MyMedR

Displaying publications 421 - 440 of 1297 in total

Abstract:

Sort:

Polysaccharide with antioxidant, α-amylase inhibitory and ACE inhibitory activities from Momordica charantia

Tan HF, Gan CY

Int J Biol Macromol, 2016 Apr;85:487-96.
PMID: 26778156 DOI: 10.1016/j.ijbiomac.2016.01.023

Functional polysaccharide was isolated from Momordica charantia, with a yield of 36% (w/w). M. charantia bioactive polysaccharide (MCBP) was an acidic and branched heteropolysaccharide with a molecular weight of 92 kDa. Fourier transform infrared spectroscopic analysis indicated that MCBP was a pectin-like polysaccharide with an esterification degree of 53% and it contains numerous monosaccharides, predominantly glucose, galactose, and galaturonic acid. The results also showed that MCBP exhibited free radical scavenging activity (31.9%), ferric reducing antioxidant power (0.95 mM), α-amylase inhibition (89.1%), and angiotensin-converting enzyme inhibition (94.1%). In the terms of functionality, MCBP showed a lower water-holding capacity but higher in oil-holding capacity, emulsifying activity and foaming capacity compared to citrus pectin. Scanning electron microscopy images demonstrated that MCBP formed gels with a porous structure, and flow analysis showed that the gel solution exhibited pseudoplastic shear-thinning behavior. These findings indicated that MCBP is a promising functional macromolecular carbohydrate for the food and nutraceutical industries.

Matched MeSH terms: Microscopy, Electron, Scanning
GEP-based method to formulate adhesion strength and hardness of Nb PVD coated on Ti-6Al-7Nb aimed at developing mixed oxide nanotubular arrays

Rafieerad AR, Bushroa AR, Nasiri-Tabrizi B, Fallahpour A, Vadivelu J, Musa SN, et al.

J Mech Behav Biomed Mater, 2016 08;61:182-196.
PMID: 26874249 DOI: 10.1016/j.jmbbm.2016.01.028

PVD process as a thin film coating method is highly applicable for both metallic and ceramic materials, which is faced with the necessity of choosing the correct parameters to achieve optimal results. In the present study, a GEP-based model for the first time was proposed as a safe and accurate method to predict the adhesion strength and hardness of the Nb PVD coated aimed at growing the mixed oxide nanotubular arrays on Ti67. Here, the training and testing analysis were executed for both adhesion strength and hardness. The optimum parameter combination for the scratch adhesion strength and micro hardness was determined by the maximum mean S/N ratio, which was 350W, 20 sccm, and a DC bias of 90V. Results showed that the values calculated in the training and testing in GEP model were very close to the actual experiments designed by Taguchi. The as-sputtered Nb coating with highest adhesion strength and microhardness was electrochemically anodized at 20V for 4h. From the FESEM images and EDS results of the annealed sample, a thick layer of bone-like apatite was formed on the sample surface after soaking in SBF for 10 days, which can be connected to the development of a highly ordered nanotube arrays. This novel approach provides an outline for the future design of nanostructured coatings for a wide range of applications.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Hydrothermal preparation of silver telluride nanostructures and photo-catalytic investigation in degradation of toxic dyes

Gholamrezaei S, Salavati-Niasari M, Ghanbari D, Bagheri S

Sci Rep, 2016;6:20060.
PMID: 26805744 DOI: 10.1038/srep20060

Different morphologies of Ag2Te nanostructures were synthesized using TeCl4 as a new precursor and hydrazine hydrate as reducing agent by a hydrothermal method. Various parameters that affect on morphology and purity of nanostructures were optimized. According to our experiments the best time and temperature for preparation of this nanostructure are 12 h and 120 °C. The photo-catalytic behaviour of nanostructures in presence of UV-visible light for degradation of methyl orange was investigated. Results show that the presence of UV light is necessary for an efficient degradation of dye in aqueous solution. On the other hand, as observations propose the Ag2Te reveal a strong photoluminescence peak at room temperature that could be attributed to high level transition in the semiconductor. Nanostructures were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) techniques and UV-visible scanning spectrometer (UV-Vis).

