Displaying publications 1 - 20 of 149 in total

Abstract:
Sort:
  1. Jantan I, Norahmad NA, Yuandani, Haque MA, Mohamed-Hussein ZA, Mohd Abd Razak MR, et al.
    PMID: 38619217 DOI: 10.1080/10408398.2024.2341266
    Inflammatory cascades of the dysregulated inflammatory pathways in COVID-19 can cause excessive production of pro-inflammatory cytokines and chemokines leading to cytokine storm syndrome (CSS). The molecular cascades involved in the pathways may be targeted for discovery of new anti-inflammatory agents. Many plant extracts have been used clinically in the management of COVID-19, however, their immunosuppressive activities were mainly investigated based on in silico activity. Dietary flavonoids of the extracts such as quercetin, luteolin, kaempferol, naringenin, isorhamnetin, baicalein, wogonin, and rutin were commonly identified as responsible for their inhibitory effects. The present review critically analyzes the anti-inflammatory effects and mechanisms of phytochemicals, including dietary compounds against cytokine storm (CS) and hyperinflammation via inhibition of the altered inflammatory pathways triggered by SARS-CoV-2, published since the emergence of COVID-19 in December 2019. Only a few phytochemicals, mainly dietary compounds such as nanocurcumin, melatonin, quercetin, 6-shagoal, kaempferol, resveratrol, andrographolide, and colchicine have been investigated either in in silico or preliminary clinical studies to evaluate their anti-inflammatory effects against COVID-19. Sufficient pre-clinical studies on safety and efficacy of anti-inflammatory effects of the phytochemicals must be performed prior to proper clinical studies to develop them into therapeutic adjuvants in the prevention and treatmemt of COVID-19 symptoms.
  2. Ibrahim S, Abdul Wahab N
    Water Sci Technol, 2024 Apr;89(7):1701-1724.
    PMID: 38619898 DOI: 10.2166/wst.2024.099
    Hyperparameter tuning is an important process to maximize the performance of any neural network model. This present study proposed the factorial design of experiment for screening and response surface methodology to optimize the hyperparameter of two artificial neural network algorithms. Feed-forward neural network (FFNN) and radial basis function neural network (RBFNN) are applied to predict the permeate flux of palm oil mill effluent. Permeate pump and transmembrane pressure of the submerge membrane bioreactor system are the input variables. Six hyperparameters of the FFNN model including four numerical factors (neuron numbers, learning rate, momentum, and epoch numbers) and two categorical factors (training and activation function) are used in hyperparameter optimization. RBFNN includes two numerical factors such as a number of neurons and spreads. The conventional method (one-variable-at-a-time) is compared in terms of optimization processing time and the accuracy of the model. The result indicates that the optimal hyperparameters obtained by the proposed approach produce good accuracy with a smaller generalization error. The simulation results show an improvement of more than 65% of training performance, with less repetition and processing time. This proposed methodology can be utilized for any type of neural network application to find the optimum levels of different parameters.
  3. M KS, Alengaram UJ, Ibrahim S, Vello V, Phang SM
    Environ Sci Pollut Res Int, 2024 Apr;31(17):25538-25558.
    PMID: 38478311 DOI: 10.1007/s11356-024-32784-2
    This study investigated the potential use of microalgae as partial cement replacement to heal cracks in cement mortar. Microbially induced calcite (CaCO3) precipitation (MICP) from Arthrospira platensis (A. platensis) (UMACC162) was utilised for crack-healing applications. Microalgae was cultivated in Kosaric Media (KM) together with filtered cement water (FCW), and used as a cement replacement material. The microalgal species was further evaluated for its capacity and adaptability towards large-scale culturing. The results showed that A. platensis could adapt and survive in cement water solution and cement mortar, suggesting the potential for self-healing in cement mortar. Further, the cultured species grown in both conditions (KM and KM & FCW) were harvested and incorporated into the cement mortar as a partial cement replacement material at different levels of 5%, 10%, 20%, and 30% of cement weight. The cement mortars partially replaced with microalgae were cured in water for 28 days. Pre-cracks were induced in the cured mortar with the 75% of their ultimate load. It took just 14 days for the microalgae-incorporated mortar to heal the cracks. The specimens with microalgae cultured in FCW showed a better performance and recovered 59% of their strength, with a maximum healed crack width of 0.7 mm. In terms of water tightness and porosity, they are comparable to the control mortar. The compressive strength measurements indicated the formation of calcite aggregate (crystal) that sealed the surface cracks, which was confirmed by a microstructural analysis. The results also demonstrate that the incorporation of microalgae into cement produced a self-healing effect, providing a new direction for crack healing. Additionally, the investigation indicated that replacing cement with microalgae reduced CO2 emissions by as much as 30%, with a substitution of 30% of microalgae. Exploring microalgae as a cement replacement could reduce carbon emissions and improve the state of the environment.
  4. Ng YH, Chai YC, Mazli N, Jaafar NF, Ibrahim S
    Malays Orthop J, 2024 Mar;18(1):60-65.
    PMID: 38638655 DOI: 10.5704/MOJ.2403.008
    INTRODUCTION: To describe the duration of survival among bone tumour patients with endoprosthesis reconstruction and to determine frequency of implant failure, revision of surgery, and amputation after endoprosthesis reconstruction.

