Browse publications by year: 2023

  1. Dala Ali AHH, Harun SN, Othman N, Ibrahim B, Abdulbagi OE, Abdullah I, et al.
    Antibiotics (Basel), 2023 Aug 10;12(8).
    PMID: 37627725 DOI: 10.3390/antibiotics12081305
    In the management of sepsis, providing adequate empiric antimicrobial therapy is one of the most important pillars of sepsis management. Therefore, it is important to evaluate the adequacy of empiric antimicrobial therapy (EAMT) in sepsis patients admitted to intensive care units (ICU) and to identify the determinants of inadequate EAMT. The aim of this study was to evaluate the adequacy of empiric antimicrobial therapy in patients admitted to the ICU with sepsis or septic shock, and the determinants of inadequate EAMT. The data of patients admitted to the ICU units due to sepsis or septic shock in two tertiary healthcare facilities in Al-Madinah Al-Munawwarah were retrospectively reviewed. The current study used logistic regression analysis and artificial neural network (ANN) analysis to identify determinants of inadequate empiric antimicrobial therapy, and evaluated the performance of these two approaches in predicting the inadequacy of EAMT. The findings of this study showed that fifty-three per cent of patients received inadequate EAMT. Determinants for inadequate EAMT were APACHE II score, multidrug-resistance organism (MDRO) infections, surgical history (lower limb amputation), and comorbidity (coronary artery disease). ANN performed as well as or better than logistic regression in predicating inadequate EAMT, as the receiver operating characteristic area under the curve (ROC-AUC) of the ANN model was higher when compared with the logistic regression model (LRM): 0.895 vs. 0.854. In addition, the ANN model performed better than LRM in predicting inadequate EAMT in terms of classification accuracy. In addition, ANN analysis revealed that the most important determinants of EAMT adequacy were the APACHE II score and MDRO. In conclusion, more than half of the patients received inadequate EAMT. Determinants of inadequate EAMT were APACHE II score, MDRO infections, comorbidity, and surgical history. This provides valuable inputs to improve the prescription of empiric antimicrobials in Saudi Arabia going forward. In addition, our study demonstrated the potential utility of applying artificial neural network analysis in the prediction of outcomes in healthcare research.
  2. Keng ZX, Tan JJM, Phoon BL, Khoo CC, Khoiroh I, Chong S, et al.
    Bioengineering (Basel), 2023 Aug 07;10(8).
    PMID: 37627823 DOI: 10.3390/bioengineering10080938
    This work demonstrated the feasibility of an industrial-scale aerated static pile composting system for treating one of the common biowastes-soybean curd residue. The mixing ratios of the feedstock were optimized to achieve a carbon-nitrogen ratio and a moisture level in the ranges of 25-35 and 60-70%, respectively. This open-air composting system required 6-7 months to obtain a mature compost. Solvita and seed germination tests further confirmed the maturity of the compost, with 25% compost extract concentration yielding the best germination index in the absence of phytotoxicity. The bacterial and fungal compositions of the compost piles were further examined with metagenomic analysis. Thermoactinomyces spp., Oceanobacillus spp., and Kroppenstedtia spp. were among the unique bacteria found, and Diutina rugosa, Thermomyces dupontii, and Candida taylorii were among the unique fungi found in the compost piles, suggesting the presence of good microorganisms for degrading the organic biowastes.
  3. Chin FW, Hussin H, Chau DM, Ong TA, Yunus R, Abdul Razack AH, et al.
    Diagnostics (Basel), 2023 Aug 09;13(16).
