Displaying publications 1 - 20 of 1298 in total

Abstract:
Sort:
  1. Robust image signal-to-noise ratio estimation using mixed Lagrange time delay estimation autoregressive model
    Sim KS, Cheng Z, Chuah HT
    Scanning, 2004 12 23;26(6):287-95.
    PMID: 15612206
    A new technique based on the statistical autoregressive (AR) model has recently been developed as a solution to signal-to-noise (SNR) estimation in scanning electron microscope (SEM) images. In the present study, we propose to cascade the Lagrange time delay (LTD) estimator with the AR model. We call this technique the mixed Lagrange time delay estimation autoregressive (MLTDEAR) model. In a few test cases involving different images, this model is found to present an optimum solution for SNR estimation problems under different noise environments. In addition, it requires only a small filter order and has no noticeable estimation bias. The performance of the proposed estimator is compared with three existing methods: simple method, first-order linear interpolator, and AR-based estimator over several images. The efficiency of the MLTDEAR estimator, being more robust with noise, is significantly greater than that of the other three methods.
    Matched MeSH terms: Microscopy, Electron, Scanning
  2. Fulltext Effect of fat types on the structural and textural properties of dough and semi-sweet biscuit
    Mamat H, Hill SE
    J Food Sci Technol, 2014 Sep;51(9):1998-2005.
    PMID: 25190856 DOI: 10.1007/s13197-012-0708-x
    Fat is an important ingredient in baking products and it plays many roles in providing desirable textural properties of baking products, particularly biscuit. In this study, the effect of fat types on dough rheological properties and quality of semi-sweet biscuit (rich tea type) were investigated using various techniques. Texture profile and extensibility analysis were used to study the dough rheology, while three-point bend test and scanning electron microscopy were used to analyse the textural characteristics of final product. TPA results showed that the type of fat significantly influenced dough textural properties. Biscuit produced with higher solid fat oil showed higher breaking force but this was not significantly different when evaluated by sensory panel. Scanning electron microscopy showed that biscuit produced with palm mid-fraction had an open internal microstructure and heterogeneous air cells as compared to other samples.
    Matched MeSH terms: Microscopy, Electron, Scanning
  3. Fulltext Morphological data of the genus Lejeunea (Marchantiophyta: Lejeuneaceae) in the Malesian region
    Lee GE
    Data Brief, 2020 Feb;28:104958.
    PMID: 31890799 DOI: 10.1016/j.dib.2019.104958
    The morphological data of Malesian Lejeunea is described in detail based on examination of about 600 fresh specimens and 1500 herbarium specimens of Lejeunea from other herbaria. Scanning electron microscopy (SEM) images and photographs illustrating the characters of Lejeunea are presented.
    Matched MeSH terms: Microscopy, Electron, Scanning
  4. Local dynamic range compensation for scanning electron microscope imaging system
    Sim KS, Huang YH
    Scanning, 2015 Nov-Dec;37(6):381-8.
    PMID: 25969945 DOI: 10.1002/sca.21226
    This is the extended project by introducing the modified dynamic range histogram modification (MDRHM) and is presented in this paper. This technique is used to enhance the scanning electron microscope (SEM) imaging system. By comparing with the conventional histogram modification compensators, this technique utilizes histogram profiling by extending the dynamic range of each tile of an image to the limit of 0-255 range while retains its histogram shape. The proposed technique yields better image compensation compared to conventional methods.
    Matched MeSH terms: Microscopy, Electron, Scanning
  5. Six marine thecate Heterocapsa (Dinophyceae) from Malaysia, including the description of three novel species and their cytotoxicity potential
    Hanifah AH, Teng ST, Law IK, Abdullah N, Chiba SUA, Lum WM, et al.
    Harmful Algae, 2022 Dec;120:102338.
    PMID: 36470602 DOI: 10.1016/j.hal.2022.102338
    Thirty-four strains of Heterocapsa were established from Malaysian waters and their morphologies were examined by light, scanning, and transmission electron microscopy. Three species, H. bohaiensis, H. huensis, and H. rotundata, and three new species, H. borneoensis sp. nov., H. limii sp. nov., and H. iwatakii sp. nov. were described in this study. The three species were differentiated morphologically by unique characteristics of cell size, shape, displacement of the cingulum, shape and position of nucleus, the number and position of pyrenoids, and body scale ultrastructure. The species delimitations were robustly supported by the molecular data. A light-microscopy-based key to species of Heterocapsa is established, with two major groups, i.e., species with a single pyrenoid, and species with multiple pyrenoids. Bioassays were conducted by exposing Artemia nauplii to Heterocapsa densities of 1-5 × 105 cells mL-1, and treatments exposed to H. borneoensis showed naupliar mortality, while no naupliar death was observed in the treatments exposed to cells of H. bohaiensis, H. huensis, H. limii, and H. iwatakii. Naupliar death was observed during the initial 24 h for both tested H. borneoensis strains, and mortality rates increased up to 50% after 72-h exposure. This study documented for the first time the diversity and cytotoxic potency of Heterocapsa species from Malaysian waters.
