Displaying publications 1 - 20 of 75 in total

Abstract:
Sort:
  1. Fulltext Synthesis and characterization of silver/montmorillonite/chitosan bionanocomposites by chemical reduction method and their antibacterial activity
    Shameli K, Bin Ahmad M, Zargar M, Yunus WM, Ibrahim NA, Shabanzadeh P, et al.
    Int J Nanomedicine, 2011;6:271-84.
    PMID: 21499424 DOI: 10.2147/IJN.S16043
    Silver nanoparticles (AgNPs) of a small size were successfully synthesized using the wet chemical reduction method into the lamellar space layer of montmorillonite/chitosan (MMT/Cts) as an organomodified mineral solid support in the absence of any heat treatment. AgNO3, MMT, Cts, and NaBH4 were used as the silver precursor, the solid support, the natural polymeric stabilizer, and the chemical reduction agent, respectively. MMT was suspended in aqueous AgNO3/Cts solution. The interlamellar space limits were changed (d-spacing = 1.24-1.54 nm); therefore, AgNPs formed on the interlayer and external surface of MMT/Cts with d-average = 6.28-9.84 nm diameter. Characterizations were done using different methods, ie, ultraviolet-visible spectroscopy, powder X-ray diffraction, transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray fluorescence spectrometry, and Fourier transform infrared spectroscopy. Silver/montmorillonite/chitosan bionanocomposite (Ag/MMT/Cts BNC) systems were examined. The antibacterial activity of AgNPs in MMT/Cts was investigated against Gram-positive bacteria, ie, Staphylococcus aureus and methicillin-resistant S. aureus and Gram-negative bacteria, ie, Escherichia coli, E. coli O157:H7, and Pseudomonas aeruginosa by the disc diffusion method using Mueller Hinton agar at different sizes of AgNPs. All of the synthesized Ag/MMT/Cts BNCs were found to have high antibacterial activity. These results show that Ag/MMT/Cts BNCs can be useful in different biological research and biomedical applications, including surgical devices and drug delivery vehicles.
    Matched MeSH terms: Spectrophotometry, Atomic
  2. Fulltext Iodine intake and status during pregnancy and lactation before and after government initiatives to improve iodine status, in Palmerston North, New Zealand: a pilot study
    Brough L, Jin Y, Shukri NH, Wharemate ZR, Weber JL, Coad J
    Matern Child Nutr, 2015 Oct;11(4):646-55.
    PMID: 23782592 DOI: 10.1111/mcn.12055
    Iodine deficiency during pregnancy and lactation may adversely affect fetal and infant development. Two initiatives were introduced in New Zealand to prevent deficiency: (1) mandatory fortification of bread with iodised salt; and (2) provision of a subsidised iodine supplement (150 μg) for all pregnant and breastfeeding women. The aim of this study was to assess iodine intake and status among a self-selecting sample of pregnant and lactating women in Palmerston North, both before and after the two initiatives. Pregnant and breastfeeding women were recruited before (n = 25 and 32; 2009) and after (n = 34 and 36; 2011) the initiatives. Iodine concentration was determined in 24-h urine and breast milk samples using inductively-coupled plasma mass spectrometry. Use of supplements and salt, knowledge of iodine deficiency, and awareness of the initiatives were determined by questionnaire. Median urine iodine concentration (UIC) was higher in 2011 compared with 2009 for both pregnant (85 and 47 μg L(-1) ) and breastfeeding (74 and 34 μg L(-1) ) participants; median UIC were below the cut-offs for adequate iodine status. However, in 2011, the estimated daily iodine intake during pregnancy was 217 μg day(-1) ; 74% of women achieved the Estimated Average Requirement. Knowledge of the initiatives was low, only 28-56% were aware of the need for iodine supplements and only 15-22% were aware of the mandatory addition of iodised salt to bread. Despite initiatives, UIC of these women indicates iodine deficiency, however, dietary intakes appear adequate. Ongoing surveillance of supplement use and iodine status among pregnant and lactating women throughout New Zealand is needed to fully assess the efficacy of the initiatives. Alternative strategies may require evaluation to ensure all women have adequate iodine during pregnancy and breastfeeding.
