MyMedR

Displaying publications 61 - 80 of 230 in total

Abstract:

Sort:

Daily roadside BTEX concentrations in East Asia measured by the Lanwatsu, Radiello and Ultra I SKS passive samplers

Lan TT, Binh NT

Sci Total Environ, 2012 Dec 15;441:248-57.
PMID: 23142415 DOI: 10.1016/j.scitotenv.2012.08.086

A new home-made diffusive bag-type passive sampler called Lanwatsu was developed for benzene, toluene, ethylbenzene and xylene monitoring in roadside air. The passive samplers were outdoor validated and deployed together with two commercial passive samplers, Ultra I SKC Inc. and Radiello, for daily roadside air monitoring in East Asian cities including HoChiMinh, Hanoi, Cantho, Danang, Vungtau, Hue (Vietnam), Kuala Lumpur (Malaysia), Kyoto, Osaka (Japan), Nanjing (China) and Singapore in 2011. High daily benzene concentrations of 87, 52, 32, 23, 13, 12 and 48 µg/m³ were observed in HoChiMinh, Hanoi, Cantho, Danang, Hue, Vung Tau (Vietnam), and Kuala Lumpur (Malaysia), respectively. Kyoto and Osaka (Japan) were clean with daily benzene concentrations below 2.3 μg/m³. The daily benzene concentrations in Nanjing (China) and Singapore were 5.6 and 6.9 μg/m³, respectively. The three passive samplers were equivalent. Passive sampling by the Lanwatsu passive sampler is acceptable for daily outdoor benzene monitoring.

Matched MeSH terms: Cities
Data for in-situ industrial site characterization with the applications of combined subsurface and surface mapping

Arifin MH, Kayode JS, Azahar MA, Jamil H, Sabri SFA

Data Brief, 2018 Jun;18:1864-1868.
PMID: 29904689 DOI: 10.1016/j.dib.2018.04.119

The paper presents the data from the surface and subsurface mapping of this area for the purpose of siting industrial city in the area. The field data collected combine with the borehole data was to successfully apply these to solving geological, environmental and engineering complications posed by the complexity of the subsurface geological structures underlain this area. The Electrical Resistivity, (ER) and Induced Polarization, (IP) data were initially processed using RES2DINV software model to generate the depth to the lithological units together with topographic correction. The 2-D ER and IP data were collected from 23rd April 2017 up until 7th May 2017 covering a total of about 17.6 km along 44 survey lines using ABEM Terrameter SAS4000 for the field measurement. A total of 20 Borehole logs data were recorded to better characterized in-situ, the subsurface geological formations emplaced in the study area. The study area is located at Bagan Datuk, Perak Darul Ridzuan situated on Latitude 2° 44.653'N and Longitudes 104° 28.79' E along the west coast Peninsula Malaysia. The topography of the area is generally flat low-laying and elevation range from about 0 m to 32 m above mean sea level (MSL).

Matched MeSH terms: Cities
Fulltext Dataset on specific UV absorbances (SUVA254) at stretch components of Perak River basin

Abd Manan TSB, Khan T, Wan Mohtar WHM, Beddu S, Mohd Kamal NL, Yavari S, et al.

Data Brief, 2020 Jun;30:105518.
PMID: 32382595 DOI: 10.1016/j.dib.2020.105518

Perak River basin is in Perak state of Peninsular Malaysia. In this research, the river stretch serves as water intake for domestic, agricultural and industrial purposes in Perak Tengah, Hilir Perak and Manjung regions. It is located in mixed use area whilst exposing the river to anthropogenic elements. The sampling locations were conducted at selected points of Perak River namely Tanjung Belanja Bridge (TBB), Water Treatment Plant Parit (WTPP), Parit Town discharge (PTD), Water Treatment Plant Senin (WTPS) and Water Treatment Plant Kepayang (WTPK). The existence of aromatic hydrocarbons in freshwater samples was pre-assessed via qualification analysis; specific ultraviolet absorbance (SUVA254) method at 254 nm of wavelength. The SUVA dataset were 48.38 L/mg-m (TBB), 50.54 L/mg-m (WTPP), 8.05 L/mg-m (PTD), 85.75 L/mg-m (WTPS) and 217.39 L/mg-m (WTPK). The SUVA254 values of fresh water at the river basin have exceeded the water quality standards value equivalent to 2.0 L/mg-m permitted by the Environmental Protection Agency of United States. The exceeding values were an indication of a large portion of aromatic compounds in the water. Qualification analyses evident the existence of water pollutants at treacherous concentrations for public health in freshwater samples of Perak River basin. Thus, this research has presented important findings towards further research and countermeasure for a better alternative of water treatment in Malaysia.

