Displaying publications 21 - 40 of 215 in total

Abstract:
Sort:
  1. Tran HT, Lin C, Lam SS, Le TH, Hoang HG, Bui XT, et al.
    Environ Pollut, 2023 Jan 01;316(Pt 2):120640.
    PMID: 36403881 DOI: 10.1016/j.envpol.2022.120640
    Di-(2-ethylhexyl) phthalate (DEHP), a plasticizer derived from phthalate ester, is used as an additive in industrial products such as plastics, paints, and medical devices. However, DEHP is known as an endocrine-disrupting chemical, causing cancers and adverse effects on human health. This study evaluated DEHP biodegradation efficiency via food waste composting during 35 days of incubation. At high DEHP concentrations (2167 mg kg-1) in food waste compost mixture, the DEHP biodegradation efficiency was 99% after 35 days. The highest degradation efficiency was recorded at the thermophilic phase (day 3 - day 11) with the biodegradation rate reached 187 mg kg-1 day-1. DEHP was metabolized to dibutyl phthalate (DBP) and dimethyl phthalate (DMP) and would be oxidized to benzyl alcohol (BA) and mineralized into CO2 and water via various metabolisms. Finally, the compost's quality with residual DEHP was evaluated using Brassica chinensis L. seeds via 96 h of germination tests. The compost (at day 35) with a trace amount of DEHP as the end product showed no significant effect on the germination rate of Brassica chinensis L. seeds (88%) compared to that without DEHP (94%), indicating that the compost can be reused as fertilizer in agricultural applications. These results provide an improved understanding of the DEHP biodegradation via food waste composting without bioaugmentation and hence facilitating its green remediation and conversion into value-added products. Nevertheless, further studies are needed on DEHP biodegradation in large-scale food waste composting or industrial applications.
    Matched MeSH terms: Refuse Disposal*
  2. Trakman G, Staley K, Forsyth A, Devlin B, Skiadopoulos A, Pearce K, et al.
    PMID: 34639496 DOI: 10.3390/ijerph181910194
    (1) Background: Community sport settings present a range of conflicting health behaviours, including the tension between being physically active and consuming discretionary foods. Therefore, community sport settings are considered a promising location for health promotion. The aim of this project was to evaluate perceptions, knowledge and the impact (e.g., barriers and outcomes) of a healthy-canteen (cafeteria) display, based on traffic light labeling (TLL), which was set up at an Australian Basketball Association Managers' Convention and Trade Show. (2) Methods: We set up a healthy 'canteen display and surveyed Basketball managers on their perceptions of the display before (Survey 1) and after (Survey 2) visiting the display. Three months later they were surveyed (Survey 3) on changes made to their community sport canteens. (3) Results: Eighty-eight, 76 and 22 participants completed Surveys 1, 2 and 3, respectively. Participants believed stocking healthy foods and beverages was important (mean 8.5/10). Food waste, lack of consumer interest and price were identified barriers to stocking healthy foods. After visiting the display, 75% were inspired to make changes and 50% were surprised by the differences between their perceptions of the healthfulness of foods and the TLL ratings. Post-convention, 41% and 70% made or had planned healthy changes to their community sport canteen. (4) Conclusions: A healthy-canteen display is a low-cost, easy-to-implement strategy that may be able to direct self-driven improvement in the healthfulness of foods stocked at community canteens and lead to improved nutritional intakes at these venues.
    Matched MeSH terms: Refuse Disposal*
  3. Teo PT, Anasyida AS, Basu P, Nurulakmal MS
    Waste Manag, 2014 Dec;34(12):2697-708.