    Matched MeSH terms: Spectrophotometry, Atomic
  3. Correlation of Arsenic Levels in Smokeless Tobacco Products and Biological Samples of Oral Cancer Patients and Control Consumers
    Arain SS, Kazi TG, Afridi HI, Talpur FN, Kazi AG, Brahman KD, et al.
    Biol Trace Elem Res, 2015 Dec;168(2):287-95.
    PMID: 25975948 DOI: 10.1007/s12011-015-0355-y
    It has been extensively reported that chewing of smokeless tobacco (SLT) can lead to cancers of oral cavity. In present study, the relationship between arsenic (As) exposure via chewing/inhaling different SLT products in oral cancer patients have or/not consumed SLT products was studied. The As in different types of SLT products (gutkha, mainpuri, and snuff) and biological (scalp hair and blood) samples of different types of oral cancer patients and controls were analyzed. Both controls and oral cancer patients have same age group (ranged 30-60 years), socio-economic status, localities, and dietary habits. The concentrations of As in SLT products and biological samples were measured by electrothermal atomic absorption spectrophotometer after microwave-assisted acid digestion. The validity and accuracy of the methodology were checked by certified reference materials. The resulted data of present study indicates that the concentration of As was significantly higher in scalp hair and blood samples of oral cancer patients than those of controls (p<0.001). It was also observed that the values of As were two- to threefolds higher in biological samples of controls subjects, consuming SLT products as compared to those have none of these habits (p>0.01). The intake of As via consuming different SLT may have synergistic effects, in addition to other risk factors associated with oral cancer.
    Matched MeSH terms: Spectrophotometry, Atomic
  4. Understanding selected trace elements behavior in a coal-fired power plant in Malaysia for assessment of abatement technologies
    Mokhtar MM, Taib RM, Hassim MH
    J Air Waste Manag Assoc, 2014 Aug;64(8):867-78.
    PMID: 25185389
    The Proposed New Environmental Quality (Clean Air) Regulation 201X (Draft), which replaces the Malaysia Environmental Quality (Clean Air) 1978, specifies limits to additional pollutants from power generation using fossil fuel. The new pollutants include Hg, HCl, and HF with limits of 0.03, 100, and 15 mg/N-m3 at 6% O2, respectively. These pollutants are normally present in very small concentrations (known as trace elements [TEs]), and hence are often neglected in environmental air quality monitoring in Malaysia. Following the enactment of the new regulation, it is now imperative to understand the TEs behavior and to assess the capability of the existing abatement technologies to comply with the new emission limits. This paper presents the comparison of TEs behavior of the most volatile (Hg, Cl, F) and less volatile (As, Be, Cd, Cr, Ni, Se, Pb) elements in subbituminous and bituminous coal and coal combustion products (CCP) (i.e., fly ash and bottom ash) from separate firing of subbituminous and bituminous coal in a coal-fired power plant in Malaysia. The effect of air pollution control devices configuration in removal of TEs was also investigated to evaluate the effectiveness of abatement technologies used in the plant. This study showed that subbituminous and bituminous coals and their CCPs have different TEs behavior. It is speculated that ash content could be a factor for such diverse behavior In addition, the type of coal and the concentrations of TEs in feed coal were to some extent influenced by the emission of TEs in flue gas. The electrostatic precipitator (ESP) and seawater flue gas desulfurization (FGD) used in the studied coal-fired power plant were found effective in removing TEs in particulate and vapor form, respectively, as well as complying with the new specified emission limits. Implications: Coals used by power plants in Peninsular Malaysia come from the same supplier (Tenaga Nasional Berhad Fuel Services), which is a subsidiary of the Malaysia electricity provider (Tenaga Nasional Berhad). Therefore, this study on trace elements behavior in a coal-fired power plant in Malaysia could represent emission from other plants in Peninsular Malaysia. By adhering to the current coal specifications and installation of electrostatic precipitator (ESP) and flue gas desulfurization, the plants could comply with the limits specified in the Malaysian Department of Environment (DOE) Scheduled Waste Guideline for bottom ash and fly ash and the Proposed New Environmental Quality (Clean Air) Regulation 201X (Draft).
