MyMedR

Displaying publications 121 - 132 of 132 in total

Abstract:

Sort:

RP-HPLC analytical method development and optimization for quantification of donepezil hydrochloride in orally disintegrating tablet

Liew KB, Peh KK, Fung Tan YT

Pak J Pharm Sci, 2013 Sep;26(5):961-6.
PMID: 24035953

An easy, fast and validated RV-HPLC method was invented to quantify donepezil hydrochloride in drug solution and orally disintegrating tablet. The separation was carried out using reversed phase C-18 column (Agilent Eclipse Plus C-18) with UV detection at 268 nm. Method optimization was tested using various composition of organic solvent. The mobile phase comprised of phosphate buffer (0.01M), methanol and acetonitrile (50:30:20, v/v) adjusted to pH 2.7 with phosphoric acid (80%) was found as the optimum mobile phase. The method showed intraday precision and accuracy in the range of 0.24% to -1.83% and -1.83% to 1.99% respectively, while interday precision and accuracy ranged between 1.41% to 1.81% and 0.11% to 1.90% respectively. The standard calibration curve was linear from 0.125 μg/mL to 16 μg/mL, with correlation coefficient of 0.9997±0.00016. The drug solution was stable under room temperature at least for 6 hours. System suitability studies were done. The average plate count was > 2000, tailing factor <1, and capacity factor of 3.30. The retention time was 5.6 min. The HPLC method was used to assay donepezil hydrochloride in tablet and dissolution study of in-house manufactured donepezil orally disintegrating tablet and original Aricept.

Matched MeSH terms: Tablets
Fulltext Gamma scintigraphic study of the hydrodynamically balanced matrix tablets of Metformin HCl in rabbits

Razavi M, Karimian H, Yeong CH, Sarji SA, Chung LY, Nyamathulla S, et al.

Drug Des Devel Ther, 2015;9:3125-39.
PMID: 26124637 DOI: 10.2147/DDDT.S82935

The purpose of this study is to evaluate the in vitro and in vivo performance of gastro-retentive matrix tablets having Metformin HCl as model drug and combination of natural polymers. A total of 16 formulations were prepared by a wet granulation method using xanthan, tamarind seed powder, tamarind kernel powder and salep as the gel-forming agents and sodium bicarbonate as a gas-forming agent. All the formulations were evaluated for compendial and non-compendial tests and in vitro study was carried out on a USP-II dissolution apparatus at a paddle speed of 50 rpm. MOX2 formulation, composed of salep and xanthan in the ratio of 4:1 with 96.9% release, was considered as the optimum formulation with more than 90% release in 12 hours and short floating lag time. In vivo study was carried out using gamma scintigraphy in New Zealand White rabbits, optimized formulation was incorporated with 10 mg of (153)Sm for labeling MOX2 formulation. The radioactive samarium oxide was used as the marker to trace transit of the tablets in the gastrointestinal tract. The in vivo data also supported retention of MOX2 formulation in the gastric region for 12 hours and were different from the control formulation without a gas and gel forming agent. It was concluded that the prepared floating gastro-retentive matrix tablets had a sustained-release effect in vitro and in vivo, gamma scintigraphy played an important role in locating the oral transit and the drug-release pattern.

Matched MeSH terms: Tablets
Fulltext Defined Daily Dose and Appropriateness of Clinical Application: The Coxibs and Traditional Nonsteroidal Anti-Inflammatory Drugs for Postoperative Orthopaedics Pain Control in a Private Hospital in Malaysia

