Twenty-four Sprague-Dawley male rats (7-9 weeks old, 200-250 g) were divided into Nicotine (N) (0.5 mg/100 g body weight (BW), Nicotine Control (NC) (saline, 0.1 mL/100 g BW), Habbatus sauda oil (HS) (6.0 μ L/100 g BW), and Habbatus sauda Control (HSC) (corn oil, 0.1 mL/100 g BW) groups and treated for 100 days. Sperm parameters and seminiferous tubules measurements were evaluated. The N showed a significantly lower sperm motility (1.03 ± 0.05 × 10(6) sperm/mL) and percentage of normal (82.61 ± 0.03%) and live (93.88 ± 0.01%) sperm, higher value for the seminiferous tubule (253.36 ± 1.83 μ m) and lumen (100.15 ± 2.38 μ m) diameters and spermatogonia (19.85 ± 0.39 μ m) and spermatocytes (33.37 ± 0.59 μ m) layers, and thinner spermatid-sperm layer (22.14 ± 0.71 μ m) than the NC (P < 0.05). The HS had significantly higher sperm motility (1.49 ± 0.04 × 10(6) sperm/mL) and percentage of normal (90.61 ± 0.01%) and live (96.98 ± 0.01%) sperm, smaller lumen diameter (67.53 ± 2.34 μ m) and thinner spermatogonia (17.67 ± 0.32 μ m) and wider spermatid-sperm (36.95 ± 0.79 μ m) layers than the HSC (P < 0.05). This research confirmed that nicotine reduced sperm motility and morphology of normal and live sperms and also affected the testis histology, while Habbatus sauda oil increased sperm quality and gave better testis histological features.
Birth defects or congenital anomalies are one of the major causes of disability in developed and developing countries. Data on birth defects from population-based studies originating from developing countries are lacking. Increasingly, there is a shift to genetic testing and genomics study of birth defects. However, the translation from bench findings to bedside medicine has been muted. There is a need to address this imbalance where congenital anomalies remained the top etiology for neonatal mortality in developing countries. To build capacity in low resource countries, there is a need for accurate collection and ascertainment of birth defects in developing countries. The systematic collection and analysis of data on major birth defects using birth defects registries (BDRs) are an integral part of all clinical genetic services. Healthcare planners in developing countries must be aware of the advantages and limitations of BDRs. Despite the advent of the genomics era, BDRs are essential to the planning and developing care and prevention services at local and national levels, particularly in low resource or developing countries.
This study aims to identify the predictors in the different aspects of the health-related quality of life (HRQoL) and to measure the changes of functional status over time in a cohort of Nigerian stroke survivors. A prospective observational study was conducted in three hospitals of Kano state of Nigeria where stroke survivors receive rehabilitation. The linguistic-validated Hausa versions of the stroke impact scale 3.0, modified Rankin scale, Barthel index and Beck depression inventory scales were used. Paired samples t-test was used to calculate the amount of changes that occur over time and the forward stepwise linear regression model was used to identify the predictors. A total of 233 stroke survivors were surveyed at 6 months, and 93% (217/233) were followed at 1 year after stroke. Functional disabilities were significantly reduced during the recovery phase. Motor impairment, disability, and level of depression were independent predictors of HRQoL in the multivariate regression analysis. The involvement of family members as caregivers is the key factor for those survivors with improved functional status. Thus, to enhance the quality of poststroke life, it is proposed that a holistic stroke rehabilitation service and an active involvement of family members are established at every possible level.
MeSH terms: Adult; Aged; Aged, 80 and over; Demography; Female; Follow-Up Studies; Humans; Male; Middle Aged; Nigeria/epidemiology; Quality of Life*; Survivors/statistics & numerical data*; Recovery of Function; Stroke/epidemiology*; Stroke/physiopathology; Young Adult
The present study was undertaken to determine the content of six minerals, five trace elements, and ten pesticide residues in honeys originating from different regions of Malaysia. Calcium (Ca), magnesium (Mg), iron (Fe), and zinc (Zn) were analyzed by flame atomic absorption spectrometry (FAAS), while sodium (Na) and potassium (K) were analyzed by flame emission spectrometry (FAES). Trace elements such as arsenic (As), lead (Pb), cadmium (Cd), copper (Cu), and cobalt (Co) were analyzed by graphite furnace atomic absorption spectrometry (GFAAS) following the microwave digestion of honey. High mineral contents were observed in the investigated honeys with K, Na, Ca, and Fe being the most abundant elements (mean concentrations of 1349.34, 236.80, 183.67, and 162.31 mg/kg, resp.). The concentrations of the trace elements were within the recommended limits, indicating that the honeys were of good quality. Principal component analysis reveals good discrimination between the different honey samples. The pesticide analysis for the presence of organophosphorus and carbamates was performed by high performance liquid chromatography (HPLC). No pesticide residues were detected in any of the investigated honey samples, indicating that the honeys were pure. Our study reveals that Malaysian honeys are rich sources of minerals with trace elements present within permissible limits and that they are free from pesticide contamination.
