Supercritical carbon dioxide (SC-CO2 ) is a non-thermal technique implemented by food, pharmaceutical, and similar industries with the aim of inhibiting the microorganisms and apply effective sterilisation. Presently, limited number of studies has reported the application of SC-CO2 on fresh chicken meat. The present work therefore aimed to reveal the microbial and physicochemical quality of the SC-CO2 -treated fresh chicken meat. The fresh chicken meat was subjected to the SC-CO2 at 14 MPa and 45°C for 40 min and was stored at 4°C for 0, 3, and 7 days. The obtained results indicated that the treatment with SC-CO2 significantly decreased the total plate count and, yeast and mould count from log10 5.90 to 2.00 CFU/g and from log10 5.02 to 2.00 CFU/g at day 7 of storage, respectively. The values of pH, cooking loss, and water holding capacity were not affected by the treatment. The results revealed that the SC-CO2 -treated samples displayed harder texture, higher lightness and yellowness, and lower redness. In addition, lipid peroxidation of SC-CO2 and control samples resulted in values of 1.9 and 0.5 MDA/mg of meat at day 7 of storage time and did not significantly change in the rest of the evaluation days. In summary, the application of SC-CO2 was capable of enhancing the microbial quality and certain physicochemical attributes. However, alteration of certain parameters of SC-CO2 might enhance the overall meat quality.
The pleasant taste of edible mushrooms, which is attributed to their high protein content, makes them an attractive source for the production of protein hydrolysates with good taste properties. In the present work, different mushroom protein hydrolysates were produced from shiitake, oyster, bunashimeji and enoki mushrooms using stem bromelain hydrolysis at 0.5% (m/m) enzyme/substrate ratio at pH=6.5 and 40 °C for 20 h. The produced liquid mushroom protein hydrolysate yielded 0.77-0.92% crude protein (p>0.05). Bunashimeji mushroom protein hydrolysate was the lightest in colour, while shiitake mushroom protein hydrolysate was the darkest (p<0.05). Enoki mushroom protein hydrolysate had the highest dry matter content. There was no significant difference in the degree of hydrolysis among different mushroom protein hydrolysates (53.52-67.13%, p>0.05), with the highest yield of bunashimeji and the lowest of shiitake mushroom protein hydrolysate (p<0.05). Preference test of chicken soup with added different mushroom protein hydrolysates was performed using 58 untrained panellists to evaluate their taste-enhancing effect, compared to monosodium glutamate (MSG). Soup with MSG had the highest score for the tested attributes, while soups with bunashimeji and oyster mushroom protein hydrolysates showed higher aroma, taste, mouthfeel and overall preference scores than negative control, which contained neither MSG nor any of the hydrolysates (p<0.05). This finding suggests that bunashimeji and oyster mushroom protein hydrolysate have the potential to be used as taste enhancers in food applications.
This work aimed to evaluate the microstructural, physicochemical and sensorial properties of buffalo meat patties produced using different mixing equipment (bowl cutter, universal mixer, and meat mixer). Scanning electron microscopy revealed a more homogenize emulsion, cohesive structure and smaller pore size of patties produced using the bowl cutter, which significantly reduced the total fluid release, water release, fat release and cooking loss as compared to the universal mixer and meat mixer. Production of the buffalo meat patties using bowl cutter also improved the moisture retention and gel strength of the patties. The patties produced using bowl cutter had the significantly highest lightness and yellowness values, while the redness was the lowest. Lower hardness, gumminess and chewiness also were observed from the patties produced using bowl cutter. Quality of the microstructural and physicochemical properties of the patties produced using different equipment can be organized as bowl cutter > universal mixer > meat mixer. Nevertheless, the sensory evaluation demonstrated a higher preference on aroma, flavour and overall acceptability of patties produced using meat mixer due to coarser and meaty texture, while the colour, tenderness, juiciness and springiness did not differ against using bowl cutter and universal mixer.
