Displaying publications 61 - 80 of 188 in total

Abstract:
Sort:
  1. Ching SM, Cheong AT, Yee A, Thurasamy R, Lim PY, Zarina II, et al.
    Ir J Med Sci, 2024 Apr;193(2):851-863.
    PMID: 37556104 DOI: 10.1007/s11845-023-03483-7
    BACKGROUND: This study aimed to assess the determinants of burnout among healthcare providers in the primary care setting.

    METHODS: A web-based cross-sectional study was conducted among 1280 healthcare providers aged 18 years and older from 30 primary care clinics in Selangor, Malaysia. In this study, the Copenhagen Burnout Inventory was used to assess burnout. The results were analyzed using multiple logistic regression.

    RESULTS: The prevalence of personal burnout was 41.7%, followed by work-related burnout (32.2%) and client-related burnout (14.5%). The determinants for personal burnout in this study were younger age, being a doctor, higher COVID-19 exposure risk, do not know where to seek help, inability to handle stress, poorer sleep quality score, higher total COVID-19 fear score, higher total stress score, and lower total BRS score. The determinants of work-related burnout were younger age, being a doctor, longer years of working, higher COVID-19 exposure risk, do not know where to seek help, lower altruistic score, poorer sleep quality score, higher total stress score, and lower total brief resilience score (BRS) score. The determinants of client-related burnout were doctor, single/divorced, more than one attachment site, and higher satisfaction toward the infection control, inability to handle stress, higher total depression score, and lower total BRS score.

    CONCLUSION: Every fourth out of ten suffered from personal burnout, one-third from work-related burnout, and one-seventh from client-related burnout among healthcare providers during the COVID-19 pandemic. Healthcare systems must take care of healthcare workers' physical and emotional depletion, reducing the risk of burnout.

    Matched MeSH terms: Sleep Initiation and Maintenance Disorders*
  2. Tse LA, Wang C, Rangarajan S, Liu Z, Teo K, Yusufali A, et al.
    JAMA Netw Open, 2021 06 01;4(6):e2113775.
    PMID: 34190997 DOI: 10.1001/jamanetworkopen.2021.13775
    Importance: Obesity is a growing public health threat leading to serious health consequences. Late bedtime and sleep loss are common in modern society, but their associations with specific obesity types are not well characterized.

    Objective: To assess whether sleep timing and napping behavior are associated with increased obesity, independent of nocturnal sleep length.

    Design, Setting, and Participants: This large, multinational, population-based cross-sectional study used data of participants from 60 study centers in 26 countries with varying income levels as part of the Prospective Urban Rural Epidemiology study. Participants were aged 35 to 70 years and were mainly recruited during 2005 and 2009. Data analysis occurred from October 2020 through March 2021.

    Exposures: Sleep timing (ie, bedtime and wake-up time), nocturnal sleep duration, daytime napping.

    Main Outcomes and Measures: The primary outcomes were prevalence of obesity, specified as general obesity, defined as body mass index (BMI; calculated as weight in kilograms divided by height in meters squared) of 30 or greater, and abdominal obesity, defined as waist circumference greater than 102 cm for men or greater than 88 cm for women. Multilevel logistic regression models with random effects for study centers were performed to calculate adjusted odds ratios (AORs) and 95% CIs.

    Results: Overall, 136 652 participants (81 652 [59.8%] women; mean [SD] age, 51.0 [9.8] years) were included in analysis. A total of 27 195 participants (19.9%) had general obesity, and 37 024 participants (27.1%) had abdominal obesity. The mean (SD) nocturnal sleep duration was 7.8 (1.4) hours, and the median (interquartile range) midsleep time was 2:15 am (1:30 am-3:00 am). A total of 19 660 participants (14.4%) had late bedtime behavior (ie, midnight or later). Compared with bedtime between 8 pm and 10 pm, late bedtime was associated with general obesity (AOR, 1.20; 95% CI, 1.12-1.29) and abdominal obesity (AOR, 1.20; 95% CI, 1.12-1.28), particularly among participants who went to bed between 2 am and 6 am (general obesity: AOR, 1.35; 95% CI, 1.18-1.54; abdominal obesity: AOR, 1.38; 95% CI, 1.21-1.58). Short nocturnal sleep of less than 6 hours was associated with general obesity (eg, <5 hours: AOR, 1.27; 95% CI, 1.13-1.43), but longer napping was associated with higher abdominal obesity prevalence (eg, ≥1 hours: AOR, 1.39; 95% CI, 1.31-1.47). Neither going to bed during the day (ie, before 8pm) nor wake-up time was associated with obesity.

