MyMedR

Displaying publications 1 - 20 of 73 in total

Abstract:

Sort:

Effect of different temperature variations on the physiological state of catfish species: a systematic review

Kasihmuddin SM, Cob ZC, Noor NM, Das SK

Fish Physiol Biochem, 2024 Apr;50(2):413-434.
PMID: 38367084 DOI: 10.1007/s10695-024-01323-8

Catfish are a highly diverse group of fish that are found in various regions across the globe. The significance of catfish culture extends to various aspects, including food security, economic advancement, preservation of cultural legacy, and ecological stewardship. The catfish industry is presently encountering unprecedented challenges as a consequence of the variability in water temperature caused by climate change. Temperature is a significant abiotic component that regulates and restricts fish physiology throughout their life cycle. The impact of severe temperatures on various species of catfish is dependent upon the magnitude of the stressor and additional influencing factors. This paper presents an analysis of the effects of temperature fluctuations on various aspects of catfish species, including growth and survival, blood parameters, enzymatic and hormone response, oxygen consumption rates, sound generation and hearing skills, nutritional requirements, and other phenotypic attributes. While this review is certainly not exhaustive, it offers a broad synopsis of the ideal temperature ranges that are most favorable for several catfish species. In-depth research to investigate the interacting impacts of severe temperature occurrences in conjunction with other associated environmental stresses on a wider variety of catfish species is crucial in order to further our understanding of how catfish species will respond to the anticipated climate change in the future.

Matched MeSH terms: Sound
Fulltext Influence of MHz-order acoustic waves on bacterial suspensions

Chew NSL, Ooi CW, Yeo LY, Tan MK

Ultrasonics, 2024 Mar;138:107234.
PMID: 38171227 DOI: 10.1016/j.ultras.2023.107234

The development of alternative techniques to efficiently inactivate bacterial suspensions is crucial to prevent transmission of waterborne illness, particularly when commonly used techniques such as heating, filtration, chlorination, or ultraviolet treatment are not practical or feasible. We examine the effect of MHz-order acoustic wave irradiation in the form of surface acoustic waves (SAWs) on Gram-positive (Escherichia coli) and Gram-negative (Brevibacillus borstelensis and Staphylococcus aureus) bacteria suspended in water droplets. A significant increase in the relative bacterial load reduction of colony-forming units (up to 74%) can be achieved by either increasing (1) the excitation power, or, (2) the acoustic treatment duration, which we attributed to the effect of the acoustic radiation force exerted on the bacteria. Consequently, by increasing the maximum pressure amplitude via a hybrid modulation scheme involving a combination of amplitude and pulse-width modulation, we observe that the bacterial inactivation efficiency can be further increased by approximately 14%. By combining this scalable acoustic-based bacterial inactivation platform with plasma-activated water, a 100% reduction in E. coli is observed in less than 10 mins, therefore demonstrating the potential of the synergistic effects of MHz-order acoustic irradiation and plasma-activated water as an efficient strategy for water decontamination.

Matched MeSH terms: Sound
Fulltext Surface Acoustic Wave (SAW) Sensors for Hip Implant: A Numerical and Computational Feasibility Investigation Using Finite Element Methods

Hafizh M, Soliman MM, Qiblawey Y, Chowdhury MEH, Islam MT, Musharavati F, et al.

Biosensors (Basel), 2023 Jan 02;13(1).
PMID: 36671914 DOI: 10.3390/bios13010079

In this paper, a surface acoustic wave (SAW) sensor for hip implant geometry was proposed for the application of total hip replacement. A two-port SAW device was numerically investigated for implementation with an operating frequency of 872 MHz that can be used in more common radio frequency interrogator units. A finite element analysis of the device was developed for a lithium niobate (LiNBO3) substrate with a Rayleigh velocity of 3488 m/s on COMSOL Multiphysics. The Multiphysics loading and frequency results highlighted a good uniformity with numerical results. Afterwards, a hip implant geometry was developed. The SAW sensor was mounted at two locations on the implant corresponding to two regions along the shaft of the femur bone. Three discrete conditions were studied for the feasibility of the implant with upper- and lower-body loading. The loading simulations highlighted that the stresses experienced do not exceed the yield strengths. The voltage output results indicated that the SAW sensor can be implanted in the hip implant for hip implant-loosening detection applications.