Matched MeSH terms: Microscopy, Electron, Scanning
Anastrozole is a dose-specific superovulator and favors implantation in rats: a prospective study

Mwakikunga A, Hosie MJ

Cell Tissue Res, 2016 Apr;364(1):209-17.
PMID: 25971929 DOI: 10.1007/s00441-015-2180-1

An alternative superovulator to replace clomiphene citrate (CC) is needed as it is unsuitable for women with polycystic ovarian syndrome and is associated with low pregnancy rates. Anastrozole is an effective superovulator, but has not been well researched. The aim of this study was to determine the optimal dose of anastrozole as a superovulator and ascertain its effects on implantation and uterine ultrastructure during early pregnancy in Wistar rats using scanning electron microscopy. The uterine morphological characteristics which were studied in day 1 and 6 pregnant rats include microvilli density, length, surface "beads", surface glycocalyx, cell borders and apices, uterine surface fording and large surface protrusions. A significant increase in implantation sites is seen in the 15 mg/kg anastrozole group, compared to control. Day 1 and 6 anastrozole groups have similar morphology to the control and different to the CC group. At day 6, large surface protrusions are mostly noted but not limited to anastrozole-treated rats; anastrozole also appears to retain glycocalyx to some extent. The increased number of implantation sites in the 15 mg/kg anastrozole group suggests that this dose superovulates and favors implantation. Anastrozole is probably dose-/species-specific and additionally the surface uterine morphology suggests that anastrozole is implantation friendly.

Matched MeSH terms: Microscopy, Electron, Scanning
Patterns of tissue damage produced by repeated use of a corneal trephine: a scanning electron microscopic study

Jaais F, Dutton GN

Ophthalmic Surg, 1992 Mar;23(3):210-4.
PMID: 1574293

We studied by scanning electron microscopy the effects of the repeated use of a newly-designed, disposable, suction trephine (Microsurgical, Ltd, Bedfordshire, England) on the nature of the cut of successive corneal buttons from sheep eyes. After the trephine was used more than nine times, the cut edge became more irregular as successive buttons were produced. Also, progressively greater degrees of endothelial cells adjacent to the cut edge were lost. Although the corneal buttons initially were circular, those produced after the 20th cut became more oval. These results suggest that a disposable corneal trephine should be reused no more than nine times.

Matched MeSH terms: Microscopy, Electron, Scanning
Cleansing and surface modifying agents on implants: fixation and related aspects of aesthetics

Ling BC, Gillings BR

Asian J Aesthet Dent, 1995;3:17-21.
PMID: 9063105

With the prognosis of dental implant replacement of missing teeth becoming better each year, practitioners are focusing their attention on the aesthetic aspects of implantology. However, improvement in aesthetics is only possible with the improvement in implant technology, surgical techniques and prosthodontic procedures. This study aimed at evaluating the effects of various physical and chemical agents on the implant surface; with the view of obtaining increased surface area and biocompatibility. The study found that the treatment of air-aluminum oxide blasted implants using a mixture of 30% HNO3-5% HF acids produced a surface which meets the consideration of aesthetics for implants placed in the anterior maxillary region.

Matched MeSH terms: Microscopy, Electron, Scanning
Immunolabelling of prolactin at ultrastructural level using the protein A-gold technique on Epon-embedded tissue

Ng KH, Tan KL, Gan SK, Looi LM

Malays J Pathol, 1992 Jun;14(1):29-33.
PMID: 1469915

The use of the colloidal-gold technique in electron microscopy immunocytochemistry has provided important information on the in situ localisation of intracellular antigens. We have developed a post-embedding technique for prolactin localisation on resin-embedded human pituitary tissue sections by the use of the protein-A gold conjugate. Human pituitary tissue obtained at autopsy was processed for electron microscopical study without post-osmication and then embedded in Epon. The indirect immunoperoxidase method was used for light microscopical targetting of lactotroph cells for subsequent electron microscopical antigen localisation. Ultra-thin sections were labelled with human anti-human prolactin followed by protein-A gold conjugate. Specific labelling was observed over secretory granules with a density of 15-30 particles per granule, as determined by the Quantimet 570 image analysis system. This technique provides a means of studying the pathophysiology of hormonal secretion at ultrastructural level and can be a useful tool in diagnostic and research investigations.

