MyMedR

Displaying all 15 publications

Abstract:

Sort:

Fulltext Production and Status of Bacterial Cellulose in Biomedical Engineering

Moniri M, Boroumand Moghaddam A, Azizi S, Abdul Rahim R, Bin Ariff A, Zuhainis Saad W, et al.

Nanomaterials (Basel), 2017 Sep 04;7(9).
PMID: 32962322 DOI: 10.3390/nano7090257

Bacterial cellulose (BC) is a highly pure and crystalline material generated by aerobic bacteria, which has received significant interest due to its unique physiochemical characteristics in comparison with plant cellulose. BC, alone or in combination with different components (e.g., biopolymers and nanoparticles), can be used for a wide range of applications, such as medical products, electrical instruments, and food ingredients. In recent years, biomedical devices have gained important attention due to the increase in medical engineering products for wound care, regeneration of organs, diagnosis of diseases, and drug transportation. Bacterial cellulose has potential applications across several medical sectors and permits the development of innovative materials. This paper reviews the progress of related research, including overall information about bacterial cellulose, production by microorganisms, mechanisms as well as BC cultivation and its nanocomposites. The latest use of BC in the biomedical field is thoroughly discussed with its applications in both a pure and composite form. This paper concludes the further investigations of BC in the future that are required to make it marketable in vital biomaterials.

Matched MeSH terms: Bacteria, Aerobic
Start-up, steady state performance and kinetic evaluation of a thermophilic integrated anaerobic-aerobic bioreactor (IAAB)

Chan YJ, Chong MF, Law CL

Bioresour Technol, 2012 Dec;125:145-57.
PMID: 23026327 DOI: 10.1016/j.biortech.2012.08.118

Thermophilic treatment of palm oil mill effluent (POME) was studied in a novel integrated anaerobic-aerobic bioreactor (IAAB). The IAAB was subjected to a program of steady-state operation over a range of organic loading rate (OLR)s, up to 30 g COD/L day in order to evaluate its treatment capacity. The thermophilic IAAB achieved high chemical oxygen demand (COD), biochemical oxygen demand (BOD) and total suspended solids (TSS) removal efficiencies of more than 99% for OLR up to 18.5 g COD/L day. High methane yield of 0.32 LCH(4) (STP)/g COD(removed) with compliance of the final treated effluent to the discharge limit were achieved. This is higher than that of the mesophilic system due to the higher maximum specific growth rate (μ(max)) of the thermophilic microorganisms. Besides, coupling the model of Grau second order model (anaerobic system) with the model of Monod (aerobic system) will completely define the IAAB system.

Matched MeSH terms: Bacteria, Aerobic/growth & development; Bacteria, Aerobic/metabolism*
Cultivation of aerobic granular sludge for rubber wastewater treatment

Rosman NH, Nor Anuar A, Othman I, Harun H, Sulong Abdul Razak MZ, Elias SH, et al.

Bioresour Technol, 2013 Feb;129:620-3.
PMID: 23317554 DOI: 10.1016/j.biortech.2012.12.113

Aerobic granular sludge (AGS) was successfully cultivated at 27±1 °C and pH 7.0±1 during the treatment of rubber wastewater using a sequential batch reactor system mode with complete cycle time of 3 h. Results showed aerobic granular sludge had an excellent settling ability and exhibited exceptional performance in the organics and nutrients removal from rubber wastewater. Regular, dense and fast settling granule (average diameter, 1.5 mm; settling velocity, 33 m h(-1); and sludge volume index, 22.3 mL g(-1)) were developed in a single reactor. In addition, 96.5% COD removal efficiency was observed in the system at the end of the granulation period, while its ammonia and total nitrogen removal efficiencies were up to 94.7% and 89.4%, respectively. The study demonstrated the capabilities of AGS development in a single, high and slender column type-bioreactor for the treatment of rubber wastewater.

Matched MeSH terms: Bacteria, Aerobic/isolation & purification; Bacteria, Aerobic/physiology*
Investigating to some microbial pollution parameters of seawater and mussels (mytilus galloprovincialis, Lamarck 1819) of Sіnop Black Sea Coastal Zone, Turkey

Ismet Berber, Cumhur Avsar

Sains Malaysiana, 2014;43:1835-1842.