MeSH terms: Electric Conductivity; Honey/analysis*; Malaysia; Minerals/analysis*; Pesticides/analysis*; Solubility; Trace Elements/analysis*; Principal Component Analysis; Flowers/chemistry
Khat chewing is associated with unfavourable health outcomes and family dysfunction. Few studies have addressed the factors associated with khat chewing among Yemeni women. However, the family and husband effects on chewing khat by women have not been addressed. This study aimed to determine the prevalence of khat chewing among Yemeni women and its associated factors, particularly husbands and family factors. A cross-sectional study was conducted among 692 adult Yemeni women in the city of Sana'a in Yemen using structured "face to face" interviews. Mean (±SD) age of women was 27.3 years (±6.10). The prevalence of chewing khat by women was 29.6%. Factors associated with chewing khat among women were chewing khat by husbands (OR = 1.8; 95% CI: 1.26, 2.53), being married (OR = 2.0; 95% CI: 1.20, 3.37), frequent family social gatherings (OR = 1.5; 95% CI: 1.06, 2.10), high family income (OR = 1.57; 95% CI: 1.12, 2.21), larger house (OR = 1.63; 95% CI: 1.16, 2.31), and age of women (OR = 0.64; 95% CI: 0.44, 0.92). It is concluded that khat chewing by women in this study was significantly associated with family factors and with khat chewing by their husbands. Urgent action is needed to control khat chewing particularly among women.
The popularity of low cost, lightweight, and environmentally affable masonry unit in building industry carries the need to investigate more flexible and adaptable brick component as well as to retain the requirements confirmed in building standards. In this study, potential use of local materials used as lightweight building materials in solving the economic problems of housing has been investigated. Experimental studies on peat added bricks have been carried out. It demonstrates the physicomechanical properties of bricks and investigates the influence of peat, sand, and cement solid bricks to the role of various types of constructional applications. The achieved compressive strength, spitting strength, flexural strength, unit weight, and ultrasonic pulse velocity are significantly reduced and the water absorption is increased with percentage wise replacement of peat as aggregate in the samples. The maximum 20% of (% mass) peat content meets the requirements of relevant well-known international standards. The experimental values illustrate that, the 44% volumetric replacement with peat did not exhibit any sudden brittle fracture even beyond the ultimate loads and a comparatively smooth surface is found. The application of peat as efficient brick substance shows a potential to be used for wall and a viable solution in the economic buildings design.
MeSH terms: Conservation of Natural Resources; Construction Materials*; Materials Testing; Soil/chemistry*; Compressive Strength
Circularly polarized (CP) dual frequency cross-shaped slotted patch antenna on 1.575 mm thick glass microfiber reinforced polytetrafluoroethylene (PTFE) composite material substrate is designed and fabricated for satellite applications. Asymmetric cross-shaped slots are embedded in the middle of the square patch for CP radiation and four hexagonal slots are etched on the four sides of the square patch for desired dual frequency. Different substrate materials have been analysed to achieve the desired operating band. The experimental results show that the impedance bandwidth is approximately 30 MHz (2.16 GHz to 2.19 GHz) for lower band and 40 MHz (3.29 GHz to 3.33 GHz) for higher band with an average peak gain of 6.59 dBiC and 5.52 dBiC, respectively. Several optimizations are performed to obtain the values of the antenna physical parameters. Moreover, the proposed antenna possesses compactness, light weight, simplicity, low cost, and circularly polarized. It is an attractive candidate for dual band satellite antennas where lower band can be used for uplink and upper band can be used for downlink.