    Matched MeSH terms: Spectrophotometry, Atomic
  5. Fulltext Application of polypyrrole multi-walled carbon nanotube composite layer for detection of mercury, lead and iron ions using surface plasmon resonance technique
    Sadrolhosseini AR, Noor AS, Bahrami A, Lim HN, Talib ZA, Mahdi MA
    PLoS One, 2014;9(4):e93962.
    PMID: 24733263 DOI: 10.1371/journal.pone.0093962
    Polypyrrole multi-walled carbon nanotube composite layers were used to modify the gold layer to measure heavy metal ions using the surface plasmon resonance technique. The new sensor was fabricated to detect trace amounts of mercury (Hg), lead (Pb), and iron (Fe) ions. In the present research, the sensitivity of a polypyrrole multi-walled carbon nanotube composite layer and a polypyrrole layer were compared. The application of polypyrrole multi-walled carbon nanotubes enhanced the sensitivity and accuracy of the sensor for detecting ions in an aqueous solution due to the binding of mercury, lead, and iron ions to the sensing layer. The Hg ion bonded to the sensing layer more strongly than did the Pb and Fe ions. The limitation of the sensor was calculated to be about 0.1 ppm, which produced an angle shift in the region of 0.3° to 0.6°.
    Matched MeSH terms: Spectrophotometry, Atomic
  6. An assessment of heavy metal bioaccumulation in Asian swamp eel, Monopterus albus, during plowing stages of a paddy cycle
    Sow AY, Ismail A, Zulkifli SZ
    Bull Environ Contam Toxicol, 2013 Jul;91(1):6-12.
    PMID: 23666324 DOI: 10.1007/s00128-013-1009-4
    Livers and muscles of swamp eels (Monopterus albus) were analyzed for bioaccumulation of heavy metals during the plowing stage of a paddy cycle. Results showed heavy metals were bioaccumulated more highly in liver than muscle. Zinc (Zn) was the highest bioaccumulated metal in liver (98.5 ± 8.95 μg/g) and in muscle (48.8 ± 7.17 μg/g). The lowest bioaccumulated metals were cadmium (Cd) in liver (3.44 ± 2.42 μg/g) and copper (Cu) in muscle (0.65 ± 0.20 μg/g). In sediments, Zn was present at the highest mean concentration (52.7 ± 2.85 μg/g), while Cd had the lowest mean concentration (1.04 ± 0.24 μg/g). The biota-sediment accumulation factor (BSAF) for Cu, Zn, Cd and nickel (Ni) in liver tissue was greater than the corresponding BSAF for muscle tissue. For the three plowing stages, metal concentrations were significantly correlated between liver and muscle tissues in all cases, and between sediment and either liver or muscle in most cases. Mean measured metal concentrations in muscle tissue were below the maximum permissible limits established by Malaysian and U.S. governmental agencies, and were therefore regarded as safe for human consumption.
    Matched MeSH terms: Spectrophotometry, Atomic
  7. Human exposure assessment of silver and copper migrating from an antimicrobial nanocoated packaging material into an acidic food simulant
    Hannon JC, Kerry JP, Cruz-Romero M, Azlin-Hasim S, Morris M, Cummins E
    Food Chem Toxicol, 2016 Sep;95:128-36.
    PMID: 27402098 DOI: 10.1016/j.fct.2016.07.004
    To examine the human exposure to a novel silver and copper nanoparticle (AgNP and CuNP)/polystyrene-polyethylene oxide block copolymer (PS-b-PEO) food packaging coating, the migration of Ag and Cu into 3% acetic acid (3% HAc) food simulant was assessed at 60 °C for 10 days. Significantly lower migration was observed for Ag (0.46 mg/kg food) compared to Cu (0.82 mg/kg food) measured by inductively coupled plasma - atomic emission spectrometry (ICP-AES). In addition, no distinct population of AgNPs or CuNPs were observed in 3% HAc by nanoparticle tracking analysis (NTA) and transmission electron microscopy (TEM). The predicted human exposure to Ag and Cu was used to calculate a margin of exposure (MOE) for ionic species of Ag and Cu, which indicated the safe use of the food packaging in a hypothetical scenario (e.g. as fruit juice packaging). While migration exceeded regulatory limits, the calculated MOE suggests current migration limits may be conservative for specific nano-packaging applications.
