Displaying publications 121 - 140 of 190 in total

Abstract:
Sort:
  1. Rughubar V, Vares Y, Singh P, Filipsky A, Creanga A, Iqbal S, et al.
    J Oral Maxillofac Surg, 2020 Oct;78(10):1781-1794.
    PMID: 32589939 DOI: 10.1016/j.joms.2020.05.012
    PURPOSE: We aimed to compare complication rates and functional outcomes in patients with bilateral mandibular fractures treated with different degrees of internal fixation rigidity.

    PATIENTS AND METHODS: This international, multicenter randomized controlled trial included adults with bilateral mandibular fractures located at either the angle and body, angle and symphysis, or body and symphysis. Patients were treated with either a combination of rigid fixation for the anterior fracture and nonrigid fixation for the posterior fracture (mixed fixation) or nonrigid fixation for both fractures. The primary outcome was complications within 6 weeks after surgery. Secondary outcomes were complications within 3 months, Helkimo dysfunction index, and mandibular mobility at 6 weeks and 3 months after surgery.

    RESULTS: Of the 315 patients enrolled, 158 were randomized to the mixed fixation group and 157 to the nonrigid fixation group. The overall complication rate at 6 weeks in the intention-to-treat population was 9.6% (95% confidence interval [CI], 5.3% to 15.6%) in the mixed fixation group and 7.8% (95% CI, 4.0% to 13.5%) in the nonrigid fixation group. With an unadjusted odds ratio of 1.25 (95% CI, 0.51 to 3.17), there were no statistically significant differences in complication rates between the 2 groups (P = .591). A multivariable model for complication risk at 6 weeks found no significant differences between treatment groups, but patients with moderate or severe displacement had a higher complication rate than those with no or minimal displacement (adjusted odds ratio, 4.58; 95% CI, 1.16 to 18.06; P = .030). There were no significant between-group differences in complication rates at 3 months. Moreover, no significant differences in Helkimo dysfunction index and mandibular mobility index at 6 weeks and 3 months were found between groups according to treatment allocated and treatment received.

    CONCLUSIONS: A combination of rigid and nonrigid fixation in patients with bilateral mandibular fracture has similar complication rates and functional outcomes to nonrigid fixation for both fractures.

    Matched MeSH terms: Mandible
  2. Siriwardena BSMS, Udagama MNGP, Tennakoon TMPB, Athukorala DAADW, Jayasooriya PR, Tilakaratne WM
    PMID: 32782125 DOI: 10.1016/j.bjorl.2020.06.004
    INTRODUCTION: The adenomatoid odontogenic tumor is a relatively uncommon odontogenic neoplasm representing about 4.7% of all odontogenic tumors.

    OBJECTIVE: The aim of this study was to determine the demographic and clinical profile of the adenomatoid odontogenic tumors in a Sri Lankan population.

    METHODS: Data gathered from the cases received for a period of 38 years from the Department of Oral Pathology, Faculty of Dental Sciences, University of Peradeniya. Request forms, biopsy reports and electronic data base of the department were used to obtain relevant information. Demographic data including age, gender and location of the tumor were included in the analysis.

    RESULTS: Out of 116 cases of adenomatoid odontogenic tumor, the mean age was 21.02 ± 11.24. It occurs more fre quently in the second decade of life, more prevalent in females, most often associated with the maxilla, predominantly affecting anterior jaw bones and presenting mostly in the right side of the jaw bone. The results from the present study showed the statistically significant relationship with site of occurrence (maxilla/mandible) and age (p  0.05).

    CONCLUSIONS: Adenomatoid odontogenic tumor occurs more frequently in the second decade of life with a significant female predominance and the commonest site is anterior maxilla. This study revealed few differences on demographic and clinical presentations of adenomatoid odontogenic tumor from some regions of the world.

    Matched MeSH terms: Mandible
  3. Etajuri EA, Suliman E, Mahmood WAA, Ibrahim N, Buzayan M, Mohd NR
    Dent Med Probl, 2021 1 16;57(4):359-362.
    PMID: 33448161 DOI: 10.17219/dmp/123976
    BACKGROUND: There is very little literature available on the reliability of the rapid prototyping technology in the production of three-dimension (3D)-printed surgical guides for accurate implant placement.