Matched MeSH terms: Cities
Fulltext Dataset on the green consumption behaviour amongst Malaysian consumers

Ghani NAM, Yusop FD, Kamarulzaman Y

Data Brief, 2020 Oct;32:106302.
PMID: 32995394 DOI: 10.1016/j.dib.2020.106302

This dataset contains information of 375 respondents on green consumption behaviour. The questionnaire was developed using Theory of Planned Behaviour as the foundation. The variables available in the dataset are Environmental Concern (EC), Social Influence (SI), Perceived behavioural control (PBC), Consumer novelty seeking (CNS) and Green consumption behaviour (GC). In addition to the variables related to green consumption, the dataset also includes demographic and media preference information of the respondents. The data was collected via self-administered questionnaire in seven major cities in Klang Valley, namely Shah Alam, Bangsar, Petaling Jaya, Subang Jaya, Puchong, Serdang and Putrajaya. The dataset can have an important role for research in consumer behaviour towards developing green consumers.

Matched MeSH terms: Cities
Fulltext Debate on the paper by Diez Roux

Capon A, Siri J

Cad Saude Publica, 2015 Nov;31 Suppl 1:21-2; discussion 22-3.
PMID: 26648359 DOI: 10.1590/0102-311XCO06S115
Matched MeSH terms: Cities*
Decarbonization in waste recycling industry using digitalization to promote net-zero emissions and its implications on sustainability

Kurniawan TA, Othman MHD, Liang X, Goh HH, Gikas P, Kusworo TD, et al.

J Environ Manage, 2023 Jul 15;338:117765.
PMID: 36965421 DOI: 10.1016/j.jenvman.2023.117765

Digitalization and sustainability have been considered as critical elements in tackling a growing problem of solid waste in the framework of circular economy (CE). Although digitalization can enhance time-efficiency and/or cost-efficiency, their end-results do not always lead to sustainability. So far, the literatures still lack of a holistic view in understanding the development trends and key roles of digitalization in waste recycling industry to benefit stakeholders and to protect the environment. To bridge this knowledge gap, this work systematically investigates how leveraging digitalization in waste recycling industry could address these research questions: (1) What are the key problems of solid waste recycling? (2) How the trends of digitalization in waste management could benefit a CE? (3) How digitalization could strengthen waste recycling industry in a post-pandemic era? While digitalization boosts material flows in a CE, it is evident that utilizing digital solutions to strengthen waste recycling business could reinforce a resource-efficient, low-carbon, and a CE. In the Industry 4.0 era, digitalization can add 15% (about USD 15.7 trillion) to global economy by 2030. As digitalization grows, making the waste sector shift to a CE could save between 30% and 35% of municipalities' waste management budget. With digitalization, a cost reduction of 3.6% and a revenue increase of 4.1% are projected annually. This would contribute to USD 493 billion in an increasing revenue yearly in the next decade. As digitalization enables tasks to be completed shortly with less manpower, this could save USD 421 billion annually for the next decade. With respect to environmental impacts, digitalization in the waste sector could reduce global CO2 emissions by 15% by 2030 through technological solutions. Overall, this work suggests that digitalization in the waste sector contributes net-zero emission to a digital economy, while transitioning to a sustainable world as its social impacts.

