Displaying publications 1 - 20 of 37 in total

Abstract:
Sort:
  1. Synthesis, characterization, monoamine oxidase inhibition, molecular docking and dynamic simulations of novel 2,1-benzothiazine-2,2-dioxide derivatives
    Ahmad S, Zaib S, Jalil S, Shafiq M, Ahmad M, Sultan S, et al.
    Bioorg Chem, 2018 10;80:498-510.
    PMID: 29996111 DOI: 10.1016/j.bioorg.2018.04.012
    In this research work, we report the synthesis and biological evaluation of two new series of 1-benzyl-4-(benzylidenehydrazono)-3,4-dihydro-1H-benzo[c] [1,2]thiazine 2,2-dioxides and 1-benzyl-4-((1-phenylethylidene)hydrazono)-3,4-dihydro-1H-benzo[c][1,2]thiazine 2,2-dioxides. The synthetic plan involves the mesylation of methyl anthranilate with subsequent N-benzylation of the product. The methyl 2-(N-benzylmethylsulfonamido)benzoate was subjected to cyclization reaction in the presence of sodium hydride to obtain 1-benzyl-1H-benzo[c][1,2]thiazin-4(3H)-one 2,2-dioxide which was treated with hydrazine hydrate to get corresponding hydrazone precursor. Finally, the titled compounds were obtained by reaction of hydrazone with various substituted aldehydes and ketones. The synthesized derivatives were subjected to carry out their inhibition activities against monoamine oxidases along with modelling investigations to evaluate their binding interactions and dynamic stability during the docking studies. The inhibition profile of potent compounds was found as competitive for both the isozymes. The compounds were more selective inhibitors of MAO-A as compared to MAO-B. Moreover, drug likeness profile of the derivatives was evaluated to have an additional insight into the physicochemical properties. The molecular dynamic simulations predicted the behaviour of amino acids with the active site residues.
  2. Synthesis, X-ray crystal and monoamine oxidase inhibitory activity of 4,6-dihydrobenzo[c]pyrano[2,3-e][1,2]thiazine 5,5-dioxides: In vitro studies and docking analysis
    Ahmad S, Jalil S, Zaib S, Aslam S, Ahmad M, Rasul A, et al.
    Eur J Pharm Sci, 2019 Apr 01;131:9-22.
    PMID: 30735822 DOI: 10.1016/j.ejps.2019.02.007
    We report the synthesis and biological evaluation of two new series of 2-amino-6-benzyl-4-phenyl-4,6-dihydrobenzo[c]pyrano[2,3-e][1,2]thiazine-3‑carbonitrile 5,5-dioxides and 2-amino-6-methyl-4-phenyl-4,6-dihydrobenzo[c]pyrano[2,3-e][1,2]thiazine-3‑carbonitrile 5,5-dioxides. The synthetic methodology involves a multistep reaction starting with methyl anthranilate which was coupled with methane sulfonyl chloride. The product of the reaction was subjected to N-benzylation and N-methylation reactions followed by ring closure with sodium hydride resulting in the formation of respective 2,1-benzothiazine 2,2-dioxides. These 2,1-benzothiazine precursors were subjected to multicomponent reaction with malononitrile and substituted benzaldehydes for the synthesis of two new series of pyranobenzothiazines (6a-r and 7a-r). The synthesized compounds were screened as selective inhibitors of monoamine oxidase A and monoamine oxidase B. The in vitro results suggested that compound 6d and 7q are the selective inhibitors of monoamine oxidase A, however, the selective and potent inhibitors of monoamine oxidase B included compounds 6h and 7r. Moreover, some dual inhibitors were noticed like 7l having more inhibitory activity towards both the isozymes. Moreover, the binding modes of the selective and potent inhibitors of monoamine oxidase A and B were investigated by molecular docking analysis. The results suggested that the synthetic derivatives may be potential towards the monoamine oxidase isozymes.
  3. Performance evaluation of phosphonium based deep eutectic solvents coated cerium oxide nanoparticles for CO2 capture
    Ahmad T, Iqbal J, Bustam MA, Babar M, Tahir MB, Sagir M, et al.
    Environ Res, 2023 Apr 01;222:115314.