    OBJECTIVES: The aim of the study was to evaluate the deviation of implant placement performed with a surgical guide fabricated by means of the rapid prototyping technique (the PolyJet™ technology).

    MATERIAL AND METHODS: Twenty sheep mandibles were used in the study. Pre-surgical cone-beam computed tomography (CBCT) scans were acquired for the mandibles by using the Kodak 9000 3D cone-beam system. Two implants with dimensions of 4 mm in diameter and 10 mm in length were virtually planned on the 3D models of each mandible by using the Mimics software, v. 16.0. Twenty surgical guides were designed and printed using the PolyJet technology. A total of 40 implants were placed using the surgical guides, 1 on each side of the mandible (2 implants per mandible). The post-surgical CBCT scans of the mandibles were performed and superimposed on the pre-surgical CBCT scans. The amount of deviation between the virtually planned placement and the actual implant placement was measured, and a descriptive analysis was done.

    RESULTS: The results showed that the mean deviation at the implant coronal position was 1.82 ±0.74 mm, the mean deviation at the implant apex was 1.54 ±0.88 mm, the mean depth deviation was 0.44 ±0.32 mm, and the mean angular deviation was 3.01 ±1.98°.

    CONCLUSIONS: The deviation of dental implant placement performed with a 3D-printed surgical guide (the PolyJet technology) is within the acceptable 2-millimeter limit reported in the literature.

    Matched MeSH terms: Mandible
  4. Sivarajan S, Mani SA, John J, Fayed MMS, Kook YA, Wey MC
    Korean J Orthod, 2021 Jan 25;51(1):55-74.
    PMID: 33446621 DOI: 10.4041/kjod.2021.51.1.55
    Objective: To systematically review studies on canine agenesis prevalence in different populations and continents, based on the jaw, sex, location, and associated dental anomalies.

    Methods: Electronic and hand searches of English literature in PubMed, Web of Science, Scopus, OpenGrey, and Science Direct were conducted, and the authors were contacted when necessary. Observational studies (population-based, hospital/clinic-based, and cross-sectional) were included. For study appraisal and synthesis, duplicate selection was performed independently by two reviewers. Study quality was assessed using a modified Strengthening the Reporting of Observational Studies in Epidemiology checklist, with main outcome of prevalence of canine agenesis.

    Results: The global population prevalence of canine agenesis was 0.30% (0.0-4.7%), highest in Asia (0.54%), followed by Africa (0.33%), and the least in Europe and South America (0.19% in both continents). Canine agenesis was more common in the maxilla (88.57%), followed by both maxilla and mandible (8.57%), and the least common was mandible-only presentation (2.86%). The condition was more common in females (female:male ratio = 1.23), except in Asia (female:male ratio = 0.88) and Africa (female:male ratio = 1). In Asia, unilateral agenesis was almost twice as prevalent as bilateral, but in Europe, the bilateral form was more common.

    Conclusions: The overall prevalence of canine agenesis is 0.30%, with the highest prevalence in Asia, followed by Africa, Europe, and South America. The condition is more common in the maxilla than the mandible, and in females than males (except in Asia and Africa), with unilateral agenesis being more common in Asia and the bilateral form showing a greater prevalence in Europe.

    Matched MeSH terms: Mandible
  5. Muhammadazril Mohd Saad, Nur Amin Abd Rahman, Khairani Idah Mokhtar, Noraini Abu Bakar, Azrul Fazwan Kharuddin, Wan Rohani Wan Taib
    MyJurnal
    Polymorphism in PAX9 (rs8004560), a gene responsible for craniofacial and tooth development, is often associated with Class II/Div2 malocclusion. This study aimed to detect the presence of PAX9 SNP (rs8004560) and to determine its genotype and allele distribution in Class II skeletal base malocclusion, contributed by retrognathic mandible, in the local Malaysian population. The association of PAX9 SNP (rs8004560) with Class II skeletal base malocclusion was also determined. A case control study was performed on 30 samples; 15 from Class II skeletal base malocclusion, and 15 from Class I skeletal base subject as control. Cephalometric measurements were performed prior to saliva samples collection. Genomic DNA was extracted from unstimulated saliva of all subjects, and the DNA was amplified using specific primers for marker rs8004560, followed by genotyping by sequencing. SHEsis online software was used to analyse Hardy-Weinberg Equilibrium (HWE) for cases and controls. Allelic and genotypic frequencies were compared between cases and controls. Significant difference in allele frequency was observed within the group whereby G allele was over-represented in the analysed population (p0.05). Although no genetic association between PAX9 SNP (rs8004560) with Class II skeletal base malocclusion was observed, significant difference in allele frequency observed might provide some indication in the involvement of PAX9 polymorphism in Class II skeletal base malocclusion contributed by retrognathic mandible. Further research utilising larger sample size will be required in order to determine the role of PAX9 gene in the aetiology of Class II skeletal base malocclusion observed in the local Malaysian population.
    Matched MeSH terms: Mandible
  6. Ahmad P, V'Vian T, Chaudhary FA, Chaudhary A, Haseeb AA, Yaqoob MA, et al.
    Niger J Clin Pract, 2021 Jul;24(7):1028-1036.
    PMID: 34290179 DOI: 10.4103/njcp.njcp_499_20
    Background: Third molar impaction, if left untreated, has the potential to cause several complications. The evaluation of surgical difficulty of impacted third molar extraction aids in better formulation of treatment plan by minimizing surgical complications.

