In this study, iron impregnated activated carbon (FeAC) was synthesized following an oxidation and iron impregnation of activated carbon (AC). Both the AC and FeAC were characterized by pHZPC and FTIR spectroscopy. The removal of Methylene Blue (MB) by AC and FeAC was examined under various experimental conditions. The FeAC showed up to 95% (higher than AC) MB removal in the pH range of 7-10. Although the reaction kinetics was pseudo-second order, the overall rate was controlled by a number of processes such as film diffusion, pore diffusion and intraparticle diffusion. The activation energy values for the MB uptake by AC and FeAC (21.79 and 14.82 kJ/mol, respectively) revealed a physisorption process. In the regeneration study, FeAC has shown consistently ≥ 90% MB removal even up to 10 repeated cycles. The reusable characteristic of the spent FeAC improved the practical use of activated carbon and can be a breakthrough for continuous flow system applications where it can work effectively without any significant reduction in its performance.
Matched MeSH terms: Water Pollutants, Chemical/isolation & purification*; Water Pollutants, Chemical/chemistry; Water Purification
The structural and hydrodynamic features for granules were characterized using settling experiments, predefined mathematical simulations and ImageJ-particle analyses. This study describes the rheological characterization of these biologically immobilized aggregates under non-Newtonian flows. The second order dimensional analysis defined as D2=1.795 for native clusters and D2=1.099 for dewatered clusters and a characteristic three-dimensional fractal dimension of 2.46 depicts that these relatively porous and differentially permeable fractals had a structural configuration in close proximity with that described for a compact sphere formed via cluster-cluster aggregation. The three-dimensional fractal dimension calculated via settling-fractal correlation, U∝l(D) to characterize immobilized granules validates the quantitative measurements used for describing its structural integrity and aggregate complexity. These results suggest that scaling relationships based on fractal geometry are vital for quantifying the effects of different laminar conditions on the aggregates' morphology and characteristics such as density, porosity, and projected surface area.
Matched MeSH terms: Water Purification/methods*; Waste Water/chemistry*
The impact of floating net cages culturing the seabass, Lates calcarifer, on planktonic processes and water chemistry in two heavily used mangrove estuaries in Malaysia was examined. Concentrations of dissolved inorganic and particulate nutrients were usually greater in cage vs. adjacent (approximately 100 m) non-cage waters, although most variability in water-column chemistry related to water depth and tides. There were few consistent differences in plankton abundance, production or respiration between cage and non-cage sites. Rates of primary production were low compared with rates of pelagic mineralization reflecting high suspended loads coupled with large inputs of organic matter from mangrove forests, fishing villages, fish cages, pig farms and other industries within the catchment. Our preliminary sampling did not reveal any large-scale eutrophication due to the cages. A crude estimate of the contribution of fish cage inputs to the estuaries shows that fish cages contribute only approximately 2% of C but greater percentages of N (32-36%) and P (83-99%) to these waters relative to phytoplankton and mangrove inputs. Isolating and detecting impacts of cage culture in such heavily used waterways--a situation typical of most mangrove estuaries in Southeast Asia--are constrained by a background of large, highly variable fluxes of organic material derived from extensive mangrove forests and other human activities.
Matched MeSH terms: Water/chemistry*; Water Pollutants/analysis*
In the title 1/2/2 adduct, C(4)H(12)N(2)(2+) x 2C(6)H(3)N(2)O(5)(-) x 2H(2)O, the dication lies on a crystallographic inversion centre and the asymmetric unit also has one anion and one water molecule in general positions. The 2,4-dinitrophenolate anions and the water molecules are linked by two O-H...O and two C-H...O hydrogen bonds to form molecular ribbons, which extend along the b direction. The piperazine dication acts as a donor for bifurcated N-H...O hydrogen bonds with the phenolate O atom and with the O atom of the o-nitro group. Six symmetry-related molecular ribbons are linked to a piperazine dication by N---H.O and C---H.O hydrogen bonds.
