The flame retardancy of medium density fiberboard (MDF) made from mixture of rubberwood fibers and recycled old corrugated containers was studied. Aluminum trihydroxide (ATH) was used as a fire retardant additive and mixed with the fibers to manufacture experimental MDF panels using wet process. Phenol formaldehyde (PF) resin in liquid, 2% based on oven dry weight of fibers, was used along with 0%, 10%, 15% and 20% of ATH. The flame retardant test was done using the limiting oxygen index (LOI) test. The other properties investigated include internal bond strength, thickness swelling and water absorption. The results showed that ATH loading increased as the LOI of MDF increased. This demonstrated that ATH could improved the fire retardant property of MDF at sufficient loading. An increase in concentration of ATH showed an increase in the IB values of MDF made without resin. MDF panels made without resin showed a progressive increase in internal bond as the composition of recycled old corrugated containers fiber increased. Addition of resin improved internal bond strength and reduced thickness swelling, and water absorption. Thickness swelling of panel increased as the composition of recycled old corrugated containers fiber increased. Scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX) showed that there is indication of ATH and resin filling the void space in between fibers.
The objectives of this study were predicting the transmission and survival of L. monocytogenes in cooked ham during supply chain. Cooked ham are frequently contaminated with L. monocytogenes during postprocessing steps through contact on surface of processing, handling, packaging equipment. Transfer rate of L. monocytogenes on static and dynamic condition in various surface type was investigated. The prevalence and level of L. monocytogenes in cooked ham at plant as well as the prevalence of unsatisfactory processing at retail were studied. A Monte Carlo simulation model was created by using @risk. The simulation predicted that the prevalence was 11.76 % with 90% confidence interval of 2% to 25% and estimated level was -4.02 log CFU/cm2. It was estimated to be occurred on slicing step at plant. Our results suggest that, the prevalence and level of L. monocytogenes can be reduced by Good Handling Process application and/or HACCP application.
OBJECTIVE: To review evidence on the impact of health warning messages on tobacco packages.
DATA SOURCES: Articles were identified through electronic databases of published articles, as well as relevant 'grey' literature using the following keywords: health warning, health message, health communication, label and labelling in conjunction with at least one of the following terms: smoking, tobacco, cigarette, product, package and pack.
STUDY SELECTION AND DATA EXTRACTION: Relevant articles available prior to January 2011 were screened for six methodological criteria. A total of 94 original original articles met inclusion criteria, including 72 quantitative studies, 16 qualitative studies, 5 studies with both qualitative and qualitative components, and 1 review paper: Canada (n=35), USA (n=29) Australia (n=16), UK (n=13), The Netherlands (n=3), France (n=3), New Zealand (n=3), Mexico (n=3), Brazil (n=2), Belgium (n=1), other European countries (n=10), Norway (n=1), Malaysia (n=1) and China (n=1).
RESULTS: The evidence indicates that the impact of health warnings depends upon their size and
DESIGN: whereas obscure text-only warnings appear to have little impact, prominent health warnings on the face of packages serve as a prominent source of health information for smokers and non-smokers, can increase health knowledge and perceptions of risk and can promote smoking cessation. The evidence also indicates that comprehensive warnings are effective among youth and may help to prevent smoking initiation. Pictorial health warnings that elicit strong emotional reactions are significantly more effective.
CONCLUSIONS: Health warnings on packages are among the most direct and prominent means of communicating with smokers. Larger warnings with pictures are significantly more effective than smaller, text-only messages.
The objectives of this study were to develop composite films using various gelatin sources with corn oil (CO) incorporation (55.18%) and to investigate the mechanical and physical properties of these films as potential packaging films. There were increases (p < 0.05) in the tensile strength (TS) and puncture strength (PS) of films when the concentration of gelatin increased. The mechanical properties of these films were also improved when compared with films produced without CO. Conversely, the water barrier properties of composite films decreased (p < 0.05) when the concentration of gelatin in composite films increased. Comparing with pure gelatin films, water and oxygen barrier properties of gelatin films decreased when manufactured with the inclusion of CO.
Pistachio nut (Pistacia vera L.) is one of the popular tree nuts in the world. Proper selection of packaging materials is necessary to prevent absorption of moisture and aflatoxin formation which will influence the overall product quality and safety. This research is undertaken to study the effect of different type of flexible packaging films on the moisture and aflatoxin contents of whole pistachio nuts during storage at ambient temperature (22-28 °C) and relative humidity of 85-100%. Five types of plastic films tested were low density polyethylene (LDPE) which serves as the control, food-grade polyvinyl chloride (PVC), nylon (LDPE/PA), polyamide/polypropylene (PA/PP) and polyethylene terephthalate (PET). The moisture content and aflatoxin content of pistachio nuts were measured using oven drying method and HPLC, respectively. Sample were analysed at 0, 2, 4, 6, 8 and 10 months during the storage period. Results showed that there was an increase in moisture content with the increase in storage time of pistachio nuts. The increase in moisture content was associated with the aflatoxin level of pistachio nuts during storage time. All the packaging materials except LDPE delayed the moisture absorption and aflatoxin formation of the product. The most suitable packaging materials for maintaining the quality and safety of pistachio nuts is PET films followed by nylon, PA/PP and PVC. The shelf-life of pistachio can be extended from 2 months (Control) to 5 months when PET is used as the packaging material.