    Objective: This study aimed to determine the prevalence of third molar impaction and related pathologic conditions in a cohort of patients living in North-eastern Peninsular Malaysia.

    Methods: In this retrospective study, 490 orthopantomograms (OPGs) of patients who were referred to the Oral and Maxillofacial Surgery department between January 2010 and December 2019 were assessed. Data including age, gender, ethnicity, frequency of third molar impactions, their angulations and levels of eruption, retromolar space, and associated pathologic conditions were collected. Statistical analysis was performed using the Statistical Package for Social Sciences (SPSS) version 24.0. The significance level was set to P < 0.05.

    Results: A total of 490 patients with a mean age of 28.87 years (range: 20-64) demonstrated 1957 impacted third molars (1022 mandibular + 935 maxillary). Impacted third molars were more likely present in females than males (1:2.20) (p < 0.05); and in Malay-ethnic (44.49%) patients followed by Chinese (34.45%) and Indians (21.02%). Mesioangular was the most common angulation of impaction both in the maxilla (24.68%) and mandible (18.34%). The most common pattern of third molar impaction was IIA (61.67%), and the retromolar space was significantly larger in males (13.6 mm; P < 0.05) than females (11.6 mm). The most frequently occurring pathological condition associated with third molars impaction is dental caries in the second or third molar (15.38%).

    Conclusions: This study highlights mesioangular impaction with their occlusal plane at the same level as the occlusal plane of the adjacent tooth being the most prevalent pattern of third molar impaction in North-eastern Peninsular Malaysia.

    Matched MeSH terms: Mandible
  7. Veerabhadrappa SK, Hesarghatta Ramamurthy P, Yadav S, Bin Zamzuri AT
    Acta Odontol Scand, 2021 Oct;79(7):514-522.
    PMID: 33764264 DOI: 10.1080/00016357.2021.1901984
    OBJECTIVE: To perform a systematic review of the characteristics of ectopic mandibular third molar (EMTM) in terms of its clinical presentation, radiographic findings, associated lesions, management and post-operative complications.

    MATERIALS AND METHODS: We searched the Pubmed, Medline, Embase and EBSCO databases for full-text, peer-reviewed journal publications from January 1965 to August 2020. Data extraction was done using preferred reporting items for systematic reviews and meta-analyses (PRISMA) guidelines.

    RESULTS: Our search yielded 45 case reports involving 48 EMTM teeth. The mean age of the patients was 46.3 years with an age range of 22-80 years. Thirty-two cases were seen in women as compared to 13 cases in men. The majority of the cases (42) were unilateral, with only three bilateral cases. Among the 48 EMTM teeth, 21 were seen in the condylar region followed by 13 in the ramus, seven in the sigmoid notch, three in the angle and two each in the coronoid process and the lower border of the mandible. Twenty-five EMTM teeth had histopathologically confirmed dentigerous cysts, eight teeth had chronic infection/inflammation/granulation tissue, two had radicular cysts, two had infected cysts, two teeth had normal follicular spaces, and associated lesions were not mentioned for nine teeth. The most common symptoms were swelling (33 teeth) and pain (29 teeth), and six teeth were asymptomatic. Surgical removal through intraoral approach was carried out for 27 teeth, while an extra-oral approach was adopted in 15 teeth, a spontaneous regression of the pericoronal radiolucency was noticed in one tooth, four teeth were not treated and choice of treatment was not mentioned for one tooth. Mild transient paraesthesia was frequently observed; however, serious post-surgical complications were not reported.