The objective of this study was to investigate the effects of different species of oil palm shell (OPS) coarse aggregates on the properties of high strength lightweight concrete (HSLWC). Original and crushed OPS coarse aggregates of different species and age categories were investigated in this study. The research focused on two OPS species (dura and tenera), in which the coarse aggregates were taken from oil palm trees of the following age categories (3-5, 6-9, and 10-15 years old). The results showed that the workability and dry density of the oil palm shell concrete (OPSC) increase with an increase in age category of OPS species. The compressive strength of specimen CD3 increases significantly compared to specimen CT3 by 21.8%. The maximum achievable 28-day and 90-day compressive strength is 54 and 56 MPa, respectively, which is within the range for 10-15-year-old crushed dura OPS. The water absorption was determined to be within the range for good concrete for the different species of OPSC. In addition, the ultrasonic pulse velocity (UPV) results showed that the OPS HSLWC attain good condition at the age of 3 days.
A new multiobjective dynamic fuzzy genetic algorithm is applied to solve a fuzzy mixed-model assembly line sequencing problem in which the primary goals are to minimize the total make-span and minimize the setup number simultaneously. Trapezoidal fuzzy numbers are implemented for variables such as operation and travelling time in order to generate results with higher accuracy and representative of real-case data. An improved genetic algorithm called fuzzy adaptive genetic algorithm (FAGA) is proposed in order to solve this optimization model. In establishing the FAGA, five dynamic fuzzy parameter controllers are devised in which fuzzy expert experience controller (FEEC) is integrated with automatic learning dynamic fuzzy controller (ALDFC) technique. The enhanced algorithm dynamically adjusts the population size, number of generations, tournament candidate, crossover rate, and mutation rate compared with using fixed control parameters. The main idea is to improve the performance and effectiveness of existing GAs by dynamic adjustment and control of the five parameters. Verification and validation of the dynamic fuzzy GA are carried out by developing test-beds and testing using a multiobjective fuzzy mixed production assembly line sequencing optimization problem. The simulation results highlight that the performance and efficacy of the proposed novel optimization algorithm are more efficient than the performance of the standard genetic algorithm in mixed assembly line sequencing model.
Time series clustering is an important solution to various problems in numerous fields of research, including business, medical science, and finance. However, conventional clustering algorithms are not practical for time series data because they are essentially designed for static data. This impracticality results in poor clustering accuracy in several systems. In this paper, a new hybrid clustering algorithm is proposed based on the similarity in shape of time series data. Time series data are first grouped as subclusters based on similarity in time. The subclusters are then merged using the k-Medoids algorithm based on similarity in shape. This model has two contributions: (1) it is more accurate than other conventional and hybrid approaches and (2) it determines the similarity in shape among time series data with a low complexity. To evaluate the accuracy of the proposed model, the model is tested extensively using syntactic and real-world time series datasets.
Lactococcus lactis is the most studied mesophilic fermentative lactic acid bacterium. It is used extensively in the food industry and plays a pivotal role as a cell factory and also as vaccine delivery platforms. The proteome of the Malaysian isolated L. lactis M4 dairy strain, obtained from the milk of locally bred cows, was studied to elucidate the physiological changes occurring between the growth phases of this bacterium. In this study, ultraperformance liquid chromatography nanoflow electrospray ionization tandem mass spectrometry (UPLC- nano-ESI-MS(E)) approach was used for qualitative proteomic analysis. A total of 100 and 121 proteins were identified from the midexponential and early stationary growth phases, respectively, of the L. lactis strain M4. During the exponential phase, the most important reaction was the generation of sufficient energy, whereas, in the early stationary phase, the metabolic energy pathways decreased and the biosynthesis of proteins became more important. Thus, the metabolism of the cells shifted from energy production in the exponential phase to the synthesis of macromolecules in the stationary phase. The resultant proteomes are essential in providing an improved view of the cellular machinery of L. lactis during the transition of growth phases and hence provide insight into various biotechnological applications.
Due to the budgetary deadlines and time to market constraints, it is essential to prioritize software requirements. The outcome of requirements prioritization is an ordering of requirements which need to be considered first during the software development process. To achieve a high quality software system, both functional and nonfunctional requirements must be taken into consideration during the prioritization process. Although several requirements prioritization methods have been proposed so far, no particular method or approach is presented to consider both functional and nonfunctional requirements during the prioritization stage. In this paper, we propose an approach which aims to integrate the process of prioritizing functional and nonfunctional requirements. The outcome of applying the proposed approach produces two separate prioritized lists of functional and non-functional requirements. The effectiveness of the proposed approach has been evaluated through an empirical experiment aimed at comparing the approach with the two state-of-the-art-based approaches, analytic hierarchy process (AHP) and hybrid assessment method (HAM). Results show that our proposed approach outperforms AHP and HAM in terms of actual time-consumption while preserving the quality of the results obtained by our proposed approach at a high level of agreement in comparison with the results produced by the other two approaches.