    PMID: 37627895 DOI: 10.3390/diagnostics13162636
    Bladder cancer is a common urological cancer and has the highest recurrence rate of any cancer. The aim of our study was to profile and characterize the protein expression of homeobox A13 (HOXA13) and homeobox B13 (HOXB13) genes in Malaysian bladder cancer patients. The protein expression of HOXA13 and HOXB13 in formalin-fixed paraffin-embedded (FFPE) bladder cancer tissues was determined by immunohistochemistry (IHC) analysis. The association between HOXA13/HOXB13 protein expression and demographic/clinicopathological characteristics of the bladder cancer patients was determined by chi-square analysis. Approximately 63.6% of the bladder cancer tissues harbored high HOXA13 expression. High HOXA13 expression was significantly associated with non-muscle invasive bladder cancer, lower tumor grade, higher number of lymph node metastases, and recurrence risk. In contrast, low HOXB13 expression (including those with negative expression) was observed in 71.6% of the bladder cancer tissues analyzed. Low HOXB13 expression was significantly associated with muscle-invasive bladder cancer, higher tumor stage, tumor grade, and metastatic risk. Both HOXA13 and HOXB13 protein expression were found to be associated with bladder tumorigenesis. The putative oncogenic and tumor suppressive roles of HOXA13 and HOXB13, respectively, suggest their potential utility as biomarkers in bladder cancer.
  4. Chin FW, Chan SC, Veerakumarasivam A
    Diagnostics (Basel), 2023 Aug 10;13(16).
    PMID: 37627900 DOI: 10.3390/diagnostics13162641
    Homeobox genes serve as master regulatory transcription factors that regulate gene expression during embryogenesis. A homeobox gene may have either tumor-promoting or tumor-suppressive properties depending on the specific organ or cell lineage where it is expressed. The dysregulation of homeobox genes has been reported in various human cancers, including bladder cancer. The dysregulated expression of homeobox genes has been associated with bladder cancer clinical outcomes. Although bladder cancer has high risk of tumor recurrence and progression, it is highly challenging for clinicians to accurately predict the risk of tumor recurrence and progression at the initial point of diagnosis. Cystoscopy is the routine surveillance method used to detect tumor recurrence. However, the procedure causes significant discomfort and pain that results in poor surveillance follow-up amongst patients. Therefore, the development of reliable non-invasive biomarkers for the early detection and monitoring of bladder cancer is crucial. This review provides a comprehensive overview of the diagnostic and prognostic potential of homeobox gene expression dysregulation in bladder cancer.
  5. Fazdlin ARN, Rizuana IH, Ch'ng LS
    Diagnostics (Basel), 2023 Aug 16;13(16).
    PMID: 37627952 DOI: 10.3390/diagnostics13162693
    Post-traumatic vertebral arteriovenous fistula (vAVF) caused by motor vehicle accidents (MVA) is a rare condition in which there is abnormal communication between the vertebral artery and its adjacent veins. In a post-MVA setting, it is commonly associated with vertebral body fracture. In this paper, we report a case of a 19-year-old girl with a complete C2/C3 anterior and posterior ligament tear post MVA without any cervical bony injury. Initial plain computed tomography (CT) cervical scan showed a prevertebral hematoma. A CT angiogram (CTA) raised the suspicion of a pseudo-aneurysm at the right posterior C3 vertebral body. Further imaging with magnetic resonance imaging (MRI) demonstrated traumatic AVF at the C2/C3 level involving the V2/V3 right vertebral artery to the vertebral venous plexus. Digital Subtraction Angiography (DSA) further revealed a transected right vertebral artery at the C2/C3 level with an arteriovenous fistula and an enlarged vertebral venous plexus. The fistulous communication was successfully occluded with coils from a cranial and caudal approach to the transected segment right vertebral artery, with a total of eight coils. Post-MVA vertebral arteriovenous fistula (vAVF) is a rare sequela of vertebral bony injury at the cervical region, and is an even rarer association with an isolated ligamentous injury, whereby endovascular treatment with ipsilateral vertebral artery closure is a feasible treatment of vAVF.
  6. Su K, Sun W, Li Z, Huang T, Lou Q, Zhan S
    Foods, 2023 Aug 11;12(16).
