Four new species of semiterrestrial gecarcinucid crabs are described from limestone and sandstone habitats in southwestern Sarawak, Malaysia: Terrathelphusa aglaia n. sp., T. cerina n. sp., T. kundong n. sp., and T. mas n. sp. The taxonomy of T. kuchingensis (Nobili, 1901) is discussed, its precise identity ascertained from fresh material, and its actual distribution determined. This increases the number of Terrathelphusa species in Borneo to eight.
A new species of limestone cave-adapted gecko of the Cyrtodactylus pulchellus complex, C. hidupselamanya sp. nov., is described from an isolated karst formation at Felda Chiku 7, Kelantan, Peninsular Malaysia. This formation is scheduled to be completely quarried for its mineral content. From what we know about the life history of C. hidupselamanya sp. nov., this will result in its extinction. A new limestone forest-adapted species, C. lenggongensis sp. nov., from the Lenggong Valley, Perak was previously considered to be conspecific with C. bintangrendah but a re-evaluation of morphological, color pattern, molecular, and habitat preference indicates that it too is a unique lineage worthy of specific recognition. Fortunately C. lenggongensis sp. nov. is not facing extinction because its habitat is protected by the UNESCO Archaeological Heritage of the Lenggong Valley due to the archaeological significance of that region. Both new species can be distinguished from all other species of Cyrtodactylus based on molecular evidence from the mitochondrial gene ND2 and its flanking tRNAs as well as having unique combinations of morphological and color pattern characteristics. Using a time-calibrated BEAST analysis we inferred that the evolution of a limestone habitat preference and its apparently attendant morphological and color pattern adaptations evolved independently at least four times in the C. pulchellus complex between 26.1 and 0.78 mya.
Plectostoma is a micro land snail restricted to limestone outcrops in Southeast Asia. Plectostoma was previously classified as a subgenus of Opisthostoma because of the deviation from regular coiling in many species in both taxa. This paper is the first of a two-part revision of the genus Plectostoma, and includes all non-Borneo species. In the present paper, we examined 214 collection samples of 31 species, and obtained 62 references, 290 pictures, and 155 3D-models of 29 Plectostoma species and 51 COI sequences of 19 species. To work with such a variety of taxonomic data, and then to represent it in an integrated, scaleable and accessible manner, we adopted up-to-date cybertaxonomic tools. All the taxonomic information, such as references, classification, species descriptions, specimen images, genetic data, and distribution data, were tagged and linked with cyber tools and web servers (e.g. Lifedesks, Google Earth, and Barcoding of Life Database). We elevated Plectostoma from subgenus to genus level based on morphological, ecological and genetic evidence. We revised the existing 21 Plectostoma species and described 10 new species, namely, P. dindingensis sp. n., P. mengaburensis sp. n., P. whitteni sp. n., P. kayiani sp. n., P. davisoni sp. n., P. relauensis sp. n., P. kubuensis sp. n., P. tohchinyawi sp. n., P. tenggekensis sp. n., and P. ikanensis sp. n. All the synthesised, semantic-tagged, and linked taxonomic information is made freely and publicly available online.
Nine new species constituting the 'spiny' group of dragon millipedes are assigned to the new genus Spinaxytes Srisonchai, Enghoff & Panha, gen. n. Seven new species are described from Thailand: S.biloba Srisonchai, Enghoff & Panha, sp. n. and S.palmata Srisonchai, Enghoff & Panha, sp. n. from Surat Thani Province, S.hasta Srisonchai, Enghoff & Panha, sp. n. from Chumphon Province, S.krabiensis Srisonchai, Enghoff & Panha, sp. n. (type species) and S.sutchariti Srisonchai, Enghoff & Panha, sp. n. from Krabi Province, S.uncus Srisonchai, Enghoff & Panha, sp. n., and S.macaca Srisonchai, Enghoff & Panha, sp. n. from Phang Nga Province; as well as one from Malaysia, S.tortioverpa Srisonchai, Enghoff & Panha, sp. n., and one from Myanmar, S.efefi Srisonchai, Enghoff & Panha, sp. n. The new genus is endemic to South Myanmar, South Thailand, and Malaysia, and all new species are restricted to limestone habitats. All were exclusively found living on humid rock walls and/or inside small caves. Complete illustrations of external morphological characters, an identification key, and a distribution map are provided.