This study was conducted to develop a technique for minimally invasive and accurate delivery of stem cells to augment nucleus pulposus (NP) in damaged intervertebral discs (IVD). IVD damage was created in noncontiguous discs at L4-L5 level; rabbits (N = 12) were randomly divided into three groups: group I treated with MSCs in HyStem hydrogel, group II treated with HyStem alone, and group III received no intervention. MSCs and hydrogel were administered to the damaged disc under guidance of fluoroscopy. Augmentation of NP was assessed through histological and MRI T2 mapping of the NP after eight weeks of transplantation. T2 weighted signal intensity was higher in group I than in groups II and III (P < 0.05). Disc height index showed maximum disc height in group I compared to groups II and III. Histological score of the degenerative index was significantly (P < 0.05) lower in group I (8.6 ± 1.8) than that in groups II (11.6 ± 2.3) and III (18.0 ± 5.7). Immunohistochemistry staining for collagen type II and aggrecan staining were higher in group I as compared to other groups. Our results demonstrate that the minimally invasive administration of MSCs in hyaluronan hydrogel (HyStem) augments the repair of NP in damaged IVD.
The use of wireless communication using inductive links to transfer data and power to implantable microsystems to stimulate and monitor nerves and muscles is increasing. This paper deals with the development of the theoretical analysis and optimization of an inductive link based on coupling and on spiral circular coil geometry. The coil dimensions offer 22 mm of mutual distance in air. However, at 6 mm of distance, the coils offer a power transmission efficiency of 80% in the optimum case and 73% in the worst case via low input impedance, whereas, transmission efficiency is 45% and 32%, respectively, via high input impedance. The simulations were performed in air and with two types of simulated human biological tissues such as dry and wet-skin using a depth of 6 mm. The performance results expound that the combined magnitude of the electric field components surrounding the external coil is approximately 98% of that in air, and for an internal coil, it is approximately 50%, respectively. It can be seen that the gain surrounding coils is almost constant and confirms the omnidirectional pattern associated with such loop antennas which reduces the effect of non-alignment between the two coils. The results also show that the specific absorption rate (SAR) and power loss within the tissue are lower than that of the standard level. Thus, the tissue will not be damaged anymore.
Quorum sensing (QS) is a bacterial cell-to-cell communication system controlling QS-mediated genes which is synchronized with the population density. The regulation of specific gene activity is dependent on the signaling molecules produced, namely N-acyl homoserine lactones (AHLs). We report here the identification and characterization of AHLs produced by bacterial strain ND07 isolated from a Malaysian fresh water sample. Molecular identification showed that strain ND07 is clustered closely to Pseudomonas cremoricolorata. Spent culture supernatant extract of P. cremoricolorata strain ND07 activated the AHL biosensor Chromobacterium violaceum CV026. Using high resolution triple quadrupole liquid chromatography-mass spectrometry, it was confirmed that P. cremoricolorata strain ND07 produced N-octanoyl-L-homoserine lactone (C8-HSL) and N-decanoyl-L-homoserine lactone (C10-HSL). To the best of our knowledge, this is the first documentation on the production of C10-HSL in P. cremoricolorata strain ND07.
MeSH terms: Cell Communication/physiology*; Pseudomonas/classification*; Pseudomonas/isolation & purification; Pseudomonas/physiology*; Species Specificity; Quorum Sensing/physiology*; Acyl-Butyrolactones/metabolism*
Halogenated compounds are recalcitrant environmental pollutants prevalent in agricultural fields, waste waters and industrial by-products, but they can be degraded by dehalogenase-containing microbes. Notably, 2-haloalkanoic acid dehalogenases are employed to resolve optically active chloropropionates, as exemplified by the d-specific dehalogenase from Rhizobium sp. RCI (DehD), which acts on d-2-chloropropionate but not on its l-enantiomer. The catalytic residues of this dehalogenase responsible for its affinity toward d-2-chloropropionate have not been experimentally determined, although its three-dimensional crystal structure has been solved. For this study, we performed in silico docking and molecular dynamic simulations of complexes formed by this dehalogenase and d- or l-2-chloropropionate. Arg134 of the enzyme plays the key role in the stereospecific binding and Arg16 is in a position that would allow it to activate a water molecule for hydrolytic attack on the d-2-chloropropionate chiral carbon for release of the halide ion to yield l-2-hydroxypropionate. We propose that within the DehD active site, the NH group of Arg134 can form a hydrogen bond with the carboxylate of d-2-chloropropionate with a strength of ∼4 kcal/mol that may act as an acid-base catalyst, whereas, when l-2-chloropropionate is present, this bond cannot be formed. The significance of the present work is vital for rational design of this dehalogenase in order to confirm the involvement of Arg16 and Arg134 residues implicated in hydrolysis and binding of d-2-chloropropionate in the active site of d-specific dehalogenase from Rhizobium sp. RC1.
