Displaying publications 1 - 20 of 25 in total

Abstract:
Sort:
  1. Ahmad, S.F.
    Ann Dent, 2006;13(1):24-33.
    MyJurnal
    To date there is no standard protocol on evaluation of the masticatory performance in complete denture wearer even though many methods had been described in the literature for measurement of the masticatory performance of the complete denture wearers. The masticatory performances were measured either subjectively or objectively, but no positive correlation was found between subjective and objective measurement. Therefore, there is a need to standardize the objective measurement, as subjective measurements rely on patients’ perceptions, which is not reliable. Intra individual and inter individual variations that exist support the need to standardize the method of measurement.
    Matched MeSH terms: Denture, Complete
  2. Giok KC, Veettil SK, Menon RK
    Clin Oral Investig, 2024 Jan 06;28(1):78.
    PMID: 38183500 DOI: 10.1007/s00784-023-05467-4
    OBJECTIVES: The purpose of this systematic review with network meta-analysis was to assess the comparative efficacy of various types of denture adhesives in complete denture patients.

    MATERIAL AND METHODS: A search was conducted for trials published in Scopus, PubMed, and Cochrane Central Register of Controlled Trials from inception until July 2023 (PROSPERO: CRD42023451045). A network meta-analysis was performed to assess the comparative efficacy of different denture adhesive types and ranked using the Surface Under the Cumulative Ranking (SUCRA) system. The Grading of Recommendations, Assessment, Development, and Evaluations (GRADE) approach was used to assess the level of certainty of evidence.

    RESULTS: Seventeen articles were included in the quantitative analysis. Cream denture adhesives significantly increased bite force in both incisal region (RR = 7.63[95%CI: 3.34, 11.91]) (P 