The presence of coliforms bacteria is one of the most prevalent problems in terms of public health in marine ecosystems over the world. In this study were investigated the physico-chemical properties of seawater and the numbers of total aerobic, total coliform, fecal coliform, E. coli O157:H7 and fecal streptococci in seawater and mussel samples collected from Sinop environs between May and October 2011. The microbiological analysis of seawater samples showed that the difference between total coliform, fecal coliform and fecal streptococci numbers (p<0.05) was significant for each station. However, the difference among total aerobic bacteria numbers for each stations (p>0.05) were not found significant. The difference between whole counting results for mussel samples taken from different sampling sites was not significant (p>0.05), too. Furthermore, the results of the screening assay for the presence of E. coli O157:H7 showed that the strain was not detected in neither seawater nor mussel samples. In conclusion, it was determined that fecal coliform and fecal streptococci counts in the seawater and mussel samples were higher than legal (Turkish Bathing Water and Quality of Fishery Products Regulation) limit values for some stations in Sinop coastal areas.

Matched MeSH terms: Bacteria, Aerobic
Fulltext Characterization of cellulolytic bacterial cultures grown in different substrates

Alshelmani MI, Loh TC, Foo HL, Lau WH, Sazili AQ

ScientificWorldJournal, 2013;2013:689235.
PMID: 24319380 DOI: 10.1155/2013/689235

Nine aerobic cellulolytic bacterial cultures were obtained from the Leibniz Institute DSMZ-German Collection of Microorganisms and Cell Culture (DSMZ) and the American Type Culture Collection (ATCC). The objectives of this study were to characterize the cellulolytic bacteria and to determine the optimum moisture ratio required for solid state fermentation (SSF) of palm kernel cake (PKC). The bacteria cultures were grown on reconstituted nutrient broth, incubated at 30°C and agitated at 200 rpm. Carboxymethyl cellulase, xylanase, and mannanase activities were determined using different substrates and after SSF of PKC. The SSF was conducted for 4 and 7 days with inoculum size of 10% (v/w) on different PKC concentration-to-moisture ratios: 1 : 0.2, 1 : 0.3, 1 : 0.4, and 1 : 0.5. Results showed that Bacillus amyloliquefaciens 1067 DSMZ, Bacillus megaterium 9885 ATCC, Paenibacillus curdlanolyticus 10248 DSMZ, and Paenibacillus polymyxa 842 ATCC produced higher enzyme activities as compared to other bacterial cultures grown on different substrates. The cultures mentioned above also produced higher enzyme activities when they were incubated under SSF using PKC as a substrate in different PKC-to-moisture ratios after 4 days of incubation, indicating that these cellulolytic bacteria can be used to degrade and improve the nutrient quality of PKC.

Matched MeSH terms: Bacteria, Aerobic/physiology*
Kinetic modeling of bioregeneration of chlorophenol-loaded granular activated carbon in simultaneous adsorption and biodegradation processes

Oh WD, Lim PE, Seng CE, Sujari AN

Bioresour Technol, 2012 Jun;114:179-87.
PMID: 22503192 DOI: 10.1016/j.biortech.2012.03.065

A kinetic model incorporating adsorption, desorption and biodegradation processes was developed to describe the bioregeneration of granular activated carbon (GAC) loaded with 4-chlorophenol (4-CP) and 2,4-dichlorophenol (2,4-DCP), respectively, in simultaneous adsorption and biodegradation processes. The model was numerically solved and the results showed that the kinetic model was well-fitted (R(2)>0.83) to the experimental data at different GAC dosages and at various initial 4-CP and 2,4-DCP concentrations. The rate of bioregeneration in simultaneous adsorption and biodegradation processes was influenced by the ratio of initial chlorophenol concentration to GAC dosage. Enhancement in the rate of bioregeneration was achieved by using the lowest ratio under either one of the following experimental conditions: (1) increasing initial chlorophenol concentration at constant GAC dosage and (2) increasing GAC dosage at constant initial chlorophenol concentration. It was found that the rate enhancement was more pronounced under the second experimental condition.

Matched MeSH terms: Bacteria, Aerobic/metabolism*
Respirometric analysis of activated sludge models from palm oil mill effluent

Damayanti A, Ujang Z, Salim MR, Olsson G, Sulaiman AZ

Bioresour Technol, 2010 Jan;101(1):144-9.
PMID: 19734044 DOI: 10.1016/j.biortech.2009.08.034

Activated sludge models (ASMs) have been widely used as a basis for further model development in wastewater treatment processes. Values for parameters to be used are vital for the accuracy of the modeling approach. A continuous stirred tank reactor (CSTR), as open respirometer with continuous flow for 20 h is used in ASMs. The dissolved oxygen (DO) profile for 11 days was monitored. It was found the mass transfer coefficient K(La) is 0.3 h(-1) during lag and start feed phase and 0.01 h(-1) during stop feed phase, while the heterotrophic yield coefficient Y(H) is 0.44. Some of the chemical oxygen demand (COD) fractionations of palm oil mill effluent (POME) using respirometric test in ASM models are S(s) 50 mg/L, S(I) 16,600 mg/L, X(S) 25,550 mg/L, and X(I) 2,800 mg/L. The comparison of experimental and ASM1 from OUR concentration is found to fit well.

