Displaying all 13 publications

Abstract:
Sort:
  1. Dielectric Spectroscopy of Palm Olein During Batch Deep Frying and Their Relation with Degradation Parameters
    Ibrahim NUA, Abd Aziz S, Hashim N, Jamaludin D, Khaled AY
    J Food Sci, 2019 Apr;84(4):792-797.
    PMID: 30861127 DOI: 10.1111/1750-3841.14436
    Total polar compounds (TPC) and free fatty acids (FFA) are important indicators in evaluating the quality of frying oil. Conventional methods to determine TPC and FFA are often time consuming, involved laboratory analyses which required skilled personnel and used substantial amount of harmful solvent. In this study, dielectric spectroscopy technique was used to investigate the relation between dielectric property of refined, bleached and deodorized palm olein (RBDPO) during deep frying with TPC and FFA. In total, 150 batches of French fries were intermittently fried at 185 ± 5 °C for 7 hr a day over 5 consecutive days. A total of 30 frying oil samples were collected. The dielectric property of frying oil samples were measured using impedance analyzer with frequencies ranging from 100 Hz to 10 MHz. The TPC of frying oil samples were measured with a Testo 270, while the FFA analysis was done using Malaysian Palm Oil Board (MPOB) test method. Results showed that dielectric constant, TPC and FFA of RBDPO increased as the frying time increased. Dielectric constant increased from 3.09 to 3.17, while TPC and FFA increased from 9.96 to 19.52 and from 0.08% to 0.36%, respectively. Partial least square (PLS) analysis produced good prediction of TPC and FFA with the application of genetic algorithm (GA). Model developed for prediction of TPC and FFA yielded highly significant correlation with R2 of 0.91 and 0.95, respectively and both had root mean square error in cross-validation (RMSECV) of 1.06%. This study demonstrates the potential of dielectric spectroscopy in monitoring palm olein degradation during frying. PRACTICAL APPLICATION: The application of dielectric spectroscopy to detect degradation of palm olein during frying was studied. The dielectric property of palm olein during frying has successfully correlated with TPC and FFA. The model developed in this study could be used for the development of a sensing system for palm olein degradation monitoring.
    Matched MeSH terms: Fatty Acids, Nonesterified/analysis
  2. Quality assessment of palm products upon prolonged heat treatment
    Tarmizi AH, Lin SW
    J Oleo Sci, 2008;57(12):639-48.
    PMID: 19001776
    Extending the frying-life of oils is of commercial and economic importance. Due to this fact, assessment on the thermal stability of frying oils could provide considerable savings to the food processors. In this study, the physico-chemical properties of five palm products mainly palm oil, single-fractionated palm olein, double-fractionated palm olein, red palm olein and palm-based shortening during 80 hours of heating at 180 degrees C were investigated. Heating properties of these products were then compared with that of high oleic sunflower oil, which was used as reference oil. The indices applied in evaluating the quality changes of oils were free fatty acid, smoke point, p-anisidine value, tocols, polar and polymer compounds. Three palm products i.e. palm oil, single-fractionated palm olein and double-fractionated palm olein were identified to be the most stable in terms of lower formation of free fatty acid, polar and polymer compounds as well as preserving higher smoke point and tocols content compared to the other three oils. The low intensity of hydrolytic and oxidative changes due to prolonged heating, suggests that these palm products are inherently suitable for frying purposes.
    Matched MeSH terms: Fatty Acids, Nonesterified/analysis
  3. Simultaneous quantification of free fatty acids, free sterols, squalene, and acylglycerol molecular species in palm oil by high-temperature gas chromatography--flame ionization detection
    Lau HL, Puah CW, Choo YM, Ma AN, Chuah CH
    Lipids, 2005 May;40(5):523-8.
