MyMedR

Displaying publications 1 - 20 of 387 in total

Abstract:

Sort:

Spatiotemporal variation of vegetation cover in mining areas of Dexing City, China

Yu H, Zahidi I, Liang D

Environ Res, 2023 May 15;225:115634.
PMID: 36889570 DOI: 10.1016/j.envres.2023.115634

Dexing City is an important mining city in China, abounding in copper ore, lead ore, zinc ore, and other metal resources, and there are two large open-pit mines in its territory, Dexing Copper Mine and Yinshan Mine. The two open-pit mines have been expanding their mining production scale since 2005, with frequent mining activities; and the expansion of the pits and the discharge of solid waste will undoubtedly increase the land use and cause the destruction of vegetation. Therefore, we plan to visualize the change in vegetation cover in Dexing City from 2005 to 2020 and the expansion of the two open-pit mines by calculating changes of the Fractional Vegetation Cover (FVC) in the mining area using remote sensing technology. In this study, we calculated the FVC of Dexing City in 2005, 2010, 2015 and 2020 using data from NASA Landsat Database via ENVI image analysis software, plotted the FVC reclassified maps via ArcGIS, and conducted field investigations in the mining areas of Dexing City. In this way, we can visualize the spatial and temporal changes of vegetation cover in Dexing City from 2005 to 2020, and appreciate the situation of mining expansion and its solid waste discharge in Dexing City. The results of this study showed that the vegetation cover of Dexing City remained stable from 2005 to 2020, as the expansion of mining scale and mine pits was accompanied by active environmental management and land reclamation, setting a positive example for other mining cities.

Matched MeSH terms: Copper*
Activity and product distribution in Ni-Co and Ni-Cu catalyst-mediated lignin depolymerization into phenolic substances with isopropanol H-donating solvent

Ewuzie RN, Genza JR, Abdullah AZ

Environ Sci Pollut Res Int, 2024 Aug;31(37):49727-49743.
PMID: 39080163 DOI: 10.1007/s11356-024-34504-2

Lignin, a vital renewable biopolymer, serves as the Earth's primary source of aromatics and carbon. Its depolymerization presents significant potential for producing phenolic fine chemicals. This study assesses promoted Ni-based bimetallic catalysts (Ni-Co/C and Ni-Cu/C) supported on activated carbon in isopropanol for lignin depolymerization, compared to monometallic counterparts. BET, SEM, EDX, and XPS analyses highlight their physicochemical properties and promotional effects, enhancing hydrogenolysis activity and hydrogen transformation. Reaction parameter exploration elucidates the influence on lignin depolymerization, with cobalt and copper as promoters notably increasing conversion and monomer yield. Ni-Co/C exhibits the highest lignin conversion (94.2%) and maximum monomer yield (53.1 wt%) under specified conditions, with lower activation energy (36.1 kJ/mol) and higher turnover frequency (31.6 h-1) compared to Ni/C. FT-IR, GPC, GC-FID, and GC-MS analyses confirm effective depolymerization, identifying 20 monomer products. Proposed reaction mechanisms underscore the potential of Ni-based bimetallic catalysts for lignin valorization, offering insights into developing efficient catalytic systems for lignin hydrogenolysis. This research enhances understanding and facilitates the development of selective catalytic processes for lignin valorization.

Matched MeSH terms: Copper/chemistry
Fulltext Synthesis, biomedical applications, and toxicity of CuO nanoparticles

Naz S, Gul A, Zia M, Javed R

Appl Microbiol Biotechnol, 2023 Feb;107(4):1039-1061.
PMID: 36635395 DOI: 10.1007/s00253-023-12364-z

Versatile nature of copper oxide nanoparticles (CuO NPs) has made them an imperative nanomaterial being employed in nanomedicine. Various physical, chemical, and biological methodologies are in use for the preparation of CuO NPs. The physicochemical and biological properties of CuO NPs are primarily affected by their method of fabrication; therefore, selectivity of a synthetic technique is immensely important that makes these NPs appropriate for a specific biomedical application. The deliberate use of CuO NPs in biomedicine questions their biocompatible nature. For this reason, the present review has been designed to focus on the approaches employed for the synthesis of CuO NPs; their biomedical applications highlighting antimicrobial, anticancer, and antioxidant studies; and most importantly, the in vitro and in vivo toxicity associated with these NPs. This comprehensive overview of CuO NPs is unique and novel as it emphasizes on biomedical applications of CuO NPs along with its toxicological assessments which would be useful in providing core knowledge to researchers working in these domains for planning and conducting futuristic studies. KEY POINTS: • The recent methods for fabrication of CuO nanoparticles have been discussed with emphasis on green synthesis methods for different biomedical approaches. • Antibacterial, antioxidant, anticancer, antiparasitic, antidiabetic, and antiviral properties of CuO nanoparticles have been explained. • In vitro and in vivo toxicological studies of CuO nanoparticles exploited along with their respective mechanisms.