Matched MeSH terms: Sound
Effect of constraint-induced music therapy in idiopathic sudden sensorineural hearing loss: A systematic review and meta-analysis

Vasiwala RA, Elhariri SY, Teng CL, Mohamad I

Noise Health, 2022;24(113):75-81.
PMID: 35900392 DOI: 10.4103/nah.nah_33_21

BACKGROUND: Idiopathic sudden sensorineural hearing loss (ISSNHL) is commonly encountered in audiologic and otolaryngologic practice. Constraint-induced music/sound therapy (CIMT) is characterized by the plugging of the normal ear (constraint) and the simultaneous, stimulation of the affected ear with music, which is based on a well-established neurorehabilitation approach. Corticosteroid therapy (CST) is the current mainstay of treatment. The prognosis for hearing recovery depends on many factors including the severity of hearing loss, age, and presence of vertigo.
OBJECTIVE: To analyze the effectiveness of CIMT with CST in ISSNHL.
METHODS: We performed a systematic search, using specific keywords relevant to our study, in PubMed, Cochrane Central Register of Controlled Trials, and additional sources of published trials till December 2020. We then screened all search results obtained according to our inclusion/exclusion criteria and performed a quality assessment on all studies using the Newcastle-Ottawa scale and using MedCalc, a meta-analysis was performed on suitable studies.
RESULTS: The recovery rates of three included nonrandomized studies were assessed at 1 to 3 months. A total of 229 (CST: 131, CST + CIMT: 98) patients were pooled for meta-analysis. The meta-analysis using the random-effect model found the relative risk of recovery rate within 3 months to be 1.213 (95% confidence interval 0.709-2.074), a result that is not statistically significant.
CONCLUSION: Although our analysis results do not demonstrate the noticeable effect of CIMT in ISSNHL, it can support be a gainful adjunct to CST for better hearing results than CST alone. Therefore, it needs further prospective randomized controlled multicenter trials with a large sample.

Matched MeSH terms: Sound
The prioritization of visuo-spatial associations during mental imagery

Umar H, Mast FW, Cacchione T, Martarelli CS

Cogn Process, 2021 May;22(2):227-237.
PMID: 33404898 DOI: 10.1007/s10339-020-01010-5

While previous research has shown that during mental imagery participants look back to areas visited during encoding it is unclear what happens when information presented during encoding is incongruent. To investigate this research question, we presented 30 participants with incongruent audio-visual associations (e.g. the image of a car paired with the sound of a cat) and later asked them to create a congruent mental representation based on the auditory cue (e.g. to create a mental representation of a cat while hearing the sound of a cat). The results revealed that participants spent more time in the areas where they previously saw the object and that incongruent audio-visual information during encoding did not appear to interfere with the generation and maintenance of mental images. This finding suggests that eye movements can be flexibly employed during mental imagery depending on the demands of the task.

Matched MeSH terms: Sound
Fulltext Development of a Novel Design and Subsequent Fabrication of an Automated Touchless Hand Sanitizer Dispenser to Reduce the Spread of Contagious Diseases

Das A, Barua A, Mohimin MA, Abedin J, Khandaker MU, Al-Mugren KS

Healthcare (Basel), 2021 Apr 10;9(4).
PMID: 33920290 DOI: 10.3390/healthcare9040445

