This study aims to optimise the operating conditions for the supercritical fluid extraction (SFE) of toxic elements from fish oil. The SFE operating parameters of pressure, temperature, CO2 flow rate and extraction time were optimised using a central composite design (CCD) of response surface methodology (RSM). High coefficients of determination (R²) (0.897-0.988) for the predicted response surface models confirmed a satisfactory adjustment of the polynomial regression models with the operation conditions. The results showed that the linear and quadratic terms of pressure and temperature were the most significant (p < 0.05) variables affecting the overall responses. The optimum conditions for the simultaneous elimination of toxic elements comprised a pressure of 61 MPa, a temperature of 39.8ºC, a CO₂ flow rate of 3.7 ml min⁻¹ and an extraction time of 4 h. These optimised SFE conditions were able to produce fish oil with the contents of lead, cadmium, arsenic and mercury reduced by up to 98.3%, 96.1%, 94.9% and 93.7%, respectively. The fish oil extracted under the optimised SFE operating conditions was of good quality in terms of its fatty acid constituents.
Toxic elements in drinking water have great effects on human health. However, there is very limited information about toxic elements in drinking water in Afghanistan. In this study, levels of 10 elements (chromium, nickel, copper, arsenic, cadmium, antimony, barium, mercury, lead and uranium) in 227 well drinking water samples in Kabul, Afghanistan were examined for the first time. Chromium (in 0.9% of the 227 samples), arsenic (7.0%) and uranium (19.4%) exceeded the values in WHO health-based guidelines for drinking-water quality. Maximum chromium, arsenic and uranium levels in the water samples were 1.3-, 10.4- and 17.2-fold higher than the values in the guidelines, respectively. We next focused on uranium, which is the most seriously polluted element among the 10 elements. Mean ± SD (138.0 ± 1.4) of the (238)U/(235)U isotopic ratio in the water samples was in the range of previously reported ratios for natural source uranium. We then examined the effect of our originally developed magnesium (Mg)-iron (Fe)-based hydrotalcite-like compounds (MF-HT) on adsorption for uranium. All of the uranium-polluted well water samples from Kabul (mean ± SD = 190.4 ± 113.9 μg/L; n = 11) could be remediated up to 1.2 ± 1.7 μg/L by 1% weight of our MF-HT within 60 s at very low cost (<0.001 cents/day/family) in theory. Thus, we demonstrated not only elevated levels of some toxic elements including natural source uranium but also an effective depurative for uranium in well drinking water from Kabul. Since our depurative is effective for remediation of arsenic as shown in our previous studies, its practical use in Kabul may be encouraged.
Natural, inorganic arsenic contamination of groundwater threatens the health of more than 100 million people worldwide, including residents of the densely populated river deltas of South and Southeast Asia. Contaminated groundwater from tube wells in Cambodia was discovered in 2001 leading to the detection of the first cases of arsenicosis in 2006. The most affected area was the Kandal Province. The main objective of this study was to determine the prevalence of arsenicosis in Cambodia based on acceptable criteria, and to investigate the use of hair arsenic as a biomarker not only for arsenicosis-related signs but also for associated symptoms. A cross-sectional epidemiological study of 616 respondents from 3 purposely selected provinces within the Mekong River basin of Cambodia was conducted. The Kandal Province was chosen as a high arsenic-contaminated area, while the Kratie Province and Kampong Cham Province were chosen as moderate and low arsenic-contaminated areas, respectively. The most prevalent sign of arsenicosis was hypomelanosis with a prevalence of 14.5% among all respondents and 32.4% among respondents with a hair arsenic level of ≥1 μg/g. This was followed by hyperkeratosis, hyperpigmentation and mee's lines. Results also suggest a 1.0 μg/g hair arsenic level to be a practical cut off point for an indication of an arsenic contaminated individual. This hair arsenic level, together with the presence of one or more of the classical signs of arsenicosis, seems to be a practical criteria for a confirmed diagnosis. Based on these criteria, the overall prevalence of arsenicosis for all provinces was found to be 16.1%, with Kandal Province recording the highest prevalence of 35.5%. This prevalence is comparatively high when compared to that of other affected countries. The association between arsenicosis and the use of Chinese traditional medicine also needs further investigation.