    PMID: 36738770 DOI: 10.1016/j.envres.2023.115314
    The critical challenge being faced by our current modern society on a global scale is to reduce the surging effects of climate change and global warming, being caused by anthropogenic emissions of CO2 in the environment. Present study reports the surface driven adsorption potential of deep eutectic solvents (DESs) surface functionalized cerium oxide nanoparticles (CeNPs) for low pressure CO2 separation. The phosphonium based DESs were prepared using tetra butyl phosphoniumbromide as hydrogen bond acceptor (HBA) and 6 acids as hydrogen bond donors (HBDs). The as-developed DESs were characterized and employed for the surface functionalization of CeNPs with their subsequent utilization in adsorption-based CO2 adsorption. The synthesis of as-prepared DESs was confirmed through FTIR measurements and absence of precipitates, revealed through visual observations. It was found that DES6 surface functionalized CeNPs demonstrated 27% higher adsorption performance for CO2 capturing. On the contrary, DES3 coated CeNPs exhibited the least adsorption progress for CO2 separation. The higher adsorption performance associated with DES6 coated CeNPs was due to enhanced surface affinity with CO2 molecules that must have facilitated the mass transport characteristics and resulted an enhancement in CO2 adsorption performance. Carboxylic groups could have generated an electric field inside the pores to attract more polarizable adsorbates including CO2, are responsible for the relatively high values of CO2 adsorption. The quadruple movement of the CO2 molecules with the electron-deficient and pluralizable nature led to the enhancement of the interactive forces between the CO2 molecules and the CeNPs decorated with the carboxylic group hydrogen bond donor rich DES. The current findings may disclose the new research horizons and theoretical guidance for reduction in the environmental effects associated with uncontrolled CO2 emission via employing DES surface coated potential CeNPs.
  4. Antidiabetic activities of chloroform fraction of Anthocleista vogelii Planch root bark in rats with diet- and alloxan-induced obesity-diabetes
    Anyanwu GO, Iqbal J, Khan SU, Zaib S, Rauf K, Onyeneke CE, et al.
    J Ethnopharmacol, 2018 Oct 18.
    PMID: 30342966 DOI: 10.1016/j.jep.2018.10.021
    ETHNOPHARMACOLOGICAL RELEVANCE: Anthocleista vogelii Planch is a medicinal plant traditionally used in West Africa for the management and treatment of diabetes mellitus.

    AIM OF THE STUDY: To determine the antidiabetic activities of chloroform fraction (CF) of Anthocleista vogelii Planch root bark in rats with diet- and alloxan-induced obesity-diabetes.

    MATERIALS AND METHODS: Inhibitory activities of CF against α-amylase and α-glucosidase activities were determined in vitro. Three weeks old rats were fed with high-fat diet for 9 weeks to induce obesity prior to further induction of diabetes using alloxan (150mg/kg body weight, i.p.). Blood glucose levels and body weight were measured every 7 days throughout the experiment. Glucose tolerance was assessed in normal and CF-treated rats on day 21. Terminal blood samples were collected from sacrificed animals for the measurement of serum insulin levels. Pancreases were excised from treated and untreated animals for histopathological examination.

    RESULTS: LCMS/MS chromatographic profile of CF via positive and negative modes revealed 13 and 23 compounds respectively. Further analysis revealed quebrachitol (QCT), loganin, sweroside, oleoside 11-methyl ester and ferulic acid, which have been previously reported for their antidiabetic activities, as constituents of CF. CF inhibited activities of α-amylase (IC50 = 51.60 ± 0.92µg/ml) and α-glucosidase (IC50 = 5.86 ± 0.97µg/ml) in a dose-dependent manner. Treatment of animals with obesity-diabetes with 100 and 200mg/kg CF significantly improved glucose tolerance (P<0.001) and enhanced serum insulin levels (P<0.05) compared to diabetic control rats.

    CONCLUSIONS: Antidiabetic activities of CF might be mediated via inhibition of α-amylase and α-glucosidase activities, elevation of serum insulin concentration, and enhancement of insulin and leptin sensitivity in obesity-diabetes rats. This study further substantiates the traditional use of A. vogelii in the management and treatment of diabetes in Africa and encourages further studies to investigate its mechanism of action.

  5. Fabrication and dialysis performance of functionalized multiwall carbon nanotubes integrated cellulose acetate/poly(vinylpyrrolidone) membranes
    Ashraf MA, Islam A, Butt MA, Hussain T, Khan RU, Bashir S, et al.
    Int J Biol Macromol, 2021 Nov 30;191:872-880.