Bakrin FS, Makmor-Bakry M, Che Hon WH, Faizal SM, Manan MM, Ming LC

Pharmacy (Basel), 2020 Dec 08;8(4).
PMID: 33302438 DOI: 10.3390/pharmacy8040235

INTRODUCTION: Drug utilization of analgesics in a private healthcare setting is useful to examine their prescribing patterns, especially the newer injectable cyclooxygenase (COX)-2 inhibitors (coxibs).
OBJECTIVES: To evaluate the utilization of coxibs and traditional nonsteroidal anti-inflammatory drugs (tNSAIDs) indicated for postoperative orthopaedic pain control using defined daily dose (DDD) and ratio of use density to use rate (UD/UR).
METHOD: A retrospective drug utilization review (DUR) of nonsteroidal anti-inflammatory drugs (NSAIDs) at an inpatient department of a private teaching hospital in Seremban, Malaysia was conducted. Patients' demographic characteristics, medications prescribed, clinical lab results, visual analogue scale (VAS) pain scores and length of hospital stay were documented. Orthopaedic surgeries, namely arthroscopy, reconstructive, and fracture fixation, were included. Stratified random sampling was used to select patients. Data were collected through patients' medical records. The DDD per 100 admissions and the indicator UD/UR were calculated with the World Health Organization's DDD as a benchmark. The inclusion criteria were patients undergoing orthopaedic surgery prescribed with coxibs (celecoxib capsules, etoricoxib tablets, parecoxib injections) and tNSAIDs (dexketoprofen injections, diclofenac sodium tablets). Data were analysed descriptively. This research was approved by the academic institution and the hospital research ethics committee.
RESULT: A total of 195 records of patients who received NSAIDs were randomly selected among 1169 cases. In term of the types of orthopaedic surgery, the ratio of included records for arthroscopy:fracture fixation:reconstructive surgery was 55.4:35.9:8.7. Most of the inpatients had low rates of common comorbidities such as cardiovascular disease as supported by their baseline parameters. The majority were not prescribed with other concomitant prescriptions that could cause drug interaction (74.9%), or gastroprotective agents (77.4%). Overall, DDDs per 100 admissions for all NSAIDs were less than 100, except for parecoxib injections (389.23). The UD/UR for all NSAIDs were less than 100, except for etoricoxib tablets (105.75) and parecoxib injections (108.00).
DISCUSSION: As per guidelines, the majority (96.9%) received other analgesics to ensure a multimodal approach was carried out to control pain. From the UD/UR results, the arthroscopy surgery was probably the most appropriate in terms of NSAID utilization.
CONCLUSION: The prescribing pattern of NSAIDs except parecoxib was appropriate based on adverse effect and concurrent medication profile. The findings of this DUR provide insight for a low-risk patient population at a private specialized teaching hospital on the recommended use of NSAIDs for postoperative orthopaedic pain control.

Matched MeSH terms: Tablets
Coatless alginate pellets as sustained-release drug carrier for inflammatory bowel disease treatment

Md Ramli SH, Wong TW, Naharudin I, Bose A

Carbohydr Polym, 2016 Nov 05;152:370-381.
PMID: 27516284 DOI: 10.1016/j.carbpol.2016.07.021

Conventional alginate pellets underwent rapid drug dissolution and failed to exert colon targeting unless subjected to complex coating. This study designed coatless delayed-release oral colon-specific alginate pellets for ulcerative colitis treatment. Alginate pellets, formulated with water-insoluble ethylcellulose and various calcium salts, were prepared using solvent-free melt pelletization technique which prevented reaction between processing materials during agglomeration and allowed reaction to initiate only in dissolution. Combination of acid-soluble calcium carbonate and highly water-soluble calcium acetate did not impart colon-specific characteristics to pellets due to pore formation in fragmented matrices. Combination of moderately water-soluble calcium phosphate and calcium acetate delayed drug release due to rapid alginate crosslinking by soluble calcium from acetate salt followed by sustaining alginate crosslinking by calcium phosphate. The use of 1:3 ethylcellulose-to-alginate enhanced the sustained drug release attribute. The ethylcellulose was able to maintain the pellet integrity without calcium acetate. Using hydrophobic prednisolone as therapeutic, hydrophilic alginate pellets formulated with hydrophobic ethylcellulose and moderately polar calcium phosphate exhibited colon-specific in vitro drug release and in vivo anti-inflammatory action. Coatless oral colon-specific alginate pellets can be designed through optimal formulation with melt pelletization as the processing technology.