    Matched MeSH terms: Microscopy, Electron, Transmission
  6. Fulltext SARS-CoV-2 Morphometry Analysis and Prediction of Real Virus Levels Based on Full Recurrent Neural Network Using TEM Images
    Taha BA, Mashhadany YA, Al-Jumaily AHJ, Zan MSDB, Arsad N
    Viruses, 2022 Oct 28;14(11).
    PMID: 36366485 DOI: 10.3390/v14112386
    The SARS-CoV-2 virus is responsible for the rapid global spread of the COVID-19 disease. As a result, it is critical to understand and collect primary data on the virus, infection epidemiology, and treatment. Despite the speed with which the virus was detected, studies of its cell biology and architecture at the ultrastructural level are still in their infancy. Therefore, we investigated and analyzed the viral morphometry of SARS-CoV-2 to extract important key points of the virus's characteristics. Then, we proposed a prediction model to identify the real virus levels based on the optimization of a full recurrent neural network (RNN) using transmission electron microscopy (TEM) images. Consequently, identification of virus levels depends on the size of the morphometry of the area (width, height, circularity, roundness, aspect ratio, and solidity). The results of our model were an error score of training network performance 3.216 × 10-11 at 639 epoch, regression of -1.6 × 10-9, momentum gain (Mu) 1 × 10-9, and gradient value of 9.6852 × 10-8, which represent a network with a high ability to predict virus levels. The fully automated system enables virologists to take a high-accuracy approach to virus diagnosis, prevention of mutations, and life cycle and improvement of diagnostic reagents and drugs, adding a point of view to the advancement of medical virology.
    Matched MeSH terms: Microscopy, Electron, Transmission
  7. Extraction and characterization of cellulose nanoparticles from palm kernel meal for potential application in active food packaging
    Chamathka WWDR, Chai TT, Phuah ET, Wong JX, Chen SN, Yassoralipour A
    Int J Biol Macromol, 2024 Mar;260(Pt 2):129637.
    PMID: 38262554 DOI: 10.1016/j.ijbiomac.2024.129637
    The research aimed to explore the potential of palm kernel meal (PKM) as a sustainable source of cellulose nanoparticles (CNPs) for active food packaging. The CNPs were isolated using a combination of chemical techniques, such as alkaline treatment, bleaching, and acid hydrolysis. The characterization of the CNPs was analysed using various techniques, including scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction, and UV-visible spectroscopy. The findings revealed that chemical processing effectively removed lignin and hemicellulose from PKM. The SEM morphology confirmed the separation of the CNPs, resulting in the production of 40-100 nm spherical cellulose nanoparticles, while XRD and FTIR analyses confirmed their purity and composition. Moreover, the UV-visible spectroscopy exhibited high transmittance rates, indicating the potential of CNPs as reinforcing agents for polymer matrices. The significance of utilising PKM as a valuable fibre source for extracting CNPs can be recommended for developing active food packaging.
    Matched MeSH terms: Microscopy, Electron, Scanning
  8. The first record of the giant pill-millipede genus Prionobelum Verhoeff, 1924 from Thailand, with the integrative description of two species (Diplopoda, Sphaerotheriida, Zephroniidae)
    Donworth P, Wesener T
    Zootaxa, 2024 Mar 08;5419(4):545-562.
    PMID: 38480309 DOI: 10.11646/zootaxa.5419.4.4
    Thailand hosts a very rich but underexplored giant pill-millipede (Sphaerotheriida) fauna, with 11 of its 13 species described in the last three years. Currently, all known Thai giant pill-millipedes belong to the genera Zephronia Gray, 1832 (nine species) and Sphaerobelum Verhoeff, 1924 (four species). Here we describe the first two species of the genus Prionobelum Verhoeff, 1924 (previously restricted to Vietnam and China), Prionobelum inthanonense n. sp. and P. naevium n. sp. from Thailand. The species occur at Thailands highest mountain (2500 m) Doi Inthanon and the lowland rainforests at Bang Lang National Park touching the border with Malaysia. Both species are described integratively, utilizing light microscopy, scanning electron microscopy as well as DNA barcoding. Both new species of Prionobelum differ from other Zephroniidae species, as well as from one another, by more than 20% p-distance in the COI barcoding gene suggesting that potential closer related species are still awaiting discovery.