    PMID: 34571131 DOI: 10.1016/j.ijbiomac.2021.09.131
    Mixed matrix membranes (MMMs) of cellulose acetate/poly(vinylpyrrolidone) (CA/PVP) infused with acid functionalized multiwall carbon nanotubes (f-MWCNTs) were fabricated by an immersion phase separation technique for hemodialysis application. Membranes were characterized using FTIR, water uptake, contact angle, TGA, DMA and SEM analysis. The FTIR was used to confirm the bonding interaction between CA/PVP membrane matrix and f-MWCNTs. Upon addition of f-MWCNTs, TGA thermograms and glass transition temperature indicated improved thermal stability of MMMs. The surface morphological analysis demonstrated revealed uniform distribution of f-MWCNTs and asymmetric membrane structure. The water uptake and contact angle confirmed that hydrophilicity was increased after incorporation of f-MWCNTs. The membranes demonstrated enhancement in water permeate flux, bovine serum albumin (BSA) rejection with the infusion of f-MWCNTs; whereas BSA based anti-fouling analysis using flux recovery ratio test shown up to 8.4% improvement. The urea and creatinine clearance performance of MMMs were evaluated by dialysis experiment. It has been found that f-MWCNTs integrated membranes demonstrated the higher urea and creatinine clearance with increase of 12.6% and 10.5% in comparison to the neat CA/PVP membrane. Thus, the prepared CA/PVP membranes embedded with f-MWCNTs can be employed for wide range of dialysis applications.
  6. Fulltext Fundamental Concepts of Hydrogels: Synthesis, Properties, and Their Applications
    Bashir S, Hina M, Iqbal J, Rajpar AH, Mujtaba MA, Alghamdi NA, et al.
    Polymers (Basel), 2020 Nov 16;12(11).
    PMID: 33207715 DOI: 10.3390/polym12112702
    In the present review, we focused on the fundamental concepts of hydrogels-classification, the polymers involved, synthesis methods, types of hydrogels, properties, and applications of the hydrogel. Hydrogels can be synthesized from natural polymers, synthetic polymers, polymerizable synthetic monomers, and a combination of natural and synthetic polymers. Synthesis of hydrogels involves physical, chemical, and hybrid bonding. The bonding is formed via different routes, such as solution casting, solution mixing, bulk polymerization, free radical mechanism, radiation method, and interpenetrating network formation. The synthesized hydrogels have significant properties, such as mechanical strength, biocompatibility, biodegradability, swellability, and stimuli sensitivity. These properties are substantial for electrochemical and biomedical applications. Furthermore, this review emphasizes flexible and self-healable hydrogels as electrolytes for energy storage and energy conversion applications. Insufficient adhesiveness (less interfacial interaction) between electrodes and electrolytes and mechanical strength pose serious challenges, such as delamination of the supercapacitors, batteries, and solar cells. Owing to smart and aqueous hydrogels, robust mechanical strength, adhesiveness, stretchability, strain sensitivity, and self-healability are the critical factors that can identify the reliability and robustness of the energy storage and conversion devices. These devices are highly efficient and convenient for smart, light-weight, foldable electronics and modern pollution-free transportation in the current decade.
  7. Fulltext X-Linked Gusher Disease DFNX2 in Children, a Rare Inner Ear Dysplasia with Mixed Hearing and Vestibular Loss
    Dasgupta S, Hong J, Morris R, Iqbal J, Lennox-Bowley A, Saniasiaya J
    Audiol Res, 2023 Aug 04;13(4):600-614.
    PMID: 37622928 DOI: 10.3390/audiolres13040052
    Conductive hearing losses are typically present in disorders of the external/middle ear. However, there is a rare group of inner ear conditions called third windows that can also generate a conductive hearing loss. This is due to an abnormal connection between the middle and the inner ear or between the inner ear and the cranial cavity. X-linked gusher disorder is an extremely rare congenital inner ear dysplastic syndrome with an abnormal connection due to a characteristic incomplete cochlear partition type III and an incomplete internal auditory meatus fundus. The disorder is inherited in an X-linked fashion due to the mutation of the POU3F4 gene. We present two siblings diagnosed with the condition and their long-term follow-ups. They both presented audiovestibular symptoms and showed progressive mixed losses and bilateral vestibular weakness. They were treated with cochlear implant, digital amplification and with vestibular rehabilitation. Significant others around them were involved in their journey with the medical team, and in both, a very favourable outcome was achieved. This is the first time that we have reported evolving audiovestibular function with vestibular quantification in X-linked gusher disorder and emphasize on the multidisciplinary holistic approach to manage these children effectively.
