MyMedR

Evaluation of bone healing following immediate and delayed dental implant placement

Younis L, Taher A, Abu-Hassan MI, Tin O

J Contemp Dent Pract, 2009;10(4):35-42.

PMID: 19575052

The purpose of this study was to compare bone healing and coronal bone remodeling following both immediate and delayed placement of titanium dental implants in extraction sockets.

Matched MeSH terms: Osseointegration*

Periodic Assessment of Peri-implant Tissue Changes: Imperative for Implant Success

Rahman SA, Muhammad H, Haque S, Alam MK

J Contemp Dent Pract, 2019 Feb 01;20(2):173-178.

PMID: 31058631

AIM: The aim of this study was to evaluate the changes in the peri-implant hard and soft tissues and implant stability and to assess the correlation of bone loss and peri-implant probing depth with implant stability.

MATERIALS AND METHODS: Twenty-one patients with implants were included in this study and implants were assessed by resonance frequency analysis (RFA). Bone levels of the implants were assessed by measuring mesial and distal bone levels from the periapical radiograph, and soft tissue was assessed from probing depth using a periodontal probe. Implants were assessed for stability and probing depth at pre-loading, at 3 months and 6 months post-loading. RFA and probing depth were statistically compared from different time points. Correlation of probing depth and marginal bone loss with implant stability was also determined.

RESULTS: The average change in implant stability quotient (ISQ) measurements from pre-loading to 6 months post-loading was found to be statistically significant (p <0.005). The average probing depth reduced from 1.767 mm at pre-loading to 1.671 mm at post-loading 3 months, and 1.600 mm at post-loading 6 months. At 6 months of function, radiographic examination yielded 0.786 mm mesial bone loss and 0.8 mm distal bone loss. It was found to be statistically significant (p <0.005) but within an acceptable range. No significant correlation was found between implant stability and bone loss; and implant stability and probing depth.

CONCLUSION: The study revealed an increasing trend in implant stability values with the time that indicates successful osseointegration. Increasing mean values for mesial and distal bone loss were also found.

CLINICAL SIGNIFICANCE: The success of dental implants is highly dependent on the quality of bone and implant-bone interface, i.e., osseointegration. The most important factors that influence the survival rate of an implant is initial stability. The present study found the changes in the peri-implant hard and soft tissues and implant stability. This article, while being a prospective study, may show the evidence of successful osseointegration by increasing trend in implant stability (RFA) values with time which can help to the clinician in the long-term management of implants.

Matched MeSH terms: Osseointegration

Evaluation of suitable biodegradable scaffolds for engineered bone tissue

Phang MY, Ng MH, Tan KK, Aminuddin BS, Ruszymah BH, Fauziah O

Med J Malaysia, 2004 May;59 Suppl B:198-9.

PMID: 15468886

Tricalcium phosphate/hydroxyapatite (TCP/HA), hydroxyapatite (HA), chitosan and calcium sulphate (CaSO4) were studied and evaluated for possible bone tissue engineered construct acting as good support for osteogenic cells to proliferate, differentiate, and eventually spread and integrate into the scaffold. Surface morphology visualized by SEM showed that scaffold materials with additional fibrin had more cell densities attached than those without, depicting that the presence of fibrin and collagen fibers were truly a favourite choice of cells to attach. In comparison of various biomaterials used incorporated with fibrin, TCP/HA had the most cluster of cells attached.

Matched MeSH terms: Osseointegration/physiology

Coral--polyhydroxybutrate composite scaffold for tissue engineering: prefabrication properties

Al-Salihi KA, Samsudin AR

Med J Malaysia, 2004 May;59 Suppl B:202-3.