    MATERIALS AND METHODS: A retrospective cross-sectional review of all patients with either primary bone tumour or secondary bone metastases treated with en bloc resection and endoprosthesis reconstruction from January 2008 to December 2020.

    RESULTS: A total of 35 failures were recorded among the 27 (48.2%) patients with endoprostheses. Some of the patients suffered from one to three types of modes of failure on different timelines during the course of the disease. Up to eight patients suffered from more than one type of failure throughout the course of the disease. Out of all modes of failure, local recurrence (type 5 failure) was the most common, accounting for 25.0% of all failure cases. Four patients (7.1%) eventually underwent amputation, which were either due to infection (2 patients) or disease progression causing local recurrence (2 patients).

    CONCLUSION: The overall result of endoprosthesis reconstruction performed in our centre was compatible with other centres around the world. Moreover, limb salvage surgery should be performed carefully in a selected patient group to maximise the benefits of surgery.

  5. Yin J, Ibrahim S, Mohd NNA, Zhong C, Mao X
    Environ Sci Pollut Res Int, 2024 Jan;31(2):2836-2850.
    PMID: 38063969 DOI: 10.1007/s11356-023-31231-y
    Carbon reduction has become a major challenge for China's economy in its transition toward sustainability. The government has been monitoring the behavior of enterprises through regulations to protect the environment, while green finance has rapidly developed in recent years as a new tool to reduce carbon emissions. Despite these measures, few studies have explored the interaction between these two drivers of carbon reduction. Therefore, this study aimed to examine the impact of green finance and environmental regulations on carbon emissions. To determine whether their coordination can lead to greater carbon reduction, the spatial spillover effect of this impact was also investigated. The results show that green finance can reduce carbon emissions and that the interaction of green finance with environmental regulations plays a significant positive role in reducing carbon emissions. Finally, this study concludes that the carbon reduction effects of green finance and environmental regulations have positive spillover effects on adjacent areas.
  6. Juhim F, Chee FP, Awang A, Moh PY, Mohd Salleh KA, Ibrahim S, et al.
    Heliyon, 2023 Nov;9(11):e22529.
    PMID: 38074862 DOI: 10.1016/j.heliyon.2023.e22529
    Radiation shielding incorporates material between the radioactive source and environment to decrease exposure to hazardous radiation. It remains to be seen whether the addition of nanoparticles effectively increases the protection of tellurite glass system from further degradation under irradiation conditions. This study revealed the gamma radiation effects on tellurite glass. The tellurite glass samples were irradiated with 50 kGy and 100 kGy gamma ray, and subsequently analysed using X-ray diffractometer (XRD), atomic force microscopy (AFM), and ultraviolet-visible spectroscopy (UV-Vis). Gamma radiation increased the creation of non-bridging oxygen (NBO) and caused colour change on TZNETi and TZNETiAl glasses. Consequently, the addition of aluminium oxides (Al2O3) was found to lower the density of glass systems. The glass samples surface roughness increased, while the optical transmission spectra decreased after 50 kGy of gamma ray irradiation. Nevertheless, the glass system maintained its transparency even after irradiation. The mass attenuation coefficient (MAC) values represented the shielding effectiveness demonstrated by the investigated glass with the addition of Al2O3. The physical, structural, optical, and radiation shielding properties showed that 69.1TeO2-20ZnO-9Na2O-1Er2O3-0.3TiO2-0.6Al2O3 (TZNETiAl) sample exhibited strong shielding properties amongst the fabricated tellurite samples.