Matched MeSH terms: Cities
Fulltext Dengue in Dhaka, Bangladesh: Hospital-based cross-sectional KAP assessment at Dhaka North and Dhaka South City Corporation area

Abir T, Ekwudu O, Kalimullah NA, Nur-A Yazdani DM, Al Mamun A, Basak P, et al.

PLoS One, 2021;16(3):e0249135.
PMID: 33784366 DOI: 10.1371/journal.pone.0249135

Dengue, the most important mosquito-borne viral disease of humans is a recurring global health problem. In Bangladesh, dengue outbreaks are on the increase despite the efforts of government and it is not clear what the understanding of the general Dhaka population towards dengue fever is. Knowledge, attitude and practice (KAP) studies are essential guides in public health interventions. Hence, using KAP, this study aims to assess patient-perspectives with regards to factors associated with dengue, as well as investigate the associated factors between the two corporations in Dhaka. A Hospital-based cross-sectional study of 242 fever patients from two city-corporations in Dhaka (Dhaka North City Corporations, DNCC (n = 91, 37.6%) and Dhaka South City Corporation, DSCC (n = 151, 62.4%) was conducted using pre-tested KAP items. Wilcoxon's Rank Sum was used to determine the KAP by DNCC, DSCC and both corporations and multivariate Poisson regression analyses. The two corporations were analysed separately due to the differences in income distribution, concentration of slums, hospitals and clinics. The study found that more than half of the study population were knowledgeable about dengue (mean percentage scores was 52%), possess an appropriate and acceptable attitude towards the disease (69.2%), and about two thirds of the respondents (71.4%) engaged in practices towards its prevention. After adjusting for the potential cofounders, the factors associated with KAP about dengue fever varied between DNCC and DSCC; with duration of residency and use of mosquito nets were associated with knowledge in the north while income class and age were associated with knowledge and attitude in the south. In the pooled analysis (combining both corporations), knowledge of dengue was associated with good practice towards dengue fever among the respondents. The duration of residence in Dhaka (10+ years), not using mosquito nets and length of time spent in the hospital (7+ days) due to dengue, and decreased knowledge (Adjusted coefficient (β) = -0.01, 95%CI: -0.02, -0.01) were associated with attitude towards dengue in DNCC. On the other hand, middle-high income class, age (40+ years) and increased knowledge were associated with practice towards dengue in DSCC (β = 0.02, 95%CI: 0.01, 0.03). Efforts to increase knowledge about dengue fever through education by the administrations of both corporations would benefit from targeting these high-risk groups for a more sustainable outcome.

Matched MeSH terms: Cities/epidemiology; Cities/statistics & numerical data
Dengue, an emerging arboviral infection in Assam, northeast India

Dev V, Mahanta N, Baruah BK

Trop Biomed, 2015 Dec 01;32(4):796-799.
PMID: 33557473

Dengue is emerging as major public health concern in northeast India and spreading with increased morbidity. Most cases were recorded in Guwahati metropolitan city of the state of Assam during post-monsoon months (September- December). These comprised all age groups of both sexes with significantly higher incidence of cases in adult males aged 26- 60 years.

Matched MeSH terms: Cities
Fulltext Detecting dengue outbreaks in Malaysia using geospatial techniques

Nellis S, Loong SK, Abd-Jamil J, Fauzi R, AbuBakar S

Geospat Health, 2021 11 03;16(2).
PMID: 34730321 DOI: 10.4081/gh.2021.1008

Dengue is a complex disease with an increasing number of infections worldwide. This study aimed to analyse spatiotemporal dengue outbreaks using geospatial techniques and examine the effects of the weather on dengue outbreaks in the Klang Valley area, Kuala Lumpur, Malaysia. Daily weather variables including rainfall, temperature (maximum and minimum) and wind speed were acquired together with the daily reported dengue cases data from 2001 to 2011 and converted into geospatial format to identify whether there was a specific pattern of the dengue outbreaks. The association between these variables and dengue outbreaks was assessed using Spearman's correlation. The result showed that dengue outbreaks consistently occurred in the study area during a 11-year study period. And that the strongest outbreaks frequently occurred in two high-rise apartment buildings located in Kuala Lumpur City centre. The results also show significant negative correlations between maximum temperature and minimum temperature on dengue outbreaks around the study area as well as in the area of the high-rise apartment buildings in Kuala Lumpur City centre.