BACKGROUND: The use of a touchless automated hand sanitizer dispenser may play a key role to reduce contagious diseases. The key problem of the conventional ultrasonic and infra-red-based dispensers is their malfunctioning due to the interference of sunlight, vehicle sound, etc. when deployed in busy public places. To overcome such limitations, this study introduced a laser-based sensing device to dispense sanitizer in an automated touchless process.
METHOD: The dispensing system is based on an Arduino circuit breadboard where an ATmega328p microcontroller was pre-installed. To sense the proximity, a light-dependent resistor (LDR) is used where the laser light is to be blocked after the placement of human hands, hence produced a sharp decrease in the LDR sensor value. Once the LDR sensor value exceeds the lower threshold, the pump is actuated by the microcontroller, and the sanitizer dispenses through the nozzle.
RESULTS AND DISCUSSION: A novel design and subsequent fabrication of a low-cost, touchless, automated sanitizer dispenser to be used in public places, was demonstrated. The overall performance of the manufactured device was analyzed based on the cost and power consumption, and environmental factors by deploying it in busy public places as well as in indoor environment in major cities in Bangladesh, and found to be more efficient and cost-effective compared to other dispensers available in the market. A comprehensive discussion on this unique design compared to the conventional ultrasonic and infra-red based dispensers, is presented to show its suitability over the commercial ones. The guidelines of the World Health Organization are followed for the preparation of sanitizer liquid. A clear demonstration of the circuitry connections is presented herein, which facilitates the interested individual to manufacture a cost-effective dispenser device in a relatively short time and use it accordingly. Conclusion: This study reveals that the LDR-based automated hand sanitizer dispenser system is a novel concept, and it is cost-effective compared to the conventional ones. The presented device is expected to play a key role in contactless hand disinfection in public places, and reduce the spread of infectious diseases in society.

Matched MeSH terms: Sound
Fulltext Compact Elliptical UWB Antenna for Underwater Wireless Communications

Alhawari ARH, Majeed SF, Saeidi T, Mumtaz S, Alghamdi H, Hindi AT, et al.

Micromachines (Basel), 2021 Apr 07;12(4).
PMID: 33917167 DOI: 10.3390/mi12040411

The increasing needs of free licensed frequency bands like Industrial, Scientific, and Medical (ISM), Wireless Local Area Network (WLAN), and 5G for underwater communications required more bandwidth (BW) with higher data transferring rate. Microwaves produce a higher transferring rate of data, and their associated devices are smaller in comparison with sonar and ultrasonic. Thus, transceivers should have broad BW to cover more of a frequency band, especially from ultra-wideband (UWB) systems, which show potential outcomes. However, previous designs of similar work for underwater communications were very complicated, uneasy to fabricate, and large. Therefore, to overcome these shortcomings, a novel compact elliptical UWB antenna is designed to resonate from 1.3 to 7.2 GHz. It is invented from a polytetrafluoroethylene (PTFE) layer with a dielectric constant of 2.55 mm and a thickness of 0.8 mm. The proposed antenna shows higher gain and radiation efficiency and stability throughout the working band when compared to recent similarly reported designs, even at a smaller size. The characteristics of the functioning antenna are investigated through fluid mediums of fresh-water, seawater, distilled water, and Debye model water. Later, its channel capacity, bit rate error, and data rate are evaluated. The results demonstrated that the antenna offers compact, easier fabrication with better UWB characteristics for underwater 5G communications.

Matched MeSH terms: Sound
Fulltext Classification of abnormal location in medium voltage switchgears using hybrid gravitational search algorithm-artificial intelligence