  8. Ten-year survival in women with primary stage IV breast cancer
    Eng LG, Dawood S, Sopik V, Haaland B, Tan PS, Bhoo-Pathy N, et al.
    Breast Cancer Res Treat, 2016 11;160(1):145-152.
    PMID: 27628191
    PURPOSE: To evaluate breast cancer-specific survival at 10 years in patients who present with primary stage IV breast cancer, and to determine whether survival varies with age of diagnosis.

    METHODS: We retrieved the records of 25,323 women diagnosed with primary stage IV breast cancer in the surveillance, epidemiology, and end results 18 registries database from 1990 to 2012. For each case, we extracted information on age at diagnosis, tumour size, nodal status, oestrogen receptor status, progesterone receptor status, ethnicity, cause of death and date of death. The Cox proportional hazards model was used to estimate the unadjusted and adjusted hazard ratio (HR) of death due to stage IV breast cancer, according to age group.

    RESULTS: Among 25,323 women with stage IV breast cancer, 2542 (10.0 %) were diagnosed at age 40 or below, 5562 (22.0 %) were diagnosed between ages 41 and 50 and 17,219 (68.0 %) were diagnosed between ages 51 and 70. After a mean follow-up of 2.2 years, 16,387 (64.7 %) women died of breast cancer (median survival 2.3 years). The ten-year actuarial breast cancer-specific survival rate was 15.7 % for women ages 40 and below, 14.9 % for women ages 41-50 and 11.7 % for women ages 51 to 70 (p 

  9. Fulltext Innovation in Chinese internet companies: A meta-frontier analysis
    Hafeez S, Arshad NI, Rahim LBAB, Shabbir MF, Iqbal J
    PLoS One, 2020;15(5):e0233278.
    PMID: 32437383 DOI: 10.1371/journal.pone.0233278
    The innovation of a particular company benefits the whole industry when innovation technology transfers to others. Similarly, the development and innovation in internet companies influence the development and innovation of the industry. This investigation has applied a unique approach of meta-frontier analysis to estimate and analyze the innovation in internet companies in China. A unique dataset of Chinese internet companies from 2000 to 2017 has been utilized to estimate and compare the innovation over the period of study. The change in technology gap ratio (TGR) and a shift in production function have translated into innovation which was overlooked by previous studies. It is found that the production function of internet companies is moving upward in the presence of external factors such as smartphones invention, mobile internet, mobile payments, and artificial intelligence, etc. Consequently, a sudden increase in TGR is captured due to the innovation of some companies. Hence, the average TE of the industry falls caused by the increased distance of other companies form industry production function. However, the innovation advantage defused when other companies start imitating and the average TE elevates. A steady increase in the TGR index revealed that the continuous innovation-based growth of some companies lifting the production frontier upward. This provides the opportunity for other companies to imitate and provides continuous growth in the industry. This study provides a novel methodological approach to measure innovation and also provide practical implication by empirical estimation of innovation in Chinese internet companies.
  10. Fulltext Poly (Vinyl Alcohol)/Agar Hydrogel Electrolytes Based Flexible All-in-One Supercapacitors with Conducting Polyaniline/Polypyrrole Electrodes
    Hasan K, Bashir S, Subramaniam R, Kasi R, Kamran K, Iqbal J, et al.
    Polymers (Basel), 2022 Nov 07;14(21).