Matched MeSH terms: Microscopy, Electron
The Sertoli cell of the water buffalo--an electron microscopic study

Azmi TI, Bongso TA, Harisah M, Basrur PK

Can. J. Vet. Res., 1990 Jan;54(1):93-8.
PMID: 2306676

The ultrastructure of Sertoli cells in the seminiferous tubules of water buffaloes before and during sexual maturity was studied by transmission electron microscopy, with emphasis on the intranucleolar vesicular elements. Sertoli cells of animals under 12 months of age were distinguished from the germ cells by the presence of electron dense membrane bound bodies within their cytoplasm. These cells, referred to as basal indifferent supporting cells, were probably involved in the phagocytosis and elimination of degenerating spermatocytes, which failed to differentiate into spermatids and spermatozoa in animals under one year of age. In 12 month old animals, a few Sertoli cells exhibiting the vesicular elements appeared in the nucleolar region while in animals over 15 months of age Sertoli cells could be positively identified by the characteristic cytoplasm containing microtubules, elongated and electron dense mitochondria, extensive granular endoplasmic reticulum and the presence of spermatids in various stages of spermiogenesis. The vesicular elements in the nucleolar region of the Sertoli cells were most prominent at this stage. Ultrastructural features of the Sertoli cells revealed an abundance of ribosome-like particles surrounding the vesicles of varying size. Some of these vesicular elements contained amorphous material suggesting that they represent the products sequestered in the nuclear region for transport to the cytoplasm and that the process of spermiogenesis may be dependent on the ability of Sertoli cells to generate these products at sexual maturity.

Matched MeSH terms: Microscopy, Electron
Ethanol fermentation in an immobilized cell reactor using Saccharomyces cerevisiae

Najafpour G, Younesi H, Syahidah Ku Ismail K

Bioresour Technol, 2004 May;92(3):251-60.
PMID: 14766158

Fermentation of sugar by Saccharomyces cerevisiae, for production of ethanol in an immobilized cell reactor (ICR) was successfully carried out to improve the performance of the fermentation process. The fermentation set-up was comprised of a column packed with beads of immobilized cells. The immobilization of S. cerevisiae was simply performed by the enriched cells cultured media harvested at exponential growth phase. The fixed cell loaded ICR was carried out at initial stage of operation and the cell was entrapped by calcium alginate. The production of ethanol was steady after 24 h of operation. The concentration of ethanol was affected by the media flow rates and residence time distribution from 2 to 7 h. In addition, batch fermentation was carried out with 50 g/l glucose concentration. Subsequently, the ethanol productions and the reactor productivities of batch fermentation and immobilized cells were compared. In batch fermentation, sugar consumption and ethanol production obtained were 99.6% and 12.5% v/v after 27 h while in the ICR, 88.2% and 16.7% v/v were obtained with 6 h retention time. Nearly 5% ethanol production was achieved with high glucose concentration (150 g/l) at 6 h retention time. A yield of 38% was obtained with 150 g/l glucose. The yield was improved approximately 27% on ICR and a 24 h fermentation time was reduced to 7 h. The cell growth rate was based on the Monod rate equation. The kinetic constants (K(s) and mu(m)) of batch fermentation were 2.3 g/l and 0.35 g/lh, respectively. The maximum yield of biomass on substrate (Y(X-S)) and the maximum yield of product on substrate (Y(P-S)) in batch fermentations were 50.8% and 31.2% respectively. Productivity of the ICR were 1.3, 2.3, and 2.8 g/lh for 25, 35, 50 g/l of glucose concentration, respectively. The productivity of ethanol in batch fermentation with 50 g/l glucose was calculated as 0.29 g/lh. Maximum production of ethanol in ICR when compared to batch reactor has shown to increase approximately 10-fold. The performance of the two reactors was compared and a respective rate model was proposed. The present research has shown that high sugar concentration (150 g/l) in the ICR column was successfully converted to ethanol. The achieved results in ICR with high substrate concentration are promising for scale up operation. The proposed model can be used to design a lager scale ICR column for production of high ethanol concentration.