    CONCLUSIONS: The present review found that EMTM can present with complex clinicopathological characteristics, with a majority of the cases being asymptomatic in the beginning and turning out to be symptomatic with lesions at later stages, requiring surgical intervention.

    Matched MeSH terms: Mandible
  8. Wong, Lai Hong, Balkis Bashuri, Atiah Ayunni Abdul Ghani, Khairul Osman, Nor Atika Md Ashar
    MyJurnal
    Identifi cation of unknown suspect through bite marks has always been challenging. Narrowing list of suspects through sex and race markers is always recommend but rarely utilized due to limited publication in this area. Thus, this preliminary research was aimed to study the difference of bite mark made on dental wax between sex and race. A sample size of 40 UKM undergraduates comprising of Malay (male = 10, female = 10) and Chinese (male = 10, female = 10) were used in this study. Bite mark of subject was obtained through dental wax, digitally scanned and analyzed using Image-J software. Parameters measured were anterior teeth size, intercanine width and anterior teeth relative rotation. Result indicated that mandible left canine tooth size had signifi cant sexual dimorphism (p < 0.05) in differentiating sex. The means for male and female measured were 4.63 ± 1.05 mm and 5.35 ± 0.87 mm respectively. In addition to the result, tooth size of maxillary left canine and mandible left lateral incisor were signifi cantly different (p < 0.05) between races. Means for mandible left canine Malay and Chinese were 5.27 ± 1.01 mm and 4.50 ± 1.22 mm respectively. Furthermore, left lateral incisor mandible had means of 5.15 ± 0.87 mm and 4.60 ± 0.74 mm for Malay and Chinese respectively. Unfortunately, there were no signifi cant differences for intercanine width and anterior teeth relative rotation between the two major races in Malaysia. In conclusion, this research has demonstrated the possibility of using tooth size of mandible left canine, maxillary left canine and mandible left lateral discriminate sex and race.
    Matched MeSH terms: Mandible
  9. Rosfaima Othman Jaffar, Tin-Oo M.M.
    MyJurnal
    The aim of this study was to identify the position of impacted mandibular third molars based on the classifications of Pell & Gregory and Winter, the indications for extraction, and the relation of post-operative complications and position. Records of patients who attended Hospital Universiti Sains Malaysia between January and December 2007 for surgical removal of mandibular third molars were reviewed. The angulation type, width and depth of impaction were determined by reviewing the orthopantomograms. The indications of extraction and occurrence of any post- operative complications were recorded. A total of 238 impacted teeth were surgically extracted from 194 patients (97 males, 97 females). The reasons for extraction include recurrent pericoronitis (43.1%) followed by prophylactic purposes (33.5%). Mesioangular impactions accounted for 52.3% and Class IIA position of impaction accounted for 45.7% of extractions. The most common post-operative complication was persistent pain and swelling (14.7%) followed by trismus (4.1%) and dry socket (3.0%). There was no significant relationship between the angulation, width and depth of impaction and the occurrence of complication. Mesioangular type and Class IIA position of impaction were the most common impaction. Although the association was not significant, high frequency of post-operative complications was observed in mesioangular, horizontal, IIA and IIC positions.
    Matched MeSH terms: Mandible
  10. Khuder T, Yunus N, Sulaiman E, Dabbagh A
    J Mech Behav Biomed Mater, 2017 11;75:97-104.
    PMID: 28709037 DOI: 10.1016/j.jmbbm.2017.06.039
    Denture fracture is a common clinical complication caused by improper material selection, design, or fabrication technique. This study aimed to investigate the effect of two attachment systems on fracture risk of the implant-overdentures (IOD) via finite element analysis (FEA), using the force distributions obtained from patients' occlusal analyses and to compare the obtained results with the clinical complications associated with these attachments. A three-dimensional jaw model comprised of the edentulous bones was constructed. Three types of mandibular prostheses including complete denture (CD) (model LCD), IOD with Locator attachment (model LID-L), and IOD with telescopic attachment (model LID-T), as well as a maxillary CD (model UCD) were assembled. The vertical occlusal forces at anterior and posterior quadrants were obtained from the patients wearing mandibular CDs or IODs. The FEA results were further compared with the mechanical failures of different prostheses observed at patient recalls. In overall, the fracture risk of mandibular prostheses was lower than the maxillary compartments. The UCD opposing LCD underwent higher strains than that opposing LID-L and LID-T, which was mostly concentrated at the anterior mid-palatal polished surface. On the other hand, LID-L showed the lowest strain, followed by LID-T, and LCD. The obtained results were consistent with the clinical complications observed in the patient recalls.
    Matched MeSH terms: Mandible
  11. Tengku Shaeran TA, Shaari R, Abdul Rahman S, Alam MK, Muhamad Husin A
    J Oral Biol Craniofac Res, 2017 Jan-Apr;7(1):7-12.
    PMID: 28316914 DOI: 10.1016/j.jobcr.2016.10.007
    BACKGROUND: Bilateral sagittal split osteotomy (BSSO) is the most versatile procedure and adopted by many surgeons to relocate the mandible in patients having mandibular prognathism (MP). Injury to the inferior alveolar nerve (IAN) and unfavorable splits are two surgical complications of BSSO which are associated with mandibular morphology. Uses of cone beam computed tomography (CBCT) in providing 3-D images has gained a wider acceptance in surgical field nowadays. Its advantages are including reduced cost, lesser radiation dose and smaller physical footprint comparing to the conventional computed tomography.