  7. Zubair HT, Bradley DA, Khairina MD, Oresegun A, Basaif A, Othman J, et al.
    Sci Rep, 2023 Jul 24;13(1):11918.
    PMID: 37488183 DOI: 10.1038/s41598-023-39180-9
    We have developed a radioluminescence-based survey meter for use in industries in which there is involvement in naturally occurring radioactive material (NORM), also in support of those needing to detect other weak emitters of radiation. The functionality of the system confronts particular shortcomings of the handheld survey meters that are currently being made use of. The device couples a LYSO:Ce scintillator with a photodetector via a polymer optical fibre waveguide, allowing for "intrinsically safe" inspection within pipework, separators, valves and other such component pieces. The small-diameter optical fibre probe is electrically passive, immune to electromagnetic interference, and chemically inert. The readout circuit is entirely incorporated within a handheld casing housing a silicon photomultiplier (SiPM) detection circuit and a microprocessor circuit connected to an LCD display. A 15 m long flexible PMMA optical fibre waveguide is butt coupled to an ABS plastic probe that retains the LYSO:Ce scintillator. Initial tests have included the use of lab-based mixed gamma-ray sources, measurements being made in concert with a reference conventional GM survey-meter. Characterization, via NORM sources at a decontamination facility, has shown useful sensitivity, covering the dose-rate range 0.10- to 28 µSv h-1 (R-squared 0.966), extending to 80 µSv/h as demonstrated in use of a Cs-137 source. The system is shown to provide an effective tool for detection of radioactivity within hard to access locations, in particular for sources emitting at low radiation levels, down to values that approach background.
  8. Logarajan RD, Nor NM, Ibrahim S, Said R
    Nutrition, 2023 Jul;111:112030.
    PMID: 37172456 DOI: 10.1016/j.nut.2023.112030
    OBJECTIVE: This study aims to assess social determinants of stunting among children aged <5 y within the Malay ethnicity in Malaysia.

    METHODS: This study used data from the National Health and Morbidity Survey 2016: Maternal and Child Health. It includes a sample of 10 686 children, ages 0 to 59 mo, of Malay ethnicity. Height-for-age z score was determined based on the World Health Organization Anthro software. A binary logistic regression model was used to examine the association between the selected social determinants and the occurrence of stunting.

    RESULTS: About 22.5% of children aged <5 y of Malay ethnicity were stunted. For those ages 0 to 23 mo, stunting is more prevalent in boys, in rural areas, and in those who have screen exposure, whereas a reduction of stunting was observed for those children whose mothers work in the private sector and in those who consume formula milk and meat. As for those ages 24 to 59 mo, there was a higher prevalence of stunting for those with self-employed mothers and reduced prevalence in children with hygienic waste disposal practices as well as those who play with toys.

    CONCLUSIONS: The prevalence of stunting among children of Malay ethnicity aged <5 in Malaysia necessitates immediate intervention. It is pertinent to facilitate early identification of those children at risk of stunting for additional care to promote healthy growth.