    Conclusions and Relevance: This cross-sectional study found that late nocturnal bedtime and short nocturnal sleep were associated with increased risk of obesity prevalence, while longer daytime napping did not reduce the risk but was associated with higher risk of abdominal obesity. Strategic weight control programs should also encourage earlier bedtime and avoid short nocturnal sleep to mitigate obesity epidemic.

    Matched MeSH terms: Sleep Initiation and Maintenance Disorders/etiology*; Sleep Initiation and Maintenance Disorders/epidemiology
  3. Boey, C.C.M.
    JUMMEC, 2010;13(1):3-11.
    MyJurnal
    In the last three centuries, medicine has focused predominantly on the physical body as the source of disease, placing very little importance on the mind. However, the significance of mind-body interactions in medicine is now increasingly being recognised. True health must include both the physical body and the mind. This article traces our concepts of the relationship between mind and body since primitive times and explores its relevance to the maintenance of health.
    Matched MeSH terms: Maintenance
  4. Nazatul, S.M., Saimy, I., Moy, F.M., Nabila, A.S.
    JUMMEC, 2008;11(2):66-71.
    MyJurnal
    The objective of this study was to determine the prevalence of sleep disturbance with work characteristics among nurses in the Melaka Hospital, Malacca, Malaysia. This was a cross sectional study conducted in Melaka Hospital. Universal sampling was conducted and a Malay version of the Pittsburgh Sleep Quality Index (PSQI) questionnaire was used in data collection. Socio-demographic characteristics such as age, marital status, number of children and work characteristics such as type of work schedule and duration were also enquired. Factors associated with poor sleep quality were compared between those nurses with good sleep quality by using logistic regression. There were 607 nurses who completed the questionnaire with a response rate of 73.1%. There was a moderate prevalence (57.8%) of poor sleep quality (PSQI > 5) in all study subjects. The prevalence of sleep disturbance was more widespread among nurses who worked shifts (62.0%) compared to non-shift working nurses (41.5%) p
    Matched MeSH terms: Sleep Initiation and Maintenance Disorders
  5. Choudhury, Shudipta
    JUMMEC, 2019;22(1):1-7.
    MyJurnal
    Background: The adoption of technologically advanced medical devices assisted healthcare providers to
    examine and treat diseases. However, technological advancements could increase the threats to safety,
    security, and reliability of the devices from complications associated with manufacturing, functionality, and
    the clinical application of the devices.

    Aim: To examine the safety threats, cost implication, and bioethical standards of the manufacturing processes
    and the functionality of advanced medical devices.

    Subject and Methods: The study was a narrative review through a qualitative research methodology. The
    secondary data was gathered from online databases including ProQuest, ResearchGate, CINAHL/EBSCOhost,
    PubMed, and ScienceDirect, from books, journals, conference proceedings, and other web publications
    between 2007 and 2017.

    Results:There were safety hazards from human errors in the interpretation and the use of the advanced medical
    devices. Equipment imperfections and poor processes of maintenance and procurement affected the effective
    functionality of these medical devices. Healthcare expenditure was high, Social and bioethical considerations,
    users’ complaints and post-market surveillance were essential in ensuring the safety of the devices and the
    maintenance of quality life for the users.

    Conclusion: Safety hazards and cost implications of the use of technologically advanced medical devices were
    significantly high Social and bioethical standards in the manufacturing of medical devices contributed towards
    the production of safer devices.
    Matched MeSH terms: Maintenance
  6. Das, Priscilla, Naing, NyiNyi, Nadiah Wan-Arfah, Naing Noor Jan, K.O., Yee, Cheng Kueh, Rasalingam, Kantha
    JUMMEC, 2019;22(1):50-57.
    MyJurnal
    Background: This paper investigates the quality of life of brain pathology patients in relation to their sociodemographic
    profiles and clinical factors.