Illias HA, Lim MM, Abu Bakar AH, Mokhlis H, Ishak S, Amir MDM

PLoS One, 2021;16(7):e0253967.
PMID: 34197530 DOI: 10.1371/journal.pone.0253967

In power system networks, automatic fault diagnosis techniques of switchgears with high accuracy and less time consuming are important. In this work, classification of abnormal location in switchgears is proposed using hybrid gravitational search algorithm (GSA)-artificial intelligence (AI) techniques. The measurement data were obtained from ultrasound, transient earth voltage, temperature and sound sensors. The AI classifiers used include artificial neural network (ANN) and support vector machine (SVM). The performance of both classifiers was optimized by an optimization technique, GSA. The advantages of GSA classification on AI in classifying the abnormal location in switchgears are easy implementation, fast convergence and low computational cost. For performance comparison, several well-known metaheuristic techniques were also applied on the AI classifiers. From the comparison between ANN and SVM without optimization by GSA, SVM yields 2% higher accuracy than ANN. However, ANN yields slightly higher accuracy than SVM after combining with GSA, which is in the range of 97%-99% compared to 95%-97% for SVM. On the other hand, GSA-SVM converges faster than GSA-ANN. Overall, it was found that combination of both AI classifiers with GSA yields better results than several well-known metaheuristic techniques.

Matched MeSH terms: Sound
Fulltext Post-Attentive Integration and Topographic Map Distribution During Audiovisual Processing in Dyslexia: A P300 Event-Related Component Analysis

Ali SA, Begum T, Reza MF, Fadzil NA, Mustafar F

Malays J Med Sci, 2020 Jul;27(4):130-138.
PMID: 32863752 DOI: 10.21315/mjms2020.27.4.12

Background: Research on audiovisual post-attentive integration has been carried out using a variety of experimental paradigms and experimental groups but not yet studied in dyslexia. We investigated post-attentive integration and topographic voltage distribution in children with dyslexia by analysing the P300 event-related potential (ERP) component.
Methods: We used a 128-child ERP net for the ERP experiment. Two types of stimuli were presented as either congruent or incongruent stimuli. Congruent stimuli included a matching auditory sound with an animal image, whereas incongruent stimuli included unmatched animal sounds. A total of 24 age-matched children were recruited in the control (n = 12) and dyslexia (n = 12) groups. Children pressed button '1' or '2' when presented with congruent or incongruent stimuli, respectively. The P300 amplitudes and latencies with topographic voltage distribution were analysed for both groups.
Results: The dyslexia group evoked significantly higher P300 amplitudes at the T4 area than the control group. No significant differences were found in cases of P300 latency. Moreover, the dyslexia group demonstrated a higher intensity of P300 voltage distribution in the right parietal and left occipital areas than the control group.
Conclusion: Post-attentive integration for children with dyslexia is higher and that this integration process implicated the parietal and occipital areas.

Matched MeSH terms: Sound
In situ generation of plasma-activated aerosols via surface acoustic wave nebulization for portable spray-based surface bacterial inactivation

Wong KS, Lim WTH, Ooi CW, Yeo LY, Tan MK

Lab Chip, 2020 05 19;20(10):1856-1868.
PMID: 32342089 DOI: 10.1039/d0lc00001a

The presence of reactive species in plasma-activated water is known to induce oxidative stresses in bacterial species, which can result in their inactivation. By integrating a microfludic chipscale nebulizer driven by surface acoustic waves (SAWs) with a low-temperature atmospheric plasma source, we demonstrate an efficient technique for in situ production and application of plasma-activated aerosols for surface disinfection. Unlike bulk conventional systems wherein the water is separately batch-treated within a container, we show in this work the first demonstration of continuous plasma-treatment of water as it is transported through a paper strip from a reservoir onto the chipscale SAW device. The significantly larger surface area to volume ratio of the water within the paper strip leads to a significant reduction in the duration of the plasma-treatment, while maintaining the concentration of the reactive species. The subsequent nebulization of the plasma-activated water by the SAW then allows the generation of plasma-activated aerosols, which can be directly sprayed onto the contaminated surface, therefore eliminating the storage of the plasma-activated water and hence circumventing the typical limitation in conventional systems wherein the concentration of the reactive species diminishes over time during storage, resulting in a reduction in the efficacy of bacterial inactivation. In particular, we show up to 96% reduction in Escherichia coli colonies through direct spraying with the plasma-activated aerosols. This novel, low-cost, portable and energy-efficient hybrid system necessitates only minimal maintenance as it only requires the supply of tap water and battery power for operation, and is thus suitable for decontamination in home environments.