  9. Su G, Zulkifli NWM, Ong HC, Ibrahim S, Cheah MY, Zhu R, et al.
    Energy (Oxf), 2023 Jun 15;273:127221.
    PMID: 36942281 DOI: 10.1016/j.energy.2023.127221
    The ongoing global pandemic of COVID-19 has devastatingly influenced the environment, society, and economy around the world. Numerous medical resources are used to inhibit the infectious transmission of the virus, resulting in massive medical waste. This study proposes a sustainable and environment-friendly method to convert hazardous medical waste into valuable fuel products through pyrolysis. Medical protective clothing (MPC), a typical medical waste from COVID-19, was utilized for co-pyrolysis with oil palm wastes (OPWs). The utilization of MPC improved the bio-oil properties in OPWs pyrolysis. The addition of catalysts further ameliorated the bio-oil quality. HZSM-5 was more effective in producing hydrocarbons in bio-oil, and the relevant reaction pathway was proposed. Meanwhile, a project was simulated to co-produce bio-oil and electricity from the co-pyrolysis of OPWs and MPC from application perspectives. The techno-economic analysis indicated that the project was economically feasible, and the payback period was 6.30-8.75 years. Moreover, it was also environmentally benign as its global warming potential varied from -211.13 to -90.76 kg CO2-eq/t. Therefore, converting MPC and OPWs into biofuel and electricity through co-pyrolysis is a green, economic, and sustainable method that can decrease waste, produce valuable fuel products, and achieve remarkable economic and environmental benefits.
  10. Munir MA, Rahmawati F, Jamal JA, Ibrahim S, Said MM, Ahmad MS
    ACS Omega, 2023 Apr 11;8(14):13352-13361.
    PMID: 37065053 DOI: 10.1021/acsomega.3c00768
    Numerous analytical approaches have been developed to determine histamine levels in food samples due to its health consequences. Consuming histamine over the Food and Drug Administration (FDA)-regulated 50 mg kg-1 limit would result in chronic toxicity. Consequently, the present study discusses a novel electrochemical approach to evaluate histamine levels in fish products via a molecularly imprinted polymer (MIP) on an electrode surface. The film was produced with electropolymerized polyurethane (PU), which maintained the histamine compound. Fourier-transform infrared (FTIR) spectroscopy was applied to verify the MIP manufactured in this study. The capability of the polymer was measured by assessing its electron shifts with cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Differential pulse voltammetry (DPV) was also employed to validate the sensing method. The MIP/screen-printed electrode (SPE) and non-imprinted polymer (NIP)/SPE recorded a linear response ranging from 1 to 1000 nmol L-1 at the 1.765 and 709 nmol L-1 detection limits. The sensing technique was subsequently utilized to determine the histamine levels in selected samples at room temperature (25 °C). Generally, the sensor allowed the accurate and precise detection of histamine in the fish samples. Furthermore, the approach could be categorized as a simple technique that is low-cost and suitable for on-site detections.
  11. Mohd-Razali S, Ahmad-Affandi K, Ibrahim S, Abdul-Rashid AH, Abdul-Shukor N
    Malays Orthop J, 2023 Mar;17(1):180-183.
    PMID: 37064633 DOI: 10.5704/MOJ.2303.021
    Purpura fulminans (PF) is a severe clinical manifestation of Neisseria meningitides infection that is associated with high mortality rates in children. Survivors are frequently left with debilitating musculoskeletal sequelae. There is a paucity of reports on the musculoskeletal pathology of purpura fulminans. We report on a 2-year-old boy with purpura fulminans due to meningococcemia. The child developed distal gangrene in both the upper and lower limbs. Amputations were done for both lower limbs. Histological examination of the amputated specimens showed an inflammatory process and features of osteonecrosis. The latest follow-up at the age of 6 years showed a right knee valgus due to asymmetrical growth arrest of the proximal tibia. PF and its complications are challenging to treat and may require a multidisciplinary approach to improve patient's functional ability.
  12. Yong SW, Law SH, Ibrahim S, Mohamad WNW
    Environ Sci Pollut Res Int, 2023 Feb;30(8):20849-20861.
    PMID: 36260231 DOI: 10.1007/s11356-022-23615-3
    ICTs (information and communication technologies) have emerged as a potent new force. Digitalization, modernization, and automation of the manufacturing process are expected to facilitate ICT adoption, resulting in increased genuine environmental concerns. This research aims to examine the impact of ICTs on environmental quality and the relationship between ICTs, environmental quality, and economic growth. Dynamic panel threshold regression was employed, and the sample countries comprised 69 developing countries from 2010 to 2019. The threshold technique will identify the precise threshold value of ICTs and highlights the impacts of ICTs on the environmental quality nexus when above and below the threshold value in developing countries. Empirical evidence suggests that ICTs positively impact environmental quality (CO2) when above the ICTs threshold value. However, ICTs provide a positive but insignificant impact on environmental quality when below the ICTs threshold value of 4.699. Additionally, ICTs affect the economic growth and environmental quality nexus, with increasing economic growth resulting in a decrease in CO2 emissions in developing countries when ICTs are below the threshold value. Thus, the ICTs threshold value should be used to ensure that ICTs adoption promotes sustainable economic growth and resolves environmental degradation issues in developing nations.