    Matched MeSH terms: Denture, Complete*
  3. Mahmood WA, Watson CJ, Ogden AR, Hawkins RV
    Int J Prosthodont, 1992 Jul-Aug;5(4):359-66.
    PMID: 1520458
    Image analysis was used to determine masticatory efficiency and performance before and after placement of immediate dentures. Sections of cored carrot were used as the test food and the particle size of chewed expectorated food was measured using image analysis. Measurements were shown to be accurate and reproducible. Masticatory function of immediate-denture patients was also compared with a similar number of dentate individuals and experienced complete-denture wearers. Dentate subjects were significantly (P less than .01) more efficient at masticating the test food than were the complete- or immediate-denture wearers. The new method of measurement removes the necessity for the unpleasant and unhygienic sieving process previously used in this type of study.
    Matched MeSH terms: Denture, Complete, Immediate*
  4. Haider KG, Lewis GR
    Quintessence Int, 1994 Jan;25(1):23-6.
    PMID: 8190877
    A variety of problems faces the prosthodontist attempting reconstruction of maxillary defects. There are various treatment options for patients requiring a partial maxillectomy and an obturator prosthesis. Reduced adaptability makes it difficult for the patient to learn to use a new appliance, unless existing skills can be employed. It is therefore helpful to reproduce familiar features of a patient's existing obturator, especially if this has been used successfully over a transition period.
    Matched MeSH terms: Denture, Complete, Upper*
  5. Ling BC
    Quintessence Int, 2004 Apr;35(4):294-8.
    PMID: 15119715
    This article describes a technique of constructing a set of maxillary and mandibular complete dentures in three visits instead of the usual five clinical appointments. This system of complete-denture construction is made possible because of the combined use of visible light-cured material as an impression tray and record base material, as well as the use of new biometric wax occlusion rims. Unlike some earlier techniques that use light-cured resin composites as the denture base materials, this method retains the use of heat-cured polymethylmethacrylate as the denture base material.
    Matched MeSH terms: Denture, Complete*; Denture, Complete, Lower; Denture, Complete, Upper
  6. Ann LK
    Dent J Malaysia Singapore, 1968 Feb;8(1):29-32.
    PMID: 4882517
    Matched MeSH terms: Denture, Complete, Upper
  7. Ahmad, F., Yunus, N., Mc Cord, F.
    Ann Dent, 2008;15(2):94-99.
    MyJurnal
    This article reviews the concept of Combination Syndrome and presents a clinical case of a patient with a modern variation to this clinical scenario': The clinical procedures involved in the provision of a maxillary complete denture against a mandibular implant-supported complete fixed prosthesis is described with some suggestions on how to optimise the treatment outcome for the patient.
    Matched MeSH terms: Denture, Complete
  8. Patil PG, Nimbalkar-Patil S
    J Indian Prosthodont Soc, 2015 Oct-Dec;15(4):337-41.
    PMID: 26929537 DOI: 10.4103/0972-4052.161568
    INTRODUCTION: The maxillomandibular relationship (MMR) record is a critical step to establish the new occlusion in implant supported complete mouth rehabilitation. Using patients existing denture for recording the MMR requires implant definitive cast to be modified extensively to completely seat the denture (with unaltered flanges) on it. This may influence the correct seating of the denture on the implant definitive cast causing faulty recording of the MMR.
    MATERIALS AND METHOD: Elastomeric record bases, reinforced with the resin framework, are fabricated and relined with the light body elastomeric material when all the healing abutments are in place. The MMR is recorded with these elastomeric record bases using vacuum formed facial surface index of the occluded existing dentures as a guideline.
    RESULTS: The elastomeric record bases with facial surface index of the existing dentures can allow clinicians to record MMR records without removing the healing abutments from the mouth with acceptable accuracy. This can save chair-side time of the procedure. The record of facial surfaces of existing complete denture in the form of vacuum formed sheet helps to set the occlusal vertical dimension.
    CONCLUSION: Use of facial surface index together with the elastomeric record bases can be the useful alternative technique to record the MMR in patients with implant supported full mouth rehabilitation. Further study is required to prove its routine clinical utility.
    KEYWORDS: Implant restorations; maxillomandibular relation; occlusion rim; record base
    Matched MeSH terms: Denture, Complete
  9. Vaithilingam, R.D., Mahmood, R.
    Ann Dent, 2009;16(1):37-42.
    MyJurnal
    The presence of macroglossia, a tendency towards poor cooperation and the inability to adapt to compl~te dental prostheses due to motor and mental deficiencies makes the oral rehabilitation of Down Syndrome patients difficult. This article reports on the use of mini implant supported overdenture to rehabilitate a Down Syndrome patient who had difficulty adapting to his new mandibular complete denture. The patient's ability to cooperate during treatment as well as the maintenance of an optimal oral hygiene practice enabled mini-implants to be inserted and maintained 20 months post insertion as evidenced by clinical and radiological findings. To the author's knowledge, this is the first reporting of a successful mini implant supported overdenture in a Down Syndrome patient.
    Matched MeSH terms: Denture, Complete
  10. Rajeshwari K, Kohli S, Mathew XK
    J Clin Diagn Res, 2017 Apr;11(4):ZC61-ZC63.
    PMID: 28571264 DOI: 10.7860/JCDR/2017/23709.9683
    INTRODUCTION: Presence of abnormal resting tongue position can lead to poor denture retention and stability. The prevalence of retracted tongue position has been found to be higher in partially edentulous subjects compared to dentate subjects and is greatest in completely edentulous individuals.

    AIM: To evaluate resting tongue position in recently extracted and long term completely edentulous patients, and to evaluate the efficacy of achieving retracted tongue position by simple modification in complete denture along with certain tongue exercises.

    MATERIALS AND METHODS: A total of 62 study subjects were classified into two groups based on duration of edentulousness. Group A: Recently extracted completely edentulous subjects (<1 year), Group B: Long term completely edentulous subjects (>1-10 year). The patients with retracted tongue position were subjected to a simple modification in complete denture along with inclusion of certain tongue exercises. After eight months patients were recalled and evaluated. The data was analysed using SPSS statistical tests like mean, standard deviation, proportion, Chi square test and McNemar Test.

    RESULTS: Among the study subjects, 54.9% had retracted tongue position. Group B showed high proportion of retracted tongue position (68.8%) as compared to Group A. After the intervention, 42.8% study subjects gained normal resting tongue position.