    Methods: This is a cross-sectional study done at a tertiary referral hospital in Kuala Lumpur. A total of 100
    patients were recruited in the study after excluding 22 patients who did not met the exclusion criteria. The
    European Organisation for Research and Treatment of Cancer Quality of Life (EORTC QLQ-C30) self-administered
    questionnaire was utilized in the study. The Global health status/QoL, Physical functioning, Role functioning,
    Emotional functioning, Cognitive functioning, Social functioning, Fatigue, Nausea and vomiting, Pain, Dyspnoea,
    Insomnia, Appetite loss, Constipation, Diarrhoea, and Financial difficulties were assessed in this study.

    Results: The most severe impairment in functioning was with lowest score of cognitive functioning (mean
    score=61) and the most severe symptom was fatigue (mean score=45). There were significant differences in
    quality of life scores in different socio-demographic groupsand types of brain pathology patients. Patients aged
    below 40 years old or less had better physical functioning, less symptoms of fatigue and insomnia compared
    to patients who were more than 40 years old. Male patients faced more financial difficulties compared with
    female patients. Patients who were married had increased insomnia compared to the single patients. Employed
    patients had better physical functioning and less financial difficulties compared with patients who were
    unemployed. Patients who earned >RM 2500.00 monthly had better physical functioning, less symptoms of pain and less financial difficulties than patients who earned ≤RM 2500.00. Patients with qualifications lower
    than SPM tended to face more financial difficulties compared to patients with qualifications of SPM or higher.
    Meningioma patients had better social functioning compared with others, whereas Carvenoma patients had
    better physical functioning. Meningioma patients had more symptoms of insomnia compared with other
    patients. All the findings were with p value less than 0.05.