Matched MeSH terms: Cities
Fulltext Detection and Mitigation of RPL Rank and Version Number Attacks in the Internet of Things: SRPL-RP

A Almusaylim Z, Jhanjhi NZ, Alhumam A

Sensors (Basel), 2020 Oct 22;20(21).
PMID: 33105891 DOI: 10.3390/s20215997

The rapid growth of the Internet of Things (IoT) and the massive propagation of wireless technologies has revealed recent opportunities for development in various domains of real life, such as smart cities and E-Health applications. A slight defense against different forms of attack is offered for the current secure and lightweight Routing Protocol for Low Power and Lossy Networks (RPL) of IoT resource-constrained devices. Data packets are highly likely to be exposed in transmission during data packet routing. The RPL rank and version number attacks, which are two forms of RPL attacks, can have critical consequences for RPL networks. The studies conducted on these attacks have several security defects and performance shortcomings. In this research, we propose a Secure RPL Routing Protocol (SRPL-RP) for rank and version number attacks. This mainly detects, mitigates, and isolates attacks in RPL networks. The detection is based on a comparison of the rank strategy. The mitigation uses threshold and attack status tables, and the isolation adds them to a blacklist table and alerts nodes to skip them. SRPL-RP supports diverse types of network topologies and is comprehensively analyzed with multiple studies, such as Standard RPL with Attacks, Sink-Based Intrusion Detection Systems (SBIDS), and RPL+Shield. The analysis results showed that the SRPL-RP achieved significant improvements with a Packet Delivery Ratio (PDR) of 98.48%, a control message value of 991 packets/second, and an average energy consumption of 1231.75 joules. SRPL-RP provided a better accuracy rate of 98.30% under the attacks.

Matched MeSH terms: Cities
Fulltext Determination of Leptospira borgpetersenii serovar Javanica and Leptospira interrogans serovar Bataviae as the persistent Leptospira serovars circulating in the urban rat populations in Peninsular Malaysia

Benacer D, Mohd Zain SN, Sim SZ, Mohd Khalid MK, Galloway RL, Souris M, et al.

Parasit Vectors, 2016;9:117.
PMID: 26927873 DOI: 10.1186/s13071-016-1400-1

Leptospirosis is an emerging infectious disease of global significance, and is endemic in tropical countries, including Malaysia. Over the last decade, a dramatic increase of human cases was reported; however, information on the primary vector, the rat, and the Leptospira serovars circulating among the rat population is limited. Therefore, the present study was undertaken to isolate Leptospira and characterise the serovars circulating in the urban rat populations from selected main cities in Peninsular Malaysia.

Matched MeSH terms: Cities
Fulltext Determination of lead, cations, and anions concentration in indoor and outdoor air at the primary schools in Kuala Lumpur

Awang N, Jamaluddin F

J Environ Public Health, 2014;2014:408275.
PMID: 25136371 DOI: 10.1155/2014/408275

This study was carried out to determine the concentration of lead (Pb), anions, and cations at six primary schools located around Kuala Lumpur. Low volume sampler (MiniVol PM10) was used to collect the suspended particulates in indoor and outdoor air. Results showed that the concentration of Pb in indoor air was in the range of 5.18 ± 1.08 μg/g-7.01 ± 0.08 μg/g. All the concentrations of Pb in indoor air were higher than in outdoor air at all sampling stations. The concentrations of cations and anions were higher in outdoor air than in indoor air. The concentration of Ca(2+) (39.51 ± 5.01 mg/g-65.13 ± 9.42 mg/g) was the highest because the cation existed naturally in soil dusts, while the concentrations of NO3 (-) and SO4 (2-) were higher in outdoor air because there were more sources of exposure for anions in outdoor air, such as highly congested traffic and motor vehicles emissions. In comparison, the concentration of NO3 (-) (29.72 ± 0.31 μg/g-32.00 ± 0.75 μg/g) was slightly higher than SO4 (2-). The concentrations of most of the parameters in this study, such as Mg(2+), Ca(2+), NO3 (-), SO4 (2-), and Pb(2+), were higher in outdoor air than in indoor air at all sampling stations.