Mung bean is an inexpensive yet sustainable protein source. Current work compared the effects of freeze (FD), spray (SD) and oven drying (OD), on mung bean protein isolate (MBPI) produced on pilot scale. All samples showed no dissociation of protein subunits and were thermally stable (Td = 157.90-158.07 °C). According to morphological studies, FD formed a porous protein while SD and OD formed wrinkled and compact crystals, respectively. FD and SD formed elastic gels with better gelling capacity than OD (aggregated gel). FD showed exceptional protein solubility, water and oil absorption capacity (4.23 g/g and 8.38 g/g, respectively). SD demonstrated the smallest particle size, excellent emulsion activity index (29.21 m2/g) and stability (351.90 min) and the highest β-sheet amount (37.61%). FTIR spectra for all samples showed characteristic peaks which corresponded well to the secondary structure of legume proteins. Rheological analysis revealed that gelation temperature for all MBPI lied around 90 °C. Current work described the different final properties achieved for MBPI produced under different drying techniques that allowed tailoring for different food systems, whereby FD is ideal for meat extender, SD is suitable for meat emulsion while OD is suitable in general protein-based application.
Plant extracts are rich in various bioactive compounds exerting antioxidants effects, such as phenolics, catechins, flavonoids, quercetin, anthocyanin, tocopherol, rutin, chlorogenic acid, lycopene, caffeic acid, ferulic acid, p-coumaric acid, vitamin C, protocatechuic acid, vitamin E, carotenoids, β-carotene, myricetin, kaempferol, carnosine, zeaxanthin, sesamol, rosmarinic acid, carnosic acid, and carnosol. The extraction processing protocols such as solvent, time, temperature, and plant powder should be optimized to obtain the optimum yield with the maximum concentration of active ingredients. The application of novel green extraction technologies has improved extraction yields with a high concentration of active compounds, heat-labile compounds at a lower environmental cost, in a short duration, and with efficient utilization of the solvent. The application of various combinations of extraction technologies has proved to exert a synergistic effect or to act as an adjunct. There is a need for proper identification, segregation, and purification of the active ingredients in plant extracts for their efficient utilization in the meat industry, as natural antioxidants. The present review has critically analyzed the conventional and green extraction technologies in extracting bioactive compounds from plant biomass and their utilization in meat as natural antioxidants.
Meat spoilage caused by temperature abuse is a major problem for producers, retailers, and consumers that can generate large economic losses to industries. Microbial growth of Pseudomonas spp. is the main source of spoilage during storage. Cinnamon has antimicrobial properties that may potentially be used to reduce the spoilage caused by Pseudomonas. The objectives of this study were to determine the inhibitory effect of cinnamon extract (CE) against Pseudomonas aeruginosa (ATCC 27853) and evaluate the treatment of CE on meat quality during different storage temperatures (5 °C, 10 °C, 15 °C, and 25 °C). The anti-Pseudomonas result showed that 100% (w/v) CE concentration produced a 13.50 mm zone of inhibition in a disc diffusion assay. The minimum inhibitor concentration (MIC) of CE was noted at 25% (v/v), whereas the minimum bactericidal concentration (MBC) value was observed at 50% (v/v) concentration of CE. The time-kill showed the growth of P. aeruginosa decreased from 7.64 to 5.39 log CFU/mL at MIC concentration. Total phenolic content and IC50 value of the cinnamon extract was expressed as 6.72 ± 0.87 mg GAE/g extract and 0.15 mg/mL, respectively. When the meat was marinated with 50% (v/v) CE and stored at various temperatures, the total viable count (TVC) and growth of Pseudomonas spp. were lowered as compared to the control sample. However, the reduction in microbial count in all samples was influenced by the storage temperature, where the lowered microbial count was noted in the sample treated with CE and stored at 5 and 10 °C for 48 h. The pH of meat treated with or without CE ranged from pH 5.74 to 6.48. The sensory attributes of colour, texture, and overall acceptability have a significant difference, except for odour, between marinated meat and control. The results indicate that the use of cinnamon extract as the marination agent for meat could reduce the growth of Pseudomonas spp. and therefore assist in extending the shelf life of meat at 5 and 10 °C storage temperatures.