Matched MeSH terms: Bacteria, Aerobic/metabolism*
Intracellular biopolymer productions using mixed microbial cultures from fermented POME

Salmiati, Ujang Z, Salim MR, Md Din MF, Ahmad MA

Water Sci Technol, 2007;56(8):179-85.
PMID: 17978446

This study aimed to produce polyhydroxyalkanoates (PHAs) from organic wastes by mixed bacterial cultures using anaerobic-aerobic fermentation systems. Palm oil mill effluent (POME) was used as an organic source, which was cultivated in a two-step-process of acidogenesis and acid polymerization. POME was operated in a continuous flow anaerobic reactor to access volatile fatty acids (VFAs) for PHAs production. During fermentation, VFA concentration was produced in the range of 5 to 8 g/L and the COD concentration reduced up to 80% from 65 g/L. The VFA from anaerobic fermentation was then utilised for PHA production using a mixed culture in availability of aerobic bioreactor. Production of PHAs was recorded high when using a high volume of substrates because of the higher VFA concentration. Even though the maximum PHA content was observed at only 40% of the cell dried weight (CDW), their production and performance are significant in mixed microbial culture.

Matched MeSH terms: Bacteria, Aerobic/metabolism*
Rheological and fractal hydrodynamics of aerobic granules

Tijani HI, Abdullah N, Yuzir A, Ujang Z

Bioresour Technol, 2015 Jun;186:276-85.
PMID: 25836036 DOI: 10.1016/j.biortech.2015.02.107

The structural and hydrodynamic features for granules were characterized using settling experiments, predefined mathematical simulations and ImageJ-particle analyses. This study describes the rheological characterization of these biologically immobilized aggregates under non-Newtonian flows. The second order dimensional analysis defined as D2=1.795 for native clusters and D2=1.099 for dewatered clusters and a characteristic three-dimensional fractal dimension of 2.46 depicts that these relatively porous and differentially permeable fractals had a structural configuration in close proximity with that described for a compact sphere formed via cluster-cluster aggregation. The three-dimensional fractal dimension calculated via settling-fractal correlation, U∝l(D) to characterize immobilized granules validates the quantitative measurements used for describing its structural integrity and aggregate complexity. These results suggest that scaling relationships based on fractal geometry are vital for quantifying the effects of different laminar conditions on the aggregates' morphology and characteristics such as density, porosity, and projected surface area.

Matched MeSH terms: Bacteria, Aerobic/metabolism*
Effect of TiO2 nanoparticles on aerobic granulation of algal-bacterial symbiosis system and nutrients removal from synthetic wastewater

Li B, Huang W, Zhang C, Feng S, Zhang Z, Lei Z, et al.

Bioresour Technol, 2015;187:214-220.
PMID: 25855527 DOI: 10.1016/j.biortech.2015.03.118

The influence of TiO2 nanoparticles (TiO2-NPs) (10-50mg/L) on aerobic granulation of algal-bacterial symbiosis system was investigated by using two identical sequencing batch reactors (SBRs). Although little adverse effect was observed on their nitritation efficiency (98-100% in both reactors), algal-bacterial granules in the control SBR (Rc) gradually lost stability mainly brought about by algae growth. TiO2-NPs addition to RT was found to enhance the granulation process achieving stable and compact algal-bacterial granules with remarkably improved nitratation thus little nitrite accumulation in RT when influent TiO2-NPs⩾30mg/L. Despite almost similar organics and phosphorus removals obtained in both reactors, the stably high nitratation efficiency in addition to much stable granular structure in RT suggests that TiO2-NPs addition might be a promising remedy for the long-term operation of algal-bacterial granular system, most probably attributable to the stimulated excretion of extracellular polymeric substances and less filamentous TM7.