Matched MeSH terms: Sound*
Enhancing greywater treatment via MHz-Order surface acoustic waves

Chan JS, Poh PE, Ismadi MP, Yeo LY, Tan MK

Water Res, 2020 Feb 01;169:115187.
PMID: 31671294 DOI: 10.1016/j.watres.2019.115187

There is a pressing need for efficient biological treatment systems for the removal of organic compounds in greywater given the rapid increase in household wastewater produced as a consequence of rapid urbanisation. Moreover, proper treatment of greywater allows its reuse that can significantly reduce the demand for freshwater supplies. Herein, we demonstrate the possibility of enhancing the removal efficiency of solid contaminants from greywater using MHz-order surface acoustic waves (SAWs). A key distinction of the use of these high frequency surface acoustic waves, compared to previous work on its lower frequency (kHz order) bulk ultrasound counterpart for wastewater treatment, is the absence of cavitation, which can inflict considerable damage on bacteria, thus limiting the intensity and duration, and hence the efficiency enhancement, associated with the acoustic exposure. In particular, we show that up to fivefold improvement in the removal efficiency can be obtained, primarily due to the ability of the acoustic pressure field in homogenizing and reducing the size of bacterial clusters in the sample, therefore providing a larger surface area that promotes greater bacteria digestion. Alternatively, the SAW exposure allows the reduction in the treatment duration to achieve a given level of removal efficiency, thus facilitating higher treatment rates and hence processing throughput. Given the low-cost of the miniature chipscale platform, these promising results highlight its possibility for portable greywater treatment for domestic use or for large-scale industrial wastewater processing through massive parallelization.

Matched MeSH terms: Sound
Fulltext Time frequency analysis of peking gamelan

Sinin Hamdan, Iran Amri Musoddiq, Ahmad Fauzi Musib, Marini Sawawi

Pertanika Journal of Science & Technology, 2020;28(2):441-457.
MyJurnal

The tone of peking 1, 2, 3, 5, 6, 1’ was investigated using time-frequency analysis (TFA). The frequencies were measured using PicoScope oscilloscope, Melda analyzer in Cubase version 9 and Adobe version 3. Three different approaches for time-frequency analysis were used: Fourier spectra (using PicoScope), spectromorphology (using Melda analyzer) and spectrograms (using Adobe). Fourier spectra only identify intensity-frequency within entire signals, while spectromorphology identify the changes of intensity-frequency spectrum at fixed time and Adobe spectrograms identify the frequency with time. PicoScope reading produces the spectra of the fundamental and overtone frequencies in the entire sound. These overtones are non-harmonic since they are non-integral multiples of the fundamental. The fundamental frequencies of peking 1, 2, 3, 5, 6 were 1066Hz (C6), 1178Hz (D6), 1342Hz (E6), 1599Hz (G6) and 1793Hz (A6) respectively while peking 1’was 2123Hz (C7) i.e. one octave higher than peking 1. Melda analyzer reading proved that all peking sustained the initial fundamental frequency and overtone at t=0 until 2s. TFA from Adobe reading provides a description of the sound in the time-frequency plane. From TFA, peking 1, 2 and 6 exhibited a much gentler attack and more rapid decay than peking 3, 5 and 1’.