  13. Munir MA, Jamal JA, Said MM, Ibrahim S, Ahmad MS
    Scientifica (Cairo), 2023;2023:5444256.
    PMID: 37051152 DOI: 10.1155/2023/5444256
    The toxicity of histamine has attracted numerous researchers to develop a method for histamine determination purposes. The Food and Drug Administration (FDA) unequivocally prohibits the consumption of histamine above 50 mg·kg-1. Thus, an innovation in histamine detection in fish has been developed in this research. The investigation of the histamine level in fish has been conducted by using an electrochemical sensor approach and producing a polymer via molecularly imprinted polymer (MIP) on a screen-printed electrode. The technique was validated by assessing the shifts in electron shifting using the cyclic voltammetry (CV) approach and electrochemical impedance spectroscopy (EIS), whereas differential pulse voltammetry (DPV) was applied to validate the sensor method. The instruments showed a linear response ranging from 1-1000 nmol·L-1, with a detection limit of MIP/SPE at 1.765 nmol·L-1 and 709 nmol·L-1 for the NIP/SPE, respectively. The sensing technique was employed to determine the histamine level in selected samples at room temperature (25°C). The outcomes of this study indicated that the validated chemical sensor allowed accurate and precise detection of fish samples and can be categorized as a simple approach. The instrument is inexpensive and suitable for on-site detection.
  14. Yuandani, Jantan I, Haque MA, Rohani AS, Nugraha SE, Salim E, et al.
    Front Pharmacol, 2023;14:1222195.
    PMID: 37533631 DOI: 10.3389/fphar.2023.1222195
    Zingiber and Alpinia species (family: Zingiberaceae) are popularly used in food as spices and flavoring agents and in ethnomedicine to heal numerous diseases, including immune-related disorders. However, their ethnomedicinal uses have not been sufficiently supported by scientific investigations. Numerous studies on the modulating effects of plants and their bioactive compounds on the different steps of the immune system have been documented. This review aimed to highlight up-to-date research findings and critically analyze the modulatory effects and mechanisms of the extracts and secondary compounds of several Zingiber and Alpinia species, namely, Zingiber officinale Roscoe, Z. cassumunar Roxb., Z. zerumbet (L.) Roscoe ex Sm., Alpinia galanga Linn., A. conchigera Griff, A. katsumadai Hayata, A. oxyphylla Miq., A. officinarum Hance, A. zerumbet (Pers.) Burtt. et Smith, and A. purpurata (Viell.) K. Schum. on the immune system, particularly via the inflammation-related signaling pathways. The immunomodulating activities of the crude extracts of the plants have been reported, but the constituents contributing to the activities have mostly not been identified. Among the extracts, Z. officinale extracts were the most investigated for their in vitro, in vivo, and clinical effects on the immune system. Among the bioactive metabolites, 6-, 8-, and 10-gingerols, 6-shogaol, and zerumbone from Zingiber species and cardamomin, 1'-acetoxychavicol acetate, yakuchinone, rutin, 1,8-cineole, and lectin from Alpinia species have demonstrated strong immunomodulating effects. More experimental studies using cell and animal models of immune-related disorders are necessary to further understand the underlying mechanisms, together with elaborate preclinical pharmacokinetics, pharmacodynamics, bioavailability, and toxicity studies. Many of these extracts and secondary metabolites are potential candidates for clinical development in immunomodulating agents or functional foods to prevent and treat chronic inflammatory disorders.
  15. Nevara GA, Giwa Ibrahim S, Syed Muhammad SK, Zawawi N, Mustapha NA, Karim R
    Crit Rev Food Sci Nutr, 2023;63(23):6330-6343.
    PMID: 35089825 DOI: 10.1080/10408398.2022.2031092
    The excellent health benefits of oil extracted from seeds have increased its application in foods, pharmaceutical and cosmetic industries. This trend leads to a growing research area on their by-products, oilseed meals, to minimize environmental and economic issues. Examples of these by-products are soybean, peanut, kenaf seed, hemp, sesame, and chia seed meals. It is well known that soybean meals have wide applications in food and non-food industries, while other seed meals are not well established. Most oilseed meals are rich in health beneficial compounds and are potential sources of plant protein, dietary fiber, and antioxidants. Many studies have reported on the valorization of these by-products into value-added food products such as bakery and meat products to increase their nutritional and functional properties. These efforts contribute to the sustainability, development of novel functional food and support the zero-waste concept for the environment. This review aims to provide information on the composition of selected oilseed meals from soybean, peanut, hemp, kenaf, sesame and chia seeds, their potential applications in the bakery, meat, beverage, pasta, and other food products, and to highlight the issues and challenges associated with the utilization of oilseed meals into various food products.
  16. Ibrahim SF, Pickering J, Ramachandran V, Roberts KJ
    Pharm Res, 2022 Dec;39(12):3063-3078.
    PMID: 35778633 DOI: 10.1007/s11095-022-03314-x
    PURPOSE: Development of a quantitative model and associated workflow for predicting the mechanical deformation properties (plastic deformation or cleavage fracture) of organic single crystals from their crystallographic structures using molecular and crystallographic modelling.

