Displaying publications 1 - 20 of 258 in total

Abstract:
Sort:
  1. Modification methods toward the production of porous starch: a review
    Hj Latip DN, Samsudin H, Utra U, Alias AK
    Crit Rev Food Sci Nutr, 2021;61(17):2841-2862.
    PMID: 32648775 DOI: 10.1080/10408398.2020.1789064
    Starch is a complex carbohydrate formed by the repeating units of glucose structure connected by the alpha-glycosidic linkages. Starch is classified according to their derivatives such as cereals, legumes, tubers, palms, fruits, and stems. For decades, native starch has been widely utilized in various applications such as a thickener, stabilizer, binder, and coating agent. However, starches need to be modified to enhance their properties and to make them more functional in a wide range of applications. Porous starch is a modified starch product which has attracted interest of late. It consists of abundant pores that are distributed on the granule surface without compromising the integrity of its granular structure. Porous starch can be produced either by enzymatic, chemical, and physical methods or a combination thereof. The type of starch and selection of the modification method highly influence the formation of pore structure. By carefully choosing a suitable starch and modification method, the desired morphology of porous starch can be produced and applied accordingly for its intended application. Innovations and technologies related to starch modification methods have evolved over the years in terms of the structure, properties and modification effects of different starch varieties. Therefore, this article reviews recent modification methods in developing porous starch from various origins.
    Matched MeSH terms: Starch*
  2. Synthesis of natural starch from Elaeis guineensis trunk biomass applying bisulphite steeping method: Optimization by RSM
    Ahmed Z, Yusoff MS, N H MK, Abdul Aziz H
    J Air Waste Manag Assoc, 2022 01;72(1):116-130.
    PMID: 33872123 DOI: 10.1080/10962247.2021.1919240
    A massive quantity of Elaeis guineensis (oil palm) trunk biomass, containing a significant amount of natural starch, is available in Malaysia as biowaste because of annual replantation. The efficient extraction of this starch (carbohydrate polymer) would be worthwhile concerning the environmental sustainability and economy through conversion to bioresources. This study investigated the effectiveness of the bisulfite steeping method for starch synthesis from oil palm trunk (OPT) biowaste. The central composite design (CCD) of Design-Expert software executed an experimental model design, data analysis, evaluated the impacts of process variables and their interaction through response surface methodology to optimize the bisulfite steeping method for starch synthesis. The developed quadratic models for four factors (strength of sodium bisulfite solution, steeping hour, mixing ratio with the bisulfite solution, and ultrapure water) and one response (%Yield) demonstrated that a significant starch yield (13.54%) is achievable employing 0.74% bisulfite solution, 5.6 steeping hours, for 1.6 and 0.6 mixing ratio with the bisulfite solution and ultrapure water respectively. Experimental outcomes were consistent with the predicted model, which eventually sustains the significance of this method. Malvern Zetasizer test revealed a bimodal granular distribution for starch, with 7.15 µm of hydrodynamic size. Starch morphology was determined by scanning electron microscopy. X-ray diffraction investigation exhibits an A-type model, specifying persistent characteristics, while FTIR confirms the presence of hydroxyl, carboxylic, and phenolic groups like other cereal starches.Implications: Malaysia is the 2nd largest palm oil exporter in the world. About 110 million tons of palm oil trunk (OPT) biomass is available annually during replanting activities. Modification of bio-wastes into a beneficial form (only 22% presently) like starch extraction would ensure potential reuse as a natural coagulant for wastewater and leachate treatment, food source, adhesives towards boosting the country's economy by sustainable waste management. The current study achieved better starch yield (13.54%) than previous, from the OPT biomass through the novel bisulfite steeping method. Therefore, this method will ascertain the effective implication of numerous economic activities.
    Matched MeSH terms: Starch*
  3. Fulltext Physico-chemical and Sensory Properties of Red Palm Oil-based Ice Cream Using Maltodextrin or Modified Starch as Stabilizers
    Zaini NSM, Mansor N, Yusoff MM, Rahim MHA
    J Oleo Sci, 2023 Aug 31;72(9):811-818.