    PMID: 25242607 DOI: 10.1016/j.wasman.2014.08.015
    Recently, various solid wastes from industry such as glass waste, fly ash, sewage sludge and slag have been recycled into various value-added products such as ceramic tile. The conventional solutions of dumping the wastes in landfills or incineration, including in Malaysia are getting obsolete as the annual huge amount of the solid wastes would boost-up disposal cost and may cause permanent damage to the flora and fauna. This recent waste recycling approach is much better and greener as it can resolve problems associated with over-limit storage of industrial wastes and reduce exploration of natural resources for ceramic tile to continuously sustain the nature. Therefore, in this project, an attempt was made to recycle electric arc furnace (EAF) slag waste, obtained from Malaysia's steel making industry, into ceramic tile via conventional powder compaction method. The research work was divided into two stages. The first stage was to evaluate the suitability of EAF slag in ceramic tile by varying weight percentage of EAF slag (40 wt.%, 50 wt.% and 60 wt.%) and ball clay (40 wt.%, 50 wt.% and 60 wt.%), with no addition of silica and potash feldspar. In the second stage, the weight percentage of EAF slag was fixed at 40 wt.% and the percentage of ball clay (30 wt.% and 40 wt.%), feldspar (10 wt.% and 20 wt.%) and silica (10 wt.% and 20 wt.%) added was varied accordingly. Results obtained show that as weight percentage of EAF slag increased up to 60 wt.%, the percentage of apparent porosity and water absorption also rose, with a reduction in tile flexural strength and increased porosity. On the other hand, limiting the weight percentage of EAF slag to 40 wt.% while increasing the weight percentage of ball clay led to a higher total percentage of anorthite and wollastonite minerals, resulting in higher flexural strength. It was found that introduction of silica and feldspar further improved the flexural strength due to optimization of densification process. The highest flexural strength, lowest apparent porosity and water absorption of EAF slag based tile was attained at the composition of 40 wt.% EAF slag--30 wt.% ball clay--10 wt.% feldspar--20 wt.% silica. The properties of ceramic tile made with EAF slag waste (up to 40 wt.%), especially flexural strength are comparable to those of commercial ceramic tile and are, therefore, suitable as high flexural strength and heavy-duty green ceramic floor tile. Continuous development is currently underway to improve the properties of tile so that this recycling approach could be one of the potential effective, efficient and sustainable solutions in sustaining our nature.
    Matched MeSH terms: Refuse Disposal/methods*
  4. Teh SS, Ahmad R, Wan-Abdullah WN, Liong MT
    J Food Sci, 2010 Apr;75(3):M155-64.
    PMID: 20492305 DOI: 10.1111/j.1750-3841.2010.01538.x
    Cell immobilization is an alternative to microencapsulation for the maintenance of cells in a liquid medium. The objective of this study was to evaluate the effects of agrowastes from durian (Durio zibethinus), cempedak (Artocarpus champeden), and mangosteen (Garcinia mangostana) as immobilizers for lactobacilli grown in soymilk. Rinds from the agrowastes were separated from the skin, dried, and ground (150 microm) to form powders and used as immobilizers. Scanning electron microscopy revealed that lactobacilli cells were attached and bound to the surface of the immobilizers. Immobilized cells of Lactobacillus acidophilus FTDC 1331, L. acidophilus FTDC 2631, L. acidophilus FTDC 2333, L. acidophilus FTDC 1733, and L. bulgaricus FTCC 0411 were inoculated into soymilk, stored at room temperature (25 degrees C) and growth properties were evaluated over 168 h. Soymilk inoculated with nonimmobilized cells was used as the control. Utilization of substrates, concentrations of lactic and acetic acids, and changes in pH were evaluated in soymilk over 186 h. Immobilized lactobacilli showed significantly better growth (P < 0.05) compared to the control, accompanied by higher production of lactic and acetic acids in soymilk. Soymilk containing immobilized cells showed greater reduction of soy sugars such as stachyose, raffinose, sucrose, fructose, and glucose compared to the control (P < 0.05).
    Matched MeSH terms: Refuse Disposal/methods
  5. Teh SS, Ahmad R, Wan-Abdullah WN, Liong MT
    J Agric Food Chem, 2009 Nov 11;57(21):10187-98.
    PMID: 19821558 DOI: 10.1021/jf902003a
    The objective of this study was to evaluate agricultural wastes as immobilizers for probiotics in liquid foods, such as soy milk. Probiotic strains were initially evaluated for acid and bile tolerance and the ability to produce alpha-galactosidase. Rinds of durian, mangosteen, and jackfruit were dried, ground, and sterilized prior to immobilization of selected strains ( Lactobacillus acidophilus FTDC 1331, L. acidophilus FTDC 2631, L. acidophilus FTDC 2333, L. acidophilus FTDC 1733, and Lactobacillus bulgaricus FTCC 0411). Immobilized cells were inoculated into soy milk, and growth properties were evaluated over 168 h at 37 degrees C. Soy milk containing free cells without agrowastes was used as the control. Immobilized probiotics showed increased growth, greater reduction of stachyose, sucrose, and glucose, higher production of lactic and acetic acids, and lower pH in soy milk compared to the control. The results illustrated that agrowastes could be used for the immobilization of probiotics with enhanced growth, utilization of substrates, and production of organic acids.