    METHODS: Intermolecular synthons, hydrogen bonding, crystal morphology and surface chemistry are modelled using empirical force fields with the data integrated into the analysis of lattice deformation as computed using a statistical approach.

    RESULTS: The approach developed comprises three main components. Firstly, the identification of the likely direction of deformation based on lattice unit cell geometry; secondly, the identification of likely lattice planes for deformation through the calculation of the strength and stereochemistry of interplanar intermolecular interactions, surface plane rugosity and surface energy; thirdly, identification of potential crystal planes for cleavage fracture by assessing intermolecular bonding anisotropy. Pentaerythritol is predicted to fracture by brittle cleavage on the {001} lattice planes by strong in-plane hydrogen-bond interactions in the <110>, whereas pentaerythritol tetranitrate is predicted to deform by plastic deformation through the slip system {110} , with both predictions being in excellent agreement with known experimental data.

    CONCLUSION: A crystallographic framework and associated workflow for predicting the mechanical deformation of molecular crystals is developed through quantitative assessment of lattice energetics, crystal surface chemistry and crystal defects. The potential for the de novo prediction of the mechanical deformation of pharmaceutical materials using this approach is highlighted for its potential importance in the design of formulated drug products process as needed for manufacture by direct compression.

  17. Jamil K, Chew WY, Bohari NE, George S, Isahak NH, Boopalachandran B, et al.
    J Pediatr Orthop B, 2022 Mar 01;31(2):105-113.
    PMID: 34406160 DOI: 10.1097/BPB.0000000000000908
    Distinguishing physiologic and pathologic genu varus is challenging among children below age 3. They can be assessed by measuring intercondylar distance (ICD), clinical tibiofemoral angle (cTFA) or radiologic TFA (rTFA). We aim to determine the knee measurement values among three groups of children. Medline (1946-) and EMBase (1947-) were searched until 31 July 2020 using a search strategy. Studies with original data which reported knee measurements among children with normal alignment, physiologic and pathologic bowing between the ages of 0-3 years were included. In total 1897 studies were identified, and 16 studies included after title and abstract screening. These studies involved 1335 patients with normal alignment, 286 with physiologic and 184 with pathologic bowing. Five studies provided data on ICD, seven on cTFA and eight on rTFA which were pooled for meta-analyses. Normal children had neither measurable ICD nor demonstrable varus on cTFA after 19 months old. The mean (95% confidence interval) ICD for children with pathologic genu varus at 18 months was 4.41 (4.19-4.63). The rTFA for children with pathologic compared to the physiologic bowing by age groups was; 11-20 months: 24.74°(23.22°-26.26°) vs. 19.44°(17.05°-21.84°), 21-30 months: 20.35°(18.13°-22.56°) vs. 14.72°(12.32°-17.12°) and 12-36 months: 32.60°(26.40°-38.80°) vs. 19.14°(17.78°-20.50°). Children above the age of 18 months with genu varus should be closely monitored clinically using ICD or cTFA. An ICD of more than 4 cm may warrant further investigation for pathologic cause. rTFA has limited use in the detection of pathologic varus.
  18. Zakaria NZJ, Rozali S, Mubarak NM, Ibrahim S
    PMID: 35194538 DOI: 10.1007/s13399-022-02430-3
    Grown only in humid tropical conditions, the palm tree provides high-quality oil essential for cooking and personal care or biofuel in the energy sector. After the refining process, this demand could cause numerous oil palm biomass waste management problems. However, the emergence of carbon nanomaterials or CNMs could be a great way to put this waste to a good cause. The composition of the palm waste can be used as a green precursor or starting materials for synthesizing CNMs. Hence, this review paper summarizes the recent progress for the CNMs production for the past 10 years. This review paper extensively discusses the method for processing CNMs, chemical vapor deposition, pyrolysis, and microwave by the current synthesis method. The parameters and conditions of the synthesis are also analyzed. The application of the CNMs from palm oil and future recommendations are also highlighted. Generally, this paper could be a handy guide in assisting the researchers in exploring economic yet simple procedures in synthesizing carbon-based nanostructured materials derived from palm oil that can fulfill the required applications.
  19. Jamil K, Yahaya MY, Abd-Rasid AF, Ibrahim S, Abdul-Rashid AH
    Malays Orthop J, 2021 Jul;15(2):26-35.
    PMID: 34429819 DOI: 10.5704/MOJ.2107.005
    Introduction: The guided growth technique is an alternative to corrective osteotomy for treating angular deformities of the extremities. It has the advantage of being minimally invasive and is effective in a growing child. This study reports on the outcome of guided growth technique using a plate in correcting knee angular deformities.