Matched MeSH terms: Tablets
Smart nanocrystals of artemether: fabrication, characterization, and comparative in vitro and in vivo antimalarial evaluation

Shah SM, Ullah F, Khan S, Shah SM, de Matas M, Hussain Z, et al.

Drug Des Devel Ther, 2016;10:3837-3850.
PMID: 27920499

Artemether (ARTM) is a very effective antimalarial drug with poor solubility and consequently low bioavailability. Smart nanocrystals of ARTM with particle size of 161±1.5 nm and polydispersity index of 0.172±0.01 were produced in <1 hour using a wet milling technology, Dena(®) DM-100. The crystallinity of the processed ARTM was confirmed using differential scanning calorimetry and powder X-ray diffraction. The saturation solubility of the ARTM nanocrystals was substantially increased to 900 µg/mL compared to the raw ARTM in water (145.0±2.3 µg/mL) and stabilizer solution (300.0±2.0 µg/mL). The physical stability studies conducted for 90 days demonstrated that nanocrystals stored at 2°C-8°C and 25°C were very stable compared to the samples stored at 40°C. The nanocrystals were also shown to be stable when processed at acidic pH (2.0). The solubility and dissolution rate of ARTM nanocrystals were significantly increased (P<0.05) compared to those of its bulk powder form. The results of in vitro studies showed significant antimalarial effect (P<0.05) against Plasmodium falciparum and Plasmodium vivax. The IC50 (median lethal oral dose) value of ARTM nanocrystals was 28- and 54-fold lower than the IC50 value of unprocessed drug and 13- and 21-fold lower than the IC50 value of the marketed tablets, respectively. In addition, ARTM nanocrystals at the same dose (2 mg/kg) showed significantly (P<0.05) higher reduction in percent parasitemia (89%) against P. vivax compared to the unprocessed (27%), marketed tablets (45%), and microsuspension (60%). The acute toxicity study demonstrated that the LD50 value of ARTM nanocrystals is between 1,500 mg/kg and 2,000 mg/kg when given orally. This study demonstrated that the wet milling technology (Dena(®) DM-100) can produce smart nanocrystals of ARTM with enhanced antimalarial activities.

Matched MeSH terms: Tablets
Investigation on the effect of polymer and starch on the tablet properties of lyophilized orally disintegrating tablet

Liew KB, Peh KK

Arch Pharm Res, 2021 Aug;44(8):1-10.
PMID: 25579848 DOI: 10.1007/s12272-014-0542-y

Orally disintegrating tablet (ODT) is a user friendly and convenient dosage form. The study aimed to investigate the effect of polymers and wheat starch on the tablet properties of lyophilized ODT, with dapoxetine as model drug. Three polymers (hydroxypropylmethyl cellulose, carbopol 934P and Eudragit® EPO) and wheat starch were used as matrix forming materials in preparation of lyophilized ODT. The polymeric dispersion was casted into a mould and kept in a freezer at -20 °C for 4 h before freeze dried for 12 h. It was found that increasing in HPMC and Carbopol 934P concentrations produced tablets with higher hardness and longer disintegration time. In contrast, Eudragit® EPO was unable to form tablet with sufficient hardness at various concentrations. Moreover, HPMC seems to have a stronger effect on tablet hardness compared to Carbopol 934P at the same concentration level. ODT of less friable was obtained. Wheat starch acted as binder which strengthen the hardness of ODTs and prolonged the disintegration time. ODT comprising of HPMC and wheat starch at ratio of 2:1 was found to be optimum based upon the tablet properties. The optimum formulation was palatable and 80 % of the drug was released within 30 min in the dissolution study.