    Matched MeSH terms: Refuse Disposal/methods*
  6. Taufek NM, Mohamad Zulkifli NFN, Hamizah AN
    J Environ Manage, 2024 Jan 01;349:119467.
    PMID: 37976636 DOI: 10.1016/j.jenvman.2023.119467
    Innovative solutions are needed to limit environmental effect and optimise resource use as food waste generation rises worldwide. This study investigates the potential of upcycling food waste from fresh markets using Black Soldier Fly (Hermetia illucens) larvae (BSFL) as a sustainable approach. This study explored four fresh market food waste substrates for BSFL bioconversion: discarded fish waste (FI), slaughtered chicken waste (CHI), vegetable waste (VEG), and a 1:1:1 combination of all three (MIX). Soybean curd residue (SCR) was treated as the control substrate. The effects on larval growth, nutritional content, and waste bioconversion rates were examined. The larvae growth rate was strongly impacted by waste type, with BSF-fed CHI and MIX gaining 18.0 and 16.7 mg/d, respectively, followed by BSF-fed with SCR (12.2 mg/d), FI (8.9 mg/d) and VEG (7.6 mg/d). The waste type did not substantially alter BSFL length. The survival rate of the BSFL fed with the food waste studied ranges from 95 to 98.47%, with SCR being the highest. Our findings indicated that BSFL can effectively convert a variety of fresh market food waste into valuable biomass. CHI waste produced the highest larval biomass and bioconversion rate followed by MIX, SCR, FI and VEG. The different waste stream has a major influence on BSFL biomass nutrition. BSFL nutritional composition is independent of the substrate's nutritional content, indicating no direct correlation between substrate and BSFL biomass nutritional composition. SCR waste produced the highest protein content of BSFL (50.49%), followed by VEG (32.61%), MIX (32.57%), FI (31.03%) and CHI (29.06%). SCR waste also produced BSFL biomass with lowest lipid content (26.55%) compared to other waste which resulted into BSFL with lipid levels ranging from 42.92% to 53.72%. BSFL-fed with SCR is the most suitable to be used as an alternative animal's feed based on the protein and lipid levels, while defatting procedure is necessary for the other waste-fed BSFL to render it suitability as animal feed alternatives. Based on bioconversion rate, BSFL growth, and lipid content, the MIX and CHI waste might be viable substrates for future research.
    Matched MeSH terms: Refuse Disposal*
  7. Tanimu MI, Mohd Ghazi TI, Harun MR, Idris A
    Appl Microbiol Biotechnol, 2015 May;99(10):4509-20.
    PMID: 25761621 DOI: 10.1007/s00253-015-6486-4
    Foaming problem which occurred occasionally during food waste (FW) anaerobic digestion (AD) was investigated with the Malaysian FW by stepwise increase in organic loading (OL) from 0.5 to 7.5 g VS/L. The FW feedstock with carbon to nitrogen (C/N) ratio of 17 was upgraded to C/N ratio of 26 and 30 by mixing with other wastes. The digestion which was carried out at 37 °C in 1-L batch reactors showed that foam formation initiated at OL of 1.5 g VS/L and was further enhanced as OL of feedstock was increased. The digestion foaming reached its maximum at OL of 5.5 g VS/L and did not increase further even when OL was increased to 7.5 g VS/Ld. Increase in the C/N ratio of feedstock significantly enhanced the microbial degradation activity, leading to better removal of foam causing intermediates and reduced foaming in the reactor by up to 60%.