Matched MeSH terms: Bacteria, Aerobic/drug effects; Bacteria, Aerobic/physiology*
Fulltext Loktanella spp. Gb03 as an algicidal bacterium, isolated from the culture of Dinoflagellate Gambierdiscus belizeanus

Bloh AH, Usup G, Ahmad A

Vet World, 2016 Feb;9(2):142-6.
PMID: 27051199 DOI: 10.14202/vetworld.2016.142-146

AIM: Bacteria associated with harmful algal blooms can play a crucial role in regulating algal blooms in the environment. This study aimed at isolating and identifying algicidal bacteria in Dinoflagellate culture and to determine the optimum growth requirement of the algicidal bacteria, Loktanella sp. Gb-03.
MATERIALS AND METHODS: The Dinoflagellate culture used in this study was supplied by Professor Gires Usup's Laboratory, School of Environmental and Natural Resources Sciences, Faculty of Science and Technology, University Kebangsaan Malaysia, Malaysia. The culture was used for the isolation of Loktanella sp., using biochemical tests, API 20 ONE kits. The fatty acid content of the isolates and the algicidal activity were further evaluated, and the phenotype was determined through the phylogenetic tree.
RESULTS: Gram-negative, non-motile, non-spore-forming, short rod-shaped, aerobic bacteria (Gb01, Gb02, Gb03, Gb04, Gb05, and Gb06) were isolated from the Dinoflagellate culture. The colonies were pink in color, convex with a smooth surface and entire edge. The optimum growth temperature for the Loktanella sp. Gb03 isolate was determined to be 30°C, in 1% of NaCl and pH7. Phylogenetic analysis based on 16S rRNA gene sequences showed that the bacterium belonged to the genus Loktanella of the class Alphaproteobacteria and formed a tight cluster with the type strain of Loktanella pyoseonensis (97.0% sequence similarity).
CONCLUSION: On the basis of phenotypic, phylogenetic data and genetic distinctiveness, strain Gb-03, were placed in the genus Loktanella as the type strain of species. Moreover, it has algicidal activity against seven toxic Dinoflagellate. The algicidal property of the isolated Loktanella is vital, especially where biological control is needed to mitigate algal bloom or targeted Dinoflagellates.

Matched MeSH terms: Bacteria, Aerobic
Fulltext Disinfectant of pummelo (Citrus Grandis L. Osbeck) fruit juice using gaseous ozone

Shah NNAK, Supian NAM, Hussein NA

J Food Sci Technol, 2019 Jan;56(1):262-272.
PMID: 30728568 DOI: 10.1007/s13197-018-3486-2

This work studied the effectiveness of gaseous ozone disinfection on pummelo (Citrus Grandis L. Osbeck) fruit juice components. Unfiltered and filtered pummelo fruit juices were treated with gaseous ozone for up to 50 min with ozone concentration fixed at 600 mg/h. A microbiological and physicochemical properties analysis were conducted on the ozone-treated fruit juices samples. It was found that the survival rate of aerobic bacteria, yeast and mold in unfiltered pummelo fruit juice were higher compared to filtered juice, as the juice components acted as protective barriers to the microorganisms. The microorganisms' inactivation in pummelo fruit juices was also observed to have increased as the ozone treatment time increased. Significant effects on total colour difference, ascorbic acid content, and total phenolic content were also observed over increased ozone-treatment time. However, ozone was shown to be ineffective in activating PME activity in both types of juice. The experimental results of this study indicated that pummelo fruit juice components had significant effects on the effectiveness of gaseous ozone, however, the degree of the effects depends on the different fruit components (total soluble solids, total phenolic content). As a conclusion, filtered juice showed better quality characteristics in comparison to unfiltered juice post-ozone treatment.

Matched MeSH terms: Bacteria, Aerobic
Fulltext Biochemical changes of fresh and preserved freshwater prawns (Macrobrachium rosenbergii) during storage

Abu Bakar, F., Salleh, A.B., Razak, C.N.A., Basri, M., Ching, M.K., Son, R.

International Food Research Journal, 2008;15(2):181-191.
MyJurnal

Biochemical analysis was carried out for pH profiles, freshness in terms of K-values, amino acids profiles, total volatile bases (TVB), total volatile acids (TVA) and biogenic amines for fresh and preserved Macrobrachium rosenbergii. Results showed that pH profiles of Macrobrachium rosenbergii explain the inability of this parameter to be used to evaluate the quality of Macrobrachium rosenbergii. Thus changes in pH profiles of Macrobrachium rosenbergii should be combined with indicators such as total volatile acids and total volatile bases. Total volatile acids of the shrimps increased steadily in small amounts throughout the storage period. A rapid increase in TVB at 100C was detected due to the increase in total aerobic bacteria at elevated temperatures. The microbial activities caused the decrease in the amino acids arginine, lysine and histidine which correlated well with the increase in the corresponding biogenic amines such as putrescine, cadaverine and histamine respectively. Preservatives used in this study controlled the production of these biogenic amines without significantly altering the pH of preserved shrimp.