    PMID: 37574285 DOI: 10.5650/jos.ess23036
    This study highlights the use of red palm oil (RPO) as an alternative to dairy fat in a hard ice cream sample in the presence of different stabilizers; maltodextrin (MALTOD) and modified starch (MSTARCH). No stabilizer was added in the control sample (CO), while the different ratios of RPO to each stabilizer were 4:1, 3:2, and 2:3, coded as MALTOD1, MALTOD2, MALTOD3 for maltodextrin, and MSTARCH1, MSTARCH2, and MSTARCH3 for modified starch, respectively. These samples were compared regarding overrun, physical, and sensory properties. For MALTOD, sample MALTOD3 had the highest overrun (49.31±13.78%), while MALTOD2 had the highest viscosity (7.90±0.03 Pa.s) and hardness (1.09±0.07 kg), and MALTOD1 had the lowest melting properties (61.10±0.20%). For MSTARCH, sample MSTARCH1 had the highest hardness (3.39±0.07 kg), MSTARCH2 had the highest overrun (67.64±2.27%), and MSTARCH3 had the highest viscosity (8.19±0.24 Pa.s) and the lowest melting properties (39.83±0.20%). Samples MALTOD3 and MSTARCH1 were selected for comparison with commercial samples in terms of sensory acceptance and preference. There was no significant difference (p > 0.05) between the sensory acceptability of MALTOD3 and MSTARCH1. However, both samples received a significantly lower (p < 0.05) ranking than the commercial samples in terms of appearance, texture, flavour, meltability, and overall acceptance. Future studies are recommended to improve the RPO-based ice cream sample, particularly in terms of its sensory properties.
    Matched MeSH terms: Starch*
  4. Application of different feeding strategies in fed batch culture for pullulanase production using sago starch
    R S, M S M, E M S, K O NA, A A S, K K
    Carbohydr Polym, 2014 Feb 15;102:962-9.
    PMID: 24507370 DOI: 10.1016/j.carbpol.2013.10.031
    The production of pullulanase by Bacillus flavothermus KWF-1 in batch and fed batch culture were compared using 2L bioreactor. In batch culture, 0.0803 U/mL of pullulanase activity with specific activity of 0.0213 U/mg was produced by controlling the agitation speed and temperature at 200 rpm and 50 °C, respectively. Fed batch production was studied by feeding the culture with different sago starch concentrations in various feeding modes for enhanced pullulanase production. Exponential feeding mode at dilution rate of 0.01/h was the preeminent strategy for enhanced pullulanase production of 0.1710 U/mL with specific activity of 0.066 U/mg. It had shown an increment of pullulanase production and specific activity by 2.1 and 3.1-fold, respectively when compared to batch culture. Increment of pullulanase activity in exponential feeding mode improved hydrolyzation of sago starch into maltotriose and panose by 4.5 and 2.5-fold respectively compared to batch system.
    Matched MeSH terms: Starch/metabolism*
  5. Preparation and characterization of bioplastics from silylated cassava starch and epoxidized soybean oils
    Yang J, Xu S, Wang W, Ran X, Ching YC, Sui X, et al.
    Carbohydr Polym, 2023 Jan 15;300:120253.
    PMID: 36372510 DOI: 10.1016/j.carbpol.2022.120253
    In this work, a systematic coupling study of silane coupling agent between starch and epoxidized soybean oils (ESO) was carried out. Starch was modified by 3-aminopropyl trimethoxy silane (APMS) with various contents of NaOH. The APMS-modified starch was incorporated with ESO to synthesize the bioplastics by solution casting. As demonstrated by the FTIR spectra, the hydrogen bond interactions among starch molecules were inhibited by the modification. This outcome provided higher interaction and compatibility of starch with ESO, as confirmed by FESEM. TGA showed that the thermal stability of starch decreased considerably after the silylation. In contrast, the produced bioplastics with silylated starch exhibited higher thermal stability than the control sample. Regarding the bioplastics, an obvious increase of tensile strength from 5.78 MPa to 9.29 MPa was obtained. This work suggested a simple and effective modification technique by APMS to improve compatibility of starch/ESO-based bioplastics with superior mechanical and thermal properties.