A new species of semi-terrestrial crab of the genus Geosesarma (Sesarmidae) is described from a limestone cave in central Sarawak, Malaysian Borneo. Geosesarma sodalissp. nov. is characterised by its quadrate carapace, absence of a flagellum on the exopod of the third maxilliped, presence of 10 or 11 sharp tubercles on the dactylus of the chela and a diagnostic male first gonopod structure. This is the sixth species of Geosesarma reported from Sarawak, and the first member of the genus collected from inside caves.
This study presents a list of land snails and slugs found on limestone hills in the District of Bau, the state of Sarawak in Malaysian Borneo. Systematic and random sampling for land snails was conducted at eight limestone outcrops, namely, Gunung Stulang, Padang Pan, Gunung Kapor, Gunung Lobang Angin, Gunung Doya, Gunung Batu, Bukit Sekunyit and Gunung Sebayat. A total of 122 land snail species was documented with photographs of each species. Of the 122 species collected, 13 are new to science, namely, Acmella bauensissp. nov., Japonia bauensissp. nov., Plectostoma margaretchanaesp. nov., Microcystina arabiisp. nov., Microcystina atonisp. nov., Microcystina pariparisp. nov., Microcystina liratasp. nov., Microcystina oswaldbrakenisp. nov., Microcystina kilatsp. nov., Philalanka jambusanensissp. nov., Everettia microrhytidasp. nov., Everettia minutasp. nov., and Paralaoma sarawakensissp. nov.
This paper presents the first land snail species checklist for Gunung Kuang (Kuang Hill), a limestone hill located next to Gunung Kanthan that is recognised as one of the most important limestone hills for its diverse land snail fauna in Kinta Valley. Samplings were carried out at five plots in Gunung Kuang. This survey documented 47 land snail species, in which six species were identified as unique to Gunung Kuang. Approximately half of the land snails from Gunung Kanthan were found in Gunung Kuang. In addition, one of six unique species from Gunung Kanthan was also found in Gunung Kuang. These rich land snail species in Gunung Kuang are similar to other hills in Kinta Valley, but it is relatively lesser than the adjacent Gunung Kanthan. In view of Gunung Kuang's unique land snail species, and its location closest to disturbed Gunung Kanthan, Gunung Kuang should be considered in the conservation management plan for Gunung Kanthan.
Limestone hills are now gaining global conservation attention as hotspots for short-range endemic species. Levels of land snail endemism can be high at limestone hills, especially at hill clusters that are geographically isolated. In the State of Perak, Peninsular Malaysia, limestone hills have been opportunistically surveyed for land snails in the past, but the majority have yet to be surveyed. To address this knowledge gap, we systematically surveyed the terrestrial malacofauna of 12 limestone hills that, based on our opinion, are a representation of the limestone land snail assemblages within the State. Our inventory yielded high sampling completeness (>85%). We found 122 species of land snails, of which 34 species were unique to one of the surveyed hills. We identified 30 species that are potentially new to science. The number of land snail species recorded at each hill ranged between 39 and 63 species. Four of the sampled limestone hills namely, Prk 01 G. Tempurung, Prk 55 G. Pondok, Prk 47 Kanthan, and Prk 64 Bt Kepala Gajah, have high levels of species richness and unique species, representing 91% of the total species recorded in this study. We identified two clusters of limestone hills in central Perak with distinct differences in land snail species composition - a northern hill cluster on elevated granite bedrock and southern hill cluster in a low-lying valley surrounded by alluvial soils. As limestone hills continue to be quarried to meet the cement demand, the four identified limestone hills, along with other hills from the two clusters, warrant urgent conservation attention in order to maintain high species diversity within Perak's terrestrial malacofauna.
