Ground water contain natural radioactivity associated with uranium and thorium that present naturally in rocks and soils. Humans may be exposed to the emission of energetic alpha particle from supported radon decaying process in this water when it is inhaled or ingested. Assessment of supported radon in ground water was carried out using fourteen ground water samples from Cameron Highlands. The measurement was accomplished by degassing the water samples using pump and then allowing the gas to flow into specially constructed 0.0191 m8 metal chamber. The activity concentration of supported radon in water sample was measured using continuous radon monitor inside the radon chamber. Measurement was carried out at one hour interval for twenty four hours. The hourly supported radon concentration was found to stabilize after about 8 hours. The stabilized concentration was used to determine supported radon activity concentration in the water samples. Results of the study show that depending on the sampling location, the activity concentrations of supported radon are in the range from 0.09 - 0.48 Bq/L which is lower than the activity concentration of radon in drinking water as proposed by USEPA (11 Bq/L).
MeSH terms: Alpha Particles; Humans; Radioactivity; Radon; Soil; Thorium; United States; United States Environmental Protection Agency; Uranium; Water Pollutants, Radioactive; Groundwater; Drinking Water
160-162 Dy
nuclei are the best candidates to study collective properties of low-lying states since these
nuclei are quite well studied experimentally. Phenomenological model is used to evaluate the positive-parity states energy spectra and the structure of these nuclei by taking into account the Coriolis mixing between states. Deviations from the adiabatic conditions are found to be occurred.
Effect of AP+, Ca", Cu" and Fe" on the removal of radium-226 from radium-contaminated soil using humic acid extracted from a Malaysian peat soil was investigated using batch washing method. The concentration of Al,+ Ca", Cu" and Fe" ranged from 0 to 100 ppm. The radioactivity concentration of radium-226 was determined by gamma spectrometer. The removal of radium-226 was enhanced in the presence of AP' with concentration between 20 - 60 ppm. Meanwhile, higher concentration of 80 - 100 ppm did not lead to further increase in the removal of radium-226. The removal of radium-226 was decreased in the presence of Ca" and Cu". In the presence of Fe" with concentration between 20 - 60 ppm, decrease in the removal of radium-226 was also observed. Nevertheless, at concentration between 80 - 100 ppm, the presence of Fe" led to increase in the removal of radium-226.
Among the challenges for superconducting devices to be applied in industry are the need for high transport critical current density (Jr) and sustainability of the device in different environment. For superconducting material to maintain high 4, effective flux pinning centers are needed. The addition of small size MgO particles in bulk Bi2Sr2CaCu2O8 (Bi-2212) superconductor has been proven to enhance the effective flux pinning centers in the superconducting material. Nevertheless, the flux pinning properties of the superconducting materials may change if they are exposed to radioactive environment. Electron irradiation is one of the common techniques that can be used to study the impact of irradiation on superconducting materials. In this work, a small amount of nanosize MgO particles were used as the flux pinning centers for Bi-2212 superconducting material. The Bi-2212/MgO composite was heat treated and followed by partial melting and slow cooling. Some of the samples were subjected to electron irradiation using the facility at the Malaysian Nuclear Agency. Characterizations of non-irradiated and irradiated samples were performed via X-ray Diffraction Patterns (XRD), Scanning Electron Microscopy (SEM) and measurements of J, dependence on temperature in self-field. Higher J, indicates better flux pinning properties in irradiated superconductor composite. This is achieved if defects with larger radius with dimension comparable to the coherence length of the superconducting material were created. On the other hand, decreased in Je indicates ineffective flux pinning and this is attributed to the overlapping of defects that break the superconducting region. Our study showed that electron irradiation deteriorated the flux pinning properties of the Bi-2212/MgO superconductor composite.
The preformation factor of alpha-decay process in compound nuclei is microscopically proposed with a new perspective. The formation of alpha particle inside the parent nuclei is considered as a quantum-mechanical state which is yielded from a certain interaction among the valance nucleons. This interaction is very similar to that one responsible for the formation of the quasi-bound states in many-body system. This introduced microscopic perspective might give more insight to the understanding of the nuclear structure in the compound nuclei.