    Matched MeSH terms: Starch/chemistry
  6. Fulltext Extraction of non-starch lipid from protease-treated wheat flour
    Abdul Manan SF, Li J, Hsieh CF, Faubion J, Shi YC
    J Sci Food Agric, 2022 Mar 30;102(5):2172-2178.
    PMID: 34498279 DOI: 10.1002/jsfa.11523
    BACKGROUND: Lipids account for 2.0-2.5% of wheat flour by dry weight and affect properties and quality of cereal foods. A new method was developed to extract non-starch lipids from wheat flour. Wheat flour was first hydrolyzed with a protease and followed by extraction of non-starch lipids by water-saturated butanol (WSB).

    RESULT: Protein hydrolysis by protease followed by extraction of non-starch lipids with WSB increased yield to 1.9 ± 0.3% from 1.0 ± 0.1% with no protease treatment. The lipid profile showed a significant increase in phospholipid compounds extracted with protease hydrolysis (5.9 ± 0.8 nmol·g-1 ) versus without enzymatic treatment (2.4 ± 1.3 nmol g-1 ).

    CONCLUSION: Improved lipid extraction yield and phospholipid compounds following protease-assisted extraction method provided additional insight towards the understanding of protein-lipid interaction in wheat flour. The new protease-assisted extraction method may be applied to analyzing non-starch lipids in other types of wheat flours and other cereal flours. © 2021 Society of Chemical Industry.

    Matched MeSH terms: Starch/chemistry
  7. Facile preparation of high-performance plywood adhesive from gelatinized corn starch crosslinked with ammonium dihydrogen phosphate
    Jia Y, Luo B, Lee SH, Huang H, Wu Z, Zhou B, et al.
    Int J Biol Macromol, 2024 Jan;256(Pt 2):128548.
    PMID: 38043656 DOI: 10.1016/j.ijbiomac.2023.128548
    A flame retardant high-performance gelatinized starch (GS)-ammonium dihydrogen phosphate (ADP) wood adhesive, named GS-ADP adhesive was prepared by condensation of GS and ADP under acidic condition. The preparation process of GS-ADP adhesive is very simple by mixing and stirring GS and ADP evenly at room temperature. The results revealed that the GS-ADP adhesive has good storage stability and water resistance, and its wet shear strength is much higher than that of phenolic resin (PF) adhesive. Markedly, the cone calorimeter test results show that G-ADP adhesive has good flame retardancy, and the plywood based on GS-ADP adhesive has good flame retardancy. Meanwhile, it can be seen from dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA) that GS-ADP has excellent modulus of elasticity (MOE), high glass transition temperature (Tg) and good thermal stability. The findings suggest that GS-ADP could be a viable substitute for PF resin in structural wood fabrication.
    Matched MeSH terms: Starch*
  8. Direct production of polyhydroxybutyrate from waste starch by newly-isolated Bacillus aryabhattai T34-N4
    Bomrungnok W, Arai T, Yoshihashi T, Sudesh K, Hatta T, Kosugi A
    Environ Technol, 2020 Nov;41(25):3318-3328.
    PMID: 30987543 DOI: 10.1080/09593330.2019.1608314
    Polyhydroxybutyrate (PHB) is a natural microbial polyester produced by a variety of bacteria and archaea from renewable resources. PHB resembles some petrochemical plastics but is completely biodegradable. It is desirable to identify suitable microbial strains and develop processes that can directly use starch from agricultural wastes without commercial amylase treatment. Here, PHB production using starch from agricultural waste was developed using a newly isolated strain, Bacillus aryabhattai T34-N4. This strain hydrolyzed cassava pulp and oil palm trunk starch and accumulated up to 17 wt% PHB of the cell dry weight. The α-amylase of this strain, AmyA, showed high activity in the presence of cassava pulp starch (69.72 U) and oil palm trunk starch (70.53 U). High expression of amyA was recorded in the presence of cassava pulp starch, whereas low expression was detected in the presence of glucose. These data suggest that starch saccharification by amyA allows strain T34-N4 to grow and directly produce PHB from waste starch materials such as cassava pulp and oil palm trunk starch, which may be used as low-cost substrates.