    Matched MeSH terms: Spectrophotometry, Atomic
  8. Fulltext In vitro antiplasmodial activity, macronutrients and trace metals in the medicinal plants: Phyllanthus spp. and Alpinia conchigera Griff
    Haslinda MS, Aiyub Z, Bakar NK, Tohar N, Musa Y, Abdullah NR, et al.
    Trop Biomed, 2015 Mar;32(1):129-39.
    PMID: 25801263
    An antiplasmodial screening of Phyllanthus debilis and Phyllanthus urinaria was carried out. The medicinal plants were extracted and evaluated for in vitro antiplasmodial activity against D10 (chloroquine-sensitive, CQS) and Gombak A (chloroquine-resistant, CQR) strains of Plasmodium falciparum. The methanolic crudes from the soxhlet extraction were active against both strains however, P. urinaria (IC50 8.9 μg/ml with CQR strain) exhibited better anti-malarial activity compared to P. debilis (IC50 12.2 μg/ml with CQR strain). Furthermore, the methanolic crude of P. urinaria obtained by the cold extraction has good anti-malarial activity towards CQS (IC50 4.1 μg/ml). The concentration of macronutrients (calcium and magnesium) and trace metals (copper, manganese, iron and zinc) from three Phyllanthus species i.e. P. debilis Klein ex Wild., Phyllanthus niruri L., P. urinaria L. and Alpinia conchigera Griff. were determined using microwave digestion method and analyzed by Flame Atomic Absorption Spectroscopy. Standard Reference Material 1547 (peach leaves) was used to validate the method throughout this study. The recovery values were in the range of 80% to 120% which were in very good agreement with the certified values. The three Phyllanthus species and leaves of A. conchigera showed the highest concentration of calcium compared to other metals and macronutrients studied. The significant presence of all the important macronutrients and trace metals which are essential for human health and well-being substantiate their use medicinally in traditional practices.
    Matched MeSH terms: Spectrophotometry, Atomic
  9. Salivary trace elements in relation to dental caries in a group of multi-ethnic schoolchildren in Shah Alam, Malaysia
    Hussein AS, Ghasheer HF, Ramli NM, Schroth RJ, Abu-Hassan MI
    Eur J Paediatr Dent, 2013 Jun;14(2):113-8.
    PMID: 23758460
    AIM: To assess the salivary levels of Copper (Cu), Zinc (Zn), Manganese (Mn) and Iron (Fe) obtained from children of different ethnic backgrounds in Shah Alam, Malaysia and investigate the possible relationships with caries.

    MATERIALS AND METHODS: One hundred and twenty primary school children were included. They were divided into caries and caries-free groups. Unstimulated whole saliva was collected from each participant using spitting method. The salivary elements were measured using an Atomic Absorption Spectrophotometer. Descriptive statistics, bivariate and Pearson's correlation analysis were performed.

    RESULTS: Salivary Cu and Zn levels were significantly higher in children with dental caries compared to those caries-free (p < 0.05). Moreover, these elements had a positive correlation with dental caries (Cu: r=0.698, p<0.001; Zn: r=0.181, p<0.05). No significant variations in Mn and Fe were observed between caries and caries-free group (p>0.05). Additionally, there were significant differences in salivary Zn and Fe among different age groups (p<0.05) and highly significant differences in salivary Cu, Mn and Fe among different ethnic groups (p<0.001). However, all elements exhibited no significant differences between males and females.

    CONCLUSION: The salivary Cu and Zn levels showed significant differences between caries and caries-free groups. The findings also revealed significant variations in the levels of salivary Cu, Mn and Fe among different ethnic groups and salivary Zn and Fe among different age groups.

    Matched MeSH terms: Spectrophotometry, Atomic
  10. Fulltext Titanium (III) cation selective electrode based on synthesized tris(2pyridyl) methylamine ionophore and its application in water samples
    Rezayi M, Karazhian R, Abdollahi Y, Narimani L, Sany SB, Ahmadzadeh S, et al.
    Sci Rep, 2014;4:4664.