The preparation, physical and mechanical properties of Al/B4C composites with 5 and 10 wt.% reinforcement content were investigated. In order to obtain the feedstock with a low powder loading, B4C mixtures containing fine powders were investigated to obtain the optimal particle packing. The experimental results indicated that the fine containing 5 and 10 wt.% particles are able to prepare the feedstock with a good flowability. The composites fabricated by powder metallurgy have low densities and homogeneous microstructures. Additionally there is no interface reaction observed between the reinforcement and matrix by XRD analysis. The hardness of Al/B4C composites prepared by powder metallurgy was high.
Nuclear power is considered as one of the best option for future energy development in Malaysia. Since Malaysia has no experience in nuclear energy generation, commissioning the first nuclear power plant needs tremendous effort in various aspects. Site selection is one of important step in nuclear power plant commissioning process. This paper proposes candidate sites for nuclear power plant in Mersing, Kota Tinggi, Muar and Batu Pahat district in Johor, Malaysia. The candidate selection process uses the IAEA document and AELB guideline as main reference, supported by site selection procedure by various countries. MapInfo Professional software was used to simulate the selection process for candidate areas for the nuclear power plant. This paper concluded that Tenggaroh and Jemaluang area are the most suitable area for nuclear power plant facilities in Johor, Malaysia.
L18 orthogonal array in mix level of Taguchi robust design method was carried out to optimize experimental conditions for the preparation of polymer blend composite. Tensile strength and neutron absorption of the composite were the properties of interest. Filler size, filler loading, ball mixing time and dispersion agent concentration were selected as parameters or factors which are expected to affect the composite properties. As a result of Taguchi analysis, filler loading was the most influencing parameter on the tensile strength and neutron absorption. The least influencing was ball-mixing time. The optimal conditions were determined by using mix-level Taguchi robust design method and a polymer composite with tensile strength of 6.33 MPa was successfully prepared. The composite was found to fully absorb thermal neutron flux of 1.04 x 105n/cm2/s with only 2 mm in thickness. In addition, the filler was also characterized by scanning electron microscopy (SEM) and elemental analysis (EDX).
Thermoplastic natural rubber sample is found isotropic based on SAXS pattern. Morphological parameter was obtained based on ideal lamellar morphology using 1-D correlation function. The fitting was carried out using Porod tail model and Vonk for back-extrapolated model. It is found that the long period value is 15.7nm which is comparable to results obtained from Lorents corrected profile, 20nm. Crystalline thickness and amorphous thickness was found as 13.4 and 2.31nm respectively
MeSH terms: Back; Rubber; X-Ray Diffraction; Scattering, Small Angle
Effects of cultural practice under different habitats, of well-managed monoculture plantation and growing wild under rubber trees, were studied in Aquilaria malaccensis (Karas) leaves. This study was carried out on Karas growing in these two habitats each from Lipis, Pahang and Sepang, Selangor areas in Malaysia; under the control and induced treatments. The parameters studied include wet and dry weight of 50 matured leaves, iron and zinc elemental contents in leaf, iron and zinc uptakes from soil, and leaf and soil moisture contents. Iron and zinc were analysed in Karas leaves and soil by using Instrumental Neutron Activation Analysis (INAA) technique.
137 Cs is well known man-made radionuclide produced from nuclear industry. Nuclear weapon tests and nuclear accidents had contributed to presence of 137 Cs into the worldwide environment including Malaysia. It has spread out to the entire world through the air and water current. Since Cameron Highlands is located at high altitude, there is a better chance of the 137 Cs to settle down on the trees and later the soil underneath. In this study, the soil samples were taken at the slopes of two different tea plantation areas namely A and B. The soil samples were oven dried, ground, sieved and packed and sealed properly in plastic containers before measurement. Each plastic container contains around 450 g of sample. The measurement of 137 Cs activity concentration was done using HPGe detector gamma spectrometer. The spectrum was analyzed using Gamma Vision software to calculate the activity concentration of 137 Cs with energy peak of 661.66 keV. The activity concentration of 137 Cs found in the samples ranged from 0.23 to 1.90 and 0.11 to 3.01 Bq/kg for tea plantation A and tea plantation B, respectively. From the activity concentration of 137 Cs result, it was comparable to the others research regarding to 137 Cs in the soil around Asian.