    Matched MeSH terms: Refuse Disposal
  8. Syed Sharizman Syed Abdul Rahim
    MyJurnal
    Introduction: Food poisoning usually occurs with the consumption of contaminated food. Some related factors are unsafe water supply, poor sanitation, unhygienic waste disposal and unhygienic practices or poor personal hygiene by food handlers. The purpose of this study is to describe the spatial epidemiology of food poisoning cases in the four districts of Sabah. Methods: This review consists of all food poisoning cases reported from 2011 to 2014 from Kota Kinabalu, Penampang, Putatan and Papar, Sabah. The coordinates used for locations of cases are based on home addresses. Tools such as SPSS v20, ArcGIS v10 and CrimeStat IV were used for data analysis and mapping. Results: A total of 1,787 cases of food poisoning were reported during this review period. In 2011, only Kota Kinabalu and Pa-par illustrated significant food poisoning clusters. Meanwhile, in the year 2012 to 2014, Kota Kinabalu, Penampang and Putatan had clustering of cases. Analysis of nearest neighbour hierarchical clustering analysis showed 32 food poisoning clusters. There were 4 food poisoning points at 500 meters radius around a market place, 2 food poisoning points near a sewage plant and 1 food poisoning point near a water treatment plant. No cases were near a municipal landfill. For rivers and coastline, there were 37 points of food poisoning cases in the proximity of 500 meters. Con-clusion: Food poisoning usually occurs in clusters with possible associated environmental factors.
    Matched MeSH terms: Refuse Disposal
  9. Syafalni, Lim HK, Ismail N, Abustan I, Murshed MF, Ahmad A
    J Environ Manage, 2012 Dec 15;112:353-9.
    PMID: 22964042 DOI: 10.1016/j.jenvman.2012.08.001
    In this research, the capability of lateritic soil used as coagulant for the treatment of stabilized leachate from the Penang-Malaysia Landfill Site was investigated. The evaluation of lateritic soil coagulant in comparison with commercialized chemical coagulants, such as alum, was performed using conventional jar test experiments. The optimum pH and coagulant dosage were identified for the lateritic soil coagulant and the comparative alum coagulant. It was found that the application of lateritic soil coagulant was quite efficient in the removal of COD, color and ammoniacal-nitrogen content from the landfill leachate. The optimal pH value was 2.0, while 14 g/L of lateritic soil coagulant was sufficient in removing 65.7% COD, 81.8% color and 41.2% ammoniacal-nitrogen. Conversely, the optimal pH and coagulant dosage for the alum were pH 4.8 and 10 g/L respectively, where 85.4% COD, 96.4% color and 47.6% ammoniacal-nitrogen were removed from the same leachate sample. Additionally, the Sludge Volume Index (SVI) ratio of alum and lateritic soil coagulant was 53:1, which indicated that less sludge was produced and was an environmentally friendly product. Therefore, lateritic soil coagulant can be considered a viable alternative in the treatment of landfill leachate.
    Matched MeSH terms: Refuse Disposal/methods*
  10. Sumiani Y, Onn C, Mohd Din M, Wan Jaafar W
    The use of environmental planning tools for optimum solid waste landfill siting taking into account all environmental implications was carried out by applying Life Cycle Analysis (LCA) to enhance the research information obtained from initial analysis using Geographical Information Systems (GIS). The objective of this study is to identify the most eco-friendly landfill site by conducting a LCA analysis upon 5 potential GIS generated sites which incorporated eleven important criteria related to the social, environmental, and economical factors. The LCA analysis utilized the daily distance covered by collection trucks among the 5 selected landfill sites to generate inventory data on total energy usage for each landfill sites. The planning and selection of the potential sites were facilitated after conducting environmental impact analysis upon the inventory data which showed the least environmental impact.
    Matched MeSH terms: Refuse Disposal
  11. Sujá F, Yusof A, Osman MA
    Water Sci Technol, 2010;61(2):389-96.
    PMID: 20107265 DOI: 10.2166/wst.2010.825
    Leachate samples collected from the Ampar Tenang open dumping site at Dengkil, Malaysia, were analyzed for acute toxicity. Two in vivo toxicity tests, Acute Oral Toxicity (AOT) and Primary Skin Irritation (PSI), were performed using Sprague Dawley rats and New Zealand Albino rabbits, respectively. The leachate samples were also analyzed chemically for nitrate and phosphate, ammonia-nitrogen, Kjeldahl-nitrogen and Chemical Oxygen Demand (COD). Results from both the AOT and PSI tests showed that the leachate did not contribute to acute toxicity. The AOT test yielded a negative result: no effect was observed in at least half of the rat population. The PSI test on rabbits produced effects only at a leachate concentration of 100%. However, the skin irritation was minor, and the test returned a negative result. The four chemical tests showed high levels of nutrient pollution in the leachate. The nitrate and phosphate concentrations were 2.1 mg/L and 23.6 mg/L, respectively. Further, the ammonia-nitrogen concentration was 1,000 mg NH(3)-N/L the Kjeldahl-nitrogen level was 446 mg NH(3)-N/L, and the Chemical Oxygen Demand was 1,300 mg/L. The in vivo toxicity and chemical analyses showed that the leachate is polluted but not acutely toxic to organisms.