Limestone has been proven effective in removing metals from water and wastewater. A literature review indicated that limestone is capable of removing heavy metals such as Cu, Zn, Cd, Pb, Ni, Cr, Fe and Mn are through a batch process or by filtration technique. The removal capability is reported at up to 90%. However, to date most of the studies have been focused on synthetic wastewater. The present study attempts to investigate the suitability of limestone to attenuate total iron (Fe) from semi aerobic leachate at Pulau Burung Landfill Site in Penang, Malaysia. Iron was found in significant quantities at the landfill site. The study also aims to establish the Fe isotherm and breakthrough time of the proposed limestone filter for post-treatment to the migrating landfill leachate before its release to the environment. The Fe isotherms were established using a batch equilibrium test, while the breakthrough characteristics were determined using continuous flow permeating through a limestone column. The latter was used in order to simulate the continuous flow of leachate that would occur in the proposed limestone filter. The limestone media used in the experiment contain more than 90% CaCO3 with particle sizes ranging from 2 to 4 mm. Four filter columns (each 150 mm in diameter and 1000 mm depth) were installed at the landfill site. Metal loadings were kept below 0.5 kg /m3 day and the experiment was run continuously for 30 days. Initial results indicated that 90% of Fe can be removed from the leachate based on retention time of 57.8 min and surface loading of 12.2 m3/m2 day. For the batch study on the Fe isotherm, the results indicated that limestone is potentially useful as an alternative leachate treatment system at a relatively low cost.
The presence of ammoniacal nitrogen (N-NH3) in leachate is one of the problems normally faced by landfill operators. Slow leaching of wastes producing nitrogen and no significant mechanism for transformation of N-NH3 in the landfills causes a high concentration of ammoniacal nitrogen in leachate over a long period of time. A literature review showed that the removal of ammoniacal nitrogen from leachate was not well documented and to date, there were limited studies in Malaysia on this aspect, especially in adsorption treatment. The main objective of the present study was to investigate the suitability of activated carbon, limestone and a mixture of both materials as a filtering medium, in combination with other treatments capable of attenuating ammoniacal nitrogen which is present in significant quantity (between 429 and 1909 mg L(-1)) in one of the landfill sites in Malaysia. The results of the study show that about 40% of ammoniacal nitrogen with concentration of more than 1000 mg L(-1) could be removed either by activated carbon or a mixture of carbon with limestone at mixture ratio of 5:35. This result shows that limestone is potentially useful as a cost-effective medium to replace activated carbon for ammoniacal nitrogen removal at a considerably lower cost.
Kefir is a fermented milk obtained by fermenting milk with kefir grains. The chemical composition ofdairy and non-dairy sources may affect the growth and characterisation of lactic acid bacteria (LAB). In this study, different sources of milk (cow milk) and non-dairy milk (soymilk and coconut milk) were used as the fermentation media for kefir products. The objectives of the study were to isolate and characterise LAB from kefir drink produced from dairy and non-dairy milk. LAB was isolated using different cultural methods, such as MRS Agar, MRS with 0.8% CaCO3, and M17 Agar. The characteristics of the LAB isolates were determined using morphological, biochemical tests and the API 50 CHL kit. The physicochemical composition of the samples was determined using titratable acidity and pH level. Sensory evaluation of the kefir drink samples was also carried out. Results confirmed that the isolates were identified as Lactobacillus buchneri, Lactobacillus brevis 1, Leuconostoc mesenteroides, Lactobacillus acidophilus 3and Lactobacillus plantarum 1. The L. buchneri, L. brevis, Leu. mesenteroides and L. acidophilus are heterofermentative bacteria, whereas L. plantarum is a homofermentative bacterium. Four LAB isolates have the potential to be used as probiotic strains due to their high resistant to low pH and bile salt. The sensory scores of these products range between 5.00 and 8.00 in the 9-point hedonic scale. Most of the sensory panelists preferred cow milk kefir (p < 0.05) compared with coconut milk kefir and soy milk kefir during the sensory evaluation of all attributes. Meanwhile, the preference between coconut milk kefir and soy milk kefir was similar (p>0.05) in all attributes. Therefore, this study will be useful for probiotic manufacturers in the production of alternative probiotic drinks using dairy and non-dairy milk.