    CONCLUSION: Long term completely edentulous subjects presented retracted tongue position in higher percentage when compared to the recently extracted group. The interventional method employed for the subjects with retracted tongue position, played a significant role to assume normal resting tongue position and showed improvement in denture stability and retention.

    Matched MeSH terms: Denture, Complete
  11. Khuder T, Yunus N, Sulaiman E, Ibrahim N, Khalid T, Masood M
    J Oral Rehabil, 2017 May;44(5):398-404.
    PMID: 28295492 DOI: 10.1111/joor.12504
    This study aimed to investigate residual ridge resorption (RRR) of anterior and posterior maxillary and mandibular edentulous ridges, in patients treated with mandibular implant overdentures (IOD) and compare with conventional complete denture (CD) wearers, and to determine at each location, the association of RRR with the occlusal forces distribution and other patients' variables. The anterior and posterior RRR of IOD (six males, 17 females) and CD (12 males, 11 females) groups were determined using baseline and follow-up dental panaromic radiographs (DPT) (mean intervals 4 ± 1·8 years). The bone ratios were calculated using proportional area: anatomic to fixed reference areas and mean difference of ratios between the intervals determined RRR. The ridge locations included anterior and posterior maxillary and posterior mandibular arches. The T-Scan III digital occlusal system was used to record anterior and posterior percentage occlusal force (%OF) distributions. There were significant differences in anterior and posterior %OF between treatment groups. Two-way anova showed RRR was significant for arch locations (P = 0·005), treatment group (IOD versus CD) (P = 0·001), however, no significant interaction (P = 0·799). Multivariate regression analyses showed significant association between RRR and %OF at anterior maxilla (P = 0·000) and posterior mandible (P = 0·023) and for treatment groups at posterior maxilla (P = 0·033) and mandibular areas (P = 0·021). Resorption was observed in IOD compared to CD groups, with 8·5% chance of less resorption in former and 7·8% in the latter location. Depending on arch location, ridge resorption at various locations was associated with occlusal force distribution and/or treatment groups (implant prostheses or conventional complete dentures).
    Matched MeSH terms: Denture, Complete, Lower*; Denture, Complete, Upper*
  12. Siar CH, Ng KH, Ngui CH
    Ann Dent, 1992;51(1):27-8.
    PMID: 1632623
    A case of denture hyperplasia of the upper labial sulcus with concomitant oncocytic metaplastic changes is described. The patient concerned is an elderly male wearing an ill-fitting upper full denture.
    Matched MeSH terms: Denture, Complete, Upper/adverse effects*
  13. Alsrouji MS, Ahmad R, Abdul Razak NH, Shuib S, Kuntjoro W, Baba NZ
    J Prosthodont, 2019 Feb;28(2):e764-e770.
    PMID: 30044033 DOI: 10.1111/jopr.12954
    PURPOSE: To relate the principal stress, strain, and total deformation in the premaxilla region beneath a complete denture to the pattern of premaxilla bone resorption when opposed by a conventional complete denture (CD) or by a two-implant-retained overdenture (IOD) using finite element analysis (FEA).

    MATERIALS AND METHODS: Three-dimensional solid models of the maxilla, mucosa, and denture of a selected edentulous patient were created using Mimics and CATIA software. The FEA model was created and duplicated in ANSYS 16.0 to perform two simulations for the IOD and the CD models. The values of maximum stress and strain and total deformation were obtained and compared to the outcomes of premaxilla resorption from a parallel clinical study.

    RESULTS: The maximum principal stress in the premaxilla in the IOD model ranged from 0.019 to 0.336 MPa, while it ranged from 0.011 to 0.193 MPa in the CD model. The maximum principal strain in the IOD model was 1.75 times greater than that in the CD model. Total deformation was 1.8 times higher in the IOD model. Greater bone resorption was observed in regions of higher stress, which were on the occlusal and buccal sides of the premaxilla residual ridge.

    CONCLUSION: Stress, strain, and total deformation values present in the premaxilla area beneath a CD were approximately two times greater in a comparison between an opposing mandibular two-IOD and an opposing mandibular CD. The results were consistent with a parallel clinical study in which the rate of premaxilla bone resorption was almost three times greater in the IOD group.