The ability of Pycnoporus sanguineus to adsorb heavy metals from aqueous solution was investigated in fixed-bed column studies. The experiments were conducted to study the effect of important design parameters such as column bed height, flow rate and initial concentration of solution. The breakthrough profiles were obtained in these studies. A mathematical model based on external mass transfer and pore diffusion was used for the prediction of mass transfer coefficient and effective diffusivity of metals in macro-fungi bed. Experimental breakthrough profiles were compared with the simulated breakthrough profiles obtained from the mathematical model. Bed Depth Service Time (BDST) model was used to analyse the experimental data and evaluated the performance of biosorption column. The BDST model parameters needed for the design of biosorption columns were evaluated for lead, copper and cadmium removal in the column. The columns were regenerated by eluting the metal ions using 0.1 M hydrochloric acid solution after the adsorption studies. The columns were subjected to repeated cycles of adsorption of same metal ions and desorption to evaluate the removal efficiency after adsorption-desorption.
Matched MeSH terms: Water Pollutants, Chemical*; Water Purification/methods*
The title molecule, C(13)H(13)N(3)O(3).H(2)O, is in the form of a monohydrated zwitterion. The tetrahydropyridinium ring adopts an envelope conformation and is nearly coplanar with the plane of the imidazoline ring. The water solvate molecule plays an important role as a bridge between zwitterions, forming molecular chains running along the c direction, which are interconnected by N-H.O hydrogen bonds into molecular ribbons. The crystal packing is further stabilized by another N-H.O and one O-H.N hydrogen bond, which interconnect the molecular ribbons.
In the title adduct, 1,3,5,7-tetraazatricyclo[3.3.1.1(3,7)]decane-4-nitrobenzene-1,2-diol-water (1/2/1), C(6)H(12)N(4).2C(6)H(5)NO(4).H(2)O, the hexamethylenetetramine molecule acts as an acceptor of intermolecular O-H.N hydrogen-bonding interactions from the water molecule and the hydroxy groups of one of the two symmetry-independent 4-nitrocatechol molecules. The structure is built from molecular layers which are stabilized by three intermolecular O-H.O, two intermolecular O-H.N and four intermolecular C-H.O hydrogen bonds. The layers are further interconnected by one additional intermolecular O-H.N and two intermolecular C-H.O hydrogen bonds.
The rate of formation and disappearance of phthalic anhydride (PAn) intermediate in the aqueous cleavage of N-methoxyphthalamic acid (NMPA) under acidic pH was studied spectrophotometrically in mixed CH3CN-H2O solvents. The rate of formation of PAn from NMPA is almost independent of the change in acetonitrile content from 20 to 70% v/v in mixed aqueous solvents. The rate constants for the formation of PAn from NMPA are approximately 10-fold smaller than the corresponding rate constants for the formation of PAn from o-carboxybenzohydroxamic acid (OCBA). These observations are ascribed to the consequence of the occurrence of slightly different mechanisms in these reactions.
In the title compound, [Zn(CH3COO)2(C4H8N2S)2]*H2O, the Zn atom is tetrahedrally coordinated in the ZnO2S2 form. N-H...O and O-H...O intramolecular and intermolecular hydrogen bonds are formed by the four N atoms and the water molecule. N-H...O intermolecular hydrogen bonds and C-H...S and C-H...O intermolecular interactions interconnect columns formed by the molecules into layers. Adjacent layers are then linked by other N-H...O and O-H...O intermolecular hydrogen bonds to form a three-dimensional framework throughout the structure. The orientations of the acetate planes are such that the Zn atom lies within them.
The crystal structure of the title compound, C(15)H(14)N(2)O(2). H(2)O, is in the keto tautomeric form and the configuration at the azomethine C=N double bond is E. The molecule is non-planar, with a dihedral angle of 27.3 (1) degrees between the aromatic rings. The crystal structure is stabilized by extensive hydrogen bonding involving the water molecule and hydrazone moiety.