    PMID: 37628026 DOI: 10.3390/foods12163027
    In this paper, the effects of different modification orders of microbial transglutaminase (MTGase) and contents of pectin (0.1-0.5%, w/v) on the gelling and structural properties of fish gelatin (FG) and the modification mechanism were studied. The results showed that the addition of pectin could overcome the phenomenon of high-MTGase-induced lower gelling strength of gelatin gels. At a low pectin content, the modification sequences had non-significant influence on the gelling properties of modified FG, but at a higher pectin content (0.5%, w/v), P0.5%-FG-TG had higher gel strength (751.99 ± 10.9 g) and hardness (14.91 ± 0.33 N) values than those of TG-FG-P0.5% (687.67 ± 20.98 g, 12.18 ± 0.45 N). Rheology analysis showed that the addition of pectin normally improved the gelation points and melting points of FG. The structural results showed that the fluorescence intensity of FG was decreased with the increase in pectin concentration. Fourier transform infrared spectroscopy analysis indicated that the MTGase and pectin complex modifications could influence the secondary structure of FG, but the influenced mechanisms were different. FG was firstly modified by MTGase, and then pectin (P-FG-TG) had the higher gelling and stability properties.
  7. Khushairay ESI, Ghani MA, Babji AS, Yusop SM
    Foods, 2023 Aug 14;12(16).
    PMID: 37628045 DOI: 10.3390/foods12163046
    This study aims to determine the effects of various alkaline pHs on the nutritional and functional properties of protein isolated from defatted chia flour (DCF). The DCF isolated using alkali extraction method at pH 8.5, 10.0, and 12.0 were coded as CPI-8.5, CPI-10.0, and CPI-12.0, respectively. The highest extraction yield and protein recovery yield was demonstrated by CPI-12.0 (19.10 and 59.63%, respectively), with a total protein content of 74.53%, and glutelin showed the highest portion (79.95%). The CPI-12.0 also demonstrated the most elevated essential (36.87%), hydrophobic (33.81%), and aromatic (15.54%) amino acid content among other samples. The DCF exhibited the highest water (23.90 gg-1) and oil (8.23 gg-1) absorption capacity, whereas the CPI-8.5 showed the highest protein solubility (72.31%) at pH 11. DCF demonstrated the highest emulsifying capacity at pH 11 (82.13%), but the highest stability was shown at pH 5 (82.05%). Furthermore, CPI-12.0 at pH 11 shows the highest foaming capacity (83.16%) and stability (83.10%). Despite that, the CPI-10.0 manifested the highest antioxidant capacity (DPPH: 42.48%; ABTS: 66.23%; FRAP: 0.19), as well as ACE-I (35.67%). Overall, the extraction pH had significant effects in producing chia protein isolates (CPI) with improved nutritional and functional qualities.
  8. Krishnapillai A, Kee CC, Ariaratnam S, Jaffar A, Omar MA, Sanaudi RB, et al.
    Healthcare (Basel), 2023 Aug 10;11(16).
    PMID: 37628448 DOI: 10.3390/healthcare11162249
    BACKGROUND: Globally, the average age of the world's population of older people continues to rise and having a good social support network becomes increasingly relevant with the aging populace. Overall, in Malaysia, social support prevalence was low among older persons. This study was conducted to determine the association between social support and smoking status among the older Malaysian population.

    METHODS: Data were obtained from the National Health and Morbidity (NHMS) 2018 survey on the health of older Malaysian adults and analyzed. This cross-sectional population-based study used a two-stage stratified random sampling design. Sociodemographic characteristics, smoking status, and social support data were collected from respondents aged 60 years and more. A validated Malay language interviewer-administered questionnaire of 11-items, the Duke Social Support Index, was utilized to assess the social support status. A multivariable logistic regression analysis was used to assess the association of social support and smoking status among the respondents.

    RESULTS: The prevalence of good social support was significantly higher among the 60-69 years old (73.1%) compared to the ≥80 years old respondents (50%). Multivariate logistic regression analysis showed that respondents aged ≥80 years old were 1.7 times more likely to have poor social support compared to those aged 60-69 years. Respondents with no formal education were 1.93 times more likely to have poor social support compared to respondents who had tertiary education. Respondents with an income of MYR 3000. Former smokers had good social support compared to current smokers (73.6% vs. 78.7%). For current smokers, they had poor social support, which is almost 1.42 times higher than that for non-smokers.