Bird surveys were conducted in the Bukit Kepala Gajah limestone area in Lenggong, Perak from July 2010 to January 2011. The study area was divided into three zones: forest edge, forest intermediate and forest interior. A point-count distance sampling method was used in the bird surveys. The study recorded 7789 detections, representing 100 bird species belonging to 28 families. Pycnonotidae, Timaliidae and Nectariniidae were the dominant families overall and showed the highest number of observations recorded in the study area whereas Motacillidae showed the fewest observations. The bird species were grouped into three feeding guilds: insectivores, frugivores and others (omnivores, carnivores, nectarivores and granivores). The species richness of insectivorous birds differed significantly among the forest zones sampled (Kruskal-Wallis: α=0.05, H=10.979, d.f.=2, p=0.004), with more insectivorous birds occurring in the forest interior. No significant differences were found among the zones in the species richness of either the frugivore guild or the composite others guild.
Bird surveys were conducted in the Padawan Limestone Area for seven days at each of two study sites, Giam and Danu, from August to December 2008. The purpose of the study was to compare the area's bird species richness and abundance of bird species in other limestone areas and in other forest types. The study also compared the species richness and relative abundance of birds in undisturbed and disturbed areas at both study sites. Twenty mist nets were deployed for 12 hours daily. During this study period, direct observations of birds were also made. In all, 80 species from 34 families were recorded at both sites. At Giam, 120 birds were mist-netted. These birds represented 31 species from 16 families. The direct observations at Giam recorded 13 species from 11 families. In the undisturbed area, 21 species from 13 families were mist-netted, whereas in the disturbed area, 21 species from 10 families were mist-netted. In Danu, a total of 48 birds, representing 25 species from 12 families, were mist-netted. The observations at Danu recorded 34 species from 19 families. Twelve species from 7 families were mist-netted in the undisturbed area, whereas 18 species from 11 families were mist-netted in the disturbed area. Statistical analysis showed that the species diversity index differed significantly between undisturbed and disturbed areas.
Due to similarity in composition to the mineral component of bones and human hard tissues, hydroxyapatite with chemical formula Ca10(PO4)6(OH)2 has been widely used in medical field. Both chicken and duck eggshells are mainly composed of calcium carbonate. An attempt has been made to fabricate nanohydroxyapatite (nHA) by chicken (CES) and duck eggshells (DES) as calcium carbonate source (CaCO3). CES and DES were reacted with diammonium hydrogen [(NH4)2HPO4] solution and subjected to microwave heating at 15 mins. Under the effect of microwave irradiation, nHA was produced directly in the solution and involved in crystallographic transformation. Sample characterization was done using by X-ray diffraction (XRD), fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM).
Use of dispersive clay as construction material requires treatment such as by chemical addition. Treatments to dispersive clay using pozzolan and Portland cement, singly and simultaneously, were carried out in this study. When used alone, the optimum amount of pozzolan required to treat a fully dispersive clay sample was 5%, but the curing time to reduce dispersion potential, from 100% to 30% or less, was 3 month long. On the other hand, also when used alone, a 3% cement content was capable of reducing dispersion potential to almost zero percent in only 7 days; and a 2% cement content was capable of achieving similar result in 14 days. However, treatment by cement alone is costly and could jeopardize the long term performance. Thus, a combined 5% pozzolan and 1.5% cement content was found capable of reducing dispersion potential from 100% to zero percent in 14 days. The results indicate that although simultaneous treatment with pozzolan and cement would extend the required curing time in comparison to treatment by cement alone of a higher content, the task could still be carried out in a reasonable period of curing time while avoiding the drawbacks of using either pozzolan or cement alone.
Carbonation for the curing of cement-based materials has been gaining increased attention in recent years, especially in light of emerging initiatives to reduce carbon dioxide (CO2) emissions. Carbonation method or CO2 curing is founded on the basis of the reaction between CO2 and cement products to form thermally stable and denser carbonate, which not only improves the physical and mechanical properties of cement-based materials, but also has the ability to utilize and store CO2 safely and permanently. This study aims to assess the effect of CO2 curing technology on the high-temperatures performance of cement blocks. Upon molding, dry-mix cement blocks were cured under statically accelerated carbonation condition (20% CO2 concentration with 70% relative humidity) for 28 days, followed by exposure to elevated temperatures of 300 °C to 800 °C in order to comprehensively study the principal phase changes and decompositions of cement hydrates. The results indicated that CO2 curing improved the performance of cement blocks, such as enhancement in the residual compressive strength and reducing the sorptivity. At 600 °C, the scanning electron microscopy (SEM) revealed a denser microstructure while thermal analisis and X-ray diffraction (XRD) analysis also clearly demonstrated that higher amounts of calcium carbonate were present in the cement blocks after CO2 curing, suggesting better high-temperature performance compared to natural cured cement blocks. In general, an improved high-temperature performance, specifically at 600 °C of the dry-mixed cement blocks was demonstrated by adopting the CO2 curing technology. This confirms the potential of utilizing CO2 curing technology in not only improving quality of cement blocks, new avenue for storing of CO2 in construction material can be realized at the same time.