Henna and walnut tree bark are widely used by Libyan women as cosmetics. They may contain lead (Pb), cadmium (Cd) and arsenic (As), which, in turn, pose a high risk to their health. This study aims to determine the levels of Pb, Cd and As in henna and walnut tree bark products sold in Libyan markets. The products were analyzed for their Pb, Cd and As content by using inductively coupled plasma mass spectrometry (ICP-MS) after a microwave acid digestion. The results showed a significant difference between the henna and walnut tree bark samples in terms of their heavy metals content (p < 0.05). The highest heavy metal concentrations were observed in the walnut tree bark samples whereas the lowest was observed in the henna samples. In addition, 60% of the henna and 90% of the walnut tree bark samples contained Pb levels and approximately 80% of the henna and 90% the walnut tree bark samples contained Cd levels, which are much higher than the tolerance limit. However, As concentrations in all the samples were lower. The results indicated that such cosmetics expose consumers to high levels of Pb and Cd and hence, to potential health risks. Thus, studying the sources and effects of heavy metals in such cosmetics is strongly recommended.
Several experimental studies on hygiene have recently been performed and fieldwork studies are also important and essential tools. However, the implementation of experimental studies is insufficient compared with that of fieldwork studies on hygiene. Here, we show our well-balanced implementation of both fieldwork and experimental studies of toxic-element-mediated diseases including skin cancer and hearing loss. Since the pollution of drinking well water by toxic elements induces various diseases including skin cancer, we performed both fieldwork and experimental studies to determine the levels of toxic elements and the mechanisms behind the development of toxic-element-related diseases and to develop a novel remediation system. Our fieldwork studies in several countries including Bangladesh, Vietnam and Malaysia demonstrated that drinking well water was polluted with high concentrations of several toxic elements including arsenic, barium, iron and manganese. Our experimental studies using the data from our fieldwork studies demonstrated that these toxic elements caused skin cancer and hearing loss. Further experimental studies resulted in the development of a novel remediation system that adsorbs toxic elements from polluted drinking water. A well-balanced implementation of both fieldwork and experimental studies is important for the prediction, prevention and therapy of toxic-element-mediated diseases.
In this article, an easy and quick method based on microwave assisted acid digestion technique prior to quantification using inductively coupled plasma mass spectrometry for the analysis of heavy metals in cocoa beans, cocoa powder and chocolate was established and validated for arsenic (As), cadmium (Cd), lead (Pb), and antimony (Sb). Limit of quantification for all elements were product dependent and varies from 7.84 to 194.52 µg/kg. The recoveries of the heavy metals at 250 and 1000 µg/kg spiking levels were ranged between 96.27-108.75%, 90.43-101.97% and 89.72-106.26% for cocoa beans, cocoa powder, and chocolate, respectively. Relative standard deviation values obtained were all below 20% and the expanded uncertainty measurements for the elements were less than 25%. The analysis of real samples found that the concentration level is far from the national alarming level except for cadmium in cocoa beans.
Water from La Pampa, Argentina, was used for washing and cooking rice to examine the in-situ impact of using naturally-contaminated water for food preparation on the elemental dietary intake. Whilst washing with the control tap water (28 μg/L As) reduced the concentration of As in rice by 23%, the use of different well waters (281-1144 μg/L) increased As levels significantly (48-227%) in comparison with the original concentration in the rice (0.056 µg/g). Cooking the rice at a low water-to-rice ratio (2:1) using modern methods increased the levels of As in the cooked samples by 2-3 orders of magnitude for both pre-washed and un-washed rice. Similar trends were observed for vanadium. Although the levels of manganese, iron, copper, zinc and molybdenum in rice were reduced during washing and cooking for most water samples, the molybdenum concentration in the cooked rice doubled (2.2-2.9 µg/g) when using water containing >1 mg/L Mo.
The trace metal concentrations in edible muscle of red tilapia (Oreochromis spp.) sampled from a former tin mining pool, concrete tank and earthen pond in Jelebu were analysed with microwave assisted digestion-inductively coupled plasma-mass spectrometry. Results were compared with established legal limits and the daily ingestion exposures simulated using the Monte Carlo algorithm for potential health risks. Among the metals investigated, arsenic was found to be the key contaminant, which may have arisen from the use of formulated feeding pellets. Although the risks of toxicity associated with consumption of red tilapia from the sites investigated were found to be within the tolerable range, the preliminary probabilistic estimation of As cancer risk shows that the 95th percentile risk level surpassed the benchmark level of 10(-5). In general, the probabilistic health risks associated with ingestion of red tilapia can be ranked as follows: former tin mining pool > concrete tank > earthen pond.