Introduction: Ratings are known to have a generosity error, provide limited discrimination and distorted interpretation, and often fail to document serious deficits. A potential source of these problems is rater judgement. These problems compromise the capability of raters to maintain the standards of rating. The authors propose a simple grading system to improve this situation including providing feedback to raters. Method: The authors developed a grading system named the Discrepancy-Agreement Grade (DAG) to provide feedback on rater judgments. Dependent-t and intraclass correlation tests were applied to determine discrepancy and agreement levels of raters. Rater judgments were then classified into grades A, B, C or D. This grading system was tested in an examination and a student selection interview to assess rating judgments of examiners and interviewers. The purpose was to evaluate the practicability of the grading system to provide feedback on examiners’ and interviewers’ rating judgements. Results: in the examination, five short essays were rated by five pairs of senior lecturers. Out of 5 pairs, 2 (40%) obtained grade A and 3 (60%) obtained grade B. In the student selection interview, a total of 48 pairs of interviewers interviewed ten applicants. Out of 48 pairs, 20 (41.7%) obtained grade A, 1 (2.1%) obtained grade B, 23 (47.9%) obtained grade C and 4 (8.3%) obtained grade D. Conclusion: The grading system showed variability of rater judgments on medical students’ and applicants’ performance in an examination and interview session respectively. It provided feedback on the examiners’ and interviewers’ judgments on candidate performances. This exercise demonstrated practicability of the grading system to provide feedback on rater judgements.
MeSH terms: Educational Measurement; Feedback; Judgment; Names; Reference Standards; School Admission Criteria; Students, Medical
In recent years, the popularity of using complementary and alternative medicine (CAM) as a health care option has increased dramatically all over the world especially in developing countries. As Malaysian statistics showed an increased in chronic diseases among our population, the demand to consume CAM for healing process as well as in pursuit of health and well-being also has increased. Thus it increased patient’s interest to request more information from medical practitioners and nurses who are front health care providers. The objective of this study is to compare the knowledge, attitudes, and practice (KAP) of CAM among final year nursing and medical students in Universiti Sains Malaysia (USM). A cross-sectional comparative study was conducted among final year medical and nursing students using self administered questionnaire. This study utilized the Knowledge-Attitude-Practice (KAP) model to explain how level of knowledge may reflect nursing and medical students’ attitudes and practice of CAMs. There were 74 students participated where 33 of them were nursing students, and 41 were medical students. Independent t-test was used to compare the KAP of CAM between both groups of students and there was a significant different. As a conclusion, this study revealed that nursing students were more knowledgeable about CAM, possessed positive attitudes, and more willing to practice CAM compared to medical students.
MeSH terms: Complementary Therapies; Attitude; Chronic Disease; Cross-Sectional Studies; Delivery of Health Care; Developing Countries; Health Personnel; Humans; Malaysia; Surveys and Questionnaires; Students, Medical; Students, Nursing
Identifying physiotherapy stakeholders for program evaluation. The Health Professional Education plays a pivotal role in providing quality health work force thus improved care in health service to the public in our country. As such all Allied Health Programs conducted by Higher Education Providers (HEP) should keep close surveillance of the quality of Allied Health Programs to mould health professional graduates to deliver quality healthcare service through proper competency measures. Stakeholders have been defined as on-campus and off campus group for the sake of identifying respective views in institutional effectiveness. Allied health programs are emerging enormously in our country and this revolution is creating major crustal deformation, forming folds and faults towards its profession as many educational institutions in the country is with the enterprising objectives of running such programs and not for the benefits of the society.