Coal combustion and the disposal of combustion wastes emit enormous quantities of nano-sized particles that pose significant health concerns on exposure, particularly in unindustrialized countries. Samples of fresh and weathered class F fly ash were analysed through various techniques including X-ray fluorescence (XRF), X-ray diffraction (XRD), focused ion beam scanning electron microscopy (FIB-SEM), field-emission gun scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM) coupled with energy dispersive x-ray spectroscopy (EDS), and Raman Spectroscopy. The imaging techniques showed that the fresh and weathered coal fly ash nanoparticles (CFA-NPs) are mostly spherical shaped. The crystalline phases detected were quartz, mullite, ettringite, calcite, maghemite, hematite, gypsum, magnetite, clay residues, and sulphides. The most abundant crystalline phases were quartz mixed with Al-Fe-Si-K-Ti-O-amorphous phases whereas mullite was detected in several amorphous phases of Al, Fe, Ca, Si, O, K, Mg, Mn, and P. The analyses revealed that CFA-NPs are 5-500 nm in diameter and encapsulate several potentially hazardous elements (PHEs). The carbon species were detected as 5-50 nm carbon nanoballs of graphitic layers and massive fullerenes. Lastly, the aspects of health risks related to exposure to some detected ambient nanoparticles are also discussed.
In this study the surface properties of two particulate coral and polyhydroxybutrate (PHB) were studied in order to characterize them prior to use in composite production. Coral powder and PHB particle were evaluated using scanning electron microscopy and confocal laser scanning microscopy, to measure surface porosity and pores size. The results showed that coral powder has multiple pleomorphic micropores cross each others give appearance of micro-interconnectivity. Some pore reached to 18 microm with an average porosity of 70%. PHB revealed multiple different size pores extended to the depth, with an average some times reach 25 microm and porosity 45%. These findings demonstrate that both coral and PHB have excellent pores size and porosity that facilitate bone in growth, vascular invasion and bone development. We believe that incorporation of coral powder into PHB will make an excellent composite scaffold for tissue engineering.
In the present study, natural coral of porites species was used as scaffold combined with in vitro expanded bone marrow stem cell derived osteoblasts (BMSC-DO), to develop a tissue-engineered bone graft in a rat model. Coral was molded into the shape of rat mandible seeded with 5x10(6) /ml BMSC-DO subsequently implanted subcutaneously in the back of 5 week Sprague dawely rats for 3 months. Coral alone was implanted as a control. The implants were harvest and processed for gross inspection and histological observations. The results showed that newly bone grafts were successfully formed coral seeded with cells group showed smooth highly vascularized like bone tissue. Histological sections revealed mature bone formation and lots of blood vessel, the bone formation occurred in the manner resemble intramembraneous bone formation. This study demonstrates that coral can be use as a suitable scaffold material for delivering bone marrow mesenchymal stem cells in tissue engineering.
The study was carried out to evaluate macroscopically the ability of coral to repair a large size bone defect. A total 12 adult, male sheep were used in the study. The large bone defect (2.5cm x 0.5cm x 0.5cm) was created surgically on the left proximal femur and replaced by a block of coral (Porites sp.). Radiographs were obtained immediately after surgery and at 2, 4, 8 and 12 weeks post-implantation. Ultrasonographic examinations were carried out every 2 weeks after implantation up to 12 weeks using ultrasound machine (TOSHIBA Capasee II) connected with 7MHz frequency transducer. The sheep were euthanased at 2, 4, 8, and 12 weeks post-implantation and the bone examined grossly. Both ultrasonographs and radiographs taken at 8 and 12 weeks showed that the implants had been resorbed and left the space that much reduced in size. There was no sign of implant rejection observed in all animals. The results showed that processed coral has potential to become bone substitute for reconstructive bone surgery.