    Conclusion: The quality of life of patients with brain pathology is affected by socio-demographic factors and
    clinical diagnoses. Efforts should be made to improve the overall quality of life of these patients.
    Matched MeSH terms: Sleep Initiation and Maintenance Disorders
  7. Mohd Aliff Farhan Musa, Rafizah Musa
    MyJurnal
    Low-cost high rise housing project is developed to provide a chance for low-income
    citizen to own a house at a lower market price. Each low-cost high-rise residential
    building possesses its own building management body where one of its duties is to
    manage residential area after the strata title has been issued to the purchaser. The
    study was carried out to evaluate the level of satisfaction among residents of one lowcost
    housing area towards the maintenance activities administered by the building
    management body. This research employed mixed-method approach; quantitative and
    qualitative, as it able to capture accurate data from both residents and the building
    management body. This study concluded that the residents of Rumah Selangorku
    Damai Utama are mostly leaning towards dissatisfaction with the building and facilities
    maintenance services provided by the building management body.
    Matched MeSH terms: Maintenance
  8. Syahrul Affandi Saidi, Syarifah Idrus Sofia Syed Mohd Yamin, Mohd Sharizan Md Sarip, Wan Azani Mustafa
    MyJurnal
    In Malaysia, it is estimated that almost 80 percent of the world's population today used palm oil in their daily lives. Malaysia is the second country exporting palm oil, about 39 percent of world palm oil output. Besides that, Malaysia also recorded about 44 per cent of world exports, making the palm industry very important for countries other than rubber and cocoa. However, to keep the palm industry running smoothly and constantly, there are many challenges to face. One is to maintain soil fertility because the soil can affect the growth of oil palm trees. With the use of this system, it will show the condition of soil behaviour to the farmer about the treatment given. Arduino board is used in this project which it is programmed to calculate and display the level of soil condition by using temperature sensor and soil moisture sensors as an input. This sensor will detect the level of soil moisture and temperature and it is easier for farmers to monitor the soil conditions. Controlled soil conditions can improve the soil's ability to maintain the fertility of palm trees and help plant growth suit to the weather and local climate.
    Matched MeSH terms: Maintenance
  9. Ilanur Muhaini Mohd Noor, Muhamad Kamal Mohammed Amin
    MyJurnal
    This paper aim is to design an education kit for wastewater system that can maintain
    the standard parameters of neutralized wastewater by maintaining the suitable pH
    (Potential Hydronium) level and temperature of the wastewater from industry by using
    fuzzy controller. This study is capable to control the unwanted bacteria by automatic
    regulatory and monitoring the temperature, pH and water level. Fuzzy logic method is
    use to control and monitor pH level as well as the temperature during clarifying process
    because pH control process is a complex physical-chemistry process of strong
    individuality of time-varying and non-linearity properties. Pumps used in the prototype
    need to be controlled precisely to enable either acid or base to be pumped into mix
    tank of the wastewater treatment. The control and monitoring system, which has been
    designed through LabVIEW front panel will ease end user in inspection of the
    parameters involve in wastewater treatment. The entire system output could be
    observed remotely in Data Dashboard application in smartphone or tablet. The GUI
    was designed and interfaced with the prototype constructed to carry out the process
    of controlling and monitoring the required parameters. Few tests were conducted
    repetitively to analyse the performance of the system parameters. It was found that
    the controlled set point fixed within the range of pH 7.6-8.4, temperature 25-29.44
    Celsius and water level of 20cm in this research that was effectively achieved in the
    entire test conducted. In addition, the wastewater system accuracy and performance
    is 96.72% and 90.22% respectively.
    Matched MeSH terms: Maintenance
  10. Firdaus Sukarman, Mohd Ghazali Mohd Hamami, Mazleenda Mazni, Muhammad Amir Mat Shah, Ahmad Faidzal Khodori
    MyJurnal
    The utilization of parallelogram structure in a small-sized humanoid robot consists of two parallel platforms that are linked serially in each leg. The thigh and shank of each leg consists of two servomotors as actuator and linked in parallel platform. By using parallel mechanism in leg structure, foot sole surface is always parallel to the walking surface at any point. Even it looks unnatural to human-like walking motion, the expected result is the robot can maintain it posture while walking and at the point foot sole touch the walking surface, unnecessary vibrates can be modulated at the certain level to remain its balance. The effectiveness and the performance of the proposed parallel platforms are experimented by using zero moment point (ZMP) method by taking various scenario data from pressure sensors attached at the footsole. Planned walking gait is introduced to be identical in terms of foot steps length and width of each leg swing. As the results, in terms of load in each actuator, required torque at servomotors can be reduced because two servomotors are used simultaneously in one parallel system. Stable walking gait can be predicted as the quantity of error falls within the error ranges from the published walking gait patterns.
    Matched MeSH terms: Maintenance
  11. Nurul Azreen Hashim, Norley Shuib, Salina Mohamed, Ling SL, Khariah Mat Nor