    PMID: 36365772 DOI: 10.3390/polym14214784
    The major components of supercapacitor are electrodes and electrolytes which are fabricated using various materials and methods. Hydrogel is one such material that is used in supercapacitors as electrodes and electrolytes or both. Hydrogels are usually described as a soft and porous network of polymer materials that can swell in water because of the hydrophilic nature of its polymer chains, compriseng a 3D structure. It is well known that supercapacitors possess high-power density but low energy density. For enhancing energy density of these electrochemical cells and a boost in its electrochemical performance and specific capacity, binder free conducting polymer hydrogel electrodes have gained immense attention, especially polyaniline (PANI) and polypyrrole (PPy). Therefore, in this work, chemically crosslinked PVA/Agar hydrogel electrolytes have been prepared and employed. Agar has been added in PVA since it is environmentally friendly, biodegradable, and cost-effective natural polymer. Subsequently, the binder free polyaniline/polypyrrole electrodes were grown on the PVA/Agar hydrogel electrolytes to fabricate all-in-one flexible hydrogels. The synthesized hydrogels were characterized using X-ray diffraction (XRD) analysis, Fourier transform infrared (FTIR) analysis, Field emission scanning electron microscope (FESEM) and mechanical studies. Then, the all-in-one flexible supercapacitors were fabricated using the hydrogels. The electrochemical studies such cyclic voltammetry (CV), galvanic charge discharge (GCD), and electrochemical impedance spectroscopy (EIS) studies. The fabricated all-in-one lamination free supercapacitors showed promising results and by comparing all four samples, PAP2 where 5 mL of PVA was used in combination with 3 mL of Agar and 5 mL of PANI and PPy each, exhibited the highest areal capacitance of 750.13 mF/cm2, energy density of 103.02 μWh/cm2, and 497.22 μW/cm2 power density. The cyclic stability study revealed the 149% capacity retention after 15,000 cycles.
  11. Fulltext A Novel Design and Development of a Strip-Fed Circularly Polarized Rectangular Dielectric Resonator Antenna for 5G NR Sub-6 GHz Band Applications
    Illahi U, Iqbal J, Irfan M, Ismail Sulaiman M, Khan MA, Rauf A, et al.
    Sensors (Basel), 2022 Jul 25;22(15).
    PMID: 35898037 DOI: 10.3390/s22155531
    In this article, a rectangular dielectric resonator antenna (RDRA) with circularly polarized (CP) response is presented for 5G NR (New Radio) Sub-6 GHz band applications. A uniquely shaped conformal metal feeding strip is proposed to excite the RDRA in higher-order mode for high gain utilization. By using the proposed feeding mechanism, the degenerate mode pair of the first higher-order, i.e., TEδ13x at 4.13 GHz and TE1δ3y, at 4.52 GHz is excited to achieve a circularly polarized response. A circular polarization over a bandwidth of ~10%, in conjunction with a wide impedance matching over a bandwidth of ~17%, were attained by the antenna. The CP antenna proposed offers a useful gain of ~6.2 dBic. The achieved CP bandwidth of the RDRA is good enough to cover the targeted 5G NR bands around 4.4−4.8 GHz, such as n79. The proposed antenna configuration is modelled and optimized using computer simulation technology (CST). A prototype was built to confirm (validate) the performance estimated through simulation. A good agreement was observed between simulated and measured results.
  12. Ionic liquid as a potential solvent for preparation of collagen-alginate-hydroxyapatite beads as bone filler
    Iqbal B, Sarfaraz Z, Muhammad N, Ahmad P, Iqbal J, Khan ZUH, et al.
    J Biomater Sci Polym Ed, 2018 07;29(10):1168-1184.
    PMID: 29460709 DOI: 10.1080/09205063.2018.1443604
    In this study, collagen/alginate/hydroxyapatite beads having different proportions were prepared as bone fillers for the restoration of osteological defects. Ionic liquid was used to dissolve the collagen and subsequently the solution was mixed with sodium alginate solution. Hydroxyapatite was added in different proportions, with the rationale to enhance mechanical as well as biological properties. The prepared solutions were given characteristic bead shapes by dropwise addition into calcium chloride solution. The prepared beads were characterized using FTIR, XRD, TGA and SEM analysis. Microhardness testing was used to evaluate the mechanical properties. The prepared beads were investigated for water adsorption behavior to ascertain its ability for body fluid uptake and adjusted accordingly to the bone cavity. Drug loading and subsequently the antibacterial activity was investigated for the prepared beads. The biocompatibility was assessed using the hemolysis testing and cell proliferation assay. The prepared collagen-alginate-HA beads, having biocompatibility and good mechanical properties, have showed an option of promising biologically active bone fillers for bone regeneration.
  13. Fulltext Cobalt Oxide Nanograins and Silver Nanoparticles Decorated Fibrous Polyaniline Nanocomposite as Battery-Type Electrode for High Performance Supercapattery
    Iqbal J, Numan A, Omaish Ansari M, Jafer R, Jagadish PR, Bashir S, et al.
    Polymers (Basel), 2020 Nov 27;12(12).