    PMID: 24722576 DOI: 10.1038/srep04664
    The introduction of low detection limit ion selective electrodes (ISEs) may well pave the way for the determination of trace targets of cationic compounds. This research focuses on the detection of titanium (III) cation using a new PVC-membrane sensor based on synthesized tris(2pyridyl) methylamine (tpm) ionophore. The application and validation of the proposed sensor was done using potentiometric titration, inductively coupled plasma atomic emission spectrometry (ICP-AES), and atomic absorption spectrometry (AAS). The membrane sensor exhibited a Nernstian response to the titanium (III) cation over a concentration range of 1.0 × 10(-6)-1.0 × 10(-2) M and pH range from 1-2.5. The Nernstian slope, the lower of detection (LOD), and the response time (t95%) of the proposed sensor were 29.17 ± 0.24 mV/dec, 7.9 × 10-7 M, and 20 s, respectively. The direct determination of 4-39 μg/ml of titanium (III) standard solution showed an average recovery of 94.60 and a mean relative standard deviation of 1.8 at 100.0 μg/ml. Finally, the utilization of the electrodes as end-point indicators for potentiometric titration with EDTA solutions for titanium (III) sensor was successfully carried out.
    Matched MeSH terms: Spectrophotometry, Atomic
  11. Development of an inhibitive assay using commercial Electrophorus electricus acetylcholinesterase for heavy metal detection
    Shukor MY, Tham LG, Halmi MI, Khalid I, Begum G, Syed MA
    J Environ Biol, 2013 Sep;34(5):967-70.
    PMID: 24558814
    Near-real-ime assay is anassay method that the whole process from sampling until results could be obtained in approximately Iess than one hour. The ElIman assay for acetyl cholinesterase (AChE) has near real-time potential due to its simplicity and fast assay time. The commercial acetylcholinesterase from Electrophorus electricus is well known for its uses in insecticides detection. A lesser known fact is AChE is also sensitive to heavy metals. A near real-time inhibitive assay for heavy metals using AChE from this source showed promising results. Several heavy metals such as copper, silver and mercury could be etected with IC50 values of1.212, 0.1185 and 0.097 mg I-1, respectively. The Limits of Detection (LOD) for copper, silver and mercury were 0.01, 0.015 and 0.01 mg I-1, respectively. TheLimits of quantitation (LOQ) or copper, silver and mercury were 0.196, 0.112 and 0.025 mg I-1, respectively. The LOQvalues for copper, silver and mercury were well below the maximum permissible limit for these metal ions as outlined by Malaysian Department of Environment. A polluted location demonstrated near real-time applicability of the assay with variation oftemporal levels of heavy metals detected. The results show that AChE from Electrophorus electricus has the potential to be used as a near real-time biomonitoring tool for heavy
    Matched MeSH terms: Spectrophotometry, Atomic
  12. Fulltext Evaluation of factors influencing the groundwater chemistry in a small tropical island of Malaysia
    Kura NU, Ramli MF, Sulaiman WN, Ibrahim S, Aris AZ, Mustapha A
    Int J Environ Res Public Health, 2013 May;10(5):1861-81.
    PMID: 23648442 DOI: 10.3390/ijerph10051861
    Groundwater chemistry of small tropical islands is influenced by many factors, such as recharge, weathering and seawater intrusion, among others, which interact with each other in a very complex way. In this work, multivariate statistical analysis was used to evaluate the factors controlling the groundwater chemistry of Kapas Island (Malaysia). Principal component analysis (PCA) was applied to 17 hydrochemical parameters from 108 groundwater samples obtained from 18 sampling sites. PCA extracted four PCs, namely seawater intrusion, redox reaction, anthropogenic pollution and weather factors, which collectively were responsible for more than 87% of the total variance of the island's hydrochemistry. The cluster analysis indicated that three factors (weather, redox reaction and seawater intrusion) controlled the hydrochemistry of the area, and the variables were allocated to three groups based on similarity. A Piper diagram classified the island's water types into Ca-HCO3 water type, Na-HCO3 water type, Na-SO4-Cl water type and Na-Cl water type, indicating recharge, mixed, weathering and leached from sewage and seawater intrusion, respectively. This work will provide policy makers and land managers with knowledge of the precise water quality problems affecting the island and can also serve as a guide for hydrochemistry assessments of other islands that share similar characteristics with the island in question.
    Matched MeSH terms: Spectrophotometry, Atomic
  13. Multivariate and Geoaccumulation Index evaluation in mangrove surface sediment of Mengkabong lagoon, Sabah
    Praveena SM, Ahmed A, Radojevic M, Abdullah MH, Aris AZ
    Bull Environ Contam Toxicol, 2008 Jul;81(1):52-6.