    Matched MeSH terms: Microscopy, Electron, Scanning
  9. Microwave-stimulated fixation for electron microscopy using a domestic microwave oven
    Ng KH, Gan SK
    Malays J Pathol, 1990 Jun;12(1):27-33.
    PMID: 2090887
    We investigated microwave-stimulated fixation of tissues for transmission electron microscopy using a domestic microwave oven operating at a frequency of 2.45 GHz with an output power of 500W. Microwave-stimulated fixation, in 4% glutaraldehyde, of fresh rat kidney, liver, heart and brain tissues was compared to conventional fixation. Human renal biopsies were similarly studied. Electron microscopy showed excellent ultrastructural preservation comparable to that obtained by conventional fixation. The optimal temperature range for microwave-stimulated fixation was found to lie between 50 degrees C and 55 degrees C. Our results indicate that microwave-stimulated fixation is a rapid and reproducible technique and can be effectively applied to routine diagnostic pathology.
    Matched MeSH terms: Microscopy, Electron*
  10. Occurrence and ultrastructural surface of Blastocystis isolated from water sources in Kedah and Penang, Malaysia
    Attah AO, Ong KY, Sanggari A, Lee IL, Nik Him NAII, Ismail AH, et al.
    Trop Biomed, 2024 Sep 01;41(3):370-376.
    PMID: 39548792 DOI: 10.47665/tb.41.3.018
    Blastocystis is a ubiquitous waterborne parasite that has been implicated in some disease conditions including colorectal cancer and irritable bowel syndrome, and its surface coat characteristics have been associated with its pathogenicity. Although the morphology of Blastocystis isolates from human and animal sources have been studied, there is a paucity of data on the surface ultrastructure of Blastocystis isolated from water sources. Therefore, this study aimed to determine the occurrence and the ultrastructural surface of Blastocystis isolates from several water sources in Kedah and Penang, Malaysia. A total of 12 water samples were collected, namely, Pinang River and USM Harapan Lake all in Penang, whereas Lata Bayu Waterfall in Baling and UniSHAMS Lake, Kuala Ketil in Kedah. These were examined for Blastocystis by centrifugation and in vitro cultivation. Scanning electron microscopy (SEM) and light microscopy were employed to study the morphological characteristics and the surface ultrastructure of the parasite. Polymerase chain reaction (PCR) was carried out to obtain the subtypes (ST) of the positive Blastocystis isolates. The result revealed 25.0% (3/12) contamination with Blastocystis in which ST1, ST2, and an unknown ST (with a high similarity to ST1) were detected in water samples from the upstream, downstream, and midstream, respectively of Pinang River. Our study also revealed similarities in the sizes of the isolates from different river points, which were notably more diminutive compared to the sizes of the parasites observed in existing data from human and animal isolates. The surface characteristics showed a collection of single and dividing cells with smooth, folded surfaces enclosed in a film-like layer. Additionally, there were roundish, irregularly shaped cells with rough surfaces, and a woolly appearance. This study has added to our knowledge of the surface ultrastructure of Blastocystis and its possible contribution to the pathogenicity of the parasite.
    Matched MeSH terms: Microscopy, Electron, Scanning*
  11. Fulltext Hierarchical Si/ZnO trunk-branch nanostructure for photocurrent enhancement
    Dee CF, Chong SK, Rahman SA, Omar FS, Huang NM, Majlis BY, et al.
    Nanoscale Res Lett, 2014;9(1):469.