    Matched MeSH terms: Denture, Complete/adverse effects*
  14. Baig MR, Rajan G, Yunus N
    Gerodontology, 2012 Jun;29(2):e1140-5.
    PMID: 21615782 DOI: 10.1111/j.1741-2358.2010.00433.x
    Dental rehabilitation of a completely edentulous geriatric patient has always been a challenge to the clinician, especially in treating those with higher expectations and demands. Treatment duration and the amount of residual alveolar bone available are often important considerations when planning for dental implant-based fixed treatment for these patients. With the introduction of zygomatic implants, a graftless alternative solution has emerged for deficient maxillary bone with provision for immediate loading. This article describes the treatment of a completely edentulous elderly patient using zygomatic implants in conjunction with conventional implants. The implants were immediately loaded using a definitive acrylic resin fixed denture reinforced with a cast metal framework, to provide function and aesthetics.
    Matched MeSH terms: Denture, Complete, Lower; Denture, Complete, Upper*
  15. Baig MR, Rajan G
    J Oral Implantol, 2010;36(3):219-23.
    PMID: 20553176 DOI: 10.1563/AAID-JOI-D-09-00048
    Abstract This article describes the clinical and laboratory procedures involved in the fabrication of laboratory-processed, provisional, screw-retained, implant-supported maxillary and mandibular fixed complete dentures incorporating a cast metal reinforcement for immediate loading of implants. Precise fit is achieved by intraoral luting of the cast frame to milled abutments. Effective splinting of all implants is attained by the metal substructure and retrievability is provided by the screw-retention of the prosthesis.
    Matched MeSH terms: Denture, Complete, Immediate*; Denture, Complete, Lower; Denture, Complete, Upper
  16. Mayya A, Eachempati P, Nagraj SK, Kumar K
    BMJ Case Rep, 2020 Jun 09;13(6).
    PMID: 32522723 DOI: 10.1136/bcr-2020-234297
    Matched MeSH terms: Denture, Complete
  17. Seman, K., Abdul Manaf, H., Ismail, A.R.
    MyJurnal
    This study was to investigate the association between functional dentition with inadequate calorie intake and underweight in elderly people living in “Pondok” in Kelantan. A cross-sectional study participated by 369 elderly people was carried out. A simple random sampling method was utilized for the selection of the subjects. Subjects were interviewed using a structured form to collect information about subjects’ demographic background and self-reported health status. The 24-hour recall method was used to provide information on the subject’s exact food intake during the previous 24 hours. Body mass index was calculated from subjects’ weight and height, followed by oral assessment. The “Nutrical Software” was used for nutrient calculation, followed by SPSS version 11.5 for data analysis. The response rate was 95.6%. Majority of the respondents were female (92.4%). The percentage of subjects who had inadequate calorie intake and underweight was 71.0% and 25.7% respectively. The percentage of edentulism was 81.0%. The proportion of elderly with compromised functional dentition was 48.2% and majority was edentate elderly without wearing any complete dentures or wearing defective dentures, 23.6% and 56.2% respectively, while 20.2% was dentate elderly. The odds of having inadequate calorie intake and getting underweight among elderly with a compromised functional dentition was 3.7 times and 42.0 times respectively, compared to elderly with a non-compromised functional dentition. There was a significant association between inadequate calorie intake and underweight with functional dentition among elderly living in “Pondok” in Kelantan.
    Matched MeSH terms: Denture, Complete
  18. Khalid T, Yunus N, Ibrahim N, Saleh NBM, Goode D, Masood M
    J Prosthet Dent, 2020 Dec;124(6):674-681.
    PMID: 31952858 DOI: 10.1016/j.prosdent.2019.08.005
    STATEMENT OF PROBLEM: Wearers of mandibular complete dentures (CDs) often complain of retention and stability problems resulting in poor masticatory function. Evidence suggests that a mandibular overdenture (MOD) stabilized by 2 implants represents the treatment of choice to improve stability and masticatory function. Measurements are needed of the improvement in masticatory function after providing mandibular implant-stabilized overdentures.