The H2S water screening test and the membrane filtration faecal coliform count were compared with Escherichia coli counts for water samples collected from household water sources and domestic drinking water in rural Malaysia. Water samples were taken from 151 wells, 44 taps supplying water from the treated municipal supply and 192 domestic stored water supplies. E. coli were detected in 20% of the samples (42% of wells, 7% of tap water and 6% of drinking water). Excellent correlation (Spearman's rank correlation rs = 0.93) was found between the faecal coliform and E. coli counts for all sample types. The H2S method was poorly correlated whether read at 18 or 30 h. False positive rates were highest for well water, and false negative rates were highest for both well and drinking water samples, with low E. coli counts. The faecal coliform test was an excellent predictor of the presence of E. coli in these water samples, while the H2S test was very inadequate.
Matched MeSH terms: Water Microbiology/standards*; Water Supply/standards*
The sorption of Cu(II) and Cd(II) from synthetic solution by powdered activated carbon (PAC), biomass, rice husk (RH) and activated rice husk (ARH) were investigate under batch conditions. After activated by concentrated nitric acid for 15 hours at 60-65 degrees C, the adsorption capacity for RH was increased. The adsorbents arranged in the increasing order of adsorption capacities to the Langmuir Q degree parameter were biomass > PAC > ARH > RH. The addition of adsorbents in base mix solution had increased the specific oxygen uptake rate (SOUR) activated sludge microorganisms with and without the presence of metals. The increased of SOUR were due to the ability of PAC and RH in reducing the inhibitory effect of metals on microorganisms and provide a reaction site between activated sludge microorganisms and substrates.
Matched MeSH terms: Water Pollutants/isolation & purification*; Water Pollution/prevention & control
Response surface methodology-Box–Behnken design (RSM-BBD) was employed to optimize the methyl orange (MO) dye removal efficiency from aqueous solution by cross-linked chitosan-tripolyphosphate/nano-titania compsite (Chi-TPP/NTC). The influence of pertinent parameters, i.e. A: TiO2 loading (0- 50 %), B: dose (0.04-0.14 g), C: pH (4-10), and D: temperature (30-50 oC) on the MO removal efficiency were tested and optimized using RSM-BBD. The F-values of BBD model for MO removal efficiency was 93.4 (corresponding p-value < 0.0001). The results illustrated that the highest MO removal efficiency (87.27 %) was observed at the following conditions: TiO2 loading (50% TiO2), dose (0.09 g), pH = 4.0, and temperature of 40 oC.
The purpose of this study is to explore the emulsion liquid membrane stability for acetaminophen (ACTP) removal from aqueous solution. In this work, the membrane phase was prepared by dissolving trioctylamine (TOA) with kerosene and Span80. The stability of the emulsion in terms of emulsion size, membrane breakage, and its efficiency in removing ACTP was considered for the optimization of parameters. Investigation on the stability of emulsion was carried out by manipulating the concentration of stripping agent, agitation speed, extraction time, and treat ratio. The best condition to produce a very stable emulsion was achieved at 0.1 M of stripping agent concentration, with 300 rpm of agitation speed for 3 min of extraction time with a treat ratio of 3:1. Eighty-five percent of ACTP successfully stripped into the emulsion with minimum membrane breakage of 0.17% through this experiment.
Lead contamination present in wastewater is one of the major problems due to its toxicity and persistence. This issue increased dramatically and led to the environmental and health concerns worldwide. Therefore, this study aims to remove lead from synthetic wastewater effluent by adsorption process. In this study, nanomaterial called graphene oxide (GO) is used as an adsorbent due to its mechanical strength and high surface area. The parameters were optimized using Fractional factorial design under response surface method. GO demonstrates high adsorption capacity, qmax = 500 mg/g at 100 mg/L of initial lead concentration and at optimum pH 9. Adsorption isotherm of lead was also investigated to evaluate the adsorption capacity. The equilibrium data of graphene oxide adsorption was better represented by the Langmuir isotherm and was achieved within 60 minutes. The results showed that GO has potential to be an important adsorbent for lead removal. In the future, GO might be imbedded as adsorbent in the membrane fabrication for wastewater treatment.
Cross-linked chitosan-epichlorohydrin was prepared for the adsorption of Reactive Red 4 (RR4).
