In this paper, the problem of steady laminar boundary layer flow of an incompressible viscous fluid over a moving thin needle is considered. The governing boundary layer equations were first transformed into non-dimensional forms. These non-dimensional equations were then transformed into similarity equations using the similarity variables, which were solved numerically using an implicit finite-difference scheme known as the Keller-box method. The solutions were obtained for a blunt-nosed needle. Numerical computations were carried out for various values of the dimensionless parameters of the problem which included the Prandtl number Pr and the parameter a representing the needle size. It was found that the heat transfer characteristics were significantly
influenced by these parameters. However, the Prandtl number had no effect on the flow characteristics due to the decoupled boundary layer equations.
Magnetic paper were prepared via the in situ synthesis method with ferrites in the presence of polyethylenimine (PEI). In this work, the thermomechanical pulp (TMP) fibers were used due to low percentage of collapse lumen and the large lumen size for optimum loading degree. Four cycles of the reaction were performed on the TMP fibers with pH values of 4-10. It was found that variation of pH value played an important role in the loading degree of pulp during synthesis process. The magnetic, morphological and structural properties of the magnetic paper obtained were reported. At the
optimum pH of 6.0, saturation magnetization was found to be 3.08 emu/g, remainance magnetization was 0.11 emu/g and coercive force was 12.64 Oe. The optimum loading degree was found to be 23.25%.
Precipitated calcium carbonate fillers were loaded into the lumen of bleached mixed tropical hardwood pulp using polyethylenimine (PEI) and alum. Our results indicated that the addition of (PEI) increased the degree of loading of precipitated calcium carbonate (PCC) into the lumen of fibers. The degree of loading also increased with the addition of alum together with PEI. The mechanical strengths of the produced lumen loaded paper increased with the addition of PEI and alum. Meanwhile the mechanical strength without alum had slightly increased the mechanical strengths of the paper. Electron micrographs revealed that the PCC fillers were successfully loaded into the lumen of the fibers.
In this paper, four types of circular probability distribution were used to evaluate which circular probability distribution gives the best fitting for southwesterly Malaysian wind direction data, namely circular uniform distribution, von Mises distribution, wrapped-normal distribution and wrapped-Cauchy distribution. The four locations chosen were Alor Setar, Langkawi, Melaka and Senai. Two performance indicators or goodness of fit tests which are mean circular distance and chord length were used to test which distribution give the best fitting.
A map on a group is not necessarily an automorphism on the group. In this paper we determined the necessary and sufficient conditions of a map on a split metacyclic p-group to be an automorphism, where we only considered p as an odd prime number. The metacyclic group can be defined by a presentation and it will be beneficial to have a direct relation between the parameters in the presentation and an automorphism of the group. We considered the action of an automorphism on the generators of the group mentioned. Since any element of a metacyclic group will be mapped to an element of the group by an automorphism, we can conveniently represent the automorphism in a matrix notation. We then used the relations and the regularity of the split metacyclic p-group to find conditions on each entry of the matrix in terms of the parameters in its presentation so that such a matrix does indeed represent an automorphism.
In this paper, the homotopy-perturbation method (HPM) is applied to obtain approximate analytical solutions for the Cauchy reaction-diffusion problems. HPM yields solutions in convergent series forms with easily computable terms. The HPM is tested for several examples. Comparisons of the results obtained by the HPM with that obtained by the Adomian decomposition method (ADM), homotopy analysis method (HAM) and the exact solutions show the efficiency of HPM.
This paper gives a comprehensive discussion on complex regression model by extending the idea of regression model to circular variables. Various aspect have been considered such as the biasness of parameters, error assumptions and model checking. The advantage of this approach is that it allows the use of usual technique available in ordinary linear regression for the regression of circular variables. The quality of the estimates and the feasibility of the approach were illustrated via simulation. The model was then applied to the wave direction data.
This paper utilizes the background oriented schlieren (BOS) technique to measure the velocity field of a variable density round jet. The density field of the jet is computed based on the light deflection created during the passage of light through the understudy jet. The deflection vector estimation was carried out using phase-based optical flow algorithms. The density field is further exploited to extract the axial and radial velocity vectors with the aid of continuity and energy equations. The experiment is conducted at six different jet-exit temperature values. Additional turbulence parameters, such as velocity variance and power spectral density of the vector field, are also computed. Finally, the measured velocity parameters are compared with the hot wire anemometer measurements and their correlation is displayed.