    PMID: 16094863
    This paper discusses a rapid GC-FID technique for the simultaneous quantitative analysis of FFA, MAG, DAG, TAG, sterols, and squalene in vegetable oils, with special reference to palm oil. The FFA content determined had a lower SE compared with a conventional titrimetric method. Squalene and individual sterols, consisting of beta-sitosterol, stigmasterol, campesterol, and cholesterol, were accurately quantified without any losses. This was achieved through elimination of tedious conventional sample pretreatments, such as saponification and preparative TLC. With this technique, the separation of individual MAG, consisting of 16:0, 18:0, and 18:1 FA, and the DAG species, consisting of the 1,2(2,3)- and 1,3-positions, was sufficient to enable their quantification. This technique enabled the TAG to be determined according to their carbon numbers in the range of C44 to C56. Comparisons were made with conventional methods, and the results were in good agreement with those reported in the literature.
    Matched MeSH terms: Fatty Acids, Nonesterified/analysis*
  4. Fulltext Palm oil and palm olein frying applications
    Ismail R
    Asia Pac J Clin Nutr, 2005;14(4):414-9.
    PMID: 16326649
    Several million tones of palm oil and palm olein are used annually in the world for frying. This paper will discuss their frying performances in three major applications - industrial production of potato chips/crisps, industrial production of pre-fried frozen French fries and in fast food outlets. In the first study, about four tones of potato chips were continuously fried 8 hours a day and five days a week. The palm olein used (with proper management) performed well and was still in excellent condition and usable at the end of the trial. This was reflected in its low free fatty acid (FFA) content of around 0.23%, peroxide value of 4 meq/kg, anisidine value of 16, low polar and polymer contents of 10% and 2%, respectively, induction period (OSI) of 21 hours and high content of tocopehrols and tocotrienols of 530 ppm even after >1900 hours. In the second study in which an average 12 tones pre-fried frozen French fries were continuously fried a day for 5 days a week, palm oil performed excellently as reflected by its low FFA of 0.34%, food oil sensor reading of 1.1, low polar and polymer contents of 17% and 2.8%, respectively, over the 12 days of trial. In the third study in which palm shortening, palm oil and palm olein were simultaneously used to intermittently fry chicken parts in the laboratory simulating the conditions in fast food outlets, the three frying oils also performed very satisfactorily as reflected by their reasonably low FFA of <1%, smoke points of >180 degrees C, and polar and polymer contents of <25% and <6%, respectively, after 5 days of consecutive frying. All the quality indicators did not exceed the maximum discard points for frying oils/fats in the three applications, while the fried food product was well accepted by the in-house train sensory panel using a-nine point hedonic score.
    Matched MeSH terms: Fatty Acids, Nonesterified/analysis
  5. Fulltext Study on the spectrophotometric detection of free fatty acids in palm oil utilizing enzymatic reactions
    Azeman NH, Yusof NA, Abdullah J, Yunus R, Hamidon MN, Hajian R
    Molecules, 2015;20(7):12328-40.
    PMID: 26198220 DOI: 10.3390/molecules200712328
    In this paper, a comprehensive study has been made on the detection of free fatty acids (FFAs) in palm oil via an optical technique based on enzymatic aminolysis reactions. FFAs in crude palm oil (CPO) were converted into fatty hydroxamic acids (FHAs) in a biphasic lipid/aqueous medium in the presence of immobilized lipase. The colored compound formed after complexation between FHA and vanadium (V) ion solution was proportional to the FFA content in the CPO samples and was analyzed using a spectrophotometric method. In order to develop a rapid detection system, the parameters involved in the aminolysis process were studied. The utilization of immobilized lipase as catalyst during the aminolysis process offers simplicity in the product isolation and the possibility of conducting the process under extreme reaction conditions. A good agreement was found between the developed method using immobilized Thermomyces lanuginose lipase as catalyst for the aminolysis process and the Malaysian Palm Oil Board (MPOB) standard titration method (R2 = 0.9453).
    Matched MeSH terms: Fatty Acids, Nonesterified/analysis*
  6. Other factors to consider in the formation of chloropropandiol fatty esters in oil processes
    Ramli MR, Siew WL, Ibrahim NA, Kuntom A, Abd Razak RA
    Food Addit Contam Part A Chem Anal Control Expo Risk Assess, 2015;32(6):817-24.