    PURPOSE: This study aims to identify the differences in morphology of prognathic and non-prognathic mandible at BSSO sites using cone beam computed tomography images.

    METHODS: This retrospective study involved 51 CBCT images of patients having mandibular prognathism and without mandibular prognathism. The latter group made up from patients with Class I skeletal pattern. Samples were taken using purposive sampling method from two clinical centers.

    RESULT: Prognathic mandible has higher lingula level, superiorly and buccally placed inferior alveolar nerve canal at distal second molar, thinner mediolateral width of ramus at anterior and posterior part and thinner anteroposterior width of the ramus.

    CONCLUSION: Morphology of mandible in patients with mandibular prognathism (MP) was significantly different from patients without mandibular prognathism (WMP) for most of the parameters. The high risk parameters may be highlighted to the patients using cone beam computed tomography images.
    Matched MeSH terms: Mandible
  12. Deng PU, Halim MS, Masudi SM, Al-Shehadat S, Ahmad B
    Eur J Dent, 2018 8 28;12(3):410-416.
    PMID: 30147408 DOI: 10.4103/ejd.ejd_82_18
    Objective: The aim of this study is to investigate the variations in the number of root and canal in the mandibular first permanent molars (MFPMs) teeth in East Coast Malaysian population using cone-beam computed tomography (CBCT).

    Materials and Methods: CBCT images which show MFPMs recorded in HUSM Dental Clinic between January 2015 and June 2016 was obtained and analyzed for their number of roots and canals. A total of 208 CBCT images of MFPMs were collected; 118 patients had unilateral molars and 90 patients had bilateral molars. The following observations were made: (1) root number; (2) number of canals per root; and (3) comparisons of number of roots and canals according to gender, ethnicity, and position.

    Results: The majority of cases of bilateral MFPM had the same number of roots (95.6%, 95% confidence interval [CI]: 89.01%, 98.78%) on both the right and left side and only 4 cases (4.4%, 95% CI: 1.22%, 10.99%) had 3 roots on the right and 2 roots on the left sides. The majority of cases had the same number of canals on both sides (66.7%, 95% CI: 55.95, 76.26%) and 33.3% (95% CI: 23.74%, 44.05%) with unequal number of canals. The occurrence of the number of canals was not independent of the sides of the arch (P < 0.001) and there was statistically significantly greater proportion of cases who had greater number of canals on the right side than the left (P = 0.03). The prevalence of right single-rooted MFPM was very small at 0.3% (n = 1) in a Malay male (95% CI: 0.00, 1.83) and the most prevalent was two roots first molar (88.4%). The number of roots was not associated with sex or ethnic group (P > 0.05). The MFPM with a single root was found to have only one mesial canal. For two rooted MFPM, the most prevalent occurrence was two canals at the mesial and one canal at the distal roots (59%); followed by single canals in each mesial and distal (21%) and double canals per root (18%). Three roots MFPM have either single or double canals in the mesial root and double canals in the distal root.