Matched MeSH terms: Microscopy, Electron, Scanning
Ultrastructural observations on the merocyst and gametocytes of Hepatocystis spp. from Malaysian squirrels

Canning EU, Sinden RE, Landau I, Miltgen F

Ann Parasitol Hum Comp, 1976 11 1;51(6):607-23.
PMID: 829210

An immature merocyst of Hepatocystis malayensis and gametocytes of H. brayi were studied with the electron microscope. The merocyst consisted of a highly complex cytoplasmic reticulum ramifying through an amorphous matrix: the entire complex was enclosed by a simple unit membrane. The host cell was apparently destroyed completely during growth of the cyst. Immature gametocytes were highly amoeboid and showed extensive vacuolisation or attenuation of the cytoplasm. The nucleus contained one or two prominent nucleoli. Mature gametocytes had compact cytoplasm and contained pyriform osmiophilic bodies which were believed to function in the release of the parasites from the host cells. Macrogametocytes were distinguished from microgametocytes by cytoplasmic differences in numbers of ribosomes, and cristate mitochondria and in the extent of development of the smooth endoplasmic reticulum. The compact nuclei of the macrogametocytes had inconspicuous DNA but prominent nucleoli whereas those of the microgametocytes were irregular and showed a central aggregate of DNA. In microgametogenesis karyokinesis of the parent nucleus was delayed until axoneme formation was complete. Then the nuclear buds were extruded into emerging microgametes. At fertilisation the plasmalemmas of the two gametes fused and the single axoneme and nucleus of the microgamete moved into the cytoplasm of the macrogamete.

Matched MeSH terms: Microscopy, Electron
A note concerning the possibility that the lesions in scurvy are due to a failure to produce 'compact' collagen fibres

Candlish J

Med J Malaya, 1966 Dec;21(2):161-3.
PMID: 4227387
Matched MeSH terms: Microscopy, Electron
Fulltext Reinventing nano drug delivery systems for hydrophilic active ingredients in Ayurvedic lipid based formulations containing poly herbal decoction

Duraipandi S, Selvakumar V

J Ayurveda Integr Med, 2019 01 08;11(3):224-227.
PMID: 30635246 DOI: 10.1016/j.jaim.2018.01.008

BACKGROUND: Anu Tailam, an Ayurvedic medicated oil where 'anu' meant for atom and 'tailam' meant for oil and virtually meant for 'oil of subtle or atomic size particles'. Since the major active ingredients in this formulation are incorporated from the polyherbal decoction, it is expected to contain predominantly water soluble ingredients.
OBJECTIVES: It is hypothesized that these polar active botanical ingredients are present in the formulation should be either suspended in the form of submicron particles or entrapped in the submicron vesicular structures since the formulation did not show any precipitation or phase separation instead showed a monophasic oily liquid with very little moisture.
MATERIALS AND METHODS: In the present investigation, the micro architecture of the anu tailam is studied via column chromatography and high performance thin layer chromatography to prove the contents are polar hydrophilic compounds followed by optical microscopy, photon correlation Spectroscopy (PCS) and environmental scanning electron microscope (ESEM) to study the particle/vesicle size of the formulation.
RESULTS: In this study, it was proved that the formulation contained only polar ingredients and can be extracted in polar solvents like methanol and ethanol. It was also found that the formulation taken for study contained nano particles of the active botanical ingredients embedded in a network of vesicular structures of the lipid base.
CONCLUSION: The selected Ayurvedic formulation 'anutailam' found to contain novel nano drug delivery system to deliver water soluble ingredients across barriers.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Morphological and optical properties of graphene film synthesized from waste of industrial cooking oil, AYAMAS using DTCVD method

Mohd Muzamir Mahat, Nurfazianawatie Mohd Zin, Nurul Afaah Abdullah, Salifairus Mohammad Jafar, Mohd Firdaus Malek, M. Rusop, et al.