In the organosolv pulping of the oil palm fronds, the influence of the operational variables of the pulping reactor (viz. cooking temperature and time, ethanol and NaOH concentration) on the properties of the resulting pulp (yield and kappa number) and paper sheets (tensile index and tear index) was investigated using a wavelet neural network model. The experimental results with error less than 0.0965 (in terms of MSE) were produced, and were then compared with those obtained from the response surface methodology. Performance assessment indicated that the neural network model possessed superior predictive ability than the polynomial model, since a very close agreement between the experimental and the predicted values was obtained.
This paper reports the mechanical properties of cement composite boards made using wood-wool from a lesser known Malaysian timber species. A total of 108 specimens were fabricated using Portland cement (Type I) and wood-wool from Kelampayan (Neolamarckia cadamba). The cement to wood ratio of the specimens was 2 to 1 by weight. The aim of the study was to determine the density; flexural, compressive and tensile strength of wood-wool cement composite boards (WWCCB) by studying boards with wood-wool sized 1.5 mm, 2.5 mm and 3.5 mm and board thickness 25 mm, 50 mm and 75mm. The physical and mechanical properties of the boards were evaluated according to ASTM D 1037-96a (Standard testing method for evaluating properties of wood-based fibre and particle panel materials) and MS934:1986. Results showed that mechanical properties of WWCCB were greatly influenced by the density; as the density decreased, the mechanical strengths also decreased. However, the strength properties of the composite boards did not display a similar trend when subjected to different types of loading conditions. The compressive strength increased with thicker boards (50 mm and 75 mm) but the modulus of elasticity and modulus of rupture declined as the thickness of the board was increased.
This paper studies the use of gamma irradiation for textile waste water treatment. Prior to irradiation, the raw wastewa ter was diluted using tap water to targeted concentration of COD 400 mg/l. The sample was irradiated at selected dose between the ranges of 2kGy to 100kGy. The results showed that Irradiation was effective in removing the highly colored refractory organic pollutants. The COD removal at lowest dose, 2kGy is about 310 mg/l. Meanwhile, at highest dose, 1 00kGy the COD reduced to 100mg/l. The degree of removal influenced by the dose introduced during the treatment pro cess. As the dose increased, higher removal of organic pollutant was recorded. On the other hand, other properties of t he wastewater such as pH, turbidity, suspended solid, BOD and color shows tremendous changes as the dose increases. This shows the concentration of pollutants and dose of irradiation applied are directly proportional to each other.
Boundary element method (BEM) is a numerical technique that used for modeling infinite domain as is the case for galvanic corrosion analysis. The use of boundary element analysis system (BEASY) has allowed cathodic protection (CP) interference to be assessed in terms of the normal current density, which is directly proportional to the corrosion rate. This paper was present the analysis of the galvanic corrosion between Aluminium and Carbon Steel in natural sea water. The result of experimental was validated with computer simulation like BEASY program. Finally, it can conclude that the BEASY software is a very helpful tool for
future planning before installing any structure, where it gives the possible CP interference on any nearby unprotected metallic structure.
This paper presents the evaluation of integrated partial match query in Geographic Information Retrieval (GIR). To facilitate the evaluation, Kuala Lumpur tourist related data is used as test collection and is stored in SuperWeb, a map server. Then the map server is customized to enhance its query capability to recognize word in partial or case sensitive between layers of spatial data. Query keyword is tested using the system and results are evaluated using experiments on sample data. Findings show that integrated partial match query provides more flexibility to tourist in determining search results.
A Boolean permutation is called nonlinear if it has at least one nonlinear component function. All nonlinear Boolean permutations and their complements are called non-affine Boolean permutations. Any non-affine Boolean permutation is a potential candidate for bijective S-Box of block ciphers. In this paper, we find the number of n-variable non-affine Boolean permutations up to multiplicative n and show a simple method of construction of non-affine Boolean permutations. However, non-affinity property is not sufficient for S-Boxes. Nonlinearity is one of the basic properties of an S-Box. The nonlinearity of Boolean permutation is a distance between set of all non-constant linear combinations of component functions and set of all non-affine Boolean functions. The cryptographically strong S-Boxes have high nonlinearity. In this paper, we show a method of construction of 8-variable highly nonlinear Boolean permutations. Our construction is based on analytically design (8, 1), (8, 2), and (8, 3) highly nonlinear vectorial balanced functions and random permutation for other component functions.