    CONCLUSION: There was poor social support among older people who were current smokers, had an increased age, had no formal education and had a low income. The findings obtained from this study could assist policymakers to develop relevant strategies at the national level to enhance the social support status among older smokers and aid in their smoking cessation efforts.

  9. Mohamad N, Ismail R, Ibrahim MF, Abdul Shukor IH, Mohamad MZ, Mahmud MF, et al.
    Healthcare (Basel), 2023 Aug 18;11(16).
    PMID: 37628536 DOI: 10.3390/healthcare11162339
    During the COVID-19 pandemic, persons under surveillance (PUS) were isolated in quarantine centres instead of at home. However, there is limited knowledge regarding the mental health issues experienced by these persons. This study aimed to assess mental health outcomes and associated factors among PUS and frontline workers at quarantine centres. This study conducted an analysis of secondary data from a cross-sectional survey carried out by the Mental Health and Psychosocial Support Services (MHPSS). The MHPSS employed the Depression, Anxiety, and Stress Scale (DASS-21) to evaluate mental health outcomes across 49 quarantine centres in Malaysia. The study included a total of 4577 respondents. The prevalence of stress, anxiety, and depression was found to be 0.9%, 11.4%, and 10.2%, respectively. Frontline workers and being part of the younger age group were found to be associated with depression, anxiety, and stress. Other factors associated with mental health issues were being female, staying at an institution-type centre, and a longer duration of the stay or work at the centre. In conclusion, assessing the mental health status and its associated factors among quarantine centre occupants is crucial for developing future strategies to safeguard their mental well-being.
  10. Kah Sem NAD, Abd Gani S, Chong CM, Natrah I, Shamsi S
    Int J Mol Sci, 2023 Aug 08;24(16).
    PMID: 37628723 DOI: 10.3390/ijms241612542
    Vibriosis is one of the most common diseases in marine aquaculture, caused by bacteria belonging to the genus Vibrio, that has been affecting many species of economically significant aquatic organisms around the world. The prevention of vibriosis in aquaculture is difficult, and the various treatments for vibriosis have their limitations. Therefore, there is an imperative need to find new alternatives. This review is based on the studies on vibriosis, specifically on the various treatments and their limitations, as well as the application of nanoparticles in aquaculture. One of the promising nanoparticles is graphene oxide (GO), which has been used in various applications, particularly in biological applications such as biosensors, drug delivery, and potential treatment for infectious diseases. GO has been shown to have anti-bacterial properties against both Gram-positive and Gram-negative bacteria, but no research has been published that emphasizes its impact on Vibrio spp. The review aims to explore the potential use of GO for treatment against vibriosis.
    MeSH terms: Anti-Bacterial Agents/pharmacology; Anti-Bacterial Agents/therapeutic use; Gram-Negative Bacteria; Gram-Positive Bacteria; Humans; Aquaculture; Nanoparticles*
  11. Lazim N, Elias MH, Sutaji Z, Abdul Karim AK, Abu MA, Ugusman A, et al.
    Int J Mol Sci, 2023 Aug 17;24(16).
    PMID: 37629050 DOI: 10.3390/ijms241612869
    The homeobox A10 (HOXA10) gene is known to be related to endometriosis; however, due to a lack of knowledge/evidence in the pathogenesis of endometriosis, the mechanisms that link HOXA10 to endometriosis still need to be clarified. This review addresses the difference in the expression of the HOXA10 gene in endometriotic women versus non-endometriotic women across populations by country and discusses its influences on women's fertility. An organized search of electronic databases was conducted in Scopus, ScienceDirect, PubMed, and Web of Science. The keywords used were (HOXA10 OR "homeobox A10" OR PL OR HOX1 OR HOX1H OR HOX1.8) AND ("gene expression") AND (endometriosis). The initial search resulted in 623 articles, 10 of which were included in this review. All ten papers included in this study were rated fair in terms of the quality of the studies conducted. The expression of the HOXA10 gene was found to be downregulated in most studies. However, one study provided evidence of the downregulation and upregulation of HOXA10 gene expression due to the localization of endometriotic lesions. Measuring the expression of the HOXA10 gene in women is clinically essential to predicting endometriosis, endometrial receptivity, and the development of pinopodes in the endometrium during the luteal phase.