    Material and Methods: We conducted a retrospective study of children with angular deformity of the knee treated by the guided growth technique from January 2010 to December 2015 in a tertiary centre. The guided growth technique was done using either the flexible titanium plate (8-plate) or the 2-hole reconstruction plate. Correction of deformity was assessed on radiographs by evaluating the mechanical axis deviation and tibiofemoral angle. The implants were removed once deformity correction was achieved.

    Results: A total of 17 patients (27 knees) were evaluated. Twenty-two knees (81.5%) achieved complete correction of the deformity. The median age was 4.0 (interquartile range 3.0-6.0) years and the median Body Mass Index (BMI) was 26.0 (25.0-28.0). There were 7 unilateral and 10 bilateral deformities with different pathologies (14 tibia vara, 3 genu valgus). The median rate of correction was 0.71° per month. One patient (1 knee) had screw pull-out and two patients (4 knees) had broken screws in the proximal tibia. Three patients (5 knees) failed to achieve complete correction and were subsequently treated with corrective osteotomies. Out of five patients (8 knees) who were followed-up for at least 12 months after removal of hardware, two had rebound deformities. No permanent growth retardation occurred in our patients.

    Conclusion: Our outcome for guided growth to correct knee angular deformity was similar to other studies. Guided growth is safe to perform in children below 12 years old and has good outcome in idiopathic genu valgus and Langeskiold II for tibia vara. Patients should be observed for recurrence until skeletal maturity following implant removal.

  20. Mohamed-Zain NA, Jamil K, Penafort R, Singh A, Ibrahim S, Abdul-Rashid AH
    Malays Orthop J, 2021 Jul;15(2):122-128.
    PMID: 34429832 DOI: 10.5704/MOJ.2107.018
    Introduction: To compare the anxiety levels demonstrated by children during cast removal procedure between oscillating saw vs cast shear methods.

    Material and methods: A randomised prospective study of 102 children (mean age 8.3 ± 3.5 years) with fractures involving upper or lower limbs. Children undergoing removal of cast were divided into 2 groups; either by an oscillating saw or a cast cutting shear. The level of anxiety was assessed by recording the heart rate with a portable fingertip pulse oximeter before, during and after removal of the cast. Objective assessment was performed by documenting the fear level on Children's Fear Scale (CFS).

    Results: There was a significant increase in the heart rate of children during cast removal while using the oscillating saw compared to cast shear (p<0.05). The noise level produced by the saw exceeded 80 dB (mean 103.3 dB). The fear level was significantly lower in the cast shear group (p<0.05).

    Conclusion: The noise produced by the oscillating saw was associated with an increased anxiety level in children undergoing cast removal. Cast shear is a simple and inexpensive instrument that can be used for cast removal in overly anxious children.

Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links