    PURPOSE: The purpose of this prospective clinical study was to evaluate the changes in masticatory function from baseline (T0) to 3 months (T1) and 3 years (T2) in participants with MODs and to assess the effect of baseline mandibular bone height and volume on masticatory function after 3 years.

    MATERIAL AND METHODS: Participants were assessed for masticatory function by using masticatory performance involving paraffin wax cubes as an objective measure and by using masticatory ability involving a questionnaire as a subjective measure. Edentulous individuals presenting for replacement dentures were provided with conventional mucosa-supported prostheses and evaluated for masticatory function after a 3-month settling-in period (baseline measure). Before implant placement, baseline measures of bone height and volume were recorded from cone beam computed tomography (CBCT) images. The prostheses were then converted to implant-stabilized mandibular overdentures while any maxillary prostheses remained supported by the mucosa. Masticatory function was reassessed at 3 months and 3 years after insertion of the mandibular overdentures, and the mean changes from baseline were analyzed with the Wilcoxon signed-rank test. The effect of variables on masticatory function was determined by using multivariate linear regression analyses.

    RESULTS: A total of 23 participants were included in the study, with only 1 participant not completing the 3-year assessment. Significant improvement was observed in the masticatory performance (mixing ability index) (P

    Matched MeSH terms: Denture, Complete, Lower
  19. Alsrouji MS, Ahmad R, Ibrahim N, Kuntjoro W, Al-Harbi FA, Baba NZ
    J Prosthodont, 2019 Apr;28(4):373-378.
    PMID: 30875139 DOI: 10.1111/jopr.13047
    PURPOSE: Blood flow disturbance from functional pressure may lead to ischemia and accumulation of metabolites leading to residual ridge resorption (RRR) underneath complete dentures. The purposes of this study were to determine the effect of mandibular complete denture (CD) and implant-retained overdenture (IRO) on blood flow disturbance in the opposing denture bearing-mucosa of maxillary CD and to compare the blood flow disturbance to RRR of the anterior maxilla.

    MATERIALS AND METHODS: The test group included 9 participants rehabilitated by maxillary CD opposing mandibular IRO, while the control group consisted of 4 participants with CDs. Blood flow was measured by laser Doppler flowmetry (LDF) after denture removal for 0, 30, 60, and 90 minutes. RRR was quantified as reduction in bone volume a year post-treatment. The measurement of blood flow was then compared to the quantification of RRR.

    RESULTS: The mean blood flow measure for the IRO group was significantly lower than CD after immediate denture removal and 30 minutes later. After 60 minutes, the mean difference was not significant between groups, and at 90 minutes, the mean blood flow of both groups equalized to reach a steady state of 377 BPU. The mandibular IRO had reduced the initial blood flow measure in the opposing anterior maxilla mucosa to almost a quarter (103 BPU) of the steady state value (377 BPU) compared to the CD, which reduced it to only about one half (183 BPU), suggesting greater blood flow disturbance in the IRO group. This result is in tandem with the greater reduction of bone volume observed in the IRO group, which was 7.3 ± 1.3% after a year, almost three times higher than CD group at 2.6 ± 1.7%.

    CONCLUSION: IRO may cause significantly higher blood flow disturbance than CD and may have contributed to greater RRR in the anterior maxilla.

    Matched MeSH terms: Denture, Complete, Lower
  20. Ling BC
    PMID: 11709981
    Standard prosthodontic procedures require five visits to construct a set of complete maxillary and mandibular dentures. Various attempts have been made to reduce these procedures to four or three appointments. However, most of these techniques require the use of visible light polymerized resin as the final denture base materials. Visible light-cured resin materials have inferior physical properties and biocompatibility problems as compared with heat cured polymethylmethacrylate. This paper describes a system of complete denture construction which requires three clinical appointments instead of the usual five visits. This system is made possible by using the VLC base/tray material as the preliminary impression material as well as the application of a new biometric wax occlusion rim. It retains the use of polymethylmethacrylate as the denture base material. This system also utilizes all the procedures used in the conventional five appointment system of complete denture construction.
    Matched MeSH terms: Denture, Complete*
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links