    MeSH terms: Female; Genes, Homeobox; Humans; Databases, Factual; Benzeneacetamides*
  12. Mohd N, Razali M, Fauzi MB, Abu Kasim NH
    Int J Mol Sci, 2023 Aug 17;24(16).
    PMID: 37629064 DOI: 10.3390/ijms241612881
    Three-dimensional (3D) bioprinting is a unique combination of technological advances in 3D printing and tissue engineering. It has emerged as a promising approach to address the dilemma in current dental treatments faced by clinicians in order to repair or replace injured and diseased tissues. The exploration of 3D bioprinting technology provides high reproducibility and precise control of the bioink containing the desired cells and biomaterial over the architectural and dimensional features of the scaffolds in fabricating functional tissue constructs that are specific to the patient treatment need. In recent years, the dental applications of different 3D bioprinting techniques, types of novel bioinks, and the types of cells used have been extensively explored. Most of the findings noted significant challenges compared to the non-biological 3D printing approach in constructing the bioscaffolds that mimic native tissues. Hence, this review focuses solely on the implementation of 3D bioprinting techniques and strategies based on cell-laden bioinks. It discusses the in vitro applications of 3D-bioprinted scaffolds on cell viabilities, cell functionalities, differentiation ability, and expression of the markers as well as the in vivo evaluations of the implanted bioscaffolds on the animal models for bone, periodontal, dentin, and pulp tissue regeneration. Finally, it outlines some perspectives for future developments in dental applications.
    MeSH terms: Animals; Biocompatible Materials*; Cell Differentiation; Cell Survival; Reproducibility of Results; Bioprinting*
  13. Selvakumar D, Sivanandy P, Ingle PV, Theivasigamani K
    Medicina (Kaunas), 2023 Jul 31;59(8).
    PMID: 37629691 DOI: 10.3390/medicina59081401
    A prospective study was conducted to investigate the impact of treatment burden and health literacy on medication adherence among older adults with multiple chronic conditions (MCC) and to explore the potential moderating effects of demographic and clinical factors. Face-to-face structured interviews were conducted among older adults aged 60 and above using the Burden of Treatment Questionnaire (TBQ-15), Short Form Health Literacy Questionnaire (HLS-SF12), and Malaysia Medication Adherence Assessment Tool (MyMAAT). This study included 346 older adults aged 60 years and above with two or more chronic conditions (n = 346). Hypertension (30.2%), hyperlipidemia (24.0%), and diabetes (18.0%) were the most reported chronic conditions among participants. The mean score of treatment burden was 53.4 (SD = 28.2), indicating an acceptable burden of treatment. The mean score of health literacy was 16.4 (SD = 12.6), indicating a limited health literacy level among participants; meanwhile, the mean score of medication adherence was 32.6 (SD = 12.3), indicating medication non-adherence among participants. Medication adherence was significantly correlated with treatment burden (r = -0.22, p < 0.0001), health literacy (r = 0.36, p < 0.0001), number of chronic conditions (r = -0.23, p < 0.0001), and age (r = -0.11, p < 0.05). The study findings emphasize that multimorbid older adults with high treatment burdens and low health literacy are more likely to have poor medication adherence. This underscores the importance for clinicians to address these factors in order to improve medication adherence among older adults with multiple chronic conditions (MCC).
    MeSH terms: Adaptation, Psychological; Aged; Humans; Prospective Studies; Medication Adherence; Health Literacy*; Multiple Chronic Conditions*
  14. Abd Karim SB, Norman S, Koting S, Simarani K, Loo SC, Mohd Rahim FA, et al.
    Materials (Basel), 2023 Aug 08;16(16).