    PMID: 25246872 DOI: 10.1186/1556-276X-9-469
    Hierarchical Si/ZnO trunk-branch nanostructures (NSs) have been synthesized by hot wire assisted chemical vapor deposition method for trunk Si nanowires (NWs) on indium tin oxide (ITO) substrate and followed by the vapor transport condensation (VTC) method for zinc oxide (ZnO) nanorods (NRs) which was laterally grown from each Si nanowires (NWs). A spin coating method has been used for zinc oxide (ZnO) seeding. This method is better compared with other group where they used sputtering method for the same process. The sputtering method only results in the growth of ZnO NRs on top of the Si trunk. Our method shows improvement by having the growth evenly distributed on the lateral sides and caps of the Si trunks, resulting in pine-leave-like NSs. Field emission scanning electron microscope image shows the hierarchical nanostructures resembling the shape of the leaves of pine trees. Single crystalline structure for the ZnO branch grown laterally from the crystalline Si trunk has been identified by using a lattice-resolved transmission electron microscope. A preliminary photoelectrochemical (PEC) cell testing has been setup to characterize the photocurrent of sole array of ZnO NR growth by both hydrothermal-grown (HTG) method and VTC method on ITO substrates. VTC-grown ZnO NRs showed greater photocurrent effect due to its better structural properties. The measured photocurrent was also compared with the array of hierarchical Si/ZnO trunk-branch NSs. The cell with the array of Si/ZnO trunk-branch NSs revealed four-fold magnitude enhancement in photocurrent density compared with the sole array of ZnO NRs obtain from VTC processes.
    Matched MeSH terms: Microscopy, Electron, Scanning; Microscopy, Electron, Transmission
  12. Fulltext Mechanical and morphological properties of polypropylene/nano α-Al2O3 composites
    Mirjalili F, Chuah L, Salahi E
    ScientificWorldJournal, 2014;2014:718765.
    PMID: 24688421 DOI: 10.1155/2014/718765
    A nanocomposite containing polypropylene (PP) and nano α-Al2O3 particles was prepared using a Haake internal mixer. Mechanical tests, such as tensile and flexural tests, showed that mechanical properties of the composite were enhanced by addition of nano α-Al2O3 particles and dispersant agent to the polymer. Tensile strength was approximately ∼ 16% higher than pure PP by increasing the nano α-Al2O3 loading from 1 to 4 wt% into the PP matrix. The results of flexural analysis indicated that the maximum values of flexural strength and flexural modulus for nanocomposite without dispersant were 50.5 and 1954 MPa and for nanocomposite with dispersant were 55.88 MPa and 2818 MPa, respectively. However, higher concentration of nano α-Al2O3 loading resulted in reduction of those mechanical properties that could be due to agglomeration of nano α-Al2O3 particles. Transmission and scanning electron microscopic observations of the nanocomposites also showed that fracture surface became rougher by increasing the content of filler loading from 1 to 4% wt.
    Matched MeSH terms: Microscopy, Electron, Scanning; Microscopy, Electron, Transmission
  13. Effect of plasmolysis on protocorm-like bodies of Dendrobium Bobby Messina orchid following cryopreservation with encapsulation-dehydration method
    Antony JJ, Mubbarakh SA, Mahmood M, Subramaniam S
    Appl Biochem Biotechnol, 2014 Feb;172(3):1433-44.
    PMID: 24218184 DOI: 10.1007/s12010-013-0636-x
    Histological observation and scanning electron microscopy analyses in Dendrobium Bobby Messina indicates the cellular process of cryopreserved protocorm-like bodies (PLBs) was different comparative to non-cryopreserved PLBs. The cellular process was not only modified by the freezing and thawing effect but also due to the dehydration process itself during the cryopreservation procedure. Histological observation in Dendrobium Bobby Messina in encapsulation-dehydration method indicated that the degree of plasmolysis causes more cellular changes to the cryopreserved PLBs comparative to non-cryopreserved and stock culture PLBs. These results revealed higher amount of homogenous cell population and denser cytoplasm in cryopreserved PLBs. Histological analysis also revealed more voluminous nucleus in cryopreserved PLBs comparative to non-cryopreserved PLBs and PLBs stock culture. In contrast, scanning electron microscope analysis showed severe damages in cryopreserved PLBs and non-cryopreserved PLBs comparative to the PLBs stock culture which in return could be the possible reason of no regrowth in encapsulation-dehydration method. Damages incurred were on top part, side part, and at the stomata of the PLBs. Histological observation and scanning electron microscopy analyses in Dendrobium Bobby Messina indicates that the degree of plasmolysis causes changes in the cellular process of PLBs from cryopreserved PLBs was different comparative to non-cryopreserved PLBs.
    Matched MeSH terms: Microscopy, Electron, Scanning*
  14. Fulltext Improvement to the scanning electron microscope image colorization by adaptive tuning
    Sim KS, Ting HY, Lai MA, Tso CP
    J Microsc, 2009 Jun;234(3):243-50.