MeSH terms: Education, Professional; Health Promotion; Quality of Health Care; Running; Societies; Program Evaluation; Physical Therapy Modalities
Introduction: A clear concept and understanding about the measure and the measuring tools is essential for good practice of assessment. Assessors need to have information about the full range of assessment tools inclusive of psychometric validity and purpose of its use. Subjective inferences drawn from the readily available data as numbers of summative scores over the years and statistical evidences of reliability and validity of assessment tools used to measure student’s performance are good sources of feedback for competent assessment program. It also provides meaningful evaluation of learning and teaching in medical education. Method: A retrospective study of 119 candidates was carried out to analyze the summative assessment scores of their certifying examination of Masters of Surgery in School of Medical Sciences (SMS) at Universiti Sains Malaysia. Subjective judgment of raw data followed by internal consistency as reliability, convergent validity and discriminant validity as constructs of individual assessment tool was analyzed. Finally each assessment tool as a measure of written or clinical construct was evaluated against six aspects of Messick’s criteria for quality control. Result: The correlation coefficient for validity and Cronbach’s alpha for reliability was evaluated for clinical measures. However, the test of internal reliability was not possible for essay being the only measure in written construct of summative assessment in surgery. All measures of clinical construct were found highly reliable with Cronbach’s alpha between 0.962-0.979. Long case and the short cases have shown excellent correlations (r=0.959 at p
Introduction: Greater needs of medical doctors to provide appropriate care for both genders related diseases, however men face more problem since their problems have less been recognized. Objective: The objective was to determine the level of men’s health knowledge among final year medical students in USM and MU. Method: A total of 199 final year medical students from Universiti Sains Malaysia (USM), Kelantan, Malaysia and Monash University, Melbourne, Australia (75 students from USM and 124 students from MU) were enrolled in the study and completed self-administered questionnaire on the topics related to male sexual and reproductive health. Result: The response rate for USM and MU was 44% and 68.9% respectively. Out of 52 items, 17 items were significantly had higher percentage in answering correctly (p
MeSH terms: Australia; Humans; Malaysia; Male; Men; Surveys and Questionnaires; Sexual Behavior; Students, Medical; Universities; Men's Health; Reproductive Health
Introduction: Emotional intelligence (EI) is deemed an important aspect of being good medical doctors. Universiti Sains Malaysia (USM) Emotional Quotient Inventory (USMEQ-i) is an EI inventory in Malay language developed primarily as medical student selection tool in USM. Although it was already validated by exploratory factor analysis (EFA), EFA is considered insufficient evidence of construct validity, thus confirmatory factor analysis (CFA) was conducted. Objectives: To determine measurement model validity and construct validity of USMEQ-i among medical degree program applicants in USM by CFA. Methods: USMEQ-i data file for medical degree program applicants in USM for year 2010/2011 and 2011/2012 academic sessions were obtained from Medical Education Department in USM. A random sample of 512 cases was drawn from the data file. Of the sample, only 453 cases were valid study sample after preliminary data screening and assumption checking. CFA was conducted on the sample using maximum likelihood (ML) estimation with bootstrapping technique due to violation of multivariate normality assumption. USMEQ-i measurement model was proposed as a second-order EI factor with seven first-order factors of EI and a Faking Index (FI) factor, with correlation between second-order EI factor and FI factor. Results: The proposed model could not be fit into the study sample data. EI factors and FI factor had to be analyzed separately due to non-positive definite problem. After modifications to the model, CFA of EI factors were suggestive of two-factor model instead of the proposed seven-factor model. Consciousness, Maturity and Control (CoMaCt). CFA of FI factor maintained one-factor model and also valid in term of construct. Conclusion: The modified USMEQ-i, which consisted of separate EI and FI models, was proven to have valid measurement models and reliable constructs. It is considered to be suitable for use among applicants to medical degree program in USM. However, its use as medical student selection tool may require further research, especially how predictive USMEQ-i scores with real performance of medical students, generalizability of the inventory and its stability over time.