    PMID: 37629806 DOI: 10.3390/ma16165515
    The rapid economic and industrial growth experienced in the Asian region has significantly increased waste production, particularly single-use plastic. This surge in waste poses a significant challenge for these countries' municipal solid waste management systems. Consequently, there is a pressing need for progressive and effective solutions to address the plastic waste issue. One promising initiative involves utilizing used plastic to produce components for asphalt pavement. The concept of plastic road technology has gained traction in Asia, with 32 countries displaying varying levels of interest, ranging from small-scale laboratory experiments to large-scale construction projects. However, as a relatively new technology, plastic road implementation requires continuous and comprehensive environmental and health risk assessments to ascertain its viability as a reliable green technology. This review paper presents the current findings and potential implementation of plastic-modified asphalt in Asian countries, with particular attention given to its environmental and human health impacts. While plastic asphalt roads hold promise in waste reduction, improved asphalt properties, and cost savings, it is imperative to thoroughly consider the environmental and health impacts, quality control measures, recycling limitations, and long-term performance of this road construction material. Further research and evaluation are needed to fully understand the viability and sustainability of plastic asphalt roads. This will enable a comprehensive assessment of its potential benefits and drawbacks, aiding in developing robust guidelines and standards for its implementation. By addressing these considerations, it will be possible to optimize the utilization of plastic waste in road construction and contribute to a greener and more sustainable future.
  15. Razali M, Chai WL, Omar RA, Ngeow WC
    Materials (Basel), 2023 Aug 09;16(16).
    PMID: 37629819 DOI: 10.3390/ma16165529
    INTRODUCTION: The objective of this study was to examine the effect of photofunctionalization on the soft-tissue contour formed at the interface of various abutment materials using end-point analyses obtained from the three-dimensional oral mucosal model (3D-OMMs).

    METHODS: Commercially pure titanium (CPTi), alumina-toughened zirconia (ATZ), and yttria-stabilized zirconia (YSZ) made into discs shapes were classified into two groups: UV-treated (PTx) and non-treated (NTx). The materials in PTx groups were exposed to UV light for 12 min. Human gingival fibroblasts and TR146 epithelial cell lines co-cultured on the acellular dermal membrane were used to construct the 3D-OMM. After 4 days of culture, the discs were inserted into the holes prepared within the membrane of 3D-OMMs. The contour formed by the tissue was evaluated after 14 days of culture.

    RESULTS: The UV treatment of abutment materials resulted in the formation of more non-pocket-tissue types among the PTx group (p = 0.002). Of all materials tested, soft tissue contour around YSZ showed higher scores for the non-pocket type in both non- and UV-treated groups.

    CONCLUSIONS: The non-pocket type of tissue attachment was frequently found in all surfaces modified by photofunctionalization, particularly zirconia. The 3D-OMM can be used to evaluate the biological endpoints of implant surface modifications.

  16. Raditya VYA, Lubis MAR, Sari RK, Antov P, Lee SH, Kristak L, et al.
    Materials (Basel), 2023 Aug 20;16(16).
    PMID: 37629995 DOI: 10.3390/ma16165704
    The textile industries need an alternative to cotton since its supply is unable to keep up with the growing global demand. The ramie (Boehmeria nivea (L.) Gaudich) fiber has a lot of potential as a renewable raw material but has low fire-resistance, which should be improved. In this work, the objectives were to investigate the characteristics of lignin derived from black liquor of kraft pulping, as well as the properties of the developed lignin-based non-isocyanate-polyurethane (L-NIPU), and to analyze ramie fiber before and after impregnation with L-NIPU. Two different formulations of L-NIPU were impregnated into ramie fiber for 30, 60, and 90 min at 25 × 2 °C under 50 kPa. The calculation of the Weight Percent Gain (WPG), Fourier Transform Infrared Spectrometer (FTIR), Rotational Rheometer, Dynamic Mechanical Analyzer (DMA), Pyrolysis Gas Chromatography Mass Spectrometer (Py-GCMS), Universal Testing Machine (UTM), and hydrolysis test were used to evaluate the properties of ramie fibers. The result showed that ramie fiber impregnated with L-NIPU produced higher mechanical property values and WPG than non-impregnated ramie fiber. There is a tendency that the longer impregnation time results in better WPG values, FTIR intensity of the urethane group, thermomechanical properties, crystallinity, and mechanical properties of ramie fiber. However, the use of DMC and HMT cannot replace the role of isocyanates in the synthesis of L-NIPU because it produces lower heat resistance than ramie impregnated using pMDI. Based on the results obtained, the impregnation of ramie fiber with L-NIPU represents a promising approach to increase its wider industrial application as a functional material.