    Matched MeSH terms: Refuse Disposal/methods*
  12. Su H, Kanchanatip E, Wang D, Zheng R, Huang Z, Chen Y, et al.
    Waste Manag, 2020 Feb 01;102:520-527.
    PMID: 31765972 DOI: 10.1016/j.wasman.2019.11.018
    In China, waste sorting practice is not strictly followed, plastics, especially food packaging, are commonly mixed in food waste. Supercritical water gasification (SCWG) of unsorted food waste was conducted in this study, using model unsorted food waste by mixture of pure food waste and plastic. Different operating parameters including reaction temperature, residence time, and feedstock concentration were investigated. Moreover, the effect of three representative food additives namely NaCl, NaHCO3 and Na2CO3 were tested in this work. Finally, comparative analysis about SCWG of unsorted food waste, pure food waste, and plastic was studied. It was found that higher reaction temperature, longer residence time and lower feedstock concentration were advantageous for SCWG of unsorted food waste. Within the range of operating parameters in this study, when the feedstock concentration was 5 wt%, the highest H2 yield (7.69 mol/kg), H2 selectivity (82.11%), total gas yield (17.05 mol/kg), and efficiencies of SCWG (cold gas efficiency, gasification efficiency, carbon gasification efficiency, and hydrogen gasification efficiency) were obtained at 480 °C for 75 min. Also, the addition of food additives with Na+ promoted the SCWG of unsorted food waste. The Na2CO3 showed the best catalytic performance on enhancement of H2 and syngas production. This research demonstrated the positive effect of waste sorting on the SCWG of food waste, and provided novel results and information that help to overcome the problems in the process of food waste treatment and accelerate the industrial application of SCWG technology in the future.
    Matched MeSH terms: Refuse Disposal*
  13. Su G, Ong HC, Fattah IMR, Ok YS, Jang JH, Wang CT
    Sci Total Environ, 2022 Feb 25;809:151170.
    PMID: 34699825 DOI: 10.1016/j.scitotenv.2021.151170
    The continuous growth of population and the steady improvement of people's living standards have accelerated the generation of massive food waste. Untreated food waste has great potential to harm the environment and human health due to bad odor release, bacterial leaching, and virus transmission. However, the application of traditional disposal techniques like composting, landfilling, animal feeding, and anaerobic digestion are difficult to ease the environmental burdens because of problems such as large land occupation, virus transmission, hazardous gas emissions, and poor efficiency. Pyrolysis is a practical and promising route to reduce the environmental burden by converting food waste into bioenergy. This paper aims to analyze the characteristics of food waste, introduce the production of biofuels from conventional and advanced pyrolysis of food waste, and provide a basis for scientific disposal and sustainable management of food waste. The review shows that co-pyrolysis and catalytic pyrolysis significantly impact the pyrolysis process and product characteristics. The addition of tire waste promotes the synthesis of hydrocarbons and inhibits the formation of oxygenated compounds efficiently. The application of calcium oxide (CaO) exhibits good performance in the increment of bio-oil yield and hydrocarbon content. Based on this literature review, pyrolysis can be considered as the optimal technique for dealing with food waste and producing valuable products.
    Matched MeSH terms: Refuse Disposal*
  14. Soomro MA, Ali MH, Zailani S, Tseng ML, Makhbul ZM
    Environ Sci Pollut Res Int, 2023 Jan;30(3):5717-5729.
    PMID: 35978247 DOI: 10.1007/s11356-022-22558-z
    The objective of this study is to explore the similarities and differences in the barriers and motivations between the plastic and resins and food and beverages industries as these two industries are the major contributors of solid waste in Malaysia. Prior studies are lacking with regard to explaining the barriers and motivations in solid waste management from the Malaysian context. This study is focused on 10 firms from the plastics and resins industry and 9 from the food and beverages industry in Malaysia. Through Rasch measurement theory, the results indicate that the barriers of lack of skills and qualifications and lack of closed-loop control and the motivations of cost savings and a business model are performed differently. The findings further confirm that the lack of skills and qualifications is a more difficult barrier to overcome than the lack of closed-loop control, while the motivation factor of a business model is more difficult to achieve than cost savings. In terms of practical contribution, this study provides results that can help policy makers in Malaysia to close the gaps present regarding the adoption of solid waste management practices and to devise appropriate incentives. The study also supports managers of companies in regard to working on the most pressing hindering and promoting factors in the field of solid waste management.