The first objective of this study was to provide data of arsenic (As) levels in Peninsular Malaysia based on soil samples and accumulation of As in Centella asiatica collected from 12 sampling sites in Peninsular Malaysia. The second objective was to assess the accumulation of As in transplanted C. asiatica between control and semi-polluted or polluted sites. Four sites were selected which were UPM (clean site), Balakong (semi-polluted site), Seri Kembangan (semi-polluted site) and Juru (polluted site). The As concentrations of plant and soil samples were determined by Instrumental Neutron Activation Analysis. The As levels ranged from 9.38 to 57.05 μg/g dw in soils, 0.21 to 4.33 μg/g dw in leaves, 0.18 to 1.83 μg/g dw in stems and 1.32-20.76 μg/g dw in roots. All sampling sites had As levels exceeding the CCME guideline (12 μg/g dw) except for Kelantan, P. Pauh, and Senawang with P. Klang having the highest As in soil (57.05 μg/g dw). In C. asiatica, As accumulation was highest in roots followed by leaves and stems. When the As level in soils were higher, the uptake of As in plants would also be increased. After the transplantation of plants to semi-polluted and polluted sites for 3 weeks, all concentration factors were greater than 50 % of the initial As level. The elimination factor was around 39 % when the plants were transplanted back to the clean sites for 3 weeks. The findings of the present study indicated that the leaves, stems and roots of C. asiatica are ideal biomonitors of As contamination. The present data results the most comprehensive data obtained on As levels in Malaysia.
As, Cd, Pb and Hg were analysed in commonly consumed spices and herbs in Malaysia. The range of As, Cd, Pb and Hg content was 0.24-2.54, 0.23-8.07, 1.54-8.94 and 0.06-0.52 µg g(-1), respectively. The highest concentration of Cd, Pb and Hg in spices and herbs exceeded the maximum permitted proportion, which are 1, 2 and 0.05 µg g(-1), respectively. This study suggests further monitoring of Cd, Pb and Hg on daily consumption of spices and herbs and its toxicological implication for consumers since only the amount of As was lower than the permitted concentration.
The drinking and mineral water samples obtained from different geographical locations had concentrations of the selected minerals lower than the standard limits, except for manganese, arsenic, and fluoride. The concentrations of manganese and arsenic in two mineral water samples were slightly higher than the standard international recommended limits. One mineral water sample had a fluoride concentration higher than the standard limits, whereas manganese was not detected in nine drinking and mineral water samples. Most of the selected minerals found in the tap water samples were below the international standard limits, except for iron and manganese. The concentrations of iron and manganese in the tap water samples were higher than the standard limits, which were obtained from one and three of the studied locations, respectively. The potable water obtained from various manufacturers and locations in Peninsular Malaysia is safe for consumption, as the minerals concentrations were below the standard limits prescribed by the Malaysian Food Regulations of 1985. The data obtained may also provide important information related to daily intake of these minerals from drinking water.
Arsenic is a common contaminant in gold mine soil and tailings. Microbes present an opportunity for bio-treatment of arsenic, since it is a sustainable and cost-effective approach to remove arsenic from water. However, the development of existing bio-treatment approaches depends on isolation of arsenic-resistant microbes from arsenic contaminated samples. Microbial cultures are commonly used in bio-treatment; however, it is not established whether the structure of the cultured isolates resembles the native microbial community from arsenic-contaminated soil. In this milieu, a culture-independent approach using Illumina sequencing technology was used to profile the microbial community in situ. This was coupled with a culture-dependent technique, that is, isolation using two different growth media, to analyse the microbial population in arsenic laden tailing dam sludge based on the culture-independent sequencing approach, 4 phyla and 8 genera were identified in a sample from the arsenic-rich gold mine. Firmicutes (92.23%) was the dominant phylum, followed by Proteobacteria (3.21%), Actinobacteria (2.41%), and Bacteroidetes (1.49%). The identified genera included Staphylococcus (89.8%), Pseudomonas (1.25), Corynebacterium (0.82), Prevotella (0.54%), Megamonas (0.38%) and Sphingomonas (0.36%). The Shannon index value (3.05) and Simpson index value (0.1661) indicated low diversity in arsenic laden tailing. The culture dependent method exposed significant similarities with culture independent methods at the phylum level with Firmicutes, Proteobacteria and Actinobacteria, being common, and Firmicutes was the dominant phylum whereas, at the genus level, only Pseudomonas was presented by both methods. It showed high similarities between culture independent and dependent methods at the phylum level and large differences at the genus level, highlighting the complementarity between the two methods for identification of the native population bacteria in arsenic-rich mine. As a result, the present study can be a resource on microbes for bio-treatment of arsenic in mining waste.