Matched MeSH terms: Sound
Fulltext Timbre spectrum of gamelan instruments from four Malay gamelan ensembles

Hamdan, Sinin, Ahmad Faudzi Musib, Musoddiq, Iran Amri, Marini Sawawi

Pertanika Journal of Science & Technology, 2020;28(2):459-476.
MyJurnal

Gamelan in general is categorized as a group of gongs. This traditional Malay gamelan ensemble is in a slendro scale i.e. five notes per octave. The rhythms, pitch, duration and loudness classify the various groups of gongs such as bonang, kenong, gender, peking and gambang. The cast bronze peking, kenong and bonang were chosen from a range of Malay gamelan ensemble from Universiti Malaysia Sarawak (UNIMAS), Universiti Putra Malaysia (UPM), Universiti Kebangsaan Malaysia (UKM) and Universiti Teknologi Mara (UiTM). The sounds were recorded by PicoScope Oscilloscope. The PicoScope software displays waveform and spectrum in time and frequency domain respectively. The peking lowest and highest frequencies from UiTM were 293 Hz and 1867 Hz, from UPM were 644 Hz and 1369 Hz, from UKM were 1064 Hz and 2131 Hz and from UNIMAS were 1072 Hz and 2105 Hz respectively. The kenong lowest and highest frequencies from UiTM were 259 Hz and 463 Hz, from UPM were 294 Hz and 543 Hz, from UKM were 300 Hz and 540 Hz and from UNIMAS were 293 Hz and 519 Hz respectively. The fundamental frequencies of bonang from UPM were higher than that of UKM, UiTM and UNIMAS. The harmonics were not successive but interrupted by another frequency. The harmonics of each bonang was similar except for gamelan from UKM.

Matched MeSH terms: Sound
Fulltext THE PERFORMANCE ANALYSIS OF OPTICAL WAVE PROPAGATION FOR UNDERWATER WIRELESS COMMUNICATION

MUHAMMAD SAFIY SABRIL, MUHAMMAD SAFIY SABRIL, FAEZAH JASMAN, NURUL ADILAH ABDUL LATIFF, SEVIA MAHDALIZA IDRUS, WAN HAFIZA WAN HASSAN

UMT Journal of Undergraduate Research, 2020;2(3):73-82.
MyJurnal

Underwater wireless communications refer to transmitting data in an unguided water environment by wireless carriers including acoustic, radio frequency (RF), and optical waves. Relative to acoustic and RF, the optical wave is more promising to offer higher bandwidth at a lower energy consumption rate. However, an optical wave has its challenges such as attenuation due to absorption, scattering and turbulence effects. Therefore, this work attempts to investigate the performance of lightwave propagation for underwater optical wireless communication (UOWC) using simulation and experimental approaches. First, the performance of optical waves was analyzed using MATLAB by simulating the light attenuation model which based on depth-dependent chlorophyll concentration. A depth profile that related to the surface chlorophyll levels for the range 0-4 mg/m3 was used to represent the open ocean. The simulation showed that the attenuation of light less affected for operating wavelength range of 450 – 550 nm. Further, an experimental set-up was developed which consists of a transmitter, receiver, and aquarium to emulate the UOWC channel. Three types of water including clear, sea and cloudy were tested to analyze their interaction with the light emitted by a light-emitting diode (LED) and a laser diode. The emitted light detected by the light sensor and the strength of an audio signal transmitted through the UOWC were measured using a light meter and sound meter respectively. The measured power was plotted against distance and the attenuation constant c was deduced through curve fitting method. The analysis showed irrespective of the light sources, UOWC in cloudy water suffered the highest attenuation relative to still clear and seawater. The received power emitted by laser was at least 41% higher than the LED. This study contributes to identify the potential and limitations of different operating schemes to optimize UOWC performance.

Matched MeSH terms: Sound
Lamb to Rayleigh Wave Conversion on Superstrates as a Means to Facilitate Disposable Acoustomicrofluidic Applications

Wong KS, Lee L, Hung YM, Yeo LY, Tan MK

Anal Chem, 2019 10 01;91(19):12358-12368.
PMID: 31500406 DOI: 10.1021/acs.analchem.9b02850