Profiles of orthodontic tooth movement biomarkers, i.e., Lactate Dehydrogenase (LDH), Aspartate Aminotransferase (AST), Tartrate-resistant Acid Phosphatase (TRAP) and Alkaline Phosphatase (ALP), using Self-ligating Brackets (SLBs) and possible relationships among their activities and total enzymes produced were determined.
Obstructive Sleep Apnea Syndrome (OSAS) has been associated with excessive daytime sleepiness, which may lead to reduced alertness. This study determines the distribution of OSAS among highly trained Malay male security personnel, an occupation that requires constant alertness.
Many industries discharge untreated wastewater into the environment. Heavy metals from many industrial processes end up as hazardous pollutants of wastewaters.Heavy metal pollution has increased in recent decades and there is a growing concern for the public health risk they may pose. To remove heavy metal ions from polluted waste streams, adsorption processes are among the most common and effective treatment methods. The adsorbents that are used to remove heavy metal ions from aqueous media have both advantages and disadvantages. Cost and effectiveness are two of the most prominent criteria for choosing adsorbents. Because cost is so important, great effort has been extended to study and find effective lower cost adsorbents.One class of adsorbents that is gaining considerable attention is agricultural wastes. Among many alternatives, palm oil biomasses have shown promise as effective adsorbents for removing heavy metals from wastewater. The palm oil industry has rapidly expanded in recent years, and a large amount of palm oil biomass is available. This biomass is a low-cost agricultural waste that exhibits, either in its raw form or after being processed, the potential for eliminating heavy metal ions from wastewater. In this article, we provide background information on oil palm biomass and describe studies that indicate its potential as an alternative adsorbent for removing heavy metal ions from wastewater. From having reviewed the cogent literature on this topic we are encouraged that low-cost oil-palm-related adsorbents have already demonstrated outstanding removal capabilities for various pollutants.Because cost is so important to those who choose to clean waste streams by using adsorbents, the use of cheap sources of unconventional adsorbents is increasingly being investigated. An adsorbent is considered to be inexpensive when it is readily available, is environmentally friendly, is cost-effective and be effectively used in economical processes. The advantages that oil palm biomass has includes the following:available and exists in abundance, appears to be effective technically, and can be integrated into existing processes. Despite these advantages, oil palm biomasses have disadvantages such as low adsorption capacity, increased COD, BOD and TOC. These disadvantages can be overcome by modifying the biomass either chemically or thermally. Such modification creates a charged surface and increases the heavy metal ion binding capacity of the adsorbent.
MeSH terms: Adsorption; Cellulose/chemistry; Charcoal/chemistry; Water Pollutants, Chemical/isolation & purification*; Water Purification/methods*; Biomass; Metals, Heavy/isolation & purification*; Arecaceae/chemistry*; Waste Water/chemistry*
Treating children with cyanotic congenital heart disease poses many challenges to anesthesiologists because of the multiple problems associated with the condition. The anesthetic technique and drugs used perioperatively can affect a patient's physiologic status during surgery. The adherence to certain hemodynamic objectives and the avoidance of factors that could worsen the abnormal cardiopulmonary physiology cannot be overemphasized. In the present case series, we describe the use of a dexmedetomidine-ketamine combination for dental extraction in spontaneously breathing children with cyanotic congenital heart disease. The anesthetic concerns regarding airway management, the pharmacologic effects of drugs, and maintenance of adequate hemodynamic, blood gases, and acid-base status are discussed.
MeSH terms: Acid-Base Equilibrium/drug effects; Anesthesia, Dental/methods*; Blood Pressure/drug effects; Child, Preschool; Down Syndrome/complications; Female; Heart Defects, Congenital/complications*; Heart Rate/drug effects; Humans; Hypnotics and Sedatives/administration & dosage*; Ketamine/administration & dosage*; Male; Oxygen/blood; Tetralogy of Fallot/complications; Tooth Extraction/methods*; Transposition of Great Vessels/complications; Conscious Sedation/methods*; Dental Care for Chronically Ill; Excitatory Amino Acid Antagonists/administration & dosage*; Dexmedetomidine/administration & dosage*; Airway Management/methods