Concentrations of heavy metals were determined in the water column (including the sea-surface microlayer, subsurface, mid-depth and bottom water) and sediments from Singapore's coastal environment. The concentration ranges for As, Cd, Cr, Cu, Ni, Pb and Zn in the seawater dissolved phase (DP) were 0.34-2.04, 0.013-0.109, 0.07-0.35, 0.23-1.16, 0.28-0.78, 0.009-0.062 and 0.97-3.66 microg L(-1) respectively. The ranges for Cd, Cr, Cu, Ni, Pb and Zn in the suspended particulate matter (SPM) were 0.16-0.73, 6.72-53.93, 12.87-118.29, 4.34-60.71, 1.10-6.08 and 43.09-370.49 microg g(-1), respectively. Heavy metal concentrations in sediments ranged between 0.054-0.217, 37.48-50.52, 6.30-21.01, 13.27-26.59, 24.14-37.28 and 48.20-62.36 microg g(-1) for Cd, Cr, Cu, Ni, Pb and Zn, respectively. The lowest concentrations of metals in the DP and SPM were most frequently found in the subsurface water while the highest concentrations were mostly observed in the SML and bottom water. Overall, heavy metals in both the dissolved and particulate fractions have depth profiles that show a decreasing trend of concentrations from the subsurface to the bottom water, indicating that the prevalence of metals is linked to the marine biological cycle. In comparison to data from Greece, Malaysia and USA, the levels of metals in the DP are considered to be low in Singapore. Higher concentrations of particulate metals were reported for the Northern Adriatic Sea and the Rhine/Meuse estuary in the Netherlands compared to values reported in this study. The marine sediments in Singapore are not heavily contaminated when compared to metal levels in marine sediments from other countries such as Thailand, Japan, Korea, Spain and China.
The composition of heavy metals (and metalloid) in surface soils of iron ore mine-impacted areas has been evaluated of their potential ecological and human health risks. The mining areas included seven selected locations in the vicinity of active and abandoned iron ore-mining sites in Pahang, Malaysia. Heavy metals such as Fe, Mn, Cu, Zn, Co, Pb, Cr, Ni, and Cd and metalloid As were present in the mining soils of the studied area, while Cu was found exceeding the soil guideline value at all sampling locations. However, the assessment of the potential ecological risk index (RI) indicated low ecological risk (RI between 44 and 128) with respect to Cd, Pb, Cu, As, Zn, Co, and Ni in the surface soils. Contributions of potential ecological risk [Formula: see text]by metal elements to the total potential ecological RI were evident for Cd, As, Pb, and Cu. Contribution of Cu appears to be consistently greater in the abandoned mining area compared to active iron ore-mining site. For non-carcinogenic risk, no significant potential health risk was found to both children and adults as the hazard indices (HIs) were all below than 1. The lifetime cancer risk (LCR) indicated that As has greater potential carcinogenic risk compared to other metals that may induce carcinogenic effects such as Pb, Cr, and Cd, while the LCR of As for children fell within tolerable range for regulatory purposes. Irrespective of carcinogenic or non-carcinogenic risk, greater potential health risk was found among children (by an order of magnitude higher for most metals) compared to adults. The hazard quotient (HQ) and cancer risk indicated that the pathways for the risk to occur were found to be in the order of ingestion > dermal > inhalation. Overall, findings showed that some metals and metalloid were still present at comparable concentrations even long after cessation of the iron ore-mining activities.
This study investigated the contamination levels and sources of As and Cd vicinity area from Nui Phao mine that is one of the largest tungsten (W) open pit mines in the world. Soil and plant samples were collected from the study area to identify the concentrations of As and Cd using aqua-regia or HNO3 digestion. According to the Vietnamese agricultural soil criteria, all soil samples were contaminated with As and Cd. The distribution of As concentration is related to the distance from the Nui Phao mine. The higher As concentrations were measured in the area close to the mine. However, the Cd distribution in the soil showed a different pattern from As. Enrichment factor and Geoaccumulation Index (Igeo) indicated that As in the soil is derived from the mining activities, while Cd could have other geogenic or anthropogenic sources. The ranges of As and Cd concentration in polished rice grains in the Nui Phao mine area exceeded the CODEX criteria (0.2 mg/kg), which indicated extreme contamination. The arsenic concentration between soil and plant samples was determined to be a positive correlation, while the Cd concentration showed a negative correlation, implying that As and Cd have different geochemical behavior based on their sources.