    PMID: 33261072 DOI: 10.3390/polym12122816
    In this study, silver (Ag) and cobalt oxide (Co3O4) decorated polyaniline (PANI) fibers were prepared by the combination of in-situ aniline oxidative polymerization and the hydrothermal methodology. The morphology of the prepared Ag/Co3O4@PANI ternary nanocomposite was studied by scanning electron microscopy and transmission electron microscopy, while the structural studies were carried out by X-ray diffraction and X-ray photoelectron spectroscopy. The morphological characterization revealed fibrous shaped PANI, coated with Ag and Co3O4 nanograins, while the structural studies revealed high purity, good crystallinity, and slight interactions among the constituents of the Ag/Co3O4@PANI ternary nanocomposite. The electrochemical performance studies revealed the enhanced performance of the Ag/Co3O4@PANI nanocomposite due to the synergistic/additional effect of Ag, Co3O4 and PANI compared to pure PANI and Co3O4@PANI. The addition of the Ag and Co3O4 provided an extended site for faradaic reactions leading to the high specific capacity. The Ag/Co3O4@PANI ternary nanocomposite exhibited an excellent specific capacity of 262.62 C g-1 at a scan rate of 3 mV s-1. The maximum energy and power density were found to be 14.01 Wh kg-1 and 165.00 W kg-1, respectively. The cyclic stability of supercapattery (Ag/Co3O4@PANI//activated carbon) consisting of a battery type electrode demonstrated a gradual increase in specific capacity with a continuous charge-discharge cycle until ~1000 cycles, then remained stable until 2500 cycles and later started decreasing, thereby showing the cyclic stability of 121.03% of its initial value after 3500 cycles.
  14. Fulltext Hydrothermally Assisted Synthesis of Porous Polyaniline@Carbon Nanotubes-Manganese Dioxide Ternary Composite for Potential Application in Supercapattery
    Iqbal J, Ansari MO, Numan A, Wageh S, Al-Ghamdi A, Alam MG, et al.
    Polymers (Basel), 2020 Dec 05;12(12).
    PMID: 33291451 DOI: 10.3390/polym12122918
    In this study, ternary composites of polyaniline (PANI) with manganese dioxide (MnO2) nanorods and carbon nanotubes (CNTs) were prepared by employing a hydrothermal methodology and in-situ oxidative polymerization of aniline. The morphological analysis by scanning electron microscopy showed that the MnO2 possessed nanorod like structures in its pristine form, while in the ternary PANI@CNT/MnO2 composite, coating of PANI over CNT/MnO2, rods/tubes were evidently seen. The structural analysis by X-ray diffraction and X-ray photoelectron spectroscopy showed peaks corresponding to MnO2, PANI and CNT, which suggested efficacy of the synthesis methodology. The electrochemical performance in contrast to individual components revealed the enhanced performance of PANI@CNT/MnO2 composite due to the synergistic/additional effect of PANI, CNT and MnO2 compared to pure MnO2, PANI and PANI@CNT. The PANI@CNT/MnO2 ternary composite exhibited an excellent specific capacity of 143.26 C g-1 at a scan rate of 3 mV s-1. The cyclic stability of the supercapattery (PANI@CNT/MnO2/activated carbon)-consisting of a battery type electrode-demonstrated a gradual increase in specific capacity with continuous charge-discharge over ~1000 cycles and showed a cyclic stability of 119% compared to its initial value after 3500 cycles.
  15. BSA Binding, molecular docking and in vitro biological screening of some new 1, 2, 4-triazole heterocycles bearing azinane nucleus
    Iqbal J, Rehman A, Abbasi MA, Siddiqui SZ, Khalid H, Laulloo SJ, et al.
    Pak J Pharm Sci, 2020 Jan;33(1):149-160.
    PMID: 32122843
    A series of new compounds (5a-q), derived from 5-(1-(4-nitrophenylsulfonyl) piperidin-4-yl)-4-phenyl-4H-1,2,4-triazole-3-thiol (3) were proficiently synthesized to evaluate their biological activities. 1-(4-Nitrophenylsulfonyl) piperidine-4-carbohydrazide (2) was refluxed with phenylisothiocyanate to yield an adduct which was cyclized to compound 3 by reflux reaction with 10 % potassium hydroxide. The targeted compounds 5a-q, were synthesized by stirring alkyl/aralkyl halides (4a-q) and compound 3 in a polar aprotic solvent. 1H-NMR, 13C-NMR, EI-MS and IR spectral techniques were employed to confirm the structures of all the synthesized compounds. The compounds were biologically evaluated for BSA binding studies followed by anti-bacterial, anti-inflammatory and acetylcholinesterase (AChE) activities. The active sites responsible for the best AChE inhibition were identified through molecular docking studies. Compound 5e bearing 4-chlorobenzyl moiety found most active antibacterial and anti-inflammatory agent among the synthesized compounds. The whole library of synthesized compounds except compounds 5d and 5f was found highly active for AChE inhibition and recommended for in vivo studies so that their therapeutic applications may come in utilization.