Matched MeSH terms: Tablets
Formulation and in vivo evaluation of ondansetron orally disintegrating tablets using different superdisintegrants

Sheshala R, Khan N, Chitneni M, Darwis Y

Arch Pharm Res, 2011 Nov;34(11):1945-56.
PMID: 22139694 DOI: 10.1007/s12272-011-1115-y

The aim of this study was to formulate cost effective taste-masked orally disintegrating tablets of ondansetron, a bitter drug using different superdisintegrants by a wet granulation technique. Microcrystalline cellulose (Avicel) as a diluent and disintegrant in addition to aspartame as a sweetener were used in all formulations. The prepared tablets were evaluated for weight variation, thickness, hardness, friability, drug content, water content, in vitro disintegration time and in vitro drug release. The tablets' hardness was maintained in the range of 2-3 kg and friability was <1% for all batches. All tablet formulations disintegrated rapidly in vitro within 5.83 to 33.0 sec. The optimized formulation containing 15% Polyplasdone XL-10 released more than 90% of drug within 5 min and the release was comparable to that of a commercial product. In human volunteers, optimized formulation was found to have a pleasant taste and mouth feel and they disintegrated in the oral cavity within 12 sec. The stability results were also satisfactory. A pharmacokinetic study with the optimized formulation was performed in comparison with a reference (Zofer MD 8®) and they were found to be bioequivalent. In conclusion, a cost effective ondansetron orally disintegrating tablet was successfully prepared with acceptable hardness, desirable taste and rapid disintegration in the oral cavity.

Matched MeSH terms: Tablets
Thermal sintering: a novel technique used in the design, optimization and biopharmaceutical evaluation of propranolol HCl gastric floating tablets

Venkata Srikanth M, Songa AS, Nali SR, Battu JR, Kolapalli VR

Drug Dev Ind Pharm, 2014 Jan;40(1):33-45.
PMID: 23317339 DOI: 10.3109/03639045.2012.744416

The objective of the present investigation was to study the applicability of thermal sintering technique for the development of gastric floating tablets of propranolol HCl. Formulations were prepared using four independent variables, namely (i) polymer quantity, (ii) sodium bicarbonate concentration, (iii) sintering temperature and (iv) sintering time. Floating lag time and t95 were taken as dependent variables. Tablets were prepared by the direct compression method and were evaluated for physicochemical properties, in vitro buoyancy and dissolution studies. From the drug release studies, it was observed that drug retarding property mainly depends upon the sintering temperature and time of exposure. The statistically optimized formulation (PTSso) was characterized by Fourier transform infrared spectroscopy and differential scanning calorimetry studies, and no significant chemical interaction between drug and polymer was observed. Optimized formulation was stable at accelerated conditions for a period of six months. PTSso was evaluated for in vivo buoyancy studies in humans for both fed and fasted states and found that gastric residence time of the floating tablets were enhanced by fed stage but not in fasted state. Optimized formulation PTSso and commercial formulation Ciplar LA 80 were subjected to bioavailability studies in healthy human volunteers by estimating pharmacokinetic parameters such as Cmax, Tmax, area under curve (AUC), elimination rate constant (Kel), biological half-life (t1/2) and mean residence time (MRT). There was a significant increase in the bioavailability of the propranolol HCl from PTSso formulation, which was evident from increased AUC levels and larger MRT values than Ciplar LA 80.

Matched MeSH terms: Tablets
Effect of polymer, plasticizer and filler on orally disintegrating film

Liew KB, Tan YT, Peh KK

Drug Dev Ind Pharm, 2014 Jan;40(1):110-9.
PMID: 23311593 DOI: 10.3109/03639045.2012.749889

Difficulty in swallowing tablets or capsules has been identified as one of the contributing factors to non-compliance of geriatric patients. Although orally disintegrating tablet was designed for fast disintegration in mouth, the fear of taking solid tablets and the risk of choking for certain patient populations still exist.

Matched MeSH terms: Tablets
pH-responsive CAP-co-poly(methacrylic acid)-based hydrogel as an efficient platform for controlled gastrointestinal delivery: fabrication, characterization, in vitro and in vivo toxicity evaluation

Shah SA, Sohail M, Minhas MU, Nisar-Ur-Rehman, Khan S, Hussain Z, et al.