Rayleigh surface acoustic waves (SAWs) have been demonstrated as a powerful and effective means for driving a wide range of microfluidic actuation processes. Traditionally, SAWs have been generated on piezoelectric substrates, although the cost of the material and the electrode deposition process makes them less amenable as low-cost and disposable components. As such, a "razor-and-blades" model that couples the acoustic energy of the SAW on the piezoelectric substrate through a fluid coupling layer and into a low-cost and, hence, disposable silicon superstrate on which various microfluidic processes can be conducted has been proposed. Nevertheless, it was shown that only bulk vibration in the form of Lamb waves can be excited in the superstrate, which is considerably less efficient and flexible in terms of microfluidic functionality compared to its surface counterpart, that is, the SAW. Here, we reveal an extremely simple way that quite unexpectedly and rather nonintuitively allows SAWs to be generated on the superstrate-by coating the superstrate with a thin gold layer. In addition to verifying the existence of the SAW on the coated superstrate, we carry out finite-difference time domain numerical simulations that not only confirm the experimental observations but also facilitate an understanding of the surprising difference that the coating makes. Finally, we elucidate the various power-dependent particle concentration phenomena that can be carried out in a sessile droplet atop the superstrate and show the possibility for simply carrying out rapid and effective microcentrifugation-a process that is considerably more difficult with Lamb wave excitation on the superstrate.

Matched MeSH terms: Sound
Whistles emitted by Indo-Pacific humpback dolphins (Sousa chinensis) in Zhanjiang waters, China

Dong L, Caruso F, Lin M, Liu M, Gong Z, Dong J, et al.

J Acoust Soc Am, 2019 06;145(6):3289.
PMID: 31255103 DOI: 10.1121/1.5110304

Whistles emitted by Indo-Pacific humpback dolphins in Zhanjiang waters, China, were collected by using autonomous acoustic recorders. A total of 529 whistles with clear contours and signal-to-noise ratio higher than 10 dB were extracted for analysis. The fundamental frequencies and durations of analyzed whistles were in ranges of 1785-21 675 Hz and 30-1973 ms, respectively. Six tonal types were identified: constant, downsweep, upsweep, concave, convex, and sine whistles. Constant type was the most dominant tonal type, accounting for 32.51% of all whistles, followed by sine type, accounting for 19.66% of all whistles. This paper examined 17 whistle parameters, which showed significant differences among the six tonal types. Whistles without inflections, gaps, and stairs accounted for 62.6%, 80.6%, and 68.6% of all whistles, respectively. Significant intraspecific differences in all duration and frequency parameters of dolphin whistles were found between this study and the study in Malaysia. Except for start frequency, maximum frequency and the number of harmonics, all whistle parameters showed significant differences between this study and the study conducted in Sanniang Bay, China. The intraspecific differences in vocalizations for this species may be related to macro-geographic and/or environmental variations among waters, suggesting a potential geographic isolation among populations of Indo-Pacific humpback dolphins.

Matched MeSH terms: Sound Spectrography/methods
The electronic song "Scary Monsters and Nice Sprites" reduces host attack and mating success in the dengue vector Aedes aegypti

Dieng H, The CC, Satho T, Miake F, Wydiamala E, Kassim NFA, et al.

Acta Trop, 2019 Jun;194:93-99.
PMID: 30922800 DOI: 10.1016/j.actatropica.2019.03.027

Sound and its reception are crucial for reproduction, survival, and population maintenance of many animals. In insects, low-frequency vibrations facilitate sexual interactions, whereas noise disrupts the perception of signals from conspecifics and hosts. Despite evidence that mosquitoes respond to sound frequencies beyond fundamental ranges, including songs, and that males and females need to struggle to harmonize their flight tones, the behavioral impacts of music as control targets remain unexplored. In this study, we examined the effects of electronic music (Scary Monsters and Nice Sprites by Skrillex) on foraging, host attack, and sexual activities of the dengue vector Aedes aegypti. Adults were presented with two sound environments (music-off or music-on). Discrepancies in visitation, blood feeding, and copulation patterns were compared between environments with and without music. Ae. aegypti females maintained in the music-off environment initiated host visits earlier than those in the music-on environment. They visited the host significantly less often in the music-on than the music-off condition. Females exposed to music attacked hosts much later than their non-exposed peers. The occurrence of blood feeding activity was lower when music was being played. Adults exposed to music copulated far less often than their counterparts kept in an environment where there was no music. In addition to providing insight into the auditory sensitivity of Ae. aegypti to sound, our results indicated the vulnerability of its key vectorial capacity traits to electronic music. The observation that such music can delay host attack, reduce blood feeding, and disrupt mating provides new avenues for the development of music-based personal protective and control measures against Aedes-borne diseases.