Wearout reliability and high temperature storage life (HTSL) activation energy of Au and Pd-coated Cu (PdCu) ball bonds are useful technical information for Cu wire deployment in nanoscale semiconductor device packaging. This paper discusses the influence of wire type on the wearout reliability performance of Au and PdCu wire used in fine pitch BGA package after HTSL stress at various aging temperatures. Failure analysis has been conducted to identify the failure mechanism after HTSL wearout conditions for Au and PdCu ball bonds. Apparent activation energies (Eaa) of both wire types are investigated after HTSL test at 150 °C, 175 °C and 200 °C aging temperatures. Arrhenius plot has been plotted for each ball bond types and the calculated Eaa of PdCu ball bond is 0.85 eV and 1.10 eV for Au ball bond in 110 nm semiconductor device. Obviously Au ball bond is identified with faster IMC formation rate with IMC Kirkendall voiding while PdCu wire exhibits equivalent wearout and or better wearout reliability margin compare to conventional Au wirebond. Lognormal plots have been established and its mean to failure (t50) have been discussed in this paper.
As Malaysian economies grow, Malaysian per capita income is likely to increase. From economics point of view, it is expected that better-off consumers will move to better quality of food attributes such as freshness, food safety, quality and healthfulness in their food intake. This study aimed to investigate the demand for eggs attributes by Malaysian consumers. The study considers the conjoint analysis technique as a method for acquiring insights into preferences for eggs product. The technique was applied to establish the trade-offs that Malaysian consumers make between size, colour, size of packaging, functional attribute and price in the purchasing of eggs for 202 respondents. Least squares regression was utilized to estimate the relative importance of attributes for eggs. The results revealed that the ideal characteristic of egg was one with large size (grade A), omega eggs, brown, and ten per packs. We also found that consumers were also willing to pay more for their preferred attributes. The results found in the study provide valuable inputs to producers or marketers to improve their marketing efforts as well as market positioning, in line with the demanded eggs attributes.
Bakery products become a regular food in most part of the world and are essential commodities today. There is a high potential for business growth in selling bakery products. In the business world, Small-Medium Enterprises (SMEs) are primarily engaged in the bakery business, but cannot compete with the branded bakery Industry. The SMEs in Malaysia are striving hard to achieve growth in the business of bakery products. The present case study deals with the issues faced by SMEs and provided some valid recommendations to resolve the existing problems in the bakery business. The case analysis and its findings reveal that SMEs have unstructured marketing strategies and needs enhancements in the areas of packaging, value add to the bakery products, focus on promotion and appropriate advertising strategies. Further, the analysis reveals that more coverage of selling points for bakery products, the increased number of distribution centers and proper incentives to the agents may definitely improve the marketing of bakery products.
In determining consumer’s acceptance of any products in the market, packaging appearance, branding and pricing of the products are important. This study focused on consumer’s perception towards the outlook of the coffee packaging which resulted in influencing their purchasing decision through survey study. This current study was done on three main issues namely appropriateness of appearance, branding and pricing as reflected by the first impression towards the product’s packaging. Survey was done targeting on consumers (n = 100) reside in Kelantan, Malaysia through printed and online questionnaires distribution. Results obtained shows that consumers notice the differences possessed by each coffee packaging in the market and they purchase what they like based on their perception. According to Pearson Correlation, respondents also have the opinion that appearance, branding and pricing are correlated to each other in order to convey the correct messages to the correct group of people (p-value > 0.5). Response from the respondents reflected the behaviour of consumers reside in Kelantan that the overall outlook (packaging appearance, branding and pricing) of a coffee packaging were taken into consideration during their buying process. Therefore, it is crucial for the packaging itself to be able to create emotional attachment in consumers’ mind during their first glimpse.