    PMID: 19493101 DOI: 10.1111/j.1365-2818.2009.03167.x
    An improvement to the previously proposed Canny optimization technique for scanning electron microscope image colorization is reported. The additional process is adaptive tuning, where colour tuning is performed adaptively, based on comparing the original luminance values with calculated luminance values. The complete adaptive Canny optimization technique gives significantly better mechanical contrast on scanning electron microscope grey-scale images than do existing methods.
    Matched MeSH terms: Microscopy, Electron, Scanning/methods*
  15. Fulltext Lagrange time delay estimation for scanning electron microscope image magnification
    Sim KS, Thong LW, Ting HY, Tso CP
    J Microsc, 2010 Feb;237(2):111-8.
    PMID: 20096041 DOI: 10.1111/j.1365-2818.2009.03325.x
    Interpolation techniques that are used for image magnification to obtain more useful details of the surface such as morphology and mechanical contrast usually rely on the signal information distributed around edges and areas of sharp changes and these signal information can also be used to predict missing details from the sample image. However, many of these interpolation methods tend to smooth or blur out image details around the edges. In the present study, a Lagrange time delay estimation interpolator method is proposed and this method only requires a small filter order and has no noticeable estimation bias. Comparing results with the original scanning electron microscope magnification and results of various other interpolation methods, the Lagrange time delay estimation interpolator is found to be more efficient, more robust and easier to execute.
    Matched MeSH terms: Microscopy, Electron, Scanning/methods*
  16. Exploring the effect of cellulose nanowhiskers isolated from oil palm biomass on polylactic acid properties
    Haafiz MK, Hassan A, Khalil HP, Fazita MR, Islam MS, Inuwa IM, et al.
    Int J Biol Macromol, 2016 Apr;85:370-8.
    PMID: 26772914 DOI: 10.1016/j.ijbiomac.2016.01.004
    In this work, polylactic acid (PLA) reinforced cellulose nanowhiskers (CNW) were prepared through solution casting technique. The CNW was first isolated from oil palm empty fruit bunch microcrystalline cellulose (OPEFB-MCC) by using 64% H2SO4 and was designated as CNW-S. The optical microscopy revealed that the large particle of OPEFB-MCC has been broken down by the hydrolysis treatment. The atomic force microscopy confirmed that the CNW-S obtained is in nanoscale dimension and appeared in individual rod-like character. The produced CNW-S was then incorporated with PLA at 1, 3, and 5 parts per hundred (phr) resins for the PLA-CNW-S nanocomposite production. The synthesized nanocomposites were then characterized by a mean of tensile properties and thermal stability. Interestingly to note that incorporating of 3 phr/CNW-S in PLA improved the tensile strength by 61%. Also, CNW-S loading showed a positive impact on the Young's modulus of PLA. The elongation at break (Eb) of nanocomposites, however, decreased with the addition of CNW-S. Field emission scanning electron microscopy and transmission electron microscopy revealed that the CNW-S dispersed well in PLA at lower filler loading before it started to agglomerate at higher CNW-S loading (5phr). The DSC analysis of the nanocomposites obtained showed that Tg,Tcc and Tm values of PLA were improved with CNW-S loading. The TGA analysis however, revealed that incopreated CNW-S in PLA effect the thermal stability (T10,T50 and Tmax) of nanocomposite, where it decrease linearly with CNW-S loading.
    Matched MeSH terms: Microscopy, Electron, Scanning; Microscopy, Electron, Transmission
  17. Morphological study of synthesized RGO/ Pt nanocomposites via facile chemical reduction method
    Mohamad Fahrul Radzi Hanifah, Juhana Jaafar, Madzlan Aziz, Mohd Hafiz Dzarfan Othman, Mukhlis A. Rahman, Ahmad Fauzi Ismail, et al.
    Sains Malaysiana, 2017;46:629-635.
    Reduced graphene oxide nanosheet (RGO)/Pt nanocomposite have been successfully prepared through a facile chemical reduction method. The reduction of Pt precursor was carried out using sodium borohydride as the efficient chemical reductant. The morphology of RGO/Pt nanocomposite was investigated using high resolution transmission electron microscopy (HRTEM) and field emission scanning electron microscopy (FESEM). HRTEM analysis showed that platinum nanoparticles were homogenously distributed onto the surface of RGO. The electrochemical study proved that Pt nanoparticles were successfully incorporated onto RGO. Therefore, it can be concluded that the proposed method could provide well-dispersed of Pt nanoparticles onto RGO to form RGO/ Pt nanocomposite.