Science Letters, 2020;14(2):24-33.
MyJurnal

The synthesis of graphene by double thermal chemical vapor deposition (DTCVD) using waste of industrial cooking oil (WICO) as a natural carbon source was investigated. The synthesis parameter (Argon gas flow rate) was varied between 50sccm to 300sccm by 50sccm increments. The function of Argon gas is to provide ambient condition, remove the atmospheric air from the tube and could improve the crystallinity of graphene during synthesis. WICO (from AYAMAS food processing) was placed in the first furnace (precursor furnace) and nickel was placed in the second furnace (deposition furnace). During the synthesis, elevated quantities of carbon from the source material are separated and precipitated on the Nickel surface. The sample were characterized by using Field Emission Scanning Electron Microscopy (FESEM), X-Ray Diffraction (XRD), Energy Dispersive X-ray (EDX), and Ultraviolet Visible (UV-Vis) spectroscopy. Based on FESEM images, at 250sccm, hexagonal graphene formation was observed. Besides, optical properties can be seen by UV-Vis and as the results show that 250sccm is the highest reflectivity value. Consequently, graphene synthesis from WICO using various Argon gas flow rate as precursor is successfully demonstrated.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Zeolite RHO Synthesis Accelerated by Ultrasonic Irradiation Treatment

Ng TYS, Chew TL, Yeong YF, Jawad ZA, Ho CD

Sci Rep, 2019 10 21;9(1):15062.
PMID: 31636339 DOI: 10.1038/s41598-019-51460-x

In recent years, there are increasing interest on applying ultrasonic irradiation for the synthesis of zeolite due to its advantages including remarkable shortened synthesis duration. In this project, the potential of ultrasonic irradiation treatment on the synthesis of zeolite RHO was investigated. Ultrasonic irradiation treatment time was varied from 30 to 120 minutes for the synthesis of zeolite RHO. The zeolite RHO solid samples were characterized with X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Fourier Transform Infrared Spectroscopy (FTIR), Thermogravimetric Analysis (TGA) and nitrogen adsorption-desorption analysis. The application of ultrasonic irradiation treatment in this study has accelerated the synthesis of zeolite RHO where the synthesis duration has been significantly shortened to 2 days compared to 8 days required by conventional hydrothermal heating without ultrasonic irradiation treatment. Highly crystalline zeolite RHO crystals in truncated octahedron morphology were successfully formed.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext A New Sensor for Methyl Paraben Using an Electrode Made of a Cellulose Nanocrystal-Reduced Graphene Oxide Nanocomposite

Wan Khalid WEF, Mat Arip MN, Jasmani L, Lee YH

Sensors (Basel), 2019 Jun 18;19(12).
PMID: 31216625 DOI: 10.3390/s19122726

A new cellulose nanocrystal-reduced graphene oxide (CNC-rGO) nanocomposite was successfully used for mediatorless electrochemical sensing of methyl paraben (MP). Fourier-transform infrared spectroscopy (FTIR) and field-emission scanning electron microscopy (FESEM) studies confirmed the formation of the CNC-rGO nanocomposite. Cyclic voltammetry (CV) studies of the nanocomposite showed quasi-reversible redox behavior. Differential pulse voltammetry (DPV) was employed for the sensor optimization. Under optimized conditions, the sensor demonstrated a linear calibration curve in the range of 2 × 10-4-9 × 10-4 M with a limit of detection (LOD) of 1 × 10-4 M. The MP sensor showed good reproducibility with a relative standard deviation (RSD) of about 8.20%. The sensor also exhibited good stability and repeatability toward MP determinations. Analysis of MP in cream samples showed recovery percentages between 83% and 106%. Advantages of this sensor are the possibility for the determination of higher concentrations of MP when compared with most other reported sensors for MP. The CNC-rGO nanocomposite-based sensor also depicted good reproducibility and reusability compared to the rGO-based sensor. Furthermore, the CNC-rGO nanocomposite sensor showed good selectivity toward MP with little interference from easily oxidizable species such as ascorbic acid.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Antifouling Properties of PES Membranes by Blending with ZnO Nanoparticles and NMP⁻Acetone Mixture as Solvent

Ahmad AL, Sugumaran J, Shoparwe NF

Membranes (Basel), 2018 Dec 14;8(4).
PMID: 30558199 DOI: 10.3390/membranes8040131

