacteria (SK3-4 and DT3-1) were isolated from the Sungai Klah (SK) and Dusun Tua (DT) hot springs in Malaysia. The cells from both strains were rod-shaped, stained Gram positive and formed endospores. The optimal growth of both strains was observed at 55 degrees C and pH 7. Strain DT3-1 exhibited a higher tolerance to chloramphenicol (100 microg ml(-1)) but showed a lower tolerance to sodium chloride (2%, w/v) compared to strain SK3-4. Phylogenetic analysis based on 16S rRNA gene sequences revealed that both strains belong to the genus Anoxybacillus. High concentrations of 15:0 iso in the fatty acid profiles support the conclusion that both strains belong to the genus Anoxybacillus and exhibit unique fatty acid compositions and percentages compared to other Anoxybacillus species. The DNA G + C contents were 42.0 mol% and 41.8 mol% for strains SK3-4 and DT3-1, respectively. Strains SK3-4 and DT3-1 were able to degrade pullulan and to produce maltotriose and glucose, respectively, as their main end products. Based on phenotypic and chemotaxonomic characteristics, 16S rRNA gene sequences, and the DNA G + C content, we propose that strains SK3-4 and DT3-1 are new pullulan-degrading Anoxybacillus strains.

Matched MeSH terms: Fatty Acids/analysis
Fulltext Optimization of sunflower oil transesterification process using sodium methoxide

KoohiKamali S, Tan CP, Ling TC

ScientificWorldJournal, 2012;2012:475027.
PMID: 22593688 DOI: 10.1100/2012/475027

In this study, the methanolysis process of sunflower oil was investigated to get high methyl esters (biodiesel) content using sodium methoxide. To reach to the best process conditions, central composite design (CCD) through response surface methodology (RSM) was employed. The optimal conditions predicted were the reaction time of 60 min, an excess stoichiometric amount of alcohol to oil ratio of 25%w/w and the catalyst content of 0.5%w/w, which lead to the highest methyl ester content (100%w/w). The methyl ester content of the mixture from gas chromatography analysis (GC) was compared to that of optimum point. Results, confirmed that there was no significant difference between the fatty acid methyl ester content of sunflower oil produced under the optimized condition and the experimental value (P ≥ 0.05). Furthermore, some fuel specifications of the resultant biodiesel were tested according to American standards for testing of materials (ASTM) methods. The outcome showed that the methyl ester mixture produced from the optimized condition met nearly most of the important biodiesel specifications recommended in ASTM D 6751 requirements. Thus, the sunflower oil methyl esters resulted from this study could be a suitable alternative for petrol diesels.

Matched MeSH terms: Fatty Acids/analysis
Nutritional properties of spent duck surimi-like material prepared by conventional and acid-alkaline solubilization methods

Nurkhoeriyati T, Huda N, Ahmad R

Int J Food Sci Nutr, 2012 Jun;63(4):498-505.
PMID: 22126368 DOI: 10.3109/09637486.2011.637902

The nutritional properties of surimi-like materials produced from spent duck meat processed conventionally (CDS) and processed with acid and alkaline solubilization (ACDS and ALDS, respectively) were studied. The essential amino acids (EAAs) content was significantly higher (p

Matched MeSH terms: Fatty Acids/analysis*
Characterization of low saturation palm oil products after continuous enzymatic interesterification and dry fractionation

Huey SM, Hock CC, Lin SW

J Food Sci, 2009 May-Jul;74(4):E177-83.
PMID: 19490322 DOI: 10.1111/j.1750-3841.2009.01122.x