    Conclusions: The majority of population in the East Coast region of Malaysia has two roots and three root canals in their MFPMs. There was no difference in the number of roots between gender and ethnic and canals between ethnic.

    Matched MeSH terms: Mandible
  13. Lim JTS, Kang WJ, Ajit Bapat R, Kanneppady SK, Pandurangappa R
    J Maxillofac Oral Surg, 2019 Dec;18(4):596-603.
    PMID: 31624443 DOI: 10.1007/s12663-018-1168-2
    Objectives: The risk of damaging the mandibular incisive canal (MIC) during surgery in the anterior mandible should not be overlooked. Hence, preoperative radiographic assessment is essential to avoid complications. This study was aimed to estimate the length of the MIC in the interforaminal safe zone, to analyse its course in relation to the lingual and the buccal cortical plates of the mandible using cone beam computed tomography (CBCT) scans and to relate the above findings to age, gender, dental status and Malaysian races.

    Methods: Retrospective analysis of 100 CBCT scans (n = 200) was performed on both sides of the mandible. Cross-sectional and panoramic images were reconstructed. The length of the MIC and the horizontal distances between the MIC and the buccal and the lingual cortical plates were measured at the three different points (starting, mid-, end points). Independent samples t-test and one-way ANOVA test were used to analyse the variation in the length and course of the MIC in gender, age, dental status and Malaysian races.

    Results: The mean length of the MIC was 11.31 ± 2.65 mm, with the Malays having the longest MIC, followed by the Chinese and the Indians (p 

    Matched MeSH terms: Mandible
  14. Alsrouji MS, Ahmad R, Ibrahim N, Kuntjoro W, Al-Harbi FA, Baba NZ
    J Prosthodont, 2019 Apr;28(4):373-378.
    PMID: 30875139 DOI: 10.1111/jopr.13047
    PURPOSE: Blood flow disturbance from functional pressure may lead to ischemia and accumulation of metabolites leading to residual ridge resorption (RRR) underneath complete dentures. The purposes of this study were to determine the effect of mandibular complete denture (CD) and implant-retained overdenture (IRO) on blood flow disturbance in the opposing denture bearing-mucosa of maxillary CD and to compare the blood flow disturbance to RRR of the anterior maxilla.

    MATERIALS AND METHODS: The test group included 9 participants rehabilitated by maxillary CD opposing mandibular IRO, while the control group consisted of 4 participants with CDs. Blood flow was measured by laser Doppler flowmetry (LDF) after denture removal for 0, 30, 60, and 90 minutes. RRR was quantified as reduction in bone volume a year post-treatment. The measurement of blood flow was then compared to the quantification of RRR.

    RESULTS: The mean blood flow measure for the IRO group was significantly lower than CD after immediate denture removal and 30 minutes later. After 60 minutes, the mean difference was not significant between groups, and at 90 minutes, the mean blood flow of both groups equalized to reach a steady state of 377 BPU. The mandibular IRO had reduced the initial blood flow measure in the opposing anterior maxilla mucosa to almost a quarter (103 BPU) of the steady state value (377 BPU) compared to the CD, which reduced it to only about one half (183 BPU), suggesting greater blood flow disturbance in the IRO group. This result is in tandem with the greater reduction of bone volume observed in the IRO group, which was 7.3 ± 1.3% after a year, almost three times higher than CD group at 2.6 ± 1.7%.

    CONCLUSION: IRO may cause significantly higher blood flow disturbance than CD and may have contributed to greater RRR in the anterior maxilla.