    Matched MeSH terms: Refuse Disposal*
  15. Soo CS, Yap WS, Hon WM, Phang LY
    World J Microbiol Biotechnol, 2015 Oct;31(10):1475-88.
    PMID: 26185061 DOI: 10.1007/s11274-015-1902-6
    The simultaneous production of hydrogen and ethanol by microorganisms from waste materials in a bioreactor system would establish cost-effective and time-saving biofuel production. This review aims to present the current status of fermentation processes producing hydrogen accompanied by ethanol as a co-product. We outlined the microbes used and their fundamental pathways for hydrogen and ethanol fermentation. Moreover, we discussed the exploitation of renewable and sustainable waste materials as promising feedstock and the limitations encountered. The low substrate bioconversion rate in hydrogen and ethanol co-production is regarded as the primary constraint towards the development of large scale applications. Thus, microbes with an enhanced capability have been generated via genetic manipulation to diminish the inefficiency of substrate consumption. In this review, other potential approaches to improve the performance of co-production through fermentation were also elaborated. This review will be a useful guide for the future development of hydrogen and ethanol co-production using waste materials.
    Matched MeSH terms: Refuse Disposal/methods*
  16. Sonak S, Pangam P, Giriyan A
    J Environ Manage, 2008 Oct;89(1):14-23.
    PMID: 17544565
    A tsunami, triggered by a massive undersea earthquake off Sumatra in Indonesia, greatly devastated the lives, property and infrastructure of coastal communities in the coastal states of India, Andaman and Nicobar Islands, Indonesia, Sri Lanka, Malaysia and Thailand. This event attracted the attention of environmental managers at all levels, local, national, regional and global. It also shifted the focus from the impact of human activities on the environment to the impacts of natural hazards. Recovery/reconstruction of these areas is highly challenging. A clear understanding of the complex dynamics of the coast and the types of challenges faced by the several stakeholders of the coast is required. Issues such as sustainability, equity and community participation assume importance. The concept of ICZM (integrated coastal zone management) has been effectively used in most parts of the world. This concept emphasizes the holistic assessment of the coast and a multidisciplinary analysis using participatory processes. It integrates anthropocentric and eco-centric approaches. This paper documents several issues involved in the recovery of tsunami-affected areas and recommends the application of the ICZM concept to the reconstruction efforts.
    Matched MeSH terms: Refuse Disposal
  17. Sommer SG, Mathanpaal G, Dass GT
    Environ Technol, 2005 Mar;26(3):303-12.
    PMID: 15881027
    On commercial pig production farms in South East (SE) Asia, the liquid effluent is often discharged into rivers. The discharge is a hazard to the environment and to the health of people using water from the river either for consumption or for irrigation. Therefore, a simple percolation biofilter for treatment of the liquid effluent was developed. Pig slurry was treated in test-biofilters packed with different biomass for the purpose of selecting the most efficient material, thereafter the efficiency of the biofilter was examined at farm scale with demo biofilters using the most efficient material. The effect of using "Effective Microorganisms" (EM) added to slurry that was treated with biofilter material mixed with Glenor KR+ was examined. Slurry treatment in the test-biofilters indicated that rice straw was better than coconut husks, wood shavings, rattan strips and oil palm fronds in reducing BOD. Addition of EM and Glenor KR+ to slurry and biofilter material, respectively, had no effect on the temperature of the biofilter material or on the concentrations of organic and inorganic components of the treated slurry. The BOD of slurry treated in test biofilters is reduced to between 80 and 637 mg O2 I(-1) and in the demo biofilter to between 3094 and 3376 mg O2 l(-1). The concentration of BOD in the effluent is related to the BOD in the slurry being treated and the BOD concentration in slurry treated in test biofilters was lower than BOD of slurry treated in demo biofilters. The demo biofilter can reduce BOD to between 52 an 56% of the original value, and TSS, COD (chemical oxygen demand) and ammonium (NH4+) to 41-55% of the original slurry. The treated effluent could not meet the standards for discharge to rivers. The composted biofilter material has a high content of nitrogen and phosphorus; consequently, the fertilizer value of the compost is high. The investments costs were 123 US dollar per SPP which has to be reduced if this method should be a treatment option in practise.