The increase use of synthetic packaging films in food products has led to serious environmental problems due to their total non-biodegradability property. Nutrient composition and sensory acceptability of chicken patties formulated with various levels of Pleurotus sajor-caju popularly known as grey oyster mushroom (oM) and wrapped with degradable plastic were studied. The chicken patties were formulated with either 0, 25 or 50% of fresh oM. The results showed that chicken patty formulated with 25% PSC has protein content of 17.46% lower than the control patty which had 18.13% but it was not significant (p>0.05). After storage, cooked chicken patty formulated with 25% oM had protein content of 21.53% lower than the control patty (23 .90%) but it was not significant (p>0 .05). However, incorporation of oM in chicken patties resulted in decreasing of fat content significantly (p0 .05) from 15.58 (control) to 13.33% after storage. On the other nutrient, the concentration of f3-glucan were detected at values ranged between 0.70 and 0.76 (g1100 g) after 6 month. Other results showed that patty formulated with 25% oM received the highest scores for all attributes except for aroma. Meanwhile, patty prepared with 50% oM received the highest score of aroma attribute after 6 month of storage. However, the score values for all attributes of all oM-based patties were not statistically different with control patty (p> 0.05). In conclusion, the addition of oM at 25% can be recommended for the purpose of lowering fat content while keeping protein and f3-glucan unchanged without jeopardizing sensorial properties. This investigation therefore, suggested that biodegradable plastic can be used in packing any type of processed meat-based products.
OBJECTIVES: To monitor and analyse impacts of the interaction between tobacco excise tax policy and industry price strategy, on the price level and variation of cigarettes sold in five Southeast Asian countries (Indonesia, Cambodia, Lao PDR, the Philippines and Vietnam).
METHODS: Prices of cigarette sold by sticks and packs were collected through an in-person survey of retailers during 2011. Mean cigarette prices and price variation were calculated in each study country for single cigarettes, whole packs and brand groups.
RESULTS: Price variation of whole packs was greater in countries with ad-valorem excise tax structures (Cambodia, Lao PDR and Vietnam) than in countries with multitiered specific excise taxes (Indonesia and the Philippines). The price variation for single sticks appeared to be driven by local currency denomination. Cigarettes sold individually cost more per stick than cigarettes sold in whole packs in every brand group except for Indonesia's domestic brands.
CONCLUSIONS: Tobacco industry strategy and excise tax structure drove the price level and variation of cigarettes sold in packs, while currency denominations influence the selling price of single sticks. To maximise the effectiveness of tobacco tax policies, countries should adopt specific excise tax structures to decrease cigarette price variation, which would minimise opportunities for smokers to 'trade down' to a cheaper brand to avoid a tax-driven price increase.
KEYWORDS: Low/Middle Income Country; Packaging and Labelling; Price; Surveillance and Monitoring; Taxation
Consumers today prefer to purchase ready-to-eat, fresh-cut fruit that is readily available at the markets and retailers. They generally select the fresh-cut fruit base on the quality, freshness, nutrition and safety. The effects of packaging condition on fresh-cut Cantaloupe were studied during 18 days of storage at 2°C and 87% RH. Fresh-cut Cantaloupe pieces were packed in a Polypropylene (PP) container. As a control, the container was cover with lid without film, while Sample 1 (S1) was sealed only by a 40 μm PP film and Sample 2 (S2) was sealed with a 40 μm PP film and then adding the lid cover. Changes in colour, firmness Total Soluble Solids (TSS), pH, Titratable Acidity (TA) and Total Plate Count (TPC) were evaluated over time. During storage, it was found that the firmness significantly decreased from day 0 until day in all packaging conditions. Color parameters Luminosity (L*) and Chromaticity (C) were significantly change at the significance level of 95% (p
Knowledge of physical characteristics of Malaysian variety pomelo fruits are necessary for the design of some post harvesting, processing systems such as cleaning, handling, grading and packaging system. For proper development of pomelo grading systems, important relationships between the mass and some physical characteristics of pomelo fruits such as length, width, thickness, surface area, projected areas and volumes must be known. The aim of this research was to measure physical characteristics of two Malaysian varieties of pomelo fruit; Ledang (PO55) and Tambun (PO52) varieties. In this study, the mass of pomelo fruit was evaluated and correlated to measure physical characteristics using Linear, Quadratic, S-curve and Power models. The results showed that the correlation of the mass of pomelo fruit with all measured physical characteristics was significant at the 0.01 probability level. In the nutshell, mass modeling of pomelo fruit for Ledang (PO55) and Tambun (PO52) varieties based on the projected area are recommended according to economical view.
Petroleum based thermoplastics are widely used in a range of applications, particularly in packaging. However, their usage has resulted in soaring pollutant emissions. Thus, researchers have been driven to seek environmentally friendly alternative packaging materials which are recyclable as well as biodegradable. Due to the excellent mechanical properties of natural fibres, they have been extensively used to reinforce biopolymers to produce biodegradable composites. A detailed understanding of the properties of such composite materials is vital for assessing their applicability to various products. The present review discusses several functional properties related to packaging applications in order to explore the potential of bamboo fibre fabric-poly (lactic) acid composites for packaging applications. Physical properties, heat deflection temperature, impact resistance, recyclability and biodegradability are important functional properties of packaging materials. In this review, we will also comprehensively discuss the chronological events and applications of natural fibre biopolymer composites.