  16. Fulltext Requirements engineering issues causing software development outsourcing failure
    Iqbal J, Ahmad RB, Khan M, Fazal-E-Amin, Alyahya S, Nizam Nasir MH, et al.
    PLoS One, 2020;15(4):e0229785.
    PMID: 32271783 DOI: 10.1371/journal.pone.0229785
    Software development outsourcing is becoming more and more famous because of the advantages like cost abatement, process enhancement, and coping with the scarcity of needed resources. Studies confirm that unfortunately a large proportion of the software development outsourcing projects fails to realize anticipated benefits. Investigations into the failures of such projects divulge that in several cases software development outsourcing projects are failed because of the issues that are associated with requirements engineering process. The objective of this study is the identification and the ranking of the commonly occurring issues of the requirements engineering process in the case of software development outsourcing. For this purpose, contemporary literature has been assessed rigorously, issues faced by practitioners have been identified and three questionnaire surveys have been organized by involving experienced software development outsourcing practitioners. The Delphi technique, cut-off value method and 50% rule have also been employed. The study explores 150 issues (129 issues from literature and 21 from industry) of requirements engineering process for software development outsourcing, groups the 150 issues into 7 identified categories and then extricates 43 customarily or commonly arising issues from the 150 issues. Founded on 'frequency of occurrence' the 43 customarily arising issues have been ranked with respect to respective categories (category-wise ranking) and with respect to all the categories (overall ranking). Categories of the customarily arising issues have also been ranked. The issues' identification and ranking contribute to design proactive software project management plan for dealing with software development outsourcing failures and attaining conjectured benefits of the software development outsourcing.
  17. Ultrasonication-assisted synthesis of novel strontium based mixed phase structures for supercapattery devices
    Iqbal MZ, Khan A, Numan A, Haider SS, Iqbal J
    Ultrason Sonochem, 2019 Dec;59:104736.
    PMID: 31473424 DOI: 10.1016/j.ultsonch.2019.104736
    An upsurge in sustainable energy demands has ultimately made supercapattery one of the important choice for energy storage, owing to highly advantageous energy density and long life span. In this work, novel strontium based mixed phased nanostructures were synthesized by using probe sonicator with sonication power 500 W at frequency of 20 kHz. The synthesized material was subsequently calcined at different temperature ranging from 200 to 800 °C. Structural and morphological analysis of the synthesized materials reveals the formation of mixed particle and rod like nanostructures with multiple crystal phases of strontium oxides and carbonates. Crystallinity, grain size and morphology of grown nanomaterials significantly improved with the increase of calcination temperature due to sufficient particle growth and low agglomeration. The electrochemical performance analysis confirms the redox activeness of the Sr-based electrode materials. Material calcined at 600 °C show high specific capacitance of 350 F g-1 and specific capacity of 175 C g-1 at current density of 0.3 A g-1 due to less particle agglomeration, good charge transfer and more contribution of electrochemical active sites for redox reactions. In addition, the developed supercapattery of Sr-based nanomaterials//activated carbon demonstrated high performance with maximum energy density of 21.8 Wh kg-1 and an excellent power density of 2400 W kg-1 for the lower and higher current densities. Furthermore, the supercapattery retain 87% of its capacity after continuous 3000 charge/discharge cycles. The device characteristics were further investigated by analyzing the capacitive and diffusion controlled contributions. The versatile strategy of developing mixed phased nanomaterials pave the way to synthesize other transition metal based nanomaterials with superior electrochemical performance for hybrid energy storage devices.
  18. Acridine-based (thio)semicarbazones and hydrazones: Synthesis, in vitro urease inhibition, molecular docking and in-silico ADME evaluation
    Isaac IO, Al-Rashida M, Rahman SU, Alharthy RD, Asari A, Hameed A, et al.
    Bioorg Chem, 2019 02;82:6-16.