    Delayed neuropsychiatric sequelae is an important condition which commonly occur during recovery from acute carbon monoxide poisoning. Typical presentation would be apathy, disorientation, amnesia, hypokinesia, bizarre behavior, insomnia and neurological manifestations such as gait disturbance, hypertonia and tremor. We report here a case of a man presented with delayed neuropsychiatric sequelae one month after the carbon monoxide poisoning in his suicidal attempt. He presented with the typical presentation and diagnosis confirmed with the MRI findings. His MRI showed abnormal signal in subcortical hemisphere white matter of both temporo-fronto-parietal-occipital regions along the insula and both globus pallidus. He was treated with Olanzapine, Fluvoxamine, Chlorpromazine and Levodopa and his condition slowly improved. It is important for clinicians to recognize the symptoms and risk factors to develop delayed neuropsychiatric sequelae in patients who previously had carbon monoxide poisoning.
    Matched MeSH terms: Sleep Initiation and Maintenance Disorders
  12. Mohammad Fazley Hossain, Chowdhury, Rusli, Bin Ahmad
    MyJurnal
    Like many other parts of the globe, in Malaysia, construction industry has a vital support to
    the national economy, even though statistics indicates that, at the same time, it is an extremely
    risky profession due to high accident rate. In addition, current evidences suggest that, in
    general, safety in Sarawak construction industries lack attention. As, human behavior is regarded
    as the principal component that contributes to accidents in this industry, this study
    intends to explore existing barriers in development and maintaining safety performance behavior
    as well as possible coping strategies. A qualitative analysis of in-depth interview (N=4)
    among different levels of professions within industries in Kuching, Sarawak reveals that,
    price sensitive subcontracting, short-term projects, irregular cash flow, dependency on larger
    companies, less managerial and supervisory engagement, and priority on progress alone create
    obstacles for safety behavior. On the other hand, possibly, the challenges can be managed
    through integration of safety into contracts as compliance, associated disbursement, and introducing
    incentives.
    Matched MeSH terms: Maintenance
  13. Buzayan MM, Yunus NB
    J Indian Prosthodont Soc, 2014 Mar;14(1):16-23.
    PMID: 24604993 DOI: 10.1007/s13191-013-0343-x
    One of the considerable challenges for screw-retained multi-unit implant prosthesis is achieving a passive fit of the prosthesis' superstructure to the implants. This passive fit is supposed to be one of the most vital requirements for the maintenance of the osseointegration. On the other hand, the misfit of the implant supported superstructure may lead to unfavourable complications, which can be mechanical or biological in nature. The manifestations of these complications may range from fracture of various components in the implant system, pain, marginal bone loss, and even loss of osseointegration. Thus, minimizing the misfit and optimizing the passive fit should be a prerequisite for implant survival and success. The purpose of this article is to present and summarize some aspects of the passive fit achieving and improving methods. The literature review was performed through Science Direct, Pubmed, and Google database. They were searched in English using the following combinations of keywords: passive fit, implant misfit and framework misfit. Articles were selected on the basis of whether they had sufficient information related to framework misfit's related factors, passive fit and its achievement techniques, marginal bone changes relation with the misfit, implant impression techniques and splinting concept. The related references were selected in order to emphasize the importance of the passive fit achievement and the misfit minimizing. Despite the fact that the literature presents considerable information regarding the framework's misfit, there was not consistency in literature on a specified number or even a range to be the acceptable level of misfit. On the other hand, a review of the literature revealed that the complete passive fit still remains a tricky goal to be achieved by the prosthodontist.
    Matched MeSH terms: Maintenance
  14. Parithimarkalaignan S, Padmanabhan TV
    J Indian Prosthodont Soc, 2013 Mar;13(1):2-6.
    PMID: 24431699 DOI: 10.1007/s13191-013-0252-z
    Osseointegration, defined as a direct structural and functional connection between ordered, living bone and the surface of a load-carrying implant, is critical for implant stability, and is considered a prerequisite for implant loading and long-term clinical success of end osseous dental implants. The implant-tissue interface is an extremely dynamic region of interaction. This complex interaction involves not only biomaterial and biocompatibility issues but also alteration of mechanical environment. The processes of osseointegration involve an initial interlocking between alveolar bone and the implant body, and later, biological fixation through continuous bone apposition and remodeling toward the implant. The process itself is quite complex and there are many factors that influence the formation and maintenance of bone at the implant surface. The aim of this present review is to analysis the current understanding of clinical assessments and factors that determine the success & failure of osseointegrated dental implants.
    Matched MeSH terms: Maintenance
  15. Zainudin Jaafar, Mukhlis Mokhtar, Abu Bakar Mhd Ghazali
    MyJurnal
    Personal computer (PC) based user interface for equipment control and data acquisition from the nuclear counting system to count nuclear radiation energy from radioactive sources have been developed at Malaysian Nuclear Agency. Effort is made to ensure a good reliability of the system for nuclear counting, especially neutrons particles and gamma rays. It will be used in laboratory for testing and maintenance of nuclear spectrometry instruments. Personal computer is used to control the operation of equipment and data acquisition from counter/timer module. Control and data communication between PC and the Counter/ Timer is made through the USB' to RS 232 converter terminal. The program for this system was written using Labview 8.6 software on Windows XP environment. This system has been successfully tested using a pulse generator to simulate the detector signal for calibration and then followed by actual measurement using HE-3 detector.