The aim of this work is to study the behavior of biodegradable sugar palm starch (SPS) based thermoplastic containing agar in the range of 10-40wt%. The thermoplastics were melt-mixed and then hot pressed at 140°C for 10min. SEM investigation showed good miscibility between SPS and agar. FT-IR analysis confirmed that SPS and agar were compatible and inter-molecular hydrogen bonds existed between them. Incorporation of agar increased the thermoplastic starch tensile properties (Young's modulus and tensile strength). The thermal stability and moisture uptake increased with increasing agar content. The present work shows that starch-based thermoplastics with 30wt% agar content have the highest tensile strength. Higher content of agar (40wt%) resulted to more rough cleavage fracture and slight decrease in the tensile strength. In conclusion, the addition of agar improved the thermal and tensile properties of thermoplastic SPS which widened the potential application of this eco-friendly material. The most promising applications for this eco-friendly material are short-life products such as packaging, container, tray, etc.
The current research discusses the development of poly (lactic acid) (PLA) and poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) reinforced nanocrystalline cellulose bionanocomposites. The nanocrystalline cellulose was derived from waste oil palm empty fruit bunch fiber by acid hydrolysis process. The resulting nanocrystalline cellulose suspension was then surface functionalized by TEMPO-mediated oxidation and solvent exchange process. Furthermore, the PLA/PHBV/nanocrystalline cellulose bionanocomposites were produced by solvent casting method. The effect of the addition of nanocrystalline cellulose on structural, morphology, mechanical and barrier properties of bionanocomposites was investigated. The results revealed that the developed bionanocomposites showed improved mechanical properties and decrease in oxygen permeability rate. Therefore, the developed bio-based composite incorporated with an optimal composition of nanocrystalline cellulose exhibits properties as compared to the polymer blend.
The shelf life of rambutan is often limited due to rapid water loss from the spinterns and browning of the pericarp. An integrated approach, which combined hot water treatment (HWT) (56 °C for 1 min), oxalic acid (OA) dip (10% for 10 min) and modified atmosphere packaging (MAP), was used to study their effectiveness on the quality of rambutan during storage (10 °C, 90-95% relative humidity). Significant differences were observed in rambutan quality with the combination of MAP + HWT + OA after 20 days of storage. This treatment combination resulted into better retention of firmness and colour (L and a* values) than in the control. Change in the total soluble solid content was significantly delayed however the titratable acidity showed no significant change in comparison to the control at the end of storage.
A renewable resource, epoxidized jatropha oil (EJO), was used as a green plasticizer and added to poly(lactic acid) (PLA). EJO was compounded into PLA at different contents. The addition of 3 wt % EJO to the PLA demonstrates significant improvement in flexibility, which leads to a percentage increase of about 7000% in elongation at break. This tensile result was confirmed by surface morphology analysis with clear proof of plastic deformation in EJO-plasticized PLA. EJO imparts a good heat stabilization effect. Thermal stability of PLA was enhanced upon addition of EJO, which is due to their good interaction and plasticizer dispersion within the PLA matrix. This EJO-plasticized PLA has wide applications in various industries, such as packaging of food and non-food products.
As the annual production of the solid waste generable in the form of spent coffee bean powder (SCBP) is over 6 million tons, its utilization in the generation of green energy, waste water treatment and as a filler in biocomposites is desirable. The objective of this article is to analyze the possibilities to valorize coffee bean powder as a filler in cellulose matrix. Cellulose matrix was dissolved in the relatively safer aqueous solution mixture (8% LiOH and 15% Urea) precooled to -12.5°C. To the cellulose solution (SCBP) was added in 5-25wt% and the composite films were prepared by regeneration method using ethyl alcohol as a coagulant. Some SCBP was treated with aq. 5% NaOH and the composite films were also prepared using alkali treated SCBP as a filler. The films of composites were uniform with brown in color. The cellulose/SCBP films without and with alkali treated SCBP were characterized by FTIR, XRD, optical and polarized optical microscopy, thermogravimetric analysis (TGA) and tensile tests. The maximum tensile strength of the composite films with alkali treated SCBP varied between (106-149MPa) and increased with SCBP content when compared to the composites with untreated SCBP. The thermal stability of the composite was higher at elevated temperatures when alkali treated SCBP was used. Based on the improved tensile properties and photo resistivity, the cellulose/SCBP composite films with alkali treated SCBP may be considered for packaging and wrapping of flowers and vegetables.