The butterfly pea flower (Clitoria ternatea L.) (BPF) has a high anthocyanin content, which can be incorporated into polymer-based films to produce intelligent packaging for real-time food freshness indicators. The objective of this work was to systematically review the polymer characteristics used as BPF extract carriers and their application on various food products as intelligent packaging systems. This systematic review was developed based on scientific reports accessible on the databases provided by PSAS, UPM, and Google Scholar between 2010 and 2023. It covers the morphology, anthocyanin extraction, and applications of anthocyanin-rich colourants from butterfly pea flower (BPF) and as pH indicators in intelligent packaging systems. Probe ultrasonication extraction was successfully employed to extract a higher yield, which showed a 246.48% better extraction of anthocyanins from BPFs for food applications. In comparison to anthocyanins from other natural sources, BPFs have a major benefit in food packaging due to their unique colour spectrum throughout a wide range of pH values. Several studies reported that the immobilisation of BPF in different polymeric film matrixes could affect their physicochemical properties, but they could still effectively monitor the quality of perishable food in real-time. In conclusion, the development of intelligent films employing BPF's anthocyanins is a potential strategy for the future of food packaging systems.
Meat is a source of essential amino acids that are necessary for human growth and development, meat can come from dead, alive, Halal, or non-Halal animal species which are intentionally or economically (adulteration) sold to consumers. Sharia has prohibited the consumption of pork by Muslims. Because of the activities of adulterators in recent times, consumers are aware of what they eat. In the past, several methods were employed for the authentication of Halal meat, but numerous drawbacks are attached to this method such as lack of flexibility, limited application, time,consumption and low level of accuracy and sensitivity. Machine Learning (ML) is the concept of learning through the development and application of algorithms from given data and making predictions or decisions without being explicitly programmed. The techniques compared with traditional methods in Halal meat authentication are fast, flexible, scaled, automated, less expensive, high accuracy and sensitivity. Some of the ML approaches used in Halal meat authentication have proven a high percentage of accuracy in meat authenticity while other approaches show no evidence of Halal meat authentication for now. The paper critically highlighted some of the principles, challenges, successes, and prospects of ML approaches in the authentication of Halal meat.
The implementation of the head-only electrical stunning procedure in poultry processing has been aimed at enhancing eating, ethical, and religious quality. However, inconsistencies in voltage and frequency standardization, along with variations in previous research outcomes, have led to numerous cases of both under-stunned and over-stunned birds. Thus, this study aimed to comprehensively evaluate the effects of varying voltages and frequencies during electrical water bath stunning on carcass quality, meat attributes, and textural properties in broiler chickens. A cohort of 240 healthy female broilers (Cobb 500, 42-days-old, 2 kg ± 0.1 kg) was meticulously selected from a commercial farm. The birds underwent exposure to different stunning voltages (2.5, 10.5, 30, and 40 V) and frequencies (50 and 300 Hz). Subsequent analyses were conducted on meat samples to assess physicochemical properties, carcass quality, and textural attributes. The findings revealed a higher incidence of petechial hemorrhage (P < 0.05) in birds stunned at 10.5 V compared to other voltage. Notably, no broken bones were recorded in birds subjected to high voltages (30 and 40 V). Low frequency (50 Hz) significantly increased the occurrence of petechial hemorrhage and simultaneously resulted in pectoralis major muscle with decreased redness (a*). Birds subjected to the 10.5 V stunning treatment exhibited a lower cooking loss percentage. Significant interactions between voltage and ageing (V × A) were observed. Birds stunned at 30 V and aged for 7 d displayed highest drip loss compared to a one-day ageing period across different voltage levels. This interaction also impacted pH values, with birds subjected to 10.5 V showing significantly lower (P < 0.05) pH at d 7 of ageing. The meat hardness was influenced by the V × A interaction, wherein birds stunned at 10.5 V exhibited lower hardness after one day of ageing compared to other voltage levels. Red wing tips, lightness (L*), adhesiveness, and resilience were also significantly impacted (P < 0.05) by the interaction between frequency and voltage. A notable 3-way interaction was observed for gumminess and chewiness (F × V × A), where the 2-way interaction between frequency and voltage (F × V) affected both parameters differently at various ageing periods. Additionally, there was a significant interaction (P < 0.05) between frequency and voltage influencing shear strength and yellowness.