Response surface methodology (RSM) with 3–level Box-Behnken design (BBD) was employed to
optimize the RR4 dye removal efficiency from aqueous solution. The adsorption key parameters that were selected such as adsorbent dose (A: 0.5 – 1.5 g), pH (B: 4 – 10) and time (30 – 80 min). The F-value of BBD model for RR4 removal efficiency was 185.36 (corresponding p-value < 0.0001). The results illustrated that the highest RR4 removal efficiency (70.53%) was obtained at the following conditions: adsorbent dose (1.0 g), pH 4 and time of 80 min.
Fibres from banana’s stem are abundantly available in Malaysia. This study focused on the production
of woven fabric from banana pseudo-stem fibres. Yarn made of 100% banana stem and 100% cotton
yarn were produced. Two types of retting techniques were conducted, which are water retting and
retting using softening agent. The fibres were spun and weaved into plain weave fabric. All specimens
were evaluated for yarn twist, yarn evenness, yarn linear density and selected fabric physical
properties. The results obtained showed that banana stem fabric treated with softening agent has lower
area density and higher thickness. Weft sample retted in softening agent has higher bending length and
flexural rigidity than sample retted in water. This might be due to the decrement of yarn’s stiffness,
which eases the insertion of yarn during shedding process. Weft sample retted in water has lower
bending length due to coarser yarn and tends to break easily. It is found that retting banana stem fibres
with softening agent affect the yarn linear density, area density, fabric stiffness properties and flexural
rigidity of the fabric.
Access to improved water and sanitation is essential. We describe these practices in Malaysia using data from a nationwide community survey and used logistic regression to assess the determinants. Of the 7978 living quarters (LQs), 58.3% were in urban areas. About 2.4%, 0.5% and 27.4% of LQs had non-improved water sources, non-improved toilet types and improper domestic waste disposal, respectively. Open burning was practiced by 26.1%. Water source was a problem for long houses (10.5%), squatters (8.5%) and shared houses (4.0%). Non-improved toilet types were 11.9% for squatters and 4.8% for shared houses. Improper domestic waste disposal practices were higher for occupants of village houses (64.2%), long houses (54.4%), single houses (45.8%) and squatters (35.6%). An increase in education or income level was associated with a decrease in improper domestic waste disposal methods. House type significantly affected water and sanitation after adjusting for the effects of other variables. Lower household income was associated with non-improved toilet types and improper domestic waste disposal. Lower education and rural location influenced domestic waste disposal. The water and toilet facilities in Malaysia were generally good, while domestic waste management practices could be improved. There remain pockets of communities with environmental challenges for the nation.
Matched MeSH terms: Water Supply*; Drinking Water*
In this paper, we review various novel/modified interfacial polymerization (IP) techniques for the fabrication of polyamide (PA) thin film composite (TFC)/thin film nanocomposite (TFN) membranes in both pressure-driven and osmotically driven separation processes. Although conventional IP technique is the dominant technology for the fabrication of commercial nanofiltration (NF) and reverse osmosis (RO) membranes, it is plagued with issues of low membrane permeability, relatively thick PA layer and susceptibility to fouling, which limit the performance. Over the past decade, we have seen a significant growth in scientific publications related to the novel/modified IP techniques used in fabricating advanced PA-TFC/TFN membranes for various water applications. Novel/modified IP lab-scale studies have consistently, so far, yielded promising results compared to membranes made by conventional IP technique, in terms of better filtration efficiency (increased permeability without compensating solute rejection), improved chemical properties (crosslinking degree), reduced surface roughness and the perfect embedment of nanomaterials within selective layers. Furthermore, several new IP techniques can precisely control the thickness of the PA layer at sub-10 nm and significantly reduce the usage of chemicals. Despite the substantial improvements, these novel IP approaches have downsides that hinder their extensive implementation both at the lab-scale and in manufacturing environments. Herein, this review offers valuable insights into the development of effective IP techniques in the fabrication of TFC/TFN membrane for enhanced water separation.