PMID: 15468888

In this study the surface properties of two particulate coral and polyhydroxybutrate (PHB) were studied in order to characterize them prior to use in composite production. Coral powder and PHB particle were evaluated using scanning electron microscopy and confocal laser scanning microscopy, to measure surface porosity and pores size. The results showed that coral powder has multiple pleomorphic micropores cross each others give appearance of micro-interconnectivity. Some pore reached to 18 microm with an average porosity of 70%. PHB revealed multiple different size pores extended to the depth, with an average some times reach 25 microm and porosity 45%. These findings demonstrate that both coral and PHB have excellent pores size and porosity that facilitate bone in growth, vascular invasion and bone development. We believe that incorporation of coral powder into PHB will make an excellent composite scaffold for tissue engineering.

Matched MeSH terms: Osseointegration/physiology

Gross, radiology and ultrasonographic evaluation of coral post-implantation in sheep femur

Fadilah A, Zuki AB, Loqman MY, Zamri-Saad M, Norimah Y, Asnah H

Med J Malaysia, 2004 May;59 Suppl B:178-9.

PMID: 15468876

The study was carried out to evaluate macroscopically the ability of coral to repair a large size bone defect. A total 12 adult, male sheep were used in the study. The large bone defect (2.5cm x 0.5cm x 0.5cm) was created surgically on the left proximal femur and replaced by a block of coral (Porites sp.). Radiographs were obtained immediately after surgery and at 2, 4, 8 and 12 weeks post-implantation. Ultrasonographic examinations were carried out every 2 weeks after implantation up to 12 weeks using ultrasound machine (TOSHIBA Capasee II) connected with 7MHz frequency transducer. The sheep were euthanased at 2, 4, 8, and 12 weeks post-implantation and the bone examined grossly. Both ultrasonographs and radiographs taken at 8 and 12 weeks showed that the implants had been resorbed and left the space that much reduced in size. There was no sign of implant rejection observed in all animals. The results showed that processed coral has potential to become bone substitute for reconstructive bone surgery.

Matched MeSH terms: Osseointegration/physiology*

Comparative study between dense and porous hydroxyapatite using light and scanning electron microscopy

Pohchi A, Suzina AH, Samsudin AR, Al-Salihi KA

Med J Malaysia, 2004 May;59 Suppl B:151-2.

PMID: 15468863

This in vivo study revealed that porous hydroxyapatite (PHA) and dense hydroxyapatite (DHA) are good implant materials that can accelerate bone healing and resorbed in acceptable time. But there were differences in the mechanism of the resorption of DHA and PHA due to variability in the physical properties and osteogenicity.

Matched MeSH terms: Osseointegration/physiology

A "healthy apatite" for bone repair

Best SM, Patel N, Porter AE, Bonfield W

Med J Malaysia, 2004 May;59 Suppl B:129-30.

PMID: 15468852

Bone is unique in its ability to adapt structure to functional requirements, but as is all too obvious in an ever-ageing population it is susceptible to a number of degenerative diseases. Therefore there is an increasing need for materials for bone replacement. Clearly, the ideal material with which to replace bone, would be bone itself, but the major problem now facing us is that there is an insufficient supply of the natural bone to satisfy the clinical requirements. Hence, there is a need for the development of chemically synthesised bone graft substitutes

Matched MeSH terms: Osseointegration/physiology*

The effect of chicken, pigeon, and turkey demineralized bone matrix (DBM) implanted in ulnar defects fixed with the intramedullary-external skeletal fixator (IM-ESF) tie-in in pigeons (Columba livia): histological evaluations

Jalila A, Redig PT, Wallace LJ, Ogema TR, Bechtold JE, Kidder L

Med J Malaysia, 2004 May;59 Suppl B:125-6.

PMID: 15468850

Avian demineralized bone matrix (ADBM) powder prepared from chicken, pigeon, and turkey sources induced bone formation via endochondral and intramembranous processes, as in mammalian studies. There were no significant differences in percentage of new bone, percentage of cartilage, surface-forming osteoblast area, or osteoclast count between gaps treated with chicken, pigeon, and turkey DBM. However, there was a significantly (p<0.05) higher percentage of inflammatory area in gaps treated with chicken DBM than in gaps treated with pigeon DBM.