Matched MeSH terms: Bacteria, Aerobic
High-temperature EBPR process: the performance, analysis of PAOs and GAOs and the fine-scale population study of Candidatus "Accumulibacter phosphatis"

Ong YH, Chua ASM, Fukushima T, Ngoh GC, Shoji T, Michinaka A

Water Res, 2014 Nov 01;64:102-112.
PMID: 25046374 DOI: 10.1016/j.watres.2014.06.038

The applicability of the enhanced biological phosphorus removal (EBPR) process for the removal of phosphorus in warm climates is uncertain due to frequent reports of EBPR deterioration at temperature higher than 25 °C. Nevertheless, a recent report on a stable and efficient EBPR process at 28 °C has inspired the present study to examine the performance of EBPR at 24 °C-32 °C, as well as the PAOs and GAOs involved, in greater detail. Two sequencing batch reactors (SBRs) were operated for EBPR in parallel at different temperatures, i.e., SBR-1 at 28 °C and SBR-2 first at 24 °C and subsequently at 32 °C. Both SBRs exhibited high phosphorus removal efficiencies at all three temperatures and produced effluents with phosphorus concentrations less than 1.0 mg/L during the steady state of reactor operation. Real-time quantitative polymerase chain reaction (qPCR) revealed Accumulibacter-PAOs comprised 64% of the total bacterial population at 24 °C, 43% at 28 °C and 19% at 32 °C. Based on fluorescent in situ hybridisation (FISH), the abundance of Competibacter-GAOs at both 24 °C and 28 °C was rather low (<10%), while it accounted for 40% of the total bacterial population at 32 °C. However, the smaller Accumulibacter population and larger population of Competibacter at 32 °C did not deteriorate the phosphorus removal performance. A polyphosphate kinase 1 (ppk1)-based qPCR analysis on all studied EBPR processes detected only Accumulibacter clade IIF. The Accumulibacter population shown by 16S rRNA and ppk1 was not significantly different. This finding confirmed the existence of single clade IIF in the processes and the specificity of the clade IIF primer sets designed in this study. Habitat filtering related to temperature could have contributed to the presence of a unique clade. The clade IIF was hypothesised to be able to perform the EBPR activity at high temperatures. The clade's robustness most likely helps it to fit the high-temperature EBPR sludge best and allows it not only to outcompete other Accumulibacter clades but coexist with GAOs without compromising EBPR activity.

Matched MeSH terms: Bacteria, Aerobic/metabolism
Physico-chemical removal of iron from semi-aerobic landfill leachate by limestone filter

Aziz HA, Yusoff MS, Adlan MN, Adnan NH, Alias S

Waste Manag, 2004;24(4):353-8.
PMID: 15081062

Limestone has been proven effective in removing metals from water and wastewater. A literature review indicated that limestone is capable of removing heavy metals such as Cu, Zn, Cd, Pb, Ni, Cr, Fe and Mn are through a batch process or by filtration technique. The removal capability is reported at up to 90%. However, to date most of the studies have been focused on synthetic wastewater. The present study attempts to investigate the suitability of limestone to attenuate total iron (Fe) from semi aerobic leachate at Pulau Burung Landfill Site in Penang, Malaysia. Iron was found in significant quantities at the landfill site. The study also aims to establish the Fe isotherm and breakthrough time of the proposed limestone filter for post-treatment to the migrating landfill leachate before its release to the environment. The Fe isotherms were established using a batch equilibrium test, while the breakthrough characteristics were determined using continuous flow permeating through a limestone column. The latter was used in order to simulate the continuous flow of leachate that would occur in the proposed limestone filter. The limestone media used in the experiment contain more than 90% CaCO3 with particle sizes ranging from 2 to 4 mm. Four filter columns (each 150 mm in diameter and 1000 mm depth) were installed at the landfill site. Metal loadings were kept below 0.5 kg /m3 day and the experiment was run continuously for 30 days. Initial results indicated that 90% of Fe can be removed from the leachate based on retention time of 57.8 min and surface loading of 12.2 m3/m2 day. For the batch study on the Fe isotherm, the results indicated that limestone is potentially useful as an alternative leachate treatment system at a relatively low cost.

Matched MeSH terms: Bacteria, Aerobic

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links