    Matched MeSH terms: Starch
  9. Polycaprolactone/starch composite: Fabrication, structure, properties, and applications
    Ali Akbari Ghavimi S, Ebrahimzadeh MH, Solati-Hashjin M, Abu Osman NA
    J Biomed Mater Res A, 2015 Jul;103(7):2482-98.
    PMID: 25407786 DOI: 10.1002/jbm.a.35371
    Interests in the use of biodegradable polymers as biomaterials have grown. Among the different polymeric composites currently available, the blend of starch and polycaprolactone (PCL) has received the most attention since the 1980s. Novamont is the first company that manufactured a PCL/starch (SPCL) composite under the trademark Mater-Bi®. The properties of PCL (a synthetic, hydrophobic, flexible, expensive polymer with a low degradation rate) and starch (a natural, hydrophilic, stiff, abundant polymer with a high degradation rate) blends are interesting because of the composite components have completely different structures and characteristics. PCL can adjust humidity sensitivity of starch as a biomaterial; while starch can enhance the low biodegradation rate of PCL. Thus, by appropriate blending, SPCL can overcome important limitations of both PCL and starch components and promote controllable behavior in terms of mechanical properties and degradation which make it suitable for many biomedical applications. This article reviewed the different fabrication and modification methods of the SPCL composite; different properties such as structural, physical, and chemical as well as degradation behavior; and different applications as biomaterials.
    Matched MeSH terms: Starch/administration & dosage*
  10. Haemoglobin A2 estimations by starch block electrophoresis
    VELLA F
    Med J Malaya, 1959 Sep;14:31-5.
    PMID: 13855207
    Matched MeSH terms: Starch*
  11. Effect of hybridization composition and glycerin content on novel corn starch/nata de coco plastic film: Thermal, mechanical, and degradation study
    Mustapha SNH, Wan JS
    Food Chem, 2022 Mar 30;373(Pt B):131440.
    PMID: 34731804 DOI: 10.1016/j.foodchem.2021.131440
    The objective of this work was to develop a plastic film from food sources with excellent thermal, mechanical, and degradability performance. Corn starch (CS)/nata de coco (NDC) were hybridized with addition of glycerin as plasticizer at different weight ratio and weight percent, respectively. Sample analysis found that the hybridization of CS with NDC improved the film forming properties, mechanical and thermal, degradation properties, as well as hydrophobicity and solubility of the film up to 0.5:0.5 wt hybrid ratio. The properties of the films were highly affected by the homogeneity of the sample during hybridization, with high NDC amount (0.3:0.7 wt CS:NDC) showing poor hydrophobicity, and mechanical and thermal properties. The glycerin content, however, did not significantly affect the hydrophobicity, water solubility, and degradability properties of CS/NDC film. Hybridization of 0.5:0.5 wt CS/NDC with 2 phr glycerin provided the optimum Young's modulus (15.67 MPa) and tensile strength (1.67 MPa) properties.
    Matched MeSH terms: Starch*
  12. Fulltext Fast Melt Cocoa Butter Tablet: Effect of Waxes, Starch, and PEG 6000 on Physical Properties of the Preparation
    Liew KB, Ming LC, Goh BH, Peh KK
    Molecules, 2022 May 13;27(10).
    PMID: 35630605 DOI: 10.3390/molecules27103128
    A fast melt tablet (FMT) is well regarded as an alternative delivery system that might help resolve a patient's non-compliance issue. The main objective of this study was to develop a cocoa butter-based FMT. Additives, namely 5-15% of PEG 6000, beeswax, paraffin wax, and corn starch, were incorporated into the cocoa butter-based FMT to study the effects of these additives with the physical characteristic of a cocoa butter FMT. An optimum-based formulation was chosen according to the desired hardness and disintegration time and the taste masking property achieved with the model drug-dapoxetine. The analysis demonstrated that incorporating beeswax (15%) and paraffin wax (15%) could prolong the disintegration time by at least two-fold. On the contrary, the presence of corn starch was found to cause an increase in the hardness and reduction of the disintegration time. The disintegration mechanism might be presumed due to the synergistic effect of starch swelling and cocoa butter melting. The hardness value and in vitro disintegration time of the optimum formulation were recorded at 2.93 ± 0.22 kg and 151.67 ± 6.98 s. In terms of dissolution, 80% of dapoxetine was released within 30 min and the dissolution profile was comparable to the innovator product. The formulation was palatable and stable for at least 1 year. The exposure of the FMT formulation at 30 °C for 12 months was reported to be stable. Along with the sound palatability profile and high drug load capacity, the current formulation possesses the desired characteristics to be scaled up and marketed.