Matched MeSH terms: Osseointegration/physiology*

An in vivo study of a locally-manufactured hydroxyapatite-based material as bone replacement material

Abdul Razak NH, Al-Salihi KA, Samsudin AR

Med J Malaysia, 2004 May;59 Suppl B:119-20.

PMID: 15468847

Defects were created in the mandible of a rabbit model whereby the right side was implanted with hydroxyapatite (HA) while the left side was left empty to act as control. Both the implant and control sites were evaluated clinically and histologically at 4,12,20,22 weeks. Decalcified sections were studied under confocal laser scanning microscope. No reactive cells were evident microscopically in all sections. There was bone ingrowth as early as 4 weeks when viewed by the topographic method. Enhancement of osteoconduction was evident by the presence of abundant capillaries, perivascular tissue and osteoprogenitor cells of the host. At 22 weeks, the implanted defect showed mature bone formation filling almost the whole field. This study demonstrated that the dense HA exhibits excellent biocompatibility as noted by the complete absence of reactive cells. It also promotes osteoconduction.

Matched MeSH terms: Osseointegration/physiology

Histological evaluation of the early bone response to hydroxyapatite (HA) implanted in rabbit tibia

Khadijah K, Mashita M, Saidu MF, Fazilah F, Khalid KA

Med J Malaysia, 2004 May;59 Suppl B:123-4.

PMID: 15468849

This study is to qualitatively evaluate a locally produced hydroxyapatite (HA), made by AMREC-SIRIM in an experimental animal bone defect using New Zealand White (NZW) rabbits. HA cylindrical blocks measuring 2.5 mm (D) x 1.0 mm (H) were implanted in the rabbits' left tibia. The tibias were harvested within one to three weeks post-implantation. The implantion site was cut into thin undecalcified sections of about 30 microm to 60 microm and stained with Toluidine Blue and Goldner's Masson Trichrome. Microscopic examinations using standard light microscopy of these slides were performed.

Matched MeSH terms: Osseointegration/physiology*

A comparative study of osseointegration phenomenon in coated and non-coated NiTi implants in a rabbit model

Najafpour HD, Suzina AH, Nizam A, Samsudin AR

Med J Malaysia, 2004 May;59 Suppl B:121-2.

PMID: 15468848

There was a significant increased in Absolute Contact Length measurements of endosteal bone growth along the Nickel-Titanium (NiTi) implant coated with the natural coral powder and Hydroxyapatite (HA) compared to the non-calcium coated implants. This study demonstrated that coated implants seemed to show earlier and higher osseointergration phenomena compared to non coated ones. Furthermore, there was significantly greater bone-to-implant contact at the apical 1/3rd of the coated implants.

Matched MeSH terms: Osseointegration/physiology*

In vivo study of CORAGRAF: a preliminary results

Rosdan S, Al-Salihi KA, Suzina AH, Samsudin AR

Med J Malaysia, 2004 May;59 Suppl B:111-2.

PMID: 15468843

The main objective of the study was to determine the biodegradability, resorption and osteoconductivity potency of coral implant. Coral blocks (CORAGRAF) were prepared from sea coral Porites species. The blocks were implanted in the right mandible of rabbit model. Implants were harvested at 2 and 4 weeks intervals and subjected for light and scanning electron microscopy. Dense hydroxyapatite (DHA) was implanted in the left mandible as a control. The results of this study demonstrated that CORAGRAF is a good implant material that can accelerates bone healing and be resorbed in an acceptable time. The mechanisms of the resorption seemed to be the same (crumbling process), a first step where the edge of the coral become powdery then a second step which could be phagocytosis and dissolution in extracellular fluid.

Matched MeSH terms: Osseointegration

Metallic materials stimulating bone formation

Kokubo T

Med J Malaysia, 2004 May;59 Suppl B:91-2.