    PMID: 18506379 DOI: 10.1007/s00128-008-9460-3
    Spatial variations in estuarine intertidal sediment have been often related to such environmental variables as salinity, sediment types, heavy metals and base cations. However, there have been few attempts to investigate the difference condition between high and low tides relationships and to predict their likely responses in an estuarine environment. This paper investigates the linkages between environmental variables and tides of estuarine intertidal sediment in order to provide a basis for describing the effect of tides in the Mengkabong lagoon, Sabah. Multivariate statistical technique, principal components analysis (PCA) was employed to better interpret information about the sediment and its controlling factors in the intertidal zone. The calculation of Geoaccumulation Index (I(geo)) suggests the Mengkabong mangrove sediments are having background concentrations for Al, Cu, Fe, and Zn and unpolluted for Pb. Extra efforts should therefore pay attention to understand the mechanisms and quantification of different pathways of exchange within and between intertidal zones.
    Matched MeSH terms: Spectrophotometry, Atomic
  14. The lead content of currently available new residential paint in several Asian countries
    Clark CS, Rampal KG, Thuppil V, Chen CK, Clark R, Roda S
    Environ Res, 2006 Sep;102(1):9-12.
    PMID: 16782088
    Worldwide prohibitions on lead gasoline additives were a major international public health accomplishment, the results of which are still being documented in parts of the world. Although the need to remove lead from paints has been recognized for over a century, evidence reported in this article indicates that lead-based paints for household use, some containing more than 10% lead, are readily available for purchase in some of the largest countries in the world. Sixty-six percent of new paint samples from China, India, and Malaysia were found to contain 5000 ppm (0.5%) or more of lead, the US definition of lead-based paint in existing housing, and 78% contained 600 ppm (0.06%) or more, the limit for new paints. In contrast, the comparable levels in a nearby developed country, Singapore, were 0% and 9%. In examining lead levels in paints of the same brands purchased in different countries, it was found that some brands had lead-based paints in one of the countries and paints meeting US limits in another; another had lead-free paint available in all countries where samples were obtained. Lead-based paints have already poisoned millions of children and likely will cause similar damage in the future as paint use increases as countries in Asia and elsewhere continue their rapid development. The ready availability of lead-based paints documented in this article provides stark evidence of the urgent need for efforts to accomplish an effective worldwide ban on the use of lead in paint.
    Matched MeSH terms: Spectrophotometry, Atomic
  15. Optimisation of digestion method for determination of arsenic in shrimp paste sample using atomic absorption spectrometry
    Ngah CW, Yahya MA
    Food Chem, 2012 Oct 15;134(4):2406-10.
    PMID: 23442702 DOI: 10.1016/j.foodchem.2012.04.032
    The microwave digestion method was developed and verified for the determination of arsenic in shrimp paste samples. Experimental design for five factors (HNO(3) and H(2)O(2) volumes, sample weight, microwave power and digestion time) were used for the optimisation of sample digestion. For this purpose, two level half factorial design, which involves 16 experiments, was adopted. The concentration of arsenic was analysed by graphite furnace atomic absorption spectrometry. Design Expert® 7.0 software was used to interpret all data obtained. The combination of 2 mL HNO(3) and 1 mL H(2)O(2) volumes, 0.1g sample weight, 1400 W power and 5 min digestion time was found to be the optimum parameters required to digest the shrimp paste samples. Tests with spiked samples presented good recoveries with relative standard deviations between 0.32% and 5.35%.
    Matched MeSH terms: Spectrophotometry, Atomic
  16. Phytoremediation of iron from red soil of tropical region by using Centella asiatica
    Bhat IU, Mauris EN, Khanam Z
    Int J Phytoremediation, 2016 Sep;18(9):918-23.
    PMID: 26940261 DOI: 10.1080/15226514.2016.1156637
    The accumulation and removal efficiency of Fe by Centella asiatica was carried out at various Fe concentrations in soil treatments (0, 50, 100, 150 and 200 mg Fe/kg soil). Iron accumulation in different parts of C. asiatica (leaf, stem and root) was analyzed by atomic absorption spectrophotometer (AAS). Factorial experiment with a completely randomized design and Duncan's test were used for data analyses. The results revealed that C. asiatica have the ability to uptake and accumulate Fe significantly (p 1 and <1, respectively, further supporting its metal hyperaccumulator properties.