    Matched MeSH terms: Mandible
  15. Yusof M, Dasor MM, Ariffin F, Reduwan NH, Kamil W, Mah MC
    Aust Dent J, 2020 Dec;65(4):308-312.
    PMID: 32259287 DOI: 10.1111/adj.12756
    This report presents two cases of idiopathic osteosclerosis involving the maxilla and mandible which were identified as a buccally impacted canine and a retained root, respectively, on clinical and plain radiographical examinations. Both patients were females who presented with hypodontia. Radiographic evaluation revealed solitary well-defined radiopaque masses with thickened cortical border. Both patients were undergoing orthodontic treatment and one was planned for a surgical traction of unerupted tooth prior to cone-beam CT assessment. In this report, we reviewed the clinical findings and explained the radiographic appearance of idiopathic osteosclerosis through plain radiographs and cone-beam CT to facilitate its identification among general dentists and oral and maxillofacial radiologists.
    Matched MeSH terms: Mandible
  16. Shaeran TAT, Samsudin AR
    J Craniofac Surg, 2019 Jun 28.
    PMID: 31261319 DOI: 10.1097/SCS.0000000000005689
    Temporomandibular joint ankylosis in children commonly lead to difficulty in feeding, poor oral hygiene, retrognathic mandible and obstructive sleep apnea. Surgical release of the ankylosis has always been the standard treatment. The authors report a 12 year old boy with unilateral temporomandibular joint ankylosis and obstructive sleep apnea underwent surgical release of the ankylosis with successful gain in mouth opening. However, he continued to suffer from obstructive sleep apnea as confirmed by post-operative polysomnography. Orthognathic surgery for mandibular advancement is not favorable due to his young age and mandibular distraction osteogenesis was not a choice. A mandibular advancement device similar to orthodontic myofunctional appliance was the preferred choice in the post-operative period while waiting for definitive retrognathia surgical treatment after skeletal maturity. Surgical release of temporomandibular joint ankylosis corrects the oral problem but does not adequately address the narrow pharyngeal airway space. Assessment of pharyngeal airway with a high suspicion of obstructive sleep apnea is mandatory in the management of TMJ ankylosis.
    Matched MeSH terms: Mandible
  17. Kumar SR, Patil PG, Choy CS, Veerakumarasivam A
    Indian J Dent Res, 2020 5 22;31(2):197-202.
    PMID: 32436897 DOI: 10.4103/ijdr.IJDR_553_17
    Background: The location of the inferior alveolar nerve (IAN) is generally constant in fully grown mandibles. If we know its average distance from the lower border of the mandible, available bone length from the crest of the edentulous ridge can be estimated by physical measurement of the whole length of mandible in that area. This study aimed to measure the superio-inferior distance of the inferior alveolar nerve (SIDIAN) from the base of the mandible in posterior regions on the right and left side based on cone-beam-computed tomography (CBCT) scans and to evaluate gender and ethnicity-related variations in the Malaysian population.

    Materials and Methods: A total of 100 CBCT-Digital Imaging and Communications in Medicine files of the patients of 3 ethnic populations (Malay, Chinese and Indian) between the ages of 18 and 80 years were selected for the study. The files were imported onto the iCAT software. The measurements of the SIDIAN to the lower border of the mandible in molar regions were done on both sides. The data was analysed using t-test, one-way analysis of variance test, and correlation coefficient test via the SPSS software.

    Results: Statistically significant positive correlations were identified between the SIDIAN from the lower border of the mandible in the first and second molar regions within the same side as well as between both sides of the mandible (r ≈ 0.8). There were no statistically significant differences between genders. However, there were statistically significant differences on both molar regions and on both sides in all three ethnic groups (P < 0.05). In general, the SIDIAN from the lower border of the mandible was greatest amongst Chinese and smallest amongst Indians.

    Conclusions: The strong positive correlations on both sides of the mandible indicate the presence of symmetry. Ethnicity-related variations exist in terms of the location of the IAN in the mandible.

    Matched MeSH terms: Mandible
  18. Kumar Singh A, Sulugodu Ramachandra S, Arora S, Dicksit DD, Kalyan CG, Singh P
    J Oral Biol Craniofac Res, 2017 Sep-Dec;7(3):158-160.
    PMID: 29123992 DOI: 10.1016/j.jobcr.2017.08.008
    Introduction: Oral tori and exostosis are non-pathological bony protuberances seen on the alveolar surfaces of the jaw bones. These are commonly seen on the palatal surfaces of the maxilla [torus palatinus (TP)] and around the premolars in the lingual surface of the mandible [torus mandibularis (TM)]. The aim of this cross-sectional study was to determine the prevalence of tori/exostosis in the Malaysian population.

    Methodology: A total of 2666 patients were examined for the presence of tori and exostosis in the maxilla and mandible and were categorized into TP, TM, and exostosis (facial/labial). Collected data was analysed for obtaining descriptive statistics.