    PMID: 30267972 DOI: 10.1016/j.bioorg.2018.09.032
    Urease is a bacterial enzyme that is responsible for virulence of various pathogenic bacteria such as Staphylococcus aureus, Proteus mirabilis, Klebsiella pneumoniae, Ureaplasma urealyticum, Helicobacter pylori and Mycobacterium tuberculosis. Increased urease activity aids in survival and colonization of pathogenic bacteria causing several disorders especially gastric ulceration. Hence, urease inhibitors are used for treatment of such diseases. In search of new molecules with better urease inhibitory activity, herein we report a series of acridine derived (thio)semicarbazones (4a-4e, 6a-6l) that were found to be active against urease enzyme. Molecular docking studies were carried out to better comprehend the preferential mode of binding of these compounds against urease enzyme. Docking against urease from pathogenic bacterium S. pasteurii was also carried out with favorable results. In silico ADME evaluation was done to determine drug likeness of synthesized compounds.
  19. Frequency and evaluation of the perceptions towards caesarean section among pregnant women attending public hospitals in Pakistan and the implications
    Ishaq R, Baloch NS, Iqbal Q, Saleem F, Hassali MA, Iqbal J, et al.
    Hosp Pract (1995), 2017 Aug;45(3):104-110.
    PMID: 28490205 DOI: 10.1080/21548331.2017.1328250
    OBJECTIVES: There is increasing prevalence of caesarean sections (CS) worldwide; however, there are concerns about their rates in some countries, including potential fears among mothers. Consequently, we aimed to determine the frequency of CS, and explore patient's perception towards CS attending public hospitals in Pakistan, to provide future guidance.

    METHODS: A two-phased study design (retrospective and cross sectional) was adopted. A retrospective study was conducted to assess the frequency of CS over one year among four public hospitals. A cross sectional study was subsequently conducted to determine patients' perception towards CS attending the four tertiary care public hospitals in Quetta city, Pakistan, which is where most births take place.

    RESULTS: Overall prevalence of CS was 13.1% across the four hospitals. 728 patients were approached and 717 responded to the survey. Although 78.8% perceived CS as dangerous, influenced by education (p = 0.004), locality (p = 0.001) and employment status (p = 0.001), 74.5% of patients were in agreement that this is the best approach to save mother's and baby's lives if needed. 62% of respondents reported they would like to avoid CS if they could due to post-operative pain, and 58.9% preferred a normal delivery. There was also a significant association with education (p = 0.001) and locality (p = 0.001) where respondents considered normal vaginal delivery as painful.

    CONCLUSION: The overall frequency of CS approximates to WHO recommendations, although there is appreciable variation among the four hospitals. When it comes to perception towards CS, women had limited information. There is a need to provide mothers with education during the antenatal period, especially those with limited education, to accept CS where needed.

  20. Fulltext Physio-chemical characterization of indigenous agricultural waste materials for the development of potting media
    Kiran S, Iqbal J, Danish S, Bakhsh A, Bukhari SIUS, Bibi F, et al.
    Saudi J Biol Sci, 2021 Dec;28(12):7491-7498.
    PMID: 34867054 DOI: 10.1016/j.sjbs.2021.08.058
    Organic residues are an important factor that directly affects fruiting tree seedlings' health at earlier stages. It provides a suitable environment for seedling growth by providing better nutrient ions, water, and aeration. However, low organic contents and high shrinkage of most organic materials mostly deteriorate ideal potting media characteristics. Low aeration, high water, and nutrients leaching decrease seedling growth and cause a significant loss of valuable resources. That is why the current study was conducted to screen out the best indigenous materials based on particle size to produce good characteristics bearing potting media. For that, eight different ingredients, i.e., "sugarcane", "coconut coir", "wheat straw", "rice straw", "corn cob", "leaf litter", "farmyard manure", and "sunflower heads" were collected. Initially, all the materials were air-dried and processes as per requirement. After grinding, three particles size (fine = < 2 mm, medium = 3 mm and coarse = 5 mm) were separated by sieving. Results showed that decreasing particle size in "rice straw", "corn cob", "farmyard manure," and "sunflower head" decreased leachate pH. Higher EC in leachates was negatively correlated with particle size in all potting media ingredients. Except for farmyard manure, fine particle size increases the water-holding ability of potting media ingredients. However, air-filled porosity was associated with a decrease in particle size of potting media in gradients. In conclusion, farmyard manure, "sunflower heads", "leaf litter" and "sugarcane" should be incorporated while making a combination for potting media. More investigations are suggested by mixing different particle size ingredients to prepare potting media.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links