Matched MeSH terms: Cities
Fulltext Devastating urban flooding and dengue outbreak during the COVID-19 pandemic in Pakistan

Junaid Tahir M, Rizwan Siddiqi A, Ullah I, Ahmed A, Dujaili J, Saqlain M

Med J Islam Repub Iran, 2020;34:169.
PMID: 33816368 DOI: 10.47176/mjiri.34.169

Pakistan has recently been overwhelmed by extreme torrential rains, with its most populous city of Karachi experiencing its worst floods in almost a century. Poor flood control and water disposal facilities have led to an immense risk of another dengue outbreak, with multiple cases being reported recently. The enormous accumulation of stagnant water in urban areas is a major source of mosquito breeding and transmission. Historical data has shown the correlation between the number of dengue cases and average rainfall in the region. The monsoon rains have pounded at a time where health authorities are battling to contain the Coronavirus (COVID-19) pandemic. There is a need to implement centralized dengue control strategies to undertake large scale water drainage, sanitation, and disinfection drives in disaster-stricken areas alongside public health awareness programs to combat the after-effects of this natural calamity.

Matched MeSH terms: Cities
Fulltext Development of a Novel Design and Subsequent Fabrication of an Automated Touchless Hand Sanitizer Dispenser to Reduce the Spread of Contagious Diseases

Das A, Barua A, Mohimin MA, Abedin J, Khandaker MU, Al-Mugren KS

Healthcare (Basel), 2021 Apr 10;9(4).
PMID: 33920290 DOI: 10.3390/healthcare9040445

BACKGROUND: The use of a touchless automated hand sanitizer dispenser may play a key role to reduce contagious diseases. The key problem of the conventional ultrasonic and infra-red-based dispensers is their malfunctioning due to the interference of sunlight, vehicle sound, etc. when deployed in busy public places. To overcome such limitations, this study introduced a laser-based sensing device to dispense sanitizer in an automated touchless process.
METHOD: The dispensing system is based on an Arduino circuit breadboard where an ATmega328p microcontroller was pre-installed. To sense the proximity, a light-dependent resistor (LDR) is used where the laser light is to be blocked after the placement of human hands, hence produced a sharp decrease in the LDR sensor value. Once the LDR sensor value exceeds the lower threshold, the pump is actuated by the microcontroller, and the sanitizer dispenses through the nozzle.
RESULTS AND DISCUSSION: A novel design and subsequent fabrication of a low-cost, touchless, automated sanitizer dispenser to be used in public places, was demonstrated. The overall performance of the manufactured device was analyzed based on the cost and power consumption, and environmental factors by deploying it in busy public places as well as in indoor environment in major cities in Bangladesh, and found to be more efficient and cost-effective compared to other dispensers available in the market. A comprehensive discussion on this unique design compared to the conventional ultrasonic and infra-red based dispensers, is presented to show its suitability over the commercial ones. The guidelines of the World Health Organization are followed for the preparation of sanitizer liquid. A clear demonstration of the circuitry connections is presented herein, which facilitates the interested individual to manufacture a cost-effective dispenser device in a relatively short time and use it accordingly. Conclusion: This study reveals that the LDR-based automated hand sanitizer dispenser system is a novel concept, and it is cost-effective compared to the conventional ones. The presented device is expected to play a key role in contactless hand disinfection in public places, and reduce the spread of infectious diseases in society.