  17. Jetti CR, Addepalli T, Devireddy SR, Tanimki GK, Al-Gburi AJA, Zakaria Z, et al.
    Micromachines (Basel), 2023 Jul 31;14(8).
    PMID: 37630079 DOI: 10.3390/mi14081545
    A novel compact-slotted four element multiple input multiple output (MIMO) planar monopole antenna is proposed for 5G mmWave N257/N258 and N262 band applications. The antenna, with dimensions of 12 mm × 11.6 mm × 0.508 mm (1.036λo ×1.001λo×0.043λo where λo is computed at lowest cutoff frequency), is fabricated on a Rogers RT/duroid 5880 (tm) substrate with a relative permittivity of 2.2 and a dielectric loss tangent of 0.0009. The suggested antenna consists of four U-shaped radiating elements (patches) on top of the dielectric material and a slotted ground on the bottom. The radiating elements are fed by a 50-ohm microstrip line feed. To improve the impedance performance of the MIMO antenna, a rectangular strip of 1.3 mm × 0.2 mm and a couple of rectangular slots are added to each radiating element. The first operating band at 27.1 GHz, ranging from 25.9 GHz to 27.8 GHz, is achieved by using slotted U-shaped radiating elements. The second operating band at 48.7 GHz, ranging from 47.1 GHz to 49.9 GHz, is obtained by etching hexagonal slots on the ground. The antenna design achieves an isolation of >27 dB through the orthogonal positioning of radiating elements and slots on the ground. The designed antenna operates at 27 GHz (N257/N258) and 48.7 GHz (N262) bands, exhibiting stable radiation patterns, a peak gain of >5.95 dBi, radiation efficiency of >90%, an envelope correlation coefficient of <10-6, a total active reflection coefficient of ≤-10 dB, channel capacity losses of <0.03 bits/s/Hz, and a mean effective gain of ≤-3 dB. The simulated and measured results of the antenna show good agreement, making it well-suited for 5G mmWave communication applications.
  18. Samad MIA, Ponnuthurai DR, Badrudin SI, Ali MAM, Razak MAA, Buyong MR, et al.
    Micromachines (Basel), 2023 Aug 17;14(8).
    PMID: 37630162 DOI: 10.3390/mi14081625
    Dielectrophoresis (DEP) is one of the microfluid-based techniques that can manipulate the red blood cells (RBC) for blood plasma separation, which is used in many medical screening/diagnosis applications. The tapered aluminium microelectrode array (TAMA) is fabricated for potential sensitivity enhancement of RBC manipulation in lateral and vertical directions. In this paper, the migration properties of dielectrophoretically manipulated RBC in TAMA platform are studied at different peak-to-peak voltage (Vpp) and duration supplied onto the microelectrodes. Positive DEP manipulation is conducted at 440 kHz with the RBC of 4.00 ± 0.2 µm average radius attracted to the higher electric field intensity regions, which are the microelectrodes. High percentage of RBC migration occurred at longer manipulation time and high electrode voltage. During DEP manipulation, the RBC are postulated to levitate upwards, experience the electro-orientation mechanism and form the pearl chains before migrating to the electrodes. The presence of external forces other than the dielectrophoretic force may also affect the migration response of RBC. The safe operating limit of 10 Vpp and manipulation duration of ≤50 s prevent RBC rupture while providing high migration percentage. It is crucial to define the safe working region for TAMA devices that manipulate small RBC volume (~10 µL).