    Matched MeSH terms: Microscopy, Electron, Scanning; Microscopy, Electron, Transmission
  18. Fulltext Assessments of Secondary Reinforcement of Epoxy Matrix-Glass Fibre Composite Laminates through Nanosilica (SiO₂)
    Lazar PJL, Sengottuvelu R, Natarajan E
    Materials (Basel), 2018 Nov 05;11(11).
    PMID: 30400592 DOI: 10.3390/ma11112186
    The principal objective of this research work was to investigate the results of impregnating epoxy matrix-glass fibre composite laminates with nanosilica as secondary reinforcement. 0.5, 0.75, 1 and 3 wt% nanosilica was used and thereafter properties of composites were assessed through tensile, three point bending, quasi static indentation tests and dynamic mechanical analysis. Scanning electron microscope examinations were done on fracture surfaces and failure modes were analyzed. The internal failures of the composite due to quasi-static indentation were evaluated through C-Scan. Among samples of different weight fractions, 0.75 wt% nanosilica reinforced composite laminates exhibited substantial increase of 42% in tensile strength and 39.46% in flexural strength. The reduction in glass transition temperature (Tg), increase in storage modulus (E'), loss modulus (E″) and damping factor (tan δ) were also observed. Quasi-static indentation assessments revealed that energy absorption property was enhanced significantly by 53.97%. Hence nanosilica up to 0.75 wt% can be used as a potential candidate for secondary reinforcement in epoxy composite laminates.
    Matched MeSH terms: Microscopy, Electron, Scanning; Microscopy, Electron, Transmission
  19. Effect of synthesis condition on the growth of SWCNTs via catalytic chemical vapour deposition
    Toussi SM, Fakhru’L-Razi A, Luqman Chuah A, Suraya A
    Sains Malaysiana, 2011;40.
    Single-walled carbon nanotubes (SWCNTs) were synthesized by catalytic chemical vapor deposition (CCVD) of ethanol (C2H5OH) over Fe-Mo-MgO catalyst by using argon as a carrier gas. The reaction conditions are important factors that influence the yield and quality of carbon nanotubes. The effects of temperature and flow rate of carrier gas were investigated to increase the yield of carbon nanotubes. The synthesized carbon nanotubes were characterized by scanning electron microscopy, transmission electron microscopy, X-Ray diffraction and thermo-gravimetric analysis. The results showed that the growth of carbon nanotubes was effectively influenced by the reaction ambience and the synthesis condition. The temperature and flow rate of carrier gas played a key role in the yield and quality of synthesized CNTs. The estimated yield of synthesized carbon nanotubes was almost over 70%.
    Matched MeSH terms: Microscopy, Electron, Scanning; Microscopy, Electron, Transmission
  20. Fulltext Minimum inhibitory concentration of nano-silver bactericides for beneficial microbes and its effect on Ralstonia solanacearum and seed germination of Japanese Cucumber (Cucumis sativus)
    Sotoodehnia P, Mazlan N, Mohd Saud H, Samsuri WA, Habib SH, Soltangheisi A
    PeerJ, 2019;7:e6418.
    PMID: 30918747 DOI: 10.7717/peerj.6418
    Background: Plant growth-promoting rhizobacteria (PGPR) are highly promising biofertilizers that contribute to eco-friendly sustainable agriculture. There have been many reports on the anti-microbial properties of nanoparticles (NPs). Toxic effects of NPs under laboratory conditions have also reported; however, there is a lack of information about their uptake and mobility in organisms under environmental conditions. There is an urgent need to determine the highest concentration of NPs which is not detrimental for growth and proliferation of PGPR.

    Methods: Transmission electron microscopy (TEM) and scanning electron microscopy (SEM) were used to measure the size and shape of NPs. Minimum inhibitory concentrations (MIC) of nano-silver on selected beneficial microbes and Ralstonia solanacearum were measured using the microdilution broth method. The percentage of seed germination was measured under in vitro conditions.

    Results: NPs were spherical with a size of 16 ± 6 nm. Nano-silver at 12-40 mg l-1 inhibited the growth of bacteria. Seed application at 40 mg l-1 protected seeds from R. solanacearum and improved the rate of seed germination.

    Matched MeSH terms: Microscopy, Electron, Scanning; Microscopy, Electron, Transmission
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links