    Results: 882 subjects were noticed with oral tori/exostosis among the population studied with a prevalence rate of 33%. TP was seen more in females (35%), compared to males (20%), and this difference was statistically significant (p value 
    Matched MeSH terms: Mandible
  19. Awang-Kechik NH, Ahmad R, Doustjalali SR, Sabet NS, Abd-Rahman AN
    J Clin Exp Dent, 2019 Mar;11(3):e269-e274.
    PMID: 31001398 DOI: 10.4317/jced.55546
    Background: The biological responses involved during retention phase have been studied for many years but little is known about the effect of saliva proteome during retention phase of post-orthodontic treatment. This study aims to identify the protein profiles during retention phase in relation to biological processes involved by Liquid Chromatography Mass Spectrometry (LC-MS) approach.

    Material and Methods: A total of 5 ml of unstimulated saliva was collected from each subject (10 non-orthodontic patients and 15 post-orthodontic patients with 6-months retention phase). Samples were then subjected to LC-MS analysis. The expressed proteins were identified and compared between groups. Incisor irregularity for both maxilla and mandible were determined with Little's Irregularity Index at 6-months retention phase.

    Results: 146 proteins and 135 proteins were expressed in control and 6-months retention phase group respectively. 15 proteins were identified to be co-expressed between groups. Immune system process was only detected in 6-months retention phase group. Detected protein in immune system process was identified as Tyrosine-protein kinase Tec. Statistical significant of incisor irregularity was only found in mandible at 6-months retention phase.

    Conclusions: Our study suggests that immune system process protein which is Tyrosine-protein kinase Tec could be used as biomarker for prediction of stability during retention phase of post-orthodontic treatment. Key words:Orthodontics, proteomics, retention, LC-MS, saliva.

    Matched MeSH terms: Mandible
  20. Patil PG, Seow LL, Kweh TJ, Nimbalkar S
    J Contemp Dent Pract, 2021 Nov 01;22(11):1346-1354.
    PMID: 35343463
    AIM: The purpose of this review is to compare randomized clinical trials evaluating the peri-implant tissue outcomes using different unsplinted attachment systems in two implant-retained mandibular overdentures.

    BACKGROUND: Literature lacks information on various unsplinted attachment systems and their effect on peri-implant tissue health. A focus question (as per PICOS) was set as follows: Does one particular unsplinted attachment system (I) compared with another (C) results in better peri-implant outcomes (O) in two implant-retained mandibular overdentures (P) using randomized controlled trials (RCTs) (S)? The literature search was conducted in the PubMed, MEDLINE and Cochrane Central Register of Controlled Trials (CENTRAL) databases between January 2011 and December 2021. The keywords used were "denture, overlay," "denture," "overlay" AND "dental prosthesis, implant supported," "dental implants," "dental implant abutment design" AND "jaw, edentulous," "mouth, edentulous" AND "mandible." Only RCTs on two implant-retained mandibular overdentures using unsplinted attachment systems measuring peri-implant tissue outcomes with minimum 1-year follow-up were selected. In total, 224 studies were identified in initial search, and 25 were shortlisted for full-text evaluation. Four studies were included for systematic review upon considering inclusion and exclusion criteria. The risk of bias was evaluated using Cochrane Risk of Bias Tool 2.0 (RoB 2.0).

    REVIEW RESULTS: A total of 41 patients received ball attachments (in 3 studies), 36 patients received low-profile attachments (in 3 studies), 16 patients received magnet attachments (in 1 study), and 13 patients received telescopic attachments (in 1 study). All four studies used standard sized implants, however, differed in implant manufacturers. Two studies which compared ball attachments low-profile attachments revealed-similar peri-implant tissue health parameters but differed in crestal bone-level changes. One study compared ball with telescopic attachments and revealed similar results in crestal bone-level changes and all four peri-implant tissue health parameters. Single study compared magnets with low-profile attachments and shown lesser bone loss with magnet attachments. Single study was judged to have low risk of bias, single with some concerns, and remaining two to have high risk of bias.

    CONCLUSION: Gingival index and bleeding index of the patients were not influenced by any of the unsplinted overdenture attachment (stud, magnet, telescopic) system. Inconclusive results found among the studies evaluated comparing crestal bone loss and plaque index.

    CLINICAL SIGNIFICANCE: This review manuscript has simplified comparative analysis of different unsplinted attachment systems used in two implant mandibular overdentures to help clinicians choose correct system in such situation.

    Matched MeSH terms: Mandible
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links