The lipase-catalyzed interesterification of refined, bleached, deodorized palm olein with iodine value (IV) of 62 was studied in a pilot continuous packed-bed reactor operating at 65 degrees C. Sn-1,3 specific immobilized enzyme; Lipozyme TL IM (Thermomyces Lanuginosa) from Novozyme A/S was used in this study. The interesterification reaction produced fully solidified fats at ambient temperature due to the production of trisaturated triacylglycerols (TAG) (PPP and PPS, where P = palmitic acid, S = stearic acid). The reaction also increased the percentage of triunsaturated TAG (OLL, OLO, and OOO, where O = oleic acid, L = linoleic acid). The interesterified product was then dry fractionated at temperatures of 9, 12, 15, 18, and 21 degrees C to separate the saturated fats from the unsaturated. The results show that IV of olein increased when the fractionation temperature (T(FN)) decreased. The highest IV of olein was 72, obtained from T(FN) at 9 degrees C. After interesterification and laboratory-scale fractionation, the olein fractions contained higher unsaturation content ranging from 64.7% to 67.7% compared to the starting material (58.3%), while the saturation content was reduced from 41.7% to the range of 32.3% to 35.3%. The yields of these oleins were low with the range of 24.8% to 51.8% due to the limitation of the vacuum filtration. Ten kilograms of pilot-scale fractionation with membrane press filter was used to determine the exact olein yield. At T(FN) of 12 degrees C, 67.1% of olein with saturation content of 33.9% was obtained.

Matched MeSH terms: Fatty Acids/analysis
Properties of high-oleic palm oils derived by fractional crystallization

Ramli MR, Siew WL, Cheah KY

J Food Sci, 2008 Apr;73(3):C140-5.
PMID: 18387090 DOI: 10.1111/j.1750-3841.2007.00657.x

High-oleic palm oil (HOPO) with an oleic acid content of 59.0% and an iodine value (IV) of 78.2 was crystallized in a 200-kg De Smet crystallizer with a predetermined cooling program and appropriate agitation. The slurry was then fractionated by means of dry fractionation at 4, 8, 10, 12, and 15 degrees C. The oil and the fractionated products were subjected to physical and chemical analyses, including fatty acid composition, triacylglycerol and diacylglycerol composition, solid fat content, cloud point, slip melting point, and cold stability test. Fractionation at 15 degrees C resulted in the highest olein yield but with minimal oleic acid content. Due to the enhanced unsaturation of the oil, fractionation at relatively lower crystallization temperature showed a considerable effect on fatty acid composition as well as triacylglycerol and diacylglycerol composition of liquid fractions compared to higher crystallization temperature. The olein and stearin fractionated at 4 degrees C had the best cold stability at 0 degrees C and sharper melting profile, respectively.

Matched MeSH terms: Fatty Acids/analysis*
Seasonal variation of fatty acid content in natural microplankton from the Tumpat coastal waters of the South China Sea

Shamsudin L

Arch Physiol Biochem, 1998 Jul;106(3):253-60.
PMID: 10099722

In the search for better understanding on the nutritional quality of natural tropical plankton, samples were collected from shallow coastal waters facing the South China Sea during the dry monsoon (May-September) and the wet monsoon (November-April) seasons from March 1993 to July 1994. The total fatty acid content of the predominantly phytoplankton communities (25-200 microns sieve nets) varied four to fivefold with the lowest value occurring during the dry monsoon when blue-green became predominant. Saturated fatty acid content (SAFA), polyunsaturated fatty acid (PUFA) and total omega 3 (sigma omega 3) showed the same seasonal pattern as the total fatty acid with high values in October to December 1993. When species of the dinoflagellate Peridinium and Ceratium were present in considerable amount, the docosahexaenoic acid DHA content was high, especially from March to May 1993. The maximum content of eicosapentaenoic acid EPA, total omega-3 fatty acid, PUFA and sigma omega 3 in phytoplankton occurred during the pre-monsoon period (October and November 1993) when the diatoms were present in large amounts. The larger fraction sample (> 200 microns sieve nets) which consisted predominantly of zooplankton had high amounts of PUFA from September to November 1993.

Matched MeSH terms: Fatty Acids/analysis*

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links