MeSH terms: Consciousness; Education, Medical; Factor Analysis, Statistical; Language; Malaysia; Physicians; Research; School Admission Criteria; Students, Medical; Information Storage and Retrieval; Emotional Intelligence
Among most important aspects in conducting a clinical trial are random sampling and allocation of subjects. The processes could be easier if done with familiar software used for data entry and analysis instead of relying on other programs or methods. The objective of this article is to demonstrate random sampling and allocation using SPSS in step-by-step manners using examples most relevant to clinicians as well as researchers in health sciences.
MeSH terms: Habits; Research Personnel; Software; Stereotypic Movement Disorder
The impact of good assessment in medical education depends on how appropriately the tools measure the clinical performance and how reliable, valid and feasible they are to achieve the logical decision. The traditional methods of clinical examination using long and short cases and orals are often argued for its subjectivity, low reliability and inadequate context specificity. Oral test though comparatively more valid due to its face-to-face questions are considered less reliable for problems of unstandardized questions, inconsistent marking and lack of sufficient testing time. Development of an “objective structured clinical examination” (OSCE) was sought as a solution to these problems. But the fragmented representation of the context in a number of stations in OSCE makes it less authentic for an integrated judgment of performance. Yet another method to thought of, was the workplace-based assessment (WPBA) but it takes a snapshot as a predefined attribute of a more complex integrated assessment such as long case. However due to the problem of feasibility it is less likely that high stakes examination as summative assessment will ever be able to attain workplace-based assessment such as Mini-CEX and DOPS. A TOACS (task oriented assessment of clinical skills) format currently used in high stakes fellowship examination in one of the center and claimed to have more active role for examiners was analyzed and compared with OSCE. Author however, did not find a difference except the difference of acronyms of the two formats. Both have multiple, fragmented static or interactive stations of 5-10 minutes duration with or without examiners, patients or exhibits and a marking scheme comprising of checklist or global rating. In the backdrop of this context a new assessment format named the ‘task integrated objective structured clinical examination” or TIOSCE modified from OSCE is currently developed in School of Medical Sciences (SMS) at USM. However, it is a different version of OSCE in which though the principle concept is the same as that of an OSCE, the continuum of clinical skill’s work up of the same patient’s is followed through to test multiple short attributes of clinical competences. As it retains most of the favorable features, TIOSCE also addresses some of the odds features of OSCE.
Background: Summative assessment in postgraduate examination globally employs multiple measures. A standard-setting method decides on pass or fail based on an arbitrarily defined cut-off point on a test score, which is often content expert’s subjective judgment. Contrary to this a standard-setting strategy primarily practices two approaches, a compensatory approach, which decides on overall performance as a sum of all the test scores and a conjunctive approach that requires passing performance for each instrument. However, the challenge using multiple measures is not due to number of measurement tools but due to logic by which the measures are combined to draw inferences on pass or fail in summative assessment. Conjoint University Board of Examination of Masters’ of Otolaryngology and Head-Neck Surgery (ORL-HNS) in Malaysia also uses multiple measures to reach a passing or failing decision in summative assessment. However, the standard setting strategy of assessment is loosely and variably applied to make ultimate decision on pass or fail. To collect the evidences, the summative assessment program of Masters’ of ORL-HNS in School of Medical Sciences at Universiti Sains Malaysia was analyzed for validity to evaluate the appropriateness of decisions in postgraduate medical education in Malaysia. Methodology: A retrospective study was undertaken to evaluate the validity of the conjoint summative assessment results of part II examination of USM candidates during May 2000-May 2011. The Pearson correlation and multiple linear regression tests were used to determine the discriminant and convergent validity of assessment tools. Pearson’s correlation coefficient analyzed the association between assessment tools and the multiple linear regression compared the dominant roles of factor variables in predicting outcomes. Based on outcome of the study, reforms for standard-setting strategy are also recommended towards programming the assessment in a surgical-based discipline. Results: The correlation coefficients of MCQ and essay questions were found not significant (0.16). Long and short cases were shown to have good correlations (0.53). Oral test stood as a component to show fair correlation with written (0.39-0.42) as well as clinical component (0.50-0.66). The predictive values in written tests suggested MCQ predicted by oral (B=0.34, P