PMID: 15468833

Metallic materials implanted into bone defects are generally encapsulated by a fibrous tissue. Some metallic materials such as titanium and tantalum, however, have been revealed to bond to the living bone without forming the fibrous tissue, when they were subjected to NaOH solution and heat treatments. Thus treated metals form bone tissue around them even in muscle, when they take a porous form. This kind of osteoconductive and osteoinductive properties are attributed to sodium titanate or tantalate layer on their surfaces formed by the NaOH and heat treatments. These layers induce the deposition of bonelike apatite on the surface of the metals in the living body. This kind of bioactive metals are useful as bone substitutes even highly loaded portions, such as hip joint, spine and tooth root.

Matched MeSH terms: Osseointegration/physiology*

Microstructure and properties of crystalline bioglass compositions prepared by polymeric route

Doreya MI, Mona EW, Afaf ES, Hanan HB

Med J Malaysia, 2004 May;59 Suppl B:21-2.

PMID: 15468799

The standard bioglass composition GS45 as well as with excess silica GS50 or with the addition of 5% titanium oxide GS45+Ti5, were prepared by the polymeric route. The different glass components were added to the formed polymer. Firing at 700 degrees C gave an amorphous product with microporous texture that readily crystallizes out at 900 degrees C. The prepared materials were highly porous with two modes of pore system micro-pores and macro-pores with a size ranging between 100 microm to 0.006 microm and a porosity reaching 73%. The measured bulk density was between 0.36 to 1.1g/cm3. The fired material preserved the former structure of the polymer precursor. Biocompatibility was verified in vitro and vivo. IR of the specimens previously immersed in SBF revealed the formation of apatite like layer. While the histology sections of implants in rate femurs showed new bone tissue or bone trabeculae after 21 days.

Matched MeSH terms: Osseointegration/physiology

Tissue-engineered bone applied for alveolar ridge augmentation with simultaneous implant

Ueda M

Med J Malaysia, 2004 May;59 Suppl B:29.

PMID: 15468803

Matched MeSH terms: Osseointegration/physiology

Early clinical and radiographic analysis of the Fitmore cup

Merican AM, Randle R

J Arthroplasty, 2006 Sep;21(6):846-51.

PMID: 16950037

The Fitmore titanium mesh cementless acetabular component in 115 hip arthroplasties was reviewed at an average of 33 months of follow-up. None were revised nor had infection. One hip dislocated 4 years postoperatively. Two femoral components were revised. The average Harris Hip Score at the last follow-up was 90 points. In the 96 sets of radiographs available, there was no loosening or new radiolucency. One hip had nonprogressive osteolysis adjacent to a screw. This press-fit cup has its polar region flattened and is rim loading. Noncontact (gaps) at the acetabular floor is expected and is not critical for fixation. In all but 6 hips, these gaps filled. In 5 hips, a minimal gap (

Matched MeSH terms: Osseointegration

Fulltext Hearing rehabilitation in congenital canal atresia

Mazita A, Fazlina WH, Abdullah A, Goh BS, Saim L

Singapore Med J, 2009 Nov;50(11):1072-6.

PMID: 19960162

The purpose of this study was to review the results of our patients with congenital canal atresia after implantation of bone-anchored hearing aids (BAHA). The occurrence of complications was also reviewed.

Matched MeSH terms: Osseointegration

An in vitro study to evaluate the genotoxicity of value added hydroxyapatite as a bone replacement material

Akram Hassan, Swaminathan D

Sains Malaysiana, 2011;40.