Drug Deliv Transl Res, 2019 Apr;9(2):555-577.
PMID: 29450805 DOI: 10.1007/s13346-018-0486-8

Cellulose acetate phthalate-based pH-responsive hydrogel was synthesized for fabrication of polymeric matrix tablets for gastro-protective delivery of loxoprofen sodium. Cellulose acetate phthalate (CAP) was cross-linked with methacrylic acid (MAA) using free radical polymerization technique. Fourier transform infrared (FTIR) spectra confirmed the formation of cross-linked structure of CAP-co-poly(methacrylic acid). Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) confirmed the thermal stability of polymeric networks, and scanning electron microscopy (SEM) and energy-dispersive X-ray spectrum (EDS) images unveiled that the prepared formulations were porous in nature and thus the developed formulations had shown better diffusibility. Swelling and in vitro drug release was performed at various pHs and maximum swelling and release was obtained at pH 7.4, while swelling and release rate was very low at pH 1.2 which confirmed the pH-responsive behavior of CAP-co-poly(MAA). CAP-co-poly(MAA) copolymer prevents the release of loxoprofen sodium into the stomach due to reduced swelling at gastric pH while showing significant swelling and drug release in the colon. Cytotoxicity studies revealed higher biocompatibility of fabricated hydrogel. Acute oral toxicity studies were performed for the evaluation and preliminary screening of safety profile of the developed hydrogels. Matrix tablets were evaluated for release behavior at simulated body pH. The investigations performed for analysis of hydrogels and fabricated matrix tablets indicated the controlled drug release and gastro-protective drug delivery of CAP-co-poly(MAA) hydrogels and pH-sensitive matrix tablets for targeted delivery of gastro-sensitive/irritative agents. Graphical abstract.

Matched MeSH terms: Tablets
Taste-masked and affordable donepezil hydrochloride orally disintegrating tablet as promising solution for non-compliance in Alzheimer's disease patients

Liew KB, Tan YT, Peh KK

Drug Dev Ind Pharm, 2015 Apr;41(4):583-93.
PMID: 24495273 DOI: 10.3109/03639045.2014.884130

Manufacturing process and superdisintegrants used in orally disintegrating tablet (ODT) formulation are often time discussed. However, the effect of suitable filler for ODT formulation is not explored thoroughly.

Matched MeSH terms: Tablets
Oral 5-fluorouracil colon-specific delivery through in vivo pellet coating for colon cancer and aberrant crypt foci treatment

Bose A, Elyagoby A, Wong TW

Int J Pharm, 2014 Jul 1;468(1-2):178-86.
PMID: 24709212 DOI: 10.1016/j.ijpharm.2014.04.006

In situ coating of 5-fluorouracil pellets by ethylcellulose and pectin powder mixture (8:3 weight ratio) in capsule at simulated gastrointestinal media provides colon-specific drug release in vitro. This study probes into pharmacodynamic and pharmacokinetic profiles of intra-capsular pellets coated in vivo in rats with reference to their site-specific drug release outcomes. The pellets were prepared by extrusion-spheronization technique. In vitro drug content, drug release, in vivo pharmacokinetics, local colonic drug content, tumor, aberrant crypt foci, systemic hematology and clinical chemistry profiles of coated and uncoated pellets were examined against unprocessed drug. In vivo pellet coating led to reduced drug bioavailability and enhanced drug accumulation at colon (179.13 μg 5-FU/g rat colon content vs 4.66 μg/g of conventional in vitro film-coated pellets at 15 mg/kg dose). The in vivo coated pellets reduced tumor number and size, through reforming tubular epithelium with basement membrane and restricting expression of cancer from adenoma to adenocarcinoma. Unlike uncoated pellets and unprocessed drug, the coated pellets eliminated aberrant crypt foci which represented a putative preneoplastic lesion in colon cancer. They did not inflict additional systemic toxicity. In vivo pellet coating to orally target 5-fluorouracil delivery at cancerous colon is a feasible therapeutic treatment approach.

Matched MeSH terms: Tablets, Enteric-Coated

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links