In this study, the antifouling properties of polyethersulfone (PES) membranes blended with different amounts of ZnO nanoparticles and a fixed ratio of N-methyl-2-pyrrolidone (NMP)-acetone mixture as a solvent were investigated. The properties and performance of the fabricated membranes were examined in terms of hydrophilicity, porosity, pore size, surface and cross-section image using scanning electron microscopy (SEM), surface roughness using atomic force microscopy (AFM), pure water flux, and humic acid filtration. Addition of ZnO as expected was found to improve the hydrophilicity as well as to encourage pore formation. However, the agglomeration of ZnO at a higher concentration cannot be avoided even when dissolved in a mixed solvent. The presence of highly volatile acetone contributed to the tight skin layer of the membrane which shows remarkable antifouling ability with the highest flux recovery ratio and negligible irreversible fouling. ZnO NPs in acetone/NMP mixed solvent shows an improvement in flux and rejection, but, the fouling resistance was moderate compared to the pristine membrane.

Matched MeSH terms: Microscopy, Electron, Scanning
Fulltext Development of Nano-SiO2 and Bentonite-Based Mortars for Corrosion Protection of Reinforcing Steel

Karunarathne VK, Paul SC, Šavija B

Materials (Basel), 2019 Aug 17;12(16).
PMID: 31426501 DOI: 10.3390/ma12162622

In this study, the use of nano-silica (nano-SiO2) and bentonite as mortar additives for combating reinforcement corrosion is reported. More specifically, these materials were used as additives in ordinary Portland cement (OPC)/fly ash blended mortars in different amounts. The effects of nano-silica and bentonite addition on compressive strength of mortars at different ages was tested. Accelerated corrosion testing was used to assess the corrosion resistance of reinforced mortar specimens containing different amounts of nano-silica and bentonite. It was found that the specimens containing nano-SiO2 not only had higher compressive strength, but also showed lower steel mass loss due to corrosion compared to reference specimens. However, this was accompanied by a small reduction in workability (for a constant water to binder ratio). Mortar mixtures with 4% of nano-silica were found to have optimal performance in terms of compressive strength and corrosion resistance. Control specimens (OPC/fly ash mortars without any additives) showed low early age strength and low corrosion resistance compared to specimens containing nano-SiO2 and bentonite. In addition, samples from selected mixtures were analyzed using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). Finally, the influence of Ca/Si ratio of the calcium silicate hydrate (C-S-H) in different specimens on the compressive strength is discussed. In general, the study showed that the addition of nano-silica (and to a lesser extent bentonite) can result in higher strength and corrosion resistance compared to control specimens. Furthermore, the addition of nano-SiO2 can be used to offset the negative effect of fly ash on early age strength development.

Matched MeSH terms: Microscopy, Electron, Scanning
Experimental and first-principles DFT studies on the band gap behaviours of microsized and nanosized Zn(1-x)MnxO materials

Kasim MF, Darman AKAB, Yaakob MK, Badar N, Kamarulzaman N

Phys Chem Chem Phys, 2019 Sep 11;21(35):19126-19146.
PMID: 31432825 DOI: 10.1039/c9cp01664c

In this study, nano- and microsized zinc oxide (ZnO) materials were doped with different manganese (Mn) contents (1-5 mol%) via a simple sol-gel method. The structural, morphological, optical and chemical environments of the materials were investigated using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDX), UV-visible spectroscopy (UV-vis) and X-ray photoelectron spectroscopy (XPS). XRD results revealed that all synthesised materials were pure and single phased with a hexagonal wurtzite structure of ZnO. However, at a low annealing temperature, a nanorod-like shape can be obtained for all Zn(1-x)MnxO materials. In addition, EDX spectra confirmed the presence of Mn in the ZnO lattice and the atomic percentage was nearly equal to the calculated stoichiometry. UV-vis spectroscopy further revealed that materials in nano size exhibited band gap widening with an increase of the Mn content in the ZnO lattice. In contrast, micron state materials exhibited band gap narrowing with increasing Mn content up to 3% and then begin to widen when Mn > 3%. This is because the band gaps of these materials are affected by the dimensions of the crystals and the Mn content in the materials. Furthermore, XPS results revealed the existence of multiple states of Mn in all synthesised materials. By combining the information obtained from UV-vis and the XPS valence band, shifting in the valence band maximum (VBM) and conduction band minimum (CBM) was observed. Based on XPS results, the calculation of density functional theory studies revealed that the presence of Mn2+, Mn3+, and Mn4+ ions in the materials influences the band gap changes. It was also revealed that the nanosized Zn0.99Mn0.01O exhibited a higher photocatalytic activity than the other samples for degrading methylene blue (MB) dyes, owing to its smallest crystallite size.