Matched MeSH terms: Cities
Development of extraction procedures for the analysis of polycyclic aromatic hydrocarbons and organochlorine pesticides in municipal sewage sludge

Ahmad UK, Ujang Z, Woon CH, Indran S, Mian MN

Water Sci Technol, 2004;50(9):137-44.
PMID: 15581005

Land application of sludge as fertilizers is a way of disposal and recycling of sludge. However, public concern has arisen due to the fact that organic contaminants in sludge may ultimately enter the food chain. Hence the need arises to analyse the organic contaminants such as PAHs and OCPs in sludge. In this study, Soxhlet was utilised as the extraction method and the extracts subjected to extensive cleanup via either silica columns or solid phase extraction cartridges prior to analysis using gas chromatography or high performance liquid chromatography. Sludge samples were collected from the drying beds of oxidation ponds in three locations in South Johore. OCPs such as heptachlor, dieldrin and pp-DDT were detected in low amounts (52-159 mg/kg) whereas PAHs such as naphthalene, phenanthrene, fluoranthene and benzo(a)pyrene were detected in the range of 0.2-5.5 mg/kg dry mass. Subcritical water extraction (SWE) recovery studies of PAHs were also performed from spiked sludge samples. Although a recovery range of 41-68% was obtained using the SWE method, the results indicated the usefulness of the technique as an alternative to Soxhlet extraction for the analysis of PAHs in sludge samples.

Matched MeSH terms: Cities
Fulltext Distribution of Angiostrongylus vasorum and its gastropod intermediate hosts along the rural-urban gradient in two cities in the United Kingdom, using real time PCR

Aziz NA, Daly E, Allen S, Rowson B, Greig C, Forman D, et al.

Parasit Vectors, 2016;9:56.
PMID: 26830203 DOI: 10.1186/s13071-016-1338-3

Angiostrongylus vasorum is a highly pathogenic metastrongylid nematode affecting dogs, which uses gastropod molluscs as intermediate hosts. The geographical distribution of the parasite appears to be heterogeneous or patchy and understanding of the factors underlying this heterogeneity is limited. In this study, we compared the species of gastropod present and the prevalence of A. vasorum along a rural-urban gradient in two cities in the south-west United Kingdom.

Matched MeSH terms: Cities
Distribution of linear alkylbenzenes (LABs) in riverine and coastal environments in South and Southeast Asia

Isobe KO, Zakaria MP, Chiem NH, Minh le Y, Prudente M, Boonyatumanond R, et al.

Water Res, 2004 May;38(9):2448-58.
PMID: 15142807

This paper reports the result of sewage pollution monitoring conducted in South and Southeast Asia during 1998-2003 using linear alkylbenzenes (LABs) as molecular tracers of sewage contamination. Eighty-nine water samples collected from Malaysia, Vietnam, and Japan (Tokyo), and 161 surface sediment samples collected from Tokyo, Thailand, Malaysia, Philippines, Vietnam, Cambodia, Indonesia, and India were analyzed for alkylbenzenes. The concentration range of SigmaLABs in river water particles in Southeast Asia (<0.005-0.913 microg/L) was comparable to or higher than those found in Tokyo (<0.005-0.638 microg/L). I/E ratios (a ratio of internal to external isomers of LABs) in tropical Asian waters were close to the value of LABs in raw sewage ( approximately 1) and much lower than those in secondary effluents (3-5). This suggests that untreated or inadequately treated sewage is discharged into the water. SigmaLABs concentrations in sediments from South and Southeast Asia ranged from <0.002-42.6 microg/g-dry with the highest concentration occurring at several populous cities. Low I/E ratios of the sediments with high SigmaLABs concentrations suggest a heavy load of untreated sewage. Clearly in view of the current data and evidence of the implications of sewage pollution, this paper highlights the necessity of the continuation of water treatment system improvement in tropical Asia.

Matched MeSH terms: Cities
Distribution of polycyclic aromatic hydrocarbons (PAHs) in rivers and estuaries in Malaysia: a widespread input of petrogenic PAHs

Zakaria MP, Takada H, Tsutsumi S, Ohno K, Yamada J, Kouno E, et al.