Matched MeSH terms: Copper/toxicity; Copper/chemistry
Facile synthesis of CuO/CdS heterostructure photocatalyst for the effective degradation of dye under visible light

Hossain SS, Tarek M, Munusamy TD, Rezaul Karim KM, Roopan SM, Sarkar SM, et al.

Environ Res, 2020 09;188:109803.
PMID: 32590149 DOI: 10.1016/j.envres.2020.109803

In this work, the photocatalytic property of p-type CuO was tailored by creating a heterojunction with n-type CdS. The CuO/CdS nanocomposite photocatalyst was synthesized by the ultrasound-assisted-wet-impregnation method and the physicochemical and optical properties of the catalysts were evaluated by using N2 physisorption, X-Ray Diffraction (XRD),X-Ray Photoelectron Spectroscopy (XPS), Raman spectroscopy, Transmission electron microscopy (TEM), Energy dispersive X-Ray (EDX) mapping, Field Emission Scanning Electron Microscope (FE-SEM), UV-Vis and photoluminescence spectroscopy experiments. Detailed characterization revealed the formation of a nanocomposite with a remarkable improvement in the charge carrier (electron/hole) separation. The photocatalytic degradation efficiencies of CuO and CuO/CdS were investigated for different dyes, for instance, rhodamine B (RhB), methylene blue (MLB), methyl blue (MB) and methyl orange (MO) under visible light irradiation. The obtained dye degradation efficiencies were ~93%, ~75%, ~83% and ~80%, respectively. The quantum yield for RhB degradation under visible light was 6.5 × 10-5. Reusability tests revealed that the CuO/CdS photocatalyst was recyclable up to four times. The possible mechanisms for the photocatalytic dye degradation over CuO/CdS nanocomposite were elucidated by utilizing various scavengers. Through these studies, it can be confirmed that the conduction band edges of CuO and CdS play a significant role in producing O2-. The produced O2- degraded the dye molecules in the bulk solution whereas the valence band position of CuO acted as the water oxidation site. In conclusion, the incorporation of CuO with CdS was demonstrated to be a viable strategy for the efficient photocatalytic degradation of dyes in aqueous solutions.

Matched MeSH terms: Copper*
Rational design of built-in stannic oxide-copper manganate microrods p-n heterojunction for photoelectrochemical sensing of tetracycline

Velmurugan S, Zhi-Xiang L, C-K Yang T, Juan JC

Chemosphere, 2021 May;271:129788.
PMID: 33556631 DOI: 10.1016/j.chemosphere.2021.129788

Tetracycline (TC), a popularly found drug pollutant, can be contaminated in food and aquatic regions and causes a severe impact on human health. In this research, a visible light active p-stannic oxide/n-copper manganate (p-SnO2/n-CuMnO2) heterojunction was synthesized and has been applied for a signal on photoelectrochemical sensing of antibiotic TC. Firstly, the n-SnO2 microrods were synthesized via a simple and efficient homogeneous precipitation method and the p-CuMnO2 nanoparticles were synthesized by a facile ultrasound-assisted hydrothermal method. The SnO2/CuMnO2 microrods p-n heterojunction was prepared through a simple impregnation method and physicochemical properties of the microrods are characterized by using X-ray diffraction (XRD), Raman, Brunauer-Emmett-Teller (BET), Fourier-transform infrared (FTIR), UV-Vis diffuse reflectance spectroscopy (UVDRS), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and Mott-Schottky analyses. The photoelectrochemical sensing performance of SnO2/CuMnO2 microrods was 2.7 times higher than that of as-synthesized pure SnO2 microrods is due to the more visible light absorption ability and p-n heterojunction (synergy). The designed SnO2/CuMnO2/ITO sensor gives photocurrent signals for the detection of TC in the range of 0.01-1000 μM with the detection limit (LOD) of 5.6 nM. The practical applicability of the sensor was monitored in cow milk and the Taipei River water sample.

Matched MeSH terms: Copper*
de novo transcriptome assembly for discovering gene expressed in Holothuria leucospilota with exposed to copper

Leong RZL, Lim LH, Chew YL, Teo SS

Anim Biotechnol, 2023 Dec;34(9):4474-4487.
PMID: 36576030 DOI: 10.1080/10495398.2022.2158094

Sea cucumber is a bioremediator as it can composite organic matter and excrete inorganic matter. Sea cucumber has the potential to serve as a bioindicator in marine habitat as they