Metal contaminations in commercial fish have become a great public health concern worldwide including Bangladesh. The current study was conducted to provide preliminary evidence of nine metals in three commercially significant fish namely Pampus argenteus, Sardinella longiceps and Tenualosa ilisha collected from four coastal stations- Kuakata, Pathorghata, Cox's Bazar, and Pirojpur, and eight stations of five rivers- Padma, Meghna, Jamuna, Katcha, and Nobogonga in Bangladesh. High magnitudes of Pb (0.74-4.59 mg/kg ww), Cd (0.07-0.24 mg/kg ww), and Mn (0.45-2.03 mg/kg ww) were recorded in the sampling stations that exceeded the maximum permissible limits (MPL) proposed by different recognized organizations. Significant mean differences of metal concentrations were observed (p
A contaminated aquatic environment may end up in the food chain and pose risks to tourist health in a tourist destination. To assess the health risk for tourists that visit St. Martine Island, which is a popular domestic and foreign tourist destination in Bangladesh, a study is undertaken to analyse the level of heavy metal contamination from chromium (Cr), manganese (Mn), copper (Cu), zinc (Zn), arsenic (As), cadmium (Cd), lead (Pb), mercury (Hg) and iron (Fe) in six of the most consumed fish (L. fasciatus, R. kanagurta, H. nigrescens, P. cuneatus, P. annularis and S. rubrum) and five crustacean species, which consist of a shrimp (P. sculptilis), a lobster (P. versicolor) and three crabs (P. sanguinolentus, T. crenata and M. victor) captured. The samples were analysed for trace metals using atomic absorption spectrometer, and the concentrations of the metals were interpreted using the United State Environmental Protection Agency (USEPA) health risk model. The muscle and carapace/exoskeleton of shrimp, lobster and crabs were analysed and contained various concentrations of Pb, Hg, As, Cr, Cd, Fe, Cu, Zn and Mn. The hierarchy of the heavy metal in marine fish is Fe > Cd > Zn > Pb > Cu > Cr > Mn > Hg. The concentrations of Pb in the species R. kanagurta, H. nigresceus and S. rubrum were above the food safety guideline by Australia, New Zealand and other legislations in most marine fish and crustaceans. Crabs showed higher mean heavy metal concentrations than shrimp and lobster. Acceptable carcinogen ranges were observed in three fish species (R. kanagurata, H. nigresceus and S. rubrum) and one crustacean species (P. sculptilis) samples.
It has been extensively reported that chewing of smokeless tobacco (SLT) can lead to cancers of oral cavity. In present study, the relationship between arsenic (As) exposure via chewing/inhaling different SLT products in oral cancer patients have or/not consumed SLT products was studied. The As in different types of SLT products (gutkha, mainpuri, and snuff) and biological (scalp hair and blood) samples of different types of oral cancer patients and controls were analyzed. Both controls and oral cancer patients have same age group (ranged 30-60 years), socio-economic status, localities, and dietary habits. The concentrations of As in SLT products and biological samples were measured by electrothermal atomic absorption spectrophotometer after microwave-assisted acid digestion. The validity and accuracy of the methodology were checked by certified reference materials. The resulted data of present study indicates that the concentration of As was significantly higher in scalp hair and blood samples of oral cancer patients than those of controls (p<0.001). It was also observed that the values of As were two- to threefolds higher in biological samples of controls subjects, consuming SLT products as compared to those have none of these habits (p>0.01). The intake of As via consuming different SLT may have synergistic effects, in addition to other risk factors associated with oral cancer.
This study was conducted to determine the effects of rice husk ash (RHA) and Fe-coated rice husk ash (Fe-RHA) on the bioavailability and mobility of As, Cd, and Mn in mine tailings. The amendments were added to the tailings at 0, 5, 10, or 20% (w/w) and the mixtures were incubated for 0, 7, 15, 30, 45, and 60 days. The CaCl2 extractable As, Cd, and Mn in the amended tailings were determined at each interval of incubation period. In addition, the tailings mixture was leached with simulated rain water (SRW) every week from 0 day (D 0) until day 60 (D 60). The results showed that both RHA and Fe-RHA application significantly decreased the CaCl2-extractable Cd and Mn but increased that of As in the tailings throughout the incubation period. Consequently, addition of both RHA and Fe-RHA leached out higher amount of As from the tailings but decreased Cd and Mn concentration compared to the controls. The amount of As leached from the Fe-RHA-amended tailings was less than that from RHA-amended tailings. Application of both RHA and Fe-RHA could be an effective way in decreasing the availability of cationic heavy metals (Cd and Mn) in the tailings but these amendments could result in increasing the availability of anionic metalloid (As). Therefore, selection of organic amendments to remediate metal-contaminated tailings must be done with great care because the outcomes might be different among the elements.