    Matched MeSH terms: Starch*
  13. Effects of buffer properties on cyclodextrin glucanotransferase reactions and cyclodextrin production from raw sago (Cycas revoluta) starch
    Kamaruddin K, Illias RM, Aziz SA, Said M, Hassan O
    Biotechnol Appl Biochem, 2005 Apr;41(Pt 2):117-25.
    PMID: 15202937
    Results from the present study have shown that the ionic species of buffers, pH values and reaction temperature can affect the enzyme unit activities and product specificity of Toruzyme (Novo Nordisk A/S Bagsvaerd, Denmark) CGTase (cyclodextrin glucanotransferase). Applying a similar reaction environment (acetate buffer, pH 6.0; temperature, 60 degrees C), the CGTase was found to be capable of producing pre dominantly beta-cyclodextrin from either raw or gelatinized sago (Cycas revoluta) starch. Changing the buffer from acetate to phosphate reduced the yield of beta-cyclodextrin from 2.48 to 1.42 mg/ml and also affected the product specificity, where production of both alpha- and beta-cyclodextrins were more pronounced. The decrease in the production of cyclodextrins in phosphate buffer was significant at both pH 6.0 and 7.0. However, changing the buffer to Tris/HCl (pH 7.0) showed a significant increase in beta-cyclodextrin production. Increasing the ionic strength of sodium acetate and Tris/HCl buffers at pH 6.0 and 7.0 to equivalent ionic strength of phosphate buffers showed no significant effects on cyclodextrin production. Higher yield of cyclodextrins at pH 7.0 when Tris/HCl was used might be due to the binding of chloride ions at the calcium-binding sites of the CGTase, resulting in the shift of the optimum pH close to physiological environment, leading to an increase in the activities and specificity.
    Matched MeSH terms: Starch/metabolism*; Starch/chemistry
  14. Effect of seaweed on mechanical, thermal, and biodegradation properties of thermoplastic sugar palm starch/agar composites
    Jumaidin R, Sapuan SM, Jawaid M, Ishak MR, Sahari J
    Int J Biol Macromol, 2017 Jun;99:265-273.
    PMID: 28249765 DOI: 10.1016/j.ijbiomac.2017.02.092
    The aim of this paper is to investigate the characteristics of thermoplastic sugar palm starch/agar (TPSA) blend containing Eucheuma cottonii seaweed waste as biofiller. The composites were prepared by melt-mixing and hot pressing at 140°C for 10min. The TPSA/seaweed composites were characterized for their mechanical, thermal and biodegradation properties. Incorporation of seaweed from 0 to 40wt.% has significantly improved the tensile, flexural, and impact properties of the TPSA/seaweed composites. Scanning electron micrograph of the tensile fracture showed homogeneous surface with formation of cleavage plane. It is also evident from TGA results that thermal stability of the composites were enhanced with addition of seaweed. After soil burial for 2 and 4 weeks, the biodegradation of the composites was enhanced with addition of seaweed. Overall, the incorporation of seaweed into TPSA enhances the properties of TPSA for short-life product application such as tray, plate, etc.
    Matched MeSH terms: Starch/metabolism; Starch/chemistry*
  15. Characteristics of Metroxylon sagu resistant starch type III as prebiotic substance
    Zi-Ni T, Rosma A, Napisah H, Karim AA, Liong MT
    J Food Sci, 2015 Apr;80(4):H875-82.