  19. Windarsih A, Bakar NKA, Dachriyanus, Yuliana ND, Riswanto FDO, Rohman A
    Molecules, 2023 Aug 09;28(16).
    PMID: 37630216 DOI: 10.3390/molecules28165964
    Beef sausage (BS) is one of the most favored meat products due to its nutrition and good taste. However, for economic purposes, BS is often adulterated with pork by unethical players. Pork consumption is strictly prohibited for religions including Islam and Judaism. Therefore, advanced detection methods are highly required to warrant the halal authenticity of BS. This research aimed to develop a liquid chromatography-high-resolution mass spectrometry (LC-HRMS) method to determine the halal authenticity of BS using an untargeted metabolomics approach. LC-HRMS was capable of detecting various metabolites in BS and BS containing pork. The presence of pork in BS could be differentiated using principal component analysis (PCA) and partial least squares-discriminant analysis (PLS-DA) with high accuracy. PLS-DA perfectly classified authentic BS and BS containing pork in all concentration levels of pork with R2X = (0.821), R2Y(= 0.984), and Q2 = (0.795). The level of pork in BS was successfully predicted through partial least squares (PLS) and orthogonal PLS (OPLS) chemometrics. Both models gave high R2 (>0.99) actual and predicted values as well as few errors, indicating good accuracy and precision. Identification of discriminating metabolites' potential as biomarker candidates through variable importance for projections (VIP) value revealed metabolites of 2-arachidonyl-sn-glycero-3-phosphoethanolamine, 3-hydroxyoctanoylcarnitine, 8Z,11Z,14Z-eicosatrienoic acid, D-(+)-galactose, oleamide, 3-hydroxyhexadecanoylcarnitine, arachidonic acid, and α-eleostearic acid as good indicators to detect pork. It can be concluded that LC-HRMS metabolomics combined with PCA, PLS-DA, PLS, and OPLS was successfully used to detect pork adulteration in beef sausages. The results imply that LC-HRMS untargeted metabolomics in combination with chemometrics is a promising alternative as an analytical technique to detect pork in sausage products. Further analysis of larger samples is required to warrant the reproducibility.
    MeSH terms: Red Meat*; Animals; Cattle; Meat Products*; Swine; Reproducibility of Results; Metabolomics
  20. Gammoh S, Alu'datt MH, Alhamad MN, Tranchant CC, Rababah T, Al-U'datt D, et al.
    Molecules, 2023 Aug 11;28(16).
    PMID: 37630264 DOI: 10.3390/molecules28166012
    This research aimed to determine the biofunctional properties of wheat flour (WF) protein fractions and modifications to the antioxidant, anti-α-amylase and anti-angiotensin-I converting enzyme (ACE) activities induced by the action of digestive endopeptidases in vitro. A molecular characterization of the most abundant protein fractions, i.e., albumins, glutelins-1, glutelins-2 and prolamins, showed that low- and high-MW polypeptides rich in cysteine, glutamic acid and leucine were present in albumins and glutelins, whereas low-MW subunits with a high proportion of polar amino acids prevailed in prolamins. Prolamins exhibited the second-highest water holding capacity (54%) after WF (84%), while albumins provided superior foam stability (76%). Prolamins, glutenins-1 and globulins demonstrated the highest antioxidant activity (up to 95%, 68% and 59%, respectively) both before and after hydrolysis with pepsin (P-H) or trypsin-chymotrypsin (TC-H). Prolamins, globulins and WF strongly inhibited α-amylase (>90%) before and after TC-H, and before P-H (55-71%). Moreover, P-H significantly increased α-amylase inhibition by albumins from 53 to 74%. The fractions with strong ACE inhibitory activity (70-89%) included prolamins and globulins after TC-H or P-H, as well as globulins before TC-H and WF before P-H. This novel evidence indicates that WF protein fractions and their peptide-enriched P and TC hydrolysates are excellent sources of multifunctional bioactives with antioxidant, antihyperglycemic and antihypertensive potential.
    MeSH terms: Albumins; alpha-Amylases; Flour; Gastrointestinal Agents; Glutens; Triticum*
External Links