Environ Sci Technol, 2002 May 1;36(9):1907-18.
PMID: 12026970

This is the first publication on the distribution and sources of polycyclic aromatic hydrocarbons (PAHs) in riverine and coastal sediments in South East Asia where the rapid transfer of land-based pollutants into aquatic environments by heavy rainfall and runoff waters is of great concern. Twenty-nine Malaysian riverine and coastal sediments were analyzed for PAHs (3-7 rings) by gas chromatography mass spectrometry. Total PAHs concentrations in the sediment ranged from 4 to 924 ng/g. Alkylated homologues were abundant for all sediment samples. The ratio of the sum of methylphenanthrenes to phenanthrene (MP/P), an index of petrogenic PAHs contribution, was more than unity for 26 sediment samples and more than 3 for seven samples for urban rivers covering a broad range of locations. The MP/P ratio showed a strong correlation with the total PAHs concentrations, with an r2 value of 0.74. This ratio and all other compositional features indicated that Malaysian urban sediments are heavily impacted by petrogenic PAHs. This finding is in contrast to other studies reported in many industrialized countries where PAHs are mostly of pyrogenic origin. The MP/P ratio was also significantly correlated with higher molecular weight PAHs such as benzo[a]pyrene, suggesting unique PAHs source in Malaysia which contains both petrogenic PAHs and pyrogenic PAHs. PAHs and hopanes fingerprints indicated that used crankcase oil is one of the major contributors of the sedimentary PAHs. Two major routes of inputs to aquatic environments have been identified: (1) spillage and dumping of waste crankcase oil and (2) leakage of crankcase oils from vehicles onto road surfaces, with the subsequent washout by street runoff. N-Cyclohexyl-2-benzothiazolamine (NCBA), a molecular marker of street dust, was detected in the polluted sediments. NCBA and other biomarker profiles confirmed our hypothesis of the input from street dust contained the leaked crankcase oil. The fingerprints excluded crude oil, fresh lubricating oil, asphalt, and tire-particles as major contributors.

Matched MeSH terms: Cities
Distributions and health risks of polycyclic aromatic hydrocarbons (PAHs) in atmospheric aerosols of Kuala Lumpur, Malaysia

Omar NY, Mon TC, Rahman NA, Abas MR

Sci Total Environ, 2006 Oct 1;369(1-3):76-81.
PMID: 16766020

The concentrations and distributions of particle bound polycyclic aromatic hydrocarbons (PAHs) collected over a 10 month period in ambient environment, at street levels as well as during a hazy episode are reported. Ambient and street level distributions of PAHs were similar and their occurrence was attributed to vehicular emissions. However, in haze particles, a different pattern of PAHs was observed, characterized by relatively low levels of benzo[a]pyrene (BaP) and high levels of benzofluoranthenes (BFs). The BaP equivalency results showed that the potential health risk associated with haze smoke particles was 4 times higher than that of street level particles whereas the lowest health risk was associated with ambient atmospheric particles.

Matched MeSH terms: Cities
Diurnal models of traffic-generated CO for Penang, Malaysia

Koh HL, Lim PE

Environ Monit Assess, 1991 Oct;19(1-3):373-82.
PMID: 24233954 DOI: 10.1007/BF00401326

Georgetown of Penang, an old city, is noted for its narrow streets. The existing traffic dispersal system is utterly inadequate to cope with the ever increasing number of cars and motorcycles on the road. The principal objective of this study is to build prediction models of CO to be employed as one of the planning tools in the future design of Penang urban traffic dispersal system. This study involves the monitoring of kerbside CO levels at selected sites and the fitting of hourly-averaged CO data to linear regression models incorporating the residual effect of CO emission due to traffic in the earlier periods and also different categories of vehicles. The best overall regression model appears to be the one based upon the total traffic count of motorcycles. This can be accounted for by the fact that the traffic counts of motorcycles and cars are highly correlated in most cases and that the emissions of CO from motorcycles are more readily detected as they travel closer to the kerb. The inclusion of residual CO in the models significantly improves the correlation coefficient from about 0.4 to about 0.7.

Matched MeSH terms: Cities

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links