    PMID: 25739421 DOI: 10.1111/1750-3841.12817
    Resistant starch type III (RS3 ) was produced from sago (Metroxylon sagu) and evaluated for its characteristics as a prebiotic. Two RS3 samples designated sago RS and HCl-sago RS contained 35.71% and 68.30% RS, respectively, were subjected to hydrolyses by gastric juice and digestive enzymes and to absorption. Both sago RS and HCl-sago RS were resistant to 180 min hydrolysis by gastric acidity at pH 1 to 4 with less than 0.85% hydrolyzed. Both samples were also resistant toward hydrolysis by gastrointestinal tract enzymes and intestinal absorption with 96.75% and 98.69% of RS3 were recovered respectively after 3.5 h digestion and overnight dialysis at 37 °C. Sago RS3 supported the growth of both beneficial (lactobacilli and Bifidobacteria) and pathogenic microbes (Escherichia coli, Campylobacter coli, and Clostridium perfringens) in the range of 2.60 to 3.91 log10 CFU/mL. Hence, prebiotic activity score was applied to describe the extent to which sago RS3 supports selective growth of the lactobacilli and bifidobacteria strains over pathogenic bacteria. The highest scores were obtained from Bifidobacterium sp. FTDC8943 grown on sago RS (+0.26) and HCl-sago RS (+0.24) followed by L. bulgaricus FTDC1511 grown on sago RS (+0.21). The findings had suggested that sago RS3 has the prebiotic partial characteristics and it is suggested to further assess the suitability of sago RS3 as a prebiotic material.
    Matched MeSH terms: Starch/chemistry*
  16. The effect of fermentation and addition of vegetable oil on resistant starch formation in wholegrain breads
    Buddrick O, Jones OAH, Hughes JG, Kong I, Small DM
    Food Chem, 2015 Aug 01;180:181-185.
    PMID: 25766816 DOI: 10.1016/j.foodchem.2015.02.044
    Resistant starch has potential health benefits but the factors affecting its formation in bread and baked products are not well studied. Here, the formation of resistant starch in wholemeal bread products was evaluated in relation to the processing conditions including fermentation time, temperature and the inclusion of palm oil as a vitamin source. The effects of each the factor were assessed using a full factorial design. The impact on final starch content of traditional sourdough fermentation of wholemeal rye bread, as well as the bulk fermentation process of wheat and wheat/oat blends of wholemeal bread, was also assessed by enzyme assay. Palm oil content was found to have a significant effect on the formation of resistant starch in all of the breads while fermentation time and temperature had no significant impact. Sourdough fermentation of rye bread was found to have a greater impact on resistant starch formation than bulk fermentation of wheat and wheat blend breads, most likely due the increased organic acid content of the sourdough process.
    Matched MeSH terms: Starch/metabolism
  17. Development and characterization of sugar palm starch and poly(lactic acid) bilayer films
    Sanyang ML, Sapuan SM, Jawaid M, Ishak MR, Sahari J
    Carbohydr Polym, 2016 08 01;146:36-45.
    PMID: 27112848 DOI: 10.1016/j.carbpol.2016.03.051
    The development and characterization of environmentally friendly bilayer films from sugar palm starch (SPS) and poly(lactic acid) (PLA) were conducted in this study. The SPS-PLA bilayer films and their individual components were characterized for their physical, mechanical, thermal and water barrier properties. Addition of 50% PLA layer onto 50% SPS layer (SPS50-PLA50) increased the tensile strength of neat SPS film from 7.74 to 13.65MPa but reduced their elongation at break from 46.66 to 15.53%. The incorporation of PLA layer significantly reduced the water vapor permeability as well as the water uptake and solubility of bilayer films which was attributed to the hydrophobic characteristic of the PLA layer. Furthermore, scanning electron microscopy (SEM) image of SPS50-PLA50 revealed lack of strong interfacial adhesion between the SPS and PLA. Overall, the incorporation of PLA layer onto SPS films enhances the suitability of SPS based films for food packaging.
    Matched MeSH terms: Starch/chemistry*
  18. Dielectric and material analysis on physicochemical activity of porous hydroxyapatite/cornstarch composites
    Beh CY, Cheng EM, Mohd Nasir NF, Eng SK, Abdul Majid MS, Ridzuan MJM, et al.
    Int J Biol Macromol, 2021 Jan 01;166:1543-1553.