In the present paper we provide a construction of Quantum Markov chain on a Cayley tree. Moreover, we give a concrete example of such chains, which is shift invariant and has the clustering property
Mass valuation of properties is important for purposes like property tax, price indices construction, and understanding market dynamics. There are several ways that the mass valuation can be carried out. This paper reviews the conventional MRA and several other advanced methods such as SAR, Kriging, GWR, and MWR. SAR and Kriging are good for modeling spatial dependence while GWR and MWR are good for modeling spatial heterogeneity. The difference between SAR and Kriging is the calculation of weights. Kriging weights are based on the spatial dependence or so called the semi-variogram analysis of the price data whereas the weights in SAR are based on the spatial contiguity between the sample data. MWR and GWR are special types of regression where study region is subdivided into local sections to increase the accuracy of prediction through neutralizing the heterogeneity of autocorrelations. MWR assigns equal weights for observations within a window while GWR uses distance decay functions. The merits and drawbacks of each method are discussed.
Shotcrete is a process where concrete is projected or “shot” under pressure, using a feeder or a
“gun” onto a surface to form structural shapes including walls, floors, and roofs. The surface can
be wood, steel, polystyrene, or any other surfaces that concrete can be projected onto. The surface
can be trowel led smooth while the concrete is still wet. Shotcrete has high strength, durability, low
permeability, excellent bond, and limitless shape possibilities. These properties allow shotcrete
to be used as a structural material in most cases. Although the hardened properties of shotcrete
are similar to conventional cast-in-place concrete, the nature of the placement process provides
additional benefits, such as excellent bond with most substrates and instant or rapid capabilities,
particularly on complex forms or shapes. In addition to building homes, shotcrete can also be used
to build pools. The practice of underground tunneling shows that the degree of stability of tunnels
is dependent on the state of the soil, rock mass, and shotcrete around the tunnel contour. The
development in the urban or suburban areas leads to the construction of tunnels in all kinds of soil
and rock. Meanwhile, the construction of tunnels in shallow depth or soft soils causes the ground
to displace. The determination of soil and rock mechanical properties to assess the stability of New
Austrian Tunnelling Method (NATM) tunnels and design the support system is one of the most
important steps in tunnelling. This paper provides information pertaining to the safety and increase
the stability of NATM tunnel before, during and after the operation of the tunnel. Therefore, the
shotcrete process is a recognized method for cemented sandy silt stabilization, with the aid of high
pressure shot concrete to increase the stability of tunnels.
One of the most interesting water management case studies in Iran is the case of Zayandehrud River, the main river that supplies water to Isfahan Province which is located in Gavkhuni River Basin (GRB). This paper examines the present and future demands for water and determines the extent to which water will be available for agricultural use by the year 2020. Although demand and supply conditions in 2000 were more or less in balance, there was an increase in the supply of some 28% by 2010 due to the completion of the third trans-basin diversion and the development of other local water sources. However, the demand exceeded its supply in 2010 and the basin fell into severe deficit. In this condition, the only way to keep supply and demand in balance is to reduce allocations to agriculture. By 2020, agriculture would only have 5% more water than the present and water supply is only 90% that of the normal, and this would then shrink from 2025 onwards. In other words, agriculture would have to be sacrificed in order to ensure full supplies of water for the other sectors. The scenarios examined reveal that a sustainable agriculture can only be accomplished by water saving practices and management measures, which may further lead to reduced demand, control supplies, and improve the efficiency of water use.
This paper studied the thermal behaviour of pineapple leaf fibre (PALF) reinforced high impact polystyrene (HIPS) composite. Thermogravimetric analysis (TGA) and differential scanning calorimetric (DSC) analysis were used to measure the thermal characteristic of HIPS/PALF composites. In particular, the TGA analysis was utilized to measure the degradation and decomposition of materials in neat polystyrene, pineapple fibre, and the composites. The measurements were carried out in the temperature of 25°C – 800°C, at a heating rate of 20°C min-1 and the nitrogen gas flow was 50 mL min-1. The temperature of the DSC analysis was programmed to be between 25°C – 300°C. The results from TGA analysis show that the addition of pineapple fibre has improved the thermal stability of the composites as compared to neat HIPS. In addition, the effects of compatibilising agent and surface modification of PALF with alkali treated were also determined and compared.
Maintenance is a vital system in a manufacturing company. The maintenance objectives are to ensure that the machine is in good condition, serviceable and safe to be operated in producing quality products. However, the system usually imposes a high cost system due to its ineffective activities. Therefore, this paper was written to review the factors affecting the maintenance effectiveness and methods used to measure its performance. In this paper, maintenance performance measurement methods are categorized into three groups, based on holistic, machine, and value factors. Each group is discussed based on the principles and techniques of the maintenance performance measurement methods, along with the example of its applications in the industry. The most common methods used are the holistic approach, overall equipment effectiveness (OEE), and balance score-card (BSC). These various methods have their own benefits and drawbacks, according to the area of measurement.