    Matched MeSH terms: Maintenance
  16. Masitah Alias, Zaini Hamzah
    MyJurnal
    The growing concern over the workers safety and health has lead many factories and organizations do the air monitoring to ensure the airborne at their workplace is safe for the worker’s health and complying the Occupational Safety and Health Act 1994 (Act 514). In this study, the monitoring covers an indoor air quality and chemical exposure to the workers in one of the power plant repair shop. A few workers from different sections namely blasting, welding, grinding, fitting and maintenance area were chosen to assist in the personal monitoring for 8 hours measurement. PM10 were measured at a few sampling points to collect dusts for 24 hours duration. The samples were brought back to the laboratory for gravimetric and SEM-EDAX analysis. The results were certainly exceed the limit for air quality, and many elements were detected such as Fe, Ni, Al, Si, Ca, K, Ba, S, Cr, Zn and Cl. The present of these elements shows that exposure to these particulate matters is quite risky and some measure needs to be taken for remedial action.
    Matched MeSH terms: Maintenance
  17. Nasri A. Hamid, Yusof Abdullah, Mohd Sharul Nizam Asbullah
    MyJurnal
    Among the challenges for superconducting devices to be applied in industry are the need for high transport critical current density (Jr) and sustainability of the device in different environment. For superconducting material to maintain high 4, effective flux pinning centers are needed. The addition of small size MgO particles in bulk Bi2Sr2CaCu2O8 (Bi-2212) superconductor has been proven to enhance the effective flux pinning centers in the superconducting material. Nevertheless, the flux pinning properties of the superconducting materials may change if they are exposed to radioactive environment. Electron irradiation is one of the common techniques that can be used to study the impact of irradiation on superconducting materials. In this work, a small amount of nanosize MgO particles were used as the flux pinning centers for Bi-2212 superconducting material. The Bi-2212/MgO composite was heat treated and followed by partial melting and slow cooling. Some of the samples were subjected to electron irradiation using the facility at the Malaysian Nuclear Agency. Characterizations of non-irradiated and irradiated samples were performed via X-ray Diffraction Patterns (XRD), Scanning Electron Microscopy (SEM) and measurements of J, dependence on temperature in self-field. Higher J, indicates better flux pinning properties in irradiated superconductor composite. This is achieved if defects with larger radius with dimension comparable to the coherence length of the superconducting material were created. On the other hand, decreased in Je indicates ineffective flux pinning and this is attributed to the overlapping of defects that break the superconducting region. Our study showed that electron irradiation deteriorated the flux pinning properties of the Bi-2212/MgO superconductor composite.
    Matched MeSH terms: Maintenance
  18. Mohd Fazli Zakaria, Lanyau, Tonny, Mohamad Fauzi Saad, Ahmad Razali Ismail
    MyJurnal
    Ageing management is one of the important safety factors to be implemented proactively throughout the lifetime of a research reactor. In order to continue the safe operation of a research reactor from the reactor safety standpoint, a systematic and methodical approach should be taken. In practice, ageing management programme is accomplished by integrating the existing programmes including maintenance, periodic testing and inspection and periodic safety reviews. Such approach will be a good platform for the reactor operation
    and maintenance group to utilize data from existing maintenance programme to be incorporate into the ageing maintenance system. This paper will describe the ageing management programme for Reactor TRIGA PUSPATI (RTP).
    Matched MeSH terms: Maintenance
  19. Amir Abdullah, M.D., Leman, A.M., Norhidayah, A., Syafiq Syazwan, M.M.
    MyJurnal
    A poor Indoor Air Quality (IAQ) is a crucial problem which produces by the improper maintenance of Mechanical Ventilation and Air Conditioning (MVAC) ducting. A budget constraint intimidates for the practise of monitoring of the MVAC ducting. Thus IAQ measurements were conducted at the room where the air supplied by centralized air conditioning. It has been performed at four different offices that supply by two different Air Handling Unit (AHU). Walkthrough survey was conducted and the area samplings were selected for data collection. This paper examines the result of comparison of air ducting and air quality at academic office building, Universiti Tun Hussein Onn Malaysia (UTHM). The parameters involved were Temperature (°C), Relative Humidity (RH), Carbon Dioxide (CO2) and Carbon Monoxide (CO). Pictures were also captured to demonstrate the real conditions inside the ducting by using Mechanical Robot. Thus, duct cleaning was recommended to be an exceptional platform for the IAQ improvement.
    Matched MeSH terms: Maintenance
  20. Amir Abdullah, M.D., Abdullah, A.H., Leman, A.M.
    MyJurnal
    Indoor air quality has been a major public concern recently. Several health effects are related to this problem.
    Findings from several studies have shown MVAC system as the main contributor for IAQ problem. Good practice of
    maintenance and servicing is important to maintain MVAC system, especially the filter. Good air filtration for MVAC
    system is needed to make sure adequate air is received by the occupants. This paper illustrated a recent study of air
    filtration for MVAC system especially for several industries that used MVAC system in their premises. This paper also
    proposed an air filtration study for a better air quality. Several Acts and Regulations related to Safety and Health were
    identified to create the framework for the proposed study. Air filtration technique was used in this preliminary study
    to set up guidelines to create safe and clean indoor spaces for workers and occupants.
    Matched MeSH terms: Maintenance
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links