    PMID: 25798697 DOI: 10.1080/19440049.2015.1032368
    This paper examines the processing steps of extracting palm oil from fresh fruit bunches in a way that may impact on the formation of chloropropandiol fatty esters (3-MCPD esters), particularly during refining. Diacylglycerols (DAGs) do not appear to be a critical factor when crude palm oils are extracted from various qualities of fruit bunches. Highly hydrolysed oils, in spite of the high free fatty acid (FFA) contents, did not show exceptionally high DAGs, and the oils did not display a higher formation of 3-MCPD esters upon heat treatment. However, acidity measured in terms of pH appears to have a strong impact on 3-MCPD ester formation in the crude oil when heated at high temperatures. The differences in the extraction process of crude palm oil from current commercial processes and that from a modified experimental process showed clearly the effect of acidity of the oil on the formation of 3-MCPD esters. This paper concludes that the washing or dilution step in palm oil mills removes the acidity of the vegetative materials and that a well-optimised dilution/washing step in the extraction process will play an important role in reducing formation of 3-MCPD esters in crude palm oil upon further heat processing.
    Matched MeSH terms: Fatty Acids, Nonesterified/analysis*
  7. Replacement of animal fat with fractionated and partially hydrogenated palm oil in beef burgers
    Babji AS, Alina AR, Seri Chempaka MY, Sharmini T, Basker R, Yap SL
    Int J Food Sci Nutr, 1998 Sep;49(5):327-32.
    PMID: 10367001
    Four formulations of burgers, prepared with 65% lean meat and 15% fat consisting of RBD palm stearin (PS), Socfat 4000P and Socfat 4100P and beef fat (BF) as control were evaluated for solid fat content (SFC), slip melting point (SMP), cooking loss, proximate analysis (moisture, fat and protein), colour, i.e. lightness ('L'), redness ('a') and yellowness ('b'), free fatty acid (FFA), iodine value (IV), thiobarbituric acid (TBA) and texture profile analysis (TPA). Sensory evaluation was carried out for texture, juiciness, aroma, oiliness and overall acceptance. SFC and SMP for raw and cooked SF4000P beef burgers were closest to BF control burgers, falling into the range of 35-40 degrees C. Cooking loss was highest for PS burgers, there were no significant differences (P > 0.05) amongst BF, SF4000P and SF4100P burgers. Proximate analysis on raw burgers showed SF4000P to contain high fat and lowest moisture contents. Objective textural measurements using texture profile analysis (TPA) for all cooked burgers showed no significant differences (P > 0.05) for springiness and cohesiveness. Variation of values among the formulations for hardness, gumminess and chewiness are explained by the differences of SFC for beef burgers with various types of fats. Raw and cooked PS burgers have the lightest 'L' values compared with other fat-substituted burgers while BF, SF4000P and SF4100P indicated no significant differences (P > 0.05) for 'L', 'a' and 'b' values. Beef fat showed the highest amount of free fatty acids (FFA) compared to palm oil samples. For the iodine value (IV), SF4000P showed the highest value which means that it contained the highest level of unsaturated fatty acids followed by PS, BF and SF4100P successively. SF4000P had the highest TBA values followed successively by BF, PS and SF4100P. For sensory evaluation, PS burgers had the least oily taste. This may be due to its high cooking loss. Taste panelists could not differentiate burgers with substituted vegetable fats against the control burgers.
    Matched MeSH terms: Fatty Acids, Nonesterified/analysis
  8. Degumming of crude palm oil by membrane filtration
    Ong KK, Fakhru'l-Razi A, Baharin BS, Hassan MA
    Artif Cells Blood Substit Immobil Biotechnol, 1999 Sep-Nov;27(5-6):381-5.
