Displaying publications 1 - 20 of 507 in total

Abstract:
Sort:
  1. Fulltext Reaction Mechanism of Wollastonite In Situ Mineral Carbonation for CO2 Sequestration: Effects of Saline Conditions, Temperature, and Pressure
    Kashim MZ, Tsegab H, Rahmani O, Abu Bakar ZA, Aminpour SM
    ACS Omega, 2020 Nov 17;5(45):28942-28954.
    PMID: 33225124 DOI: 10.1021/acsomega.0c02358
    The research presented here investigates the reaction mechanism of wollastonite in situ mineral carbonation for carbon dioxide (CO2) sequestration. Because wollastonite contains high calcium (Ca) content, it was considered as a suitable feedstock in the mineral carbonation process. To evaluate the reaction mechanism of wollastonite for geological CO2 sequestration (GCS), a series of carbonation experiments were performed at a range of temperatures from 35 to 90 °C, pressures from 1500 to 4000 psi, and salinities from 0 to 90,000 mg/L NaCl. The kinetics batch modeling results were validated with carbonation experiments at the specific pressure and temperature of 1500 psi and 65 °C, respectively. The results showed that the dissolution of calcium increases with increment in pressure and salinity from 1500 to 4000 psi and 0 to 90000 mg/L NaCl, respectively. However, the calcium concentration decreases by 49%, as the reaction temperature increases from 35 to 90 °C. Besides, it is clear from the findings that the carbonation efficiency only shows a small difference (i.e., ±2%) for changing the pressure and salinity, whereas the carbonation efficiency was shown to be enhanced by 62% with increment in the reaction temperature. These findings can provide information about CO2 mineralization of calcium silicate at the GCS condition, which may enable us to predict the fate of the injected CO2, and its subsurface geochemical evolution during the CO2-fluid-rock interaction.
    Matched MeSH terms: Carbon Dioxide
  2. Fulltext Physiological and growth response of rice plants (Oryza sativa L.) to Trichoderma spp. inoculants
    Doni F, Isahak A, Che Mohd Zain CR, Wan Yusoff WM
    AMB Express, 2014;4:45.
    PMID: 24949276 DOI: 10.1186/s13568-014-0045-8
    Trichoderma spp., a known beneficial fungus is reported to have several mechanisms to enhance plant growth. In this study, the effectiveness of seven isolates of Trichoderma spp. to promote growth and increase physiological performance in rice was evaluated experimentally using completely randomized design under greenhouse condition. This study indicated that all the Trichoderma spp. isolates tested were able to increase several rice physiological processes which include net photosynthetic rate, stomatal conductance, transpiration, internal CO2 concentration and water use efficiency. These Trichoderma spp. isolates were also able to enhance rice growth components including plant height, leaf number, tiller number, root length and root fresh weight. Among the Trichoderma spp. isolates, Trichoderma sp. SL2 inoculated rice plants exhibited greater net photosynthetic rate (8.66 μmolCO2 m(-2) s(-1)), internal CO2 concentration (336.97 ppm), water use efficiency (1.15 μmoCO2/mmoH2O), plant height (70.47 cm), tiller number (12), root length (22.5 cm) and root fresh weight (15.21 g) compared to the plants treated with other Trichoderma isolates tested. We conclude that beneficial fungi can be used as a potential growth promoting agent in rice cultivation.
    Matched MeSH terms: Carbon Dioxide
  3. Fulltext Prediction of β-carotene solubility at supercritical conditions using regular solutions theory
    Kassim, K.M., Davarnejad, R.
    ASM Science Journal, 2007;1(2):143-154.
    MyJurnal
    The objective of this paper is to model the extraction of carotenoid with supercritical carbon dioxide as the solvent. Experimental data for the high pressure vapour-liquid phase equilibrium of the binary system carbon dioxide-carotenoid was reviewed for the elevated temperatures of 313.15, 323.15, 333.15 K and pressures up to 500 bar. The experimental data was correlated and modeled using Redlich-Kwong equation of state and regular solution methods. The use of the equation of state as an empirical correlation for collating and predicting liquid-liquid and liquid-dense fluid equilibria is discussed. It was concluded that the estimation of some of the parameters required for these calculations would be difficult if the solute (carotenoid) was a complex substance about which little was known apart from its structural formula. An alternative procedure is to apply activity coefficient expression of the regular solution theory type to each phase. Calculations along these lines are described and the physical basis for applying these methods under the relevant conditions is discussed. The regular solution theory approach in particular was found to be encouraging for the mutual miscibility calculations for heavy components (such as carotenoid) particularly for substances sensitive to temperature, though the interaction parameters for he prediction activity coefficients must be regarded as pressure dependent.
    Matched MeSH terms: Carbon Dioxide
  4. Fulltext A 1:1:1 co-crystal solvate comprising 2,2'-di-thiodi-benzoic acid, 2-chloro-benzoic acid and N,N-di-methyl-formamide: crystal structure, Hirshfeld surface analysis and computational study
    Tan SL, Tiekink ERT
    Acta Crystallogr E Crystallogr Commun, 2019 Apr 01;75(Pt 4):475-481.
    PMID: 31161060 DOI: 10.1107/S205698901900375X
    The asymmetric unit of the three-component title compound, 2,2'-di-thiodi-benzoic acid-2-chloro-benzoic acid-N,N-di-methyl-formamide (1/1/1), C14H10O4S2·C7H5ClO2·C3H7NO, contains a mol-ecule each of 2,2'-di-thiodi-benzoic acid (DTBA), 2-chloro-benzoic acid (2CBA) and di-methyl-formamide (DMF). The DTBA mol-ecule is twisted [the C-S-S-C torsion angle is 88.37 (17)°] and each carb-oxy-lic group is slightly twisted from the benzene ring to which it is connected [CO2/C6 dihedral angles = 7.6 (3) and 12.5 (3)°]. A small twist is evident in the mol-ecule of 2CBA [CO2/C6 dihedral angle = 4.4 (4)°]. In the crystal, the three mol-ecules are connected by hydrogen bonds with the two carb-oxy-lic acid residues derived from DTBA and 2CBA forming a non-symmetric eight-membered {⋯HOCO}2 synthon, and the second carb-oxy-lic acid of DTBA linked to the DMF mol-ecule via a seven-membered {⋯HOCO⋯HCO} heterosynthon. The three-mol-ecule aggregates are connected into a supra-molecular chain along the a axis via DTBA-C-H⋯O(hydroxyl-2CBA), 2CBA-C-H⋯O(hydroxyl-DTBA) and DTBA-C-H⋯S(DTBA) inter-actions. Supra-molecular layers in the ab plane are formed as the chains are linked via DMF-C-H⋯S(DTBA) contacts, and these inter-digitate along the c-axis direction without specific points of contact between them. A Hirshfeld surface analysis points to additional but, weak contacts to stabilize the three-dimensional architecture: DTBA-C=O⋯H(phenyl-DTBA), 2CBA-Cl⋯H(phenyl-DTBA), as well as a π-π contact between the delocalized eight-membered {⋯HOC=O}2 carb-oxy-lic dimer and the phenyl ring of 2CBA. The latter was confirmed by electrostatic potential (ESP) mapping.
    Matched MeSH terms: Carbon Dioxide
  5. Ordered mesoporous silica (OMS) as an adsorbent and membrane for separation of carbon dioxide (CO2)
    Chew TL, Ahmad AL, Bhatia S
    Adv Colloid Interface Sci, 2010 Jan 15;153(1-2):43-57.
    PMID: 20060956 DOI: 10.1016/j.cis.2009.12.001
    Separation of carbon dioxide (CO(2)) from gaseous mixture is an important issue for the removal of CO(2) in natural gas processing and power plants. The ordered mesoporous silicas (OMS) with uniform pore structure and high density of silanol groups, have attracted the interest of researchers for separation of carbon dioxide (CO(2)) using adsorption process. These mesoporous silicas after functionalization with amino groups have been studied for the removal of CO(2). The potential of functionalized ordered mesoporous silica membrane for separation of CO(2) is also recognized. The present paper reviews the synthesis of mesoporous silicas and important issues related to the development of mesoporous silicas. Recent studies on the CO(2) separation using ordered mesoporous silicas (OMS) as adsorbent and membrane are highlighted. The future prospectives of mesoporous silica membrane for CO(2) adsorption and separation are also presented and discussed.
    Matched MeSH terms: Carbon Dioxide/isolation & purification*; Carbon Dioxide/chemistry
  6. The effect of a forced-air warming blanket on patients' end-tidal and transcutaneous carbon dioxide partial pressures during eye surgery under local anaesthesia: a single-blind, randomised controlled trial
    Sukcharanjit S, Tan AS, Loo AV, Chan XL, Wang CY
    Anaesthesia, 2015 Dec;70(12):1390-4.
    PMID: 26348782 DOI: 10.1111/anae.13212
    Surgical drapes used during eye surgery are impermeable to air and hence risk trapping air underneath them. We investigated the effect of a forced-air warming blanket on carbon dioxide accumulation under the drapes in patients undergoing eye surgery under local anaesthesia without sedation. Forty patients of ASA physical status 1 and 2 were randomly assigned to either the forced-air warmer (n = 20) or a control heated overblanket (n = 20). All patients were given 1 l.min(-1) oxygen. We measured transcutaneous and end-tidal carbon dioxide partial pressures, heart rate, arterial pressure, respiratory rate, temperature and oxygen saturation before and after draping, then every 5 min thereafter for 30 min. The mean (SD) transcutaneous carbon dioxide partial pressure in the forced-air warming group stayed constant after draping at 5.7 (0.2) kPa but rose to a maximum of 6.4 (0.4) kPa in the heated overblanket group (p = 0.0001 for the difference at time points 15 min and later). We conclude that forced-air warming reduces carbon dioxide accumulation under the drapes in patients undergoing eye surgery under local anaesthesia.
    Matched MeSH terms: Carbon Dioxide/metabolism*
  7. Metal-Organic Framework Decorated Cuprous Oxide Nanowires for Long-lived Charges Applied in Selective Photocatalytic CO2 Reduction to CH4
    Wu H, Kong XY, Wen X, Chai SP, Lovell EC, Tang J, et al.
    Angew Chem Int Ed Engl, 2021 Apr 06;60(15):8455-8459.
    PMID: 33368920 DOI: 10.1002/anie.202015735
    Improving the stability of cuprous oxide (Cu2 O) is imperative to its practical applications in artificial photosynthesis. In this work, Cu2 O nanowires are encapsulated by metal-organic frameworks (MOFs) of Cu3 (BTC)2 (BTC=1,3,5-benzene tricarboxylate) using a surfactant-free method. Such MOFs not only suppress the water vapor-induced corrosion of Cu2 O but also facilitate charge separation and CO2 uptake, thus resulting in a nanocomposite representing 1.9 times improved activity and stability for selective photocatalytic CO2 reduction into CH4 under mild reaction conditions. Furthermore, direct transfer of photogenerated electrons from the conduction band of Cu2 O to the LUMO level of non-excited Cu3 (BTC)2 has been evidenced by time-resolved photoluminescence. This work proposes an effective strategy for CO2 conversion by a synergy of charge separation and CO2 adsorption, leading to the enhanced photocatalytic reaction when MOFs are integrated with metal oxide photocatalyst.
    Matched MeSH terms: Carbon Dioxide
  8. Z-Scheme Photocatalytic Systems for Carbon Dioxide Reduction: Where Are We Now?
    Zhang W, Mohamed AR, Ong WJ
    Angew Chem Int Ed Engl, 2020 Dec 14;59(51):22894-22915.
    PMID: 32009290 DOI: 10.1002/anie.201914925
    Transforming CO2 into fuels by utilizing sunlight is promising to synchronously overcome global warming and energy-supply issues. It is crucial to design efficient photocatalysts with intriguing features such as robust light-harvesting ability, strong redox potential, high charge-separation, and excellent durability. Hitherto, a single-component photocatalyst is incapable to simultaneously meet all these criteria. Inspired by natural photosynthesis, constructing artificial Z-scheme photocatalysts provides a facile way to conquer these bottlenecks. In this review, we firstly introduce the fundamentals of photocatalytic CO2 reduction and Z-scheme systems. Thereafter we discuss state-of-the-art Z-scheme photocatalytic CO2 reduction, whereby special attention is placed on the predominant factors that affect photoactivity. Additionally, further modifications that are important for efficient photocatalysis are reviewed.
    Matched MeSH terms: Carbon Dioxide
  9. Modulation of affinity of a marine pseudomonad for toluene and benzene by hydrocarbon exposure
    Law AT, Button DK
    Appl Environ Microbiol, 1986 Mar;51(3):469-76.
    PMID: 16347006
    Trace (microgram liter) quantities of either toluene or benzene injected into an amino-acid-limited continuous culture of Pseudomonas sp. strain T2 were utilized immediately with affinities of 2.6 and 6.8 liters g of cells h, respectively, and yielded large amounts of organic products, carbon dioxide, and cells. The immediate utilization of hydrocarbons by hydrocarbon-deprived organisms helps to establish the nutritional value of nonpolar substrates in the environment. The observation of small Michaelis constants for toluene transport led to tests of metabolic competition between hydrocarbons; however, competitive inhibition of toluene metabolism was not found for benzene, naphthalene, xylene, dodecane, or amino acids. Benzene and terpenes were inhibitory at milligram liter concentrations. Toluene was metabolized by a strongly inducible system when compared with benzene. The capacity of toluene to effect larger affinity values increased with exposure time and concentration. The kinetics of induction suggested saturation phenomena, resulting in an induction constant, K(ind), of 96 mug of toluene liter. Maximal induction of amino-acid-grown cells required about 80 h, with the affinity reaching 317 liters g of cells h.
    Matched MeSH terms: Carbon Dioxide
  10. Biodegradation of a medium-chain-length polyhydroxyalkanoate in tropical river water
    Ho YH, Gan SN, Tan IK
    Appl Biochem Biotechnol, 2002 10 25;102-103(1-6):337-47.
    PMID: 12396135
    The medium-chain-length polyhydroxyalkanoate (PHA(MCL)) produced by Pseudomonas putida PGA1 using saponified palm kernel oil as the carbon source could degrade readily in water taken from Kayu Ara River in Selangor, Malaysia. A weight loss of 71.3% of the PHA film occurred in 86 d. The pH of the river water medium fell from 7.5 (at d 0) to 4.7 (at d 86), and there was a net release of CO2. In sterilized river water, the PHA film also lost weight and the pH of the water fell, but to lesser extents. The C8 monomer of the PHA was completely removed after 6 d of immersion in the river water, while the proportions of the other monomers (C10, C12, and C14) were reversed from that of the undegraded PHA. By contrast, the monomer composition of the PHA immersed in sterilized river water did not change significantly from that of the undegraded PHA. Scanning electron microscopy showed physical signs of degradation on the PHA film immersed in the river water, but the film immersed in sterilized river water was relatively unblemished. The results thus indicate that the PHA(MCL) was degraded in tropical river water by biologic as well as nonbiologic means. A significant finding is that shorter-chain monomers were selectively removed throughout the entire PHA molecule, and this suggests enzymatic action.
    Matched MeSH terms: Carbon Dioxide/analysis
  11. A metabolomic approach to investigate effects of ocean acidification on a polar microalga Chlorella sp
    Tan YH, Lim PE, Beardall J, Poong SW, Phang SM
    Aquat Toxicol, 2019 Dec;217:105349.
    PMID: 31734626 DOI: 10.1016/j.aquatox.2019.105349
    Ocean acidification, due to increased levels of anthropogenic carbon dioxide, is known to affect the physiology and growth of marine phytoplankton, especially in polar regions. However, the effect of acidification or carbonation on cellular metabolism in polar marine phytoplankton still remains an open question. There is some evidence that small chlorophytes may benefit more than other taxa of phytoplankton. To understand further how green polar picoplankton could acclimate to high oceanic CO2, studies were conducted on an Antarctic Chlorella sp. Chlorella sp. maintained its growth rate (∼0.180 d-1), photosynthetic quantum yield (Fv/Fm = ∼0.69) and chlorophyll a (0.145 fg cell-1) and carotenoid (0.06 fg cell-1) contents under high CO2, while maximum rates of electron transport decreased and non-photochemical quenching increased under elevated CO2. GCMS-based metabolomic analysis reveal that this polar Chlorella strain modulated the levels of metabolites associated with energy, amino acid, fatty acid and carbohydrate production, which could favour its survival in an increasingly acidified ocean.
    Matched MeSH terms: Carbon Dioxide/analysis; Carbon Dioxide/toxicity
  12. Impact of Climate Change on Air Quality and Public Health in Urban Areas
    Hassan NA, Hashim Z, Hashim JH
    Asia Pac J Public Health, 2016 Mar;28(2 Suppl):38S-48S.
    PMID: 26141092 DOI: 10.1177/1010539515592951
    This review discusses how climate undergo changes and the effect of climate change on air quality as well as public health. It also covers the inter relationship between climate and air quality. The air quality discussed here are in relation to the 5 criteria pollutants; ozone (O3), carbon dioxide (CO2), nitrogen dioxide (NO2), sulfur dioxide (SO2), and particulate matter (PM). Urban air pollution is the main concern due to higher anthropogenic activities in urban areas. The implications on health are also discussed. Mitigating measures are presented with the final conclusion.
    Matched MeSH terms: Carbon Dioxide/analysis
  13. Fulltext Combined effect of CO(2) enrichment and foliar application of salicylic acid on the production and antioxidant activities of anthocyanin, flavonoids and isoflavonoids from ginger
    Ghasemzadeh A, Jaafar HZ, Karimi E, Ibrahim MH
    BMC Complement Altern Med, 2012 Nov 23;12:229.
    PMID: 23176249 DOI: 10.1186/1472-6882-12-229
    BACKGROUND: The increase in atmospheric CO(2) concentration caused by climate change and agricultural practices is likely to affect biota by producing changes in plant growth, allocation and chemical composition. This study was conducted to evaluate the combined effect of the application of salicylic acid (SA, at two levels: 0 and 10-3 M) and CO(2) enrichment (at two levels: 400 and 800 μmol·mol-1) on the production and antioxidant activities of anthocyanin, flavonoids and isoflavonoids from two Malaysian ginger varieties, namely Halia Bentong and Halia Bara.

    METHODS: High-performance liquid chromatography (HPLC) with photodiode array detection and mass spectrometry was employed to identify and quantify the flavonoids and anthocyanins in the ginger extracts. The antioxidant activity of the leaf extracts was determined by the 1,1-diphenyl-2-picrylhydrazyl (DPPH) and thiobarbituric acid (TBA) assays. The substrate specificity of chalcone synthase, the key enzyme for flavonoid biosynthesis, was investigated using the chalcone synthase (CHS) assay.

    RESULTS: CO(2) levels of 800 μmol·mol-1 significantly increased anthocyanin, rutin, naringenin, myricetin, apigenin, fisetin and morin contents in ginger leaves. Meanwhile, the combined effect of SA and CO(2) enrichment enhanced anthocyanin and flavonoid production compared with single treatment effects. High anthocyanin content was observed in H Bara leaves treated with elevated CO(2) and SA. The highest chalcone synthase (CHS) activity was observed in plants treated with SA and CO(2) enrichment. Plants not treated with SA and kept under ambient CO(2) conditions showed the lowest CHS activity. The highest free radical scavenging activity corresponded to H Bara treated with SA under high CO(2) conditions, while the lowest activity corresponded to H Bentong without SA treatment and under atmospheric CO(2) levels. As the level of CO(2) increased, the DPPH activity increased. Higher TBA activity was also recorded in the extracts of H Bara treated with SA and grown under high CO(2) conditions.

    CONCLUSIONS: The biological activities of both ginger varieties were enhanced when the plants were treated with SA and grown under elevated CO(2) concentration. The increase in the production of anthocyanin and flavonoids in plants treated with SA could be attributed to the increase in CHS activity under high CO(2) levels.

    Matched MeSH terms: Carbon Dioxide/metabolism*
  14. Understanding the performance and mechanism of Mg-containing oxides as support catalysts in the thermal dry reforming of methane
    Khairudin NF, Sukri MFF, Khavarian M, Mohamed AR
    Beilstein J Nanotechnol, 2018;9:1162-1183.
    PMID: 29719767 DOI: 10.3762/bjnano.9.108
    Dry reforming of methane (DRM) is one of the more promising methods for syngas (synthetic gas) production and co-utilization of methane and carbon dioxide, which are the main greenhouse gases. Magnesium is commonly applied in a Ni-based catalyst in DRM to improve catalyst performance and inhibit carbon deposition. The aim of this review is to gain better insight into recent developments on the use of Mg as a support or promoter for DRM catalysts. Its high basicity and high thermal stability make Mg suitable for introduction into the highly endothermic reaction of DRM. The introduction of Mg as a support or promoter for Ni-based catalysts allows for good metal dispersion on the catalyst surface, which consequently facilitates high catalytic activity and low catalyst deactivation. The mechanism of DRM and carbon formation and reduction are reviewed. This work further explores how different constraints, such as the synthesis method, metal loading, pretreatment, and operating conditions, influence the dry reforming reactions and product yields. In this review, different strategies for enhancing catalytic activity and the effect of metal dispersion on Mg-containing oxide catalysts are highlighted.
    Matched MeSH terms: Carbon Dioxide
  15. Fulltext Continuous-flow Heck synthesis of 4-methoxybiphenyl and methyl 4-methoxycinnamate in supercritical carbon dioxide expanded solvent solutions
    Lau PL, Allen RW, Styring P
    Beilstein J Org Chem, 2013;9:2886-97.
    PMID: 24367454 DOI: 10.3762/bjoc.9.325
    The palladium metal catalysed Heck reaction of 4-iodoanisole with styrene or methyl acrylate has been studied in a continuous plug flow reactor (PFR) using supercritical carbon dioxide (scCO2) as the solvent, with THF and methanol as modifiers. The catalyst was 2% palladium on silica and the base was diisopropylethylamine due to its solubility in the reaction solvent. No phosphine co-catalysts were used so the work-up procedure was simplified and the green credentials of the reaction were enhanced. The reactions were studied as a function of temperature, pressure and flow rate and in the case of the reaction with styrene compared against a standard, stirred autoclave reaction. Conversion was determined and, in the case of the reaction with styrene, the isomeric product distribution was monitored by GC. In the case of the reaction with methyl acrylate the reactor was scaled from a 1.0 mm to 3.9 mm internal diameter and the conversion and turnover frequency determined. The results show that the Heck reaction can be effectively performed in scCO2 under continuous flow conditions with a palladium metal, phosphine-free catalyst, but care must be taken when selecting the reaction temperature in order to ensure the appropriate isomer distribution is achieved. Higher reaction temperatures were found to enhance formation of the branched terminal alkene isomer as opposed to the linear trans-isomer.
    Matched MeSH terms: Carbon Dioxide
  16. Fulltext Potential of Zeolite and Algae in Biomass Immobilization
    Emami Moghaddam SA, Harun R, Mokhtar MN, Zakaria R
    Biomed Res Int, 2018;2018:6563196.
    PMID: 30643814 DOI: 10.1155/2018/6563196
    The interest in utilizing algae for wastewater treatment has been increased due to many advantages. Algae-wastewater treatment system offers a cost-efficient and environmentally friendly alternative to conventional treatment processes such as electrocoagulation and flocculation. In this biosystem, algae can assimilate nutrients in the wastewater for their growth and simultaneously capture the carbon dioxide from the atmosphere during photosynthesis resulting in a decrease in the greenhouse gaseousness. Furthermore, the algal biomass obtained from the treatment process could be further converted to produce high value-added products. However, the recovery of free suspended algae from the treated effluent is one of the most important challenges during the treatment process as the current methods such as centrifugation and filtration are faced with the high cost. Immobilization of algae is a suitable approach to overcome the harvesting issue. However, there are some drawbacks with the common immobilization carriers such as alginate and polyacrylamide related to low stability and toxicity, respectively. Hence, it is necessary to apply a new carrier without the mentioned problems. One of the carriers that can be a suitable candidate for the immobilization is zeolite. To date, various types of zeolite have been used for the immobilization of cells of bacteria and yeast. If there is any possibility to apply them for the immobilization of algae, it needs to be considered in further studies. This article reviews cell immobilization technique, biomass immobilization onto zeolites, and algal immobilization with their applications. Furthermore, the potential application of zeolite as an ideal carrier for algal immobilization has been discussed.
    Matched MeSH terms: Carbon Dioxide
  17. Fulltext Cyanobacteria: Photoautotrophic Microbial Factories for the Sustainable Synthesis of Industrial Products
    Lau NS, Matsui M, Abdullah AA
    Biomed Res Int, 2015;2015:754934.
    PMID: 26199945 DOI: 10.1155/2015/754934
    Cyanobacteria are widely distributed Gram-negative bacteria with a long evolutionary history and the only prokaryotes that perform plant-like oxygenic photosynthesis. Cyanobacteria possess several advantages as hosts for biotechnological applications, including simple growth requirements, ease of genetic manipulation, and attractive platforms for carbon neutral production process. The use of photosynthetic cyanobacteria to directly convert carbon dioxide to biofuels is an emerging area of interest. Equipped with the ability to degrade environmental pollutants and remove heavy metals, cyanobacteria are promising tools for bioremediation and wastewater treatment. Cyanobacteria are characterized by the ability to produce a spectrum of bioactive compounds with antibacterial, antifungal, antiviral, and antialgal properties that are of pharmaceutical and agricultural significance. Several strains of cyanobacteria are also sources of high-value chemicals, for example, pigments, vitamins, and enzymes. Recent advances in biotechnological approaches have facilitated researches directed towards maximizing the production of desired products in cyanobacteria and realizing the potential of these bacteria for various industrial applications. In this review, the potential of cyanobacteria as sources of energy, bioactive compounds, high-value chemicals, and tools for aquatic bioremediation and recent progress in engineering cyanobacteria for these bioindustrial applications are discussed.
    Matched MeSH terms: Carbon Dioxide/metabolism
  18. Formate assay in body fluids: application in methanol poisoning
    Makar AB, McMartin KE, Palese M, Tephly TR
    Biochem Med, 1975 Jun;13(2):117-26.
    PMID: 1
    Matched MeSH terms: Carbon Dioxide/blood
  19. Fulltext Estimation of carbon dioxide (CO2) reduction by utilization of algal biomass bioplastic in Malaysia using carbon emission pinch analysis (CEPA)
    Abdul-Latif NS, Ong MY, Nomanbhay S, Salman B, Show PL
    Bioengineered, 2020 12;11(1):154-164.
    PMID: 32013677 DOI: 10.1080/21655979.2020.1718471
    Carbon dioxide (CO2) emission will increase due to the increasing global plastic demand. Statistical data shows that plastic production alone will contribute to at least 20% of the annual global carbon budget in the near future. Hence, several alternative methods are recommended to overcome this problem, such as bio-product synthesis. Algae consist of diverse species and have huge potential to be a promising biomass feedstock for a range of purposes, including bio-oil production. The convenient cultivation method of algae could be one of the main support for algal biomass utilization. The aim of this study is to forecast and outline the strategies in order to meet the future demand (year 2050) of plastic production and, at the same time, reduce CO2 emission by replacing the conventional plastic with bio-based plastic. In this paper, the analysis for 25%, 50% and 75% CO2 reduction has been done by using carbon emission pinch analysis. The strategies of biomass utilization in Malaysia are also enumerated in this study. This study suggested that the algal biomass found in Malaysia coastal areas should be utilized and cultivated on a larger scale in order to meet the increasing plastic demand and, at the same time, reduce carbon footprint. Some of the potential areas for macroalgae sea-farming cultivation in Sabah coastline (Malaysia), comprised of about 3885 km2 (388,500 ha) in total, have been highlighted. These potential areas have the potential to produce up to 14.5 million tonnes (Mt)/y of macroalgae in total, which can contribute 370 Mt of phenol for bioplastic production.
    Matched MeSH terms: Carbon Dioxide/analysis*; Carbon Dioxide/metabolism
  20. Fulltext Carbon capture and storage with lipid production in integrated system of aqueous ammonia with marine mutant Synechococcus PCC 7002 IIUM01
    Azlin Suhaida Azmi, Mohamed Anwar Awan, Azura Amid, Noor Illi Mohamad Puad, Fathilah Binti Ali
    Biological and Natural Resources Engineering Journal, 2020;3(1):14-27.
    MyJurnal
    Carbon capture and storage (CCS) involves capturing, transporting and storing CO2 geologically underground permanently. Carbon capture using solvent such as amine and aqueous ammonia has been extensively studied by many researchers. However, this capture technology for CCS scheme is costly. As an alternative, CO2 emission can be cost-effectively captured and stored by utilizing the well-understood natural photosynthetic process of marine cyanobacteria. In contrast, the capturing process using cyanobacteria is very slow compared to the chemical absorption mentioned prior. Hence, this study aimed to investigate carbon capturing and storing process using integrated aqueous ammonia and mutated marine cyanobacteria (Synechococcus PCC 7002 IIUM01). The conditions that can maximize CO2 reduction under various conditions; CO2 flow rate (Lpm), absorption temperature (C) and aqueous ammonia concentrations (% (w/v)) were to be identified. The effectiveness of the mutant cyanobacteria was quantified by measuring the cell concentration, percentage reduction in CO2 concentration and lipid content. Synechococcus PCC 7002 IIUM01 showed it robustness by growing in aqueous ammonia solution at the concentration of 0.5 to 1% (w/v) at which the parent strain was not able to tolerate. The best conditions in maximizing CO2 capture and storage while sustaining growth optimally and being a potential biofuel source was observed at 0.5 Lpm of 15% CO2 gas flow rate, 0.75% (w/v) of ammonia concentration and 33C of absorption temperature. At this specified condition, around 68% of CO2 removal was achieved with 9% (w/w) yield of lipid and more than 13% (w/v) of cell concentration obtained.
    Matched MeSH terms: Carbon Dioxide
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links