    PMID: 33181217 DOI: 10.1016/j.ijbiomac.2020.11.034
    This paper provides a comprehensive analysis of the dielectric and physicochemical properties of the porous hydroxyapatite/cornstarch (HAp/Cs) composites in a new perspective. The porous composites have been characterized via SEM, FTIR, XRD and dielectric spectroscopy. The dielectric permittivity spectra were obtained in Ku-band (12.4-18.0 GHz) and it was correlated with the physicochemical properties of the porous HAp/Cs. Porous HAp/Cs composites exhibits low ε' and negative ε″, which influenced by the microstructural morphology, interaction between Hap and Cs, as well as crystalline features due to the various proportion of the HAp/Cs. The physicochemical effect of the composites results in the dielectric polarization and energy loss. This phenomenon indicates the presence of the three obvious relaxation responses in the ε' spectrum (13.2-14.0, 15.2-16.0, and 16.6-17.4 GHz) and the negative behaviours in the ε″ spectrum. The relationships between physicochemical and dielectric properties of the porous composite facilitate the development of the non-destructive microwave evaluation test for the porous composite.
    Matched MeSH terms: Starch/analogs & derivatives*
  19. Effect of plasticizers on physical, thermal, and tensile properties of thermoplastic films based on Dioscorea hispida starch
    Hazrati KZ, Sapuan SM, Zuhri MYM, Jumaidin R
    Int J Biol Macromol, 2021 Aug 31;185:219-228.
    PMID: 34153358 DOI: 10.1016/j.ijbiomac.2021.06.099
    This study examines the effects of varying the concentrations of sorbitol (S) and glycerol (G) on the physical, morphological, thermal, and mechanical properties of Dioscorea hispida, starch-based films. In this context, the films of Dioscorea hispida starch were developed using solution casting technique with glycerol (G), sorbitol (S), and a mixture of sorbitol-glycerol (SG) as plasticizers at the ratios of 0, 30, 45, and 60 wt%. The films' moisture contents were increased when increasing the plasticizer contents. The tensile strengths were decreased, but elongations at break were increased; 7.38%-11.54% for G-plasticized films, 10.17%-15.76% for S-plasticized films, and 14.41%- 16.10% for SG-plasticized films with increasing plasticizer concentrations of the film samples. Varying plasticizer concentrations exhibited a minor effect on the S-plasticized film's thermal properties. Significant decrement in the glass transition temperatures of Dioscorea hispida starch films was observed when the plasticizer contents were raised from 30% to 60%. Significantly, the present work has shown that plasticized Dioscorea hispida starch can be considered a promising biopolymer for the applications of biodegradable films.
    Matched MeSH terms: Starch/chemistry*
  20. Effects of limited moisture content and storing temperature on retrogradation of rice starch
    Ding L, Zhang B, Tan CP, Fu X, Huang Q
    Int J Biol Macromol, 2019 Sep 15;137:1068-1075.
    PMID: 31260761 DOI: 10.1016/j.ijbiomac.2019.06.226
    The objective of this study is to investigate the effects of limited moisture content and storing temperature on the retrogradation of rice starch. Starch was gelatinized in various moisture contents (30-42%) and rice paste was stored at different temperatures (4 °C, 15 °C, 30 °C, -18/30 °C and 4/30 °C). X-ray diffraction (XRD) analysis revealed that after retrogradation, the crystalline type of rice starch changed from A-type to B + V type. The B-type crystallinity of retrograded rice starch under 30 °C was the highest among the five temperature conditions, and an increase in B-type crystallinity with increasing moisture content was observed. Differential scanning calorimetry (DSC) results revealed that rice starch retrogradation consists of recrystallization of amylopectin and amylose, and is mainly attributed to amylopectin. The higher moisture content was favorable for amylopectin recrystallization, whereas the moisture content had little effect on the amylose recrystallization. The optimal temperature for amylopectin and amylose recrystallization was 4 °C and 15 °C, respectively. The amylopectin recrystallization enthalpy of rice starch stored at 4/30 °C was mediated between 4 °C and 30 °C but always higher than that at -18/30 °C. On the whole, after being heated at 42% moisture content and stored at 4 °C, rice starch showed the maximum total retrogradation enthalpy (8.44 J/g).
    Matched MeSH terms: Starch/chemistry*
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links