Matched MeSH terms: Microscopy, Electron, Scanning
Control of microbiologically influenced corrosion using ultraviolet radiation

Akrima Abu Bakar, Muhammad Khairool Fahmy Mohd Ali, Norhazilan Md. Noor, Nordin Yahaya, Mardhiah Ismail, Ahmad Safuan A. Rashid

Sains Malaysiana, 2017;46:1323-1331.

Baram Delta Operation had been producing oil and gas since 1960's and serious pipelines failure was reported in the year of 2005. The final investigation has concluded that one of the species of bacteria that has been identified to cause microbiologically influenced corrosion, specifically known as sulfate reducing bacteria (SRB) was found to be one of the potential contributing factors to the incidents. This work investigates the potential use of ultraviolet (UV) radiation to inhibit the SRB consortium that was cultivated from the crude oil in one of the main trunk lines at Baram Delta Operation, Sarawak, Malaysia. The impact of UV exposure to bio-corrosion conditions on carbon steel coupon in certain samples for 28 days was discussed in this study. The samples were exposed to UV radiation based on variations of parameters, namely: time of UV exposure; and power of UV lamp. The significant changes on the amount of turbidity reading and metal loss of the steel coupon were recorded before and after experiment. The results showed that SRB growth has reduced rapidly for almost 90% after the UV exposure for both parameters as compared to the abiotic samples. Metal loss values were also decreased in certain exposure condition. Additionally, field emission scanning electron microscopy (FESEM) coupled with energy dispersive spectroscopy (EDS) was performed to observe the biofilm layer formed on the metal surface after its exposure to SRB. The evidence suggested that the efficiency of UV treatment against SRB growth could be influenced by the particular factors studied

Matched MeSH terms: Microscopy, Electron, Scanning
Effect of gamma irradiation on the physical stability of dppc liposomes

Liyana Mohd Ali Napia, Faizal Mohamed, Hur Munawar Kabir Mohd, Intan Syakeela Ahmad Bastamam, Shamellia Sharin, Norsyahidah Mohd Hidzir, et al.

Sains Malaysiana, 2018;47:1235-1240.

Unilamellar liposomes composed of dipalmitoylphosphatidylcholine (DPPC) were prepared by the reverse-phase
evaporation method and extrusion through a polycarbonate membrane filter. Liposomes at 0.7 mg/mL lipid concentration
in deionized water were exposed to gamma irradiation at a dose in the range 0.5 to 25 kGy. Gamma irradiation of
liposomes resulted in the degradation of DPPC lipids into free fatty acids, lysophosphatidylcholine and 1,2-palmitoylphosphatidic
acid (DPPA). The effect of gamma irradiation towards the physical stability of liposomes was investigated
by means of dynamic light scattering (DLS), transmission electron microscopy (TEM) and zeta potential analysis. From
the DLS analysis, no significant changes were observed in the hydrodynamic size of liposomes. TEM images indicate that
the liposomes surface became smoother and rounder as higher irradiation doses were applied. Zeta potential analysis
showed that gamma irradiation of DPPC liposomes at radiation doses as low as 0.5 kGy resulted in a drastic rise in the
magnitude of the zeta potential. The results also demonstrate that gamma irradiation of liposomes suspension enhanced
the overall stability of liposomes. Hence, it can be concluded that gamma irradiation on DPPC liposomes may potentially
produce liposomes with higher stability.

Matched MeSH terms: Microscopy, Electron, Transmission

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links