    Matched MeSH terms: Spectrophotometry, Atomic
  17. The concentration of selected minerals and phytate in Malaysian Brachiaria decumbens
    Noordin MM, Zhang SS, Rahman SO, Haron J
    Vet Hum Toxicol, 2000 Oct;42(5):276-9.
    PMID: 11003117
    Samples of Brachiaria decumbens collected from 5 farms representing the Peninsular Malaysia were subjected to selected trace mineral and phytate analyses to explain the pathogenesis of B decumbens intoxication. Concentrations of Cu, Zn, Fe and Mo were comparable to other grasses while that of phytate was low. The molar ratios of Cu:Zn, Cu:Mo, and Cu:Fe warrant that Cu deficiency is involved in the toxicity of B decumbens. This might aggravate the development of photosensitization of unpigmented or lightly pigmented areas of affected animals. The Zn:phytate ratio could predispose to Zn deficiency during intoxication.
    Matched MeSH terms: Spectrophotometry, Atomic
  18. The accumulation and distribution of trace metals in some localized marine species
    Yusof AM, Rahman NA, Wood AK
    Biol Trace Elem Res, 1994;43-45:239-49.
    PMID: 7710833
    Trace elements, such as As, Co, Cr, Hg, Sb, and Zn, were determined by neutron activation analysis (NAA), whereas Cd, Cu, and Pb were determined by graphite furnace atomic absorption spectroscopy (GFAAS) in clam, crab, prawn, swamp cerith, and mussel samples after digestion by microwave heating under controlled conditions before eluting the solutions through a column of a chelating resin, Chelex-100. The standard used in the determination of percentage volatile elements retained by microwave digestion and also in the activation process was Lobster Hepatopancreas TORT-1, whereas known mixed standards were prepared from nitrate salts to determine the efficiency of the separation procedure at a controlled pH. Mercury and lead detected in crabs exceeded the maximum permissible level. Some species also showed a high affinity toward certain elements, and their levels of accumulation in the tissues of these species corresponded with the concentration of these elements in sediments, especially at sites in the vicinity of an industrial zone.
    Matched MeSH terms: Spectrophotometry, Atomic
  19. Effects of salinity and pre-exposure on acute cadmium toxicity to seabass, Lates calcarifer
    Shazili NA
    Bull Environ Contam Toxicol, 1995 Jan;54(1):22-8.
    PMID: 7756781
    Matched MeSH terms: Spectrophotometry, Atomic
  20. Verifying measurements of residual calcium content in demineralised cortical bone
    Ariffin AF, Yusof N, Mohd S, Rahman SA, Ramalingam S, Mansor A, et al.
    Cell Tissue Bank, 2019 Dec;20(4):527-534.
    PMID: 31456097 DOI: 10.1007/s10561-019-09785-4
    Calcium contents of demineralised human cortical bone determined by titrimetric assay and atomic absorption spectrophotometry technique were verified by comparing to neutron activation analysis which has high recovery of more than 90%. Conversion factors determined from the comparison is necessary to correct the calcium content for each technique. Femurs from cadaveric donors were cut into cortical rings and demineralised in 0.5 M hydrochloric acid for varying immersion times. Initial calcium content in the cortical bone measured by titration was 4.57%, only 21% of the measurement by neutron activation analysis; while measured by atomic absorption spectrophotometer was 13.4%, only 61% of neutron activation analysis. By comparing more readings with the measurements by neutron activation analysis with 93% recovery, a conversion factor of 4.83 was verified and applied for the readings by titration and 1.45 for atomic absorption spectrophotometer in calculating the correct calcium contents. The residual calcium content started to reduce after the cortical bone was demineralised in hydrochloric acid for 8 h and reduced to 13% after 24 h. Using the linear relationship, the residual calcium content could be reduced to less than 8% after immersion in hydrochloric acid for 40 h. Atomic absorption spectrophotometry technique is the method of choice for calcium content determination as it is more reliable compared to titrimetric assay.
    Matched MeSH terms: Spectrophotometry, Atomic
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links