    Matched MeSH terms: Refuse Disposal/methods*
  18. Soda W, Noble AD, Suzuki S, Simmons R, Sindhusen LA, Bhuthorndharaj S
    J Environ Qual, 2006 Oct 27;35(6):2293-301.
    PMID: 17071900
    Acid waste bentonite is a byproduct from vegetable oil bleaching that is acidic (pH < 3.0) and hydrophobic. These materials are currently disposed of in landfills and could potentially have a negative impact on the effective function of microbes that are intolerant of acidic conditions. A study was undertaken using three different sources of acid waste bentonites, namely soybean oil bentonite (SB), palm oil bentonite (PB), and rice bran oil bentonite (RB). These materials were co-composted with rice husk, rice husk ash, and chicken litter to eliminate their acid reactivity and hydrophobic nature. The organic carbon (OC) content, pH, exchangeable cations, and cation exchange capacity (CEC) of the acid-activated bentonites increased significantly after the co-composting phase. In addition, the hydrophobic nature of these materials as measured using the water drop penetration time (WDPT) decreased from >10 800 s to 16 to 80 s after composting. Furthermore, these composted materials showed positive impacts on soil physical attributes including specific surface area, bulk density, and available water content for crop growth. Highly significant increases in maize biomass (Zea mays L.) production over two consecutive cropping cycles was observed in treatments receiving co-composted bentonite. The study clearly demonstrates the potential for converting an environmentally hazardous material into a high-quality soil conditioner using readily available agricultural byproducts. It is envisaged that the application of these composted acid waste bentonites to degraded soils will increase productivity and on-farm income, thus contributing toward food security and poverty alleviation.
    Matched MeSH terms: Refuse Disposal*
  19. Sim SM, Lai PSM, Tan KM, Lee HG, Sulaiman CZ
    Asia Pac J Public Health, 2018 11;30(8):737-749.
    PMID: 30486652 DOI: 10.1177/1010539518811161
    The aim of our study was to develop and validate the return and disposal of unused medications (ReDiUM), as there are currently no validated tools available (worldwide) to assess this. The ReDiUM was developed by an expert panel. It was then administered to community-dwelling adults, who could understand English, at baseline and 2 weeks later. A total of 338/354 participants agreed to participate (response rate = 95.4%). Flesch reading ease was 60. The overall Cronbach's α was 0.703 (range = 0.609-0.762). At test-retest, κ values ranged from 0.244 to 0.523. Median total knowledge score was 60% (interquartile range = 40% to 70%). The majority of participants (94.4%) knew that improper drug disposal has harmful effects on the environment. However, their knowledge was low (11.2%) regarding the disposal of pressurized metered-dose inhalers in the garbage. The ReDiUM was found to be a valid and reliable instrument to assess the knowledge, attitude, and practice on the ReDiUM in Malaysia.
    Matched MeSH terms: Refuse Disposal*
  20. Shuokr Qarani Aziz, Hamidi Abdul Aziz, Mohammed Jk Bashir, Mohd Suffian Yusoff
    Waste Manag Res, 2011 Aug;29(8):880-7.
    PMID: 21242179 DOI: 10.1177/0734242X10387462
    Solid waste collection and disposal are among the most vital services provided to about 700 770 residents of the city of Erbil in northern Iraq. As such, proper waste management systems that consider both the quantity and composition of domestic solid waste are strongly required to address the increasing amount of solid waste. Unfortunately, these essential data are not easily available. The present study sought to gather data on the quantity and composition of domestic solid waste collected from different quarters in Erbil, and the feasibility of recycling these wastes. The solid waste generation rate (GR), uncompacted density, and weight percentages of combustible and incombustible materials were determined based on the collected materials (i.e., food, plastic, paper, metal, glass and cloth). The results show that the average GR and uncompacted density were 0.654 kg capita(-1) day(-1) and 175.72 kg m(-3), respectively. The weight percentages of food, plastic, paper, metal, glass, and cloth as components of domestic solid waste were 79.34, 6.28, 5.9, 3.6, 3.42 and 1.45%, respectively.
    Matched MeSH terms: Refuse Disposal/methods*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links