Matched MeSH terms: Sound
Fulltext Aquifer Potential Assessment in Termites Manifested Locales Using Geo-Electrical and Surface Hydraulic Measurement Parameters

Ahmed Ii JB, Pradhan B, Mansor S, Yusoff ZM, Ekpo SA

Sensors (Basel), 2019 May 07;19(9).
PMID: 31067734 DOI: 10.3390/s19092107

In some parts of tropical Africa, termite mound locations are traditionally used to site groundwater structures mainly in the form of hand-dug wells with high success rates. However, the scientific rationale behind the use of mounds as prospective sites for locating groundwater structures has not been thoroughly investigated. In this paper, locations and structural features of termite mounds were mapped with the aim of determining the aquifer potential beneath termite mounds and comparing the same with adjacent areas, 10 m away. Soil and species sampling, field surveys and laboratory analyses to obtain data on physical, hydraulic and geo-electrical parameters from termite mounds and adjacent control areas followed. The physical and hydraulic measurements demonstrated relatively higher infiltration rates and lower soil water content on mound soils compared with the surrounding areas. To assess the aquifer potential, vertical electrical soundings were conducted on 28 termite mounds sites and adjacent control areas. Three (3) important parameters were assessed to compute potential weights for each Vertical Electrical Sounding (VES) point: Depth to bedrock, aquifer layer resistivity and fresh/fractured bedrock resistivity. These weights were then compared between those of termite mound sites and those from control areas. The result revealed that about 43% of mound sites have greater aquifer potential compared to the surrounding areas, whereas 28.5% of mounds have equal and lower potentials compared with the surrounding areas. The study concludes that termite mounds locations are suitable spots for groundwater prospecting owing to the deeper regolith layer beneath them which suggests that termites either have the ability to locate places with a deeper weathering horizon or are themselves agents of biological weathering. Further studies to check how representative our study area is of other areas with similar termite activities are recommended.

Matched MeSH terms: Sound
An in-depth review of the methods, findings, and theories associated with odor-evoked autobiographical memory

Hackländer RPM, Janssen SMJ, Bermeitinger C

Psychon Bull Rev, 2019 Apr;26(2):401-429.
PMID: 30406397 DOI: 10.3758/s13423-018-1545-3

Over the past nearly 35 years, there has been sporadic interest in what has commonly come to be known as the Proust phenomenon, whereby autobiographical memories are retrieved and experienced differently when evoked by odors as compared with other types of cues, such as words, images or sounds. The purpose of this review is threefold. First, we provide a detailed analysis of the methods used to investigate Proust effects. Second, we review and analyze the various findings from the literature and determine what we feel to be the most important and stable findings. Third, we provide a series of previously postulated and new hypotheses that attempt to account for the various findings. Given the early stage of research, the current review aims to provide a measure of organization to the field, as well serve as a guide for how future investigations may address the topic. We conclude with the recommendation that research in this area shift its focus from establishing the phenomenon towards explaining its causes.

Matched MeSH terms: Sound
Fulltext Validity and Reliability Aspects of a Newly Developed Questionnaire for Auditory Localization

Zakaria MN

J Int Adv Otol, 2019 Apr;15(1):182-183.
PMID: 30924773 DOI: 10.5152/iao.2019.5959
Matched MeSH terms: Sound Localization/physiology*

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links