    PMID: 10595436
    The application of membrane separation in palm oil refining process has potential for energy and cost savings. The conventional refining of crude palm oil results in loss of oil and a contaminated effluent. Degumming of crude palm oil by membrane technology is conducted in this study. The objective of this research is to study the feasibility of membrane filtration for the removal of phospholipids in the degumming of crude palm oil, including analyses of phosphorus content, carotene content free fatty acids (as palmitic acid), colour and volatile matter. A PCI membrane module was used which was equipped with polyethersulfone membranes having a molecular weight cut off of 9,000 (type ES209). In this study, phosphorus content was the most important parameter monitored. The membrane effectively removed phospholipids resulting in a permeate with a phosphorus content of less than 0.3 ppm The percentage removal of phosphorus was 96.4% and was considered as a good removal. Lovibond colour was reduced from 27R 50Y to 20R 30Y. The percentage removal of carotene was 15.8%. The removal of colour was considered good but the removal of carotene was considered insignificant by the membrane. Free fatty acids and volatile matter were not removed. Typical of membrane operations, the permeate flux decreased with time and must be improved in order to be adopted on an industrial scale. Membrane technology was found to have good potential in crude palm oil degumming. However, an appropriate method has to be developed to clean the membranes for reuse.
    Matched MeSH terms: Fatty Acids, Nonesterified/analysis
  9. Fulltext In vitro antioxidant activities of extract and oil from roselle (Hibiscus sabdariffa L.) seed against sunflower oil autoxidation
    Nyam KL, Teh YN, Tan CP, Kamariah L
    Malays J Nutr, 2012 Aug;18(2):265-74.
    PMID: 24575672 MyJurnal
    In order to overcome the stability problems of oils and fats, synthetic antioxidants such as butylated hydroxyanisole (BHA), butylated hydroxytoluene (BHT) and tert-butyl hydroquinone (TBHQ) have widespread use as food additives in many countries. Recent reports reveal that these compounds may be implicated in many health risks, including cancer and carcinogenesis. Hence, there is a move towards the use of natural antioxidants of plant origin to replace these synthetic antioxidants.
    Matched MeSH terms: Fatty Acids, Nonesterified/analysis
  10. Stability evaluation of quality parameters for palm oil products at low temperature storage
    Ramli NAS, Mohd Noor MA, Musa H, Ghazali R
    J Sci Food Agric, 2018 Jul;98(9):3351-3362.
    PMID: 29250790 DOI: 10.1002/jsfa.8839
    BACKGROUND: Palm oil is one of the major oils and fats produced and traded worldwide. The value of palm oil products is mainly influenced by their quality. According to ISO 17025:2005, accredited laboratories require a quality control procedure with respect to monitoring the validity of tests for determination of quality parameters. This includes the regular use of internal quality control using secondary reference materials. Unfortunately, palm oil reference materials are not currently available. To establish internal quality control samples, the stability of quality parameters needs to be evaluated.

    RESULTS: In the present study, the stability of quality parameters for palm oil products was examined over 10 months at low temperature storage (6 ± 2 °C). The palm oil products tested included crude palm oil (CPO); refined, bleached and deodorized (RBD) palm oil (RBDPO); RBD palm olein (RBDPOo); and RBD palm stearin (RBDPS). The quality parameters of the oils [i.e. moisture content, free fatty acid content (FFA), iodine value (IV), fatty acids composition (FAC) and slip melting point (SMP)] were determined prior to and throughout the storage period. The moisture, FFA, IV, FAC and SMP for palm oil products changed significantly (P  0.05). The stability study indicated that the quality of the palm oil products was stable within the specified limits throughout the storage period at low temperature.

    CONCLUSION: The storage conditions preserved the quality of palm oil products throughout the storage period. These findings qualify the use of the palm oil products CPO, RBDPO, RBDPOo and RBDPS as control samples in the validation of test results. © 2017 Society of Chemical Industry.

    Matched MeSH terms: Fatty Acids, Nonesterified/analysis
  11. Problems, control, and treatment of fat, oil, and grease (FOG): a review
    Husain IA, Alkhatib MF, Jammi MS, Mirghani ME, Bin Zainudin Z, Hoda A
    J Oleo Sci, 2014;63(8):747-52.
    PMID: 25007744
    Presence of fat, oil, and grease (FOG) in wastewater is an ever-growing concern to municipalities and solid-waste facility operators. FOG enters the sewer system from restaurants, residences, and industrial food facilities. Its release into the sewer system results in a continuous build-up that causes eventual blockage of sewer pipes. Several researchers have investigated FOG deposition based on the local conditions of sewers and lifestyle. This paper attempts to review the physical and chemical characteristics of FOG, sources of FOG, and potential chemical and biological reactions of FOG. The effect of the aforementioned factors on the FOG-deposition mechanism is also discussed. Moreover, insight into the current control and treatment methods and potential reuse of FOG is highlighted. It is expected that this review would provide scientists and the concerned authorities a holistic view of the recent researches on FOG control, treatment, and reuse.
    Matched MeSH terms: Fatty Acids, Nonesterified/analysis
  12. The oil of Adenanthera pavonina L. seeds and its emulsions
    Zarnowski R, Jaromin A, Certik M, Czabany T, Fontaine J, Jakubik T, et al.
    Z Naturforsch C J Biosci, 2008 11 13;59(5-6):321-6.
    PMID: 18998394
    The oil of Adenanthera pavonina L. seeds was analysed by chromatographic and instrumental means. The oil was found to be rich in neutral lipids (86.2%), and low in polar lipids (13.8%). The neutral lipids consisted mainly of triacylglycerols (64.2%). Unsaturated fatty acids were found as high as 71%, while the percentage of saturated fatty acids was only 29%. GC and GC/MS analyses revealed linoleic, oleic and lignocerotic acid to be predominant among all fatty acids in the A. pavonina oil, whereas stigmasterol was the major steroid identified within this study. Subsequently, the oil was used for preparation of submicron oil-in-water (o/w) lipid emulsions. Lipid emulsions were formulated by using soybean lecithin (SL) to investigate their particle size, Zeta potential and stability at the different oil and SL ratios. The results obtained indicate possible applications of the tested oil in pharmaceutical and medical fields as drug and cosmetic active ingredient carriers.
    Matched MeSH terms: Fatty Acids, Nonesterified/analysis
  13. Fulltext Preliminary Large Scale Mitigation of 3-Monochloropropane-1, 2-diol (3-MCPD) Esters and Glycidyl Esters in Palm Oil
    Ramli MR, Tarmizi AHA, Hammid ANA, Razak RAA, Kuntom A, Lin SW, et al.
    J Oleo Sci, 2020 Aug 06;69(8):815-824.
    PMID: 32641608 DOI: 10.5650/jos.ess20021
    Approximately 900 tonne of crude palm oil (CPO) underwent washing using 5 to 10% hot water (90 to 95°C) at a palm oil mill. The aim of the CPO washing was to eliminate and/or reduce total chlorine content present in the conventional CPO, as it is known as the main precursor for the formation of 3-monochloropropane-1, 2-diol esters (3-MCPDE). By a simple hot water washing, more than 85% of the total chlorine was removed. However, washing did not have significant (p > 0.05) effect on other oil quality parameters such as the deterioration of bleachability index (DOBI), free fatty acid (FFA) content and diacylglycerol (DAG) content of the oil. The latter has been established as the main precursor for glycidyl esters (GE) formation. The treated CPO was then transported using tankers and further refined at a commercial refinery. Refining of washed CPO resulted in significantly (p < 0.05) lower formation of 3-MCPDE, but GE content remained slightly high. Post-treatment of refined oil significantly reduced the GE content (p < 0.05) to an acceptable level whilst almost maintaining the low 3-MCPDE level. The study has proven that water washing of CPO prior to refining and subsequent post-refining is so far the most effective way to produce good quality refined oil with considerably low 3-MCPDE and GE contents. Dry fractionation of refined palm oil showed these contaminants partitioned more into the liquid olein fraction compared to the stearin fraction.
    Matched MeSH terms: Fatty Acids, Nonesterified/analysis
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links