Hydroxyapatite (HA) used for bone replacement is one of the most active areas of ceramic biomaterials research currently. It has been used clinically for the last 20 years due to its excellent biocompatibility, osseoconduction and osseointegration. Many modifications have been done to develop a stronger, tougher and biocompatible ceramic biomaterial because pure HA is brittle. Researchers in Universiti Sains Malaysia had developed this value added HA that is stronger and less brittle compared to pure HA. The objective of this in vitro study was to evaluate the genotoxic characteristic of the value added HA based material by using Bacterial Reverse Mutation Assay (Ames test). The Bacterial Reverse Mutation Assay of HA was performed on Salmonella typhimurium strains TA98, TA100, TA1535, TA1537 and Escherichia coli strain WP2 uvrA using the preincubation method in the presence and absence of an exogenous metabolic activation system. All the bacterial tester strains treated with and without S9 Mix showed no increase of revertant colonies with increase in concentration of test substance for both the dose finding test and the main test. The number of revertant colonies was less than twice that of the solvent control for all the five bacterial strains and this was reproducible for both the dose finding test and the main test. The numbers of revertant colonies in the negative and positive controls were within the background data of our laboratory. In conclusion the results of the tests showed that the value added HA was considered to have no reverse mutagenic potential under the present test conditions.

Matched MeSH terms: Osseointegration

Primary stability of self-tapping dual etched implants

Kassim ZH, Nor Hisham ND, Dardiri NA, Goot Heah K, Hazwani Baharuddin I, De Angelis N

Minerva Stomatol, 2019 Dec;68(6):291-296.

PMID: 32052617 DOI: 10.23736/S0026-4970.19.04242-0

BACKGROUND: The aims of this study were to enumerate the primary implant stability quotient (ISQ) value of self-tapping dual etched implants and to explore the influence of parameters such as implant length, implant diameter, age, gender, implant location and osteotomy preparation on the ISQ value.

METHODS: Retrospective data from clinical worksheets given to participants during two implant courses held between the periods of 2013 to 2014 were evaluated. A total of 61 implants were considered based on the inclusion criteria. The effects of parameters such as implant diameter, implant length, age, gender, implant location and osteotomy protocol on ISQ values were analyzed.

RESULTS: Mean ISQ value for all implants was 67.21±9.13. Age of patients (P=0.016) and location of implants (P=0.041) had a significant linear relationship with the ISQ values. Within the age limit of the patients in this study, it was found that an increase in one year of patient's age results in 0.20 decrease in ISQ value (95% CI: -0.36, -0.04). However, placing an implant in the posterior maxilla may negatively affect the ISQ with a likely decrease in primary stability by 6.76 ISQ value (95% CI: -13.22, -0.30).

CONCLUSIONS: The results suggest that the mean ISQ achieved by the participants were comparable with the range reported for this particular type of implants. The patient's age and location of implants were elucidated as the determinant factors of primary implant stability.

Matched MeSH terms: Osseointegration

Fulltext In Situ Controlled Surface Microstructure of 3D Printed Ti Alloy to Promote Its Osteointegration

Shan L, Kadhum AAH, Al-Furjan MSH, Weng W, Gong Y, Cheng K, et al.

Materials (Basel), 2019 Mar 10;12(5).

PMID: 30857349 DOI: 10.3390/ma12050815

It is well known that three-dimensional (3D) printing is an emerging technology used to produce customized implants and surface characteristics of implants, strongly deciding their osseointegration ability. In this study, Ti alloy microspheres were printed under selected rational printing parameters in order to tailor the surface micro-characteristics of the printed implants during additive manufacturing by an in situ, controlled way. The laser path and hatching space were responsible for the appearance of the stripy structure (S), while the bulbous structure (B) and bulbous⁻stripy composite surface (BS) were determined by contour scanning. A nano-sized structure could be superposed by hydrothermal treatment. The cytocompatibility was evaluated by culturing Mouse calvaria-derived preosteoblastic cells (MC3T3-E1). The results showed that three typical microstructured surfaces, S, B, and BS, could be achieved by varying the 3D printing parameters. Moreover, the osteogenic differentiation potential of the S, B, and BS surfaces could be significantly enhanced, and the addition of nano-sized structures could be further improved. The BS surface with nano-sized structure demonstrated the optimum osteogenic differentiation potential. The present research demonstrated an in situ, controlled way to tailor and optimize the surface structures in micro-size during the 3D printing process for an implant with higher osseointegration ability.

Matched MeSH terms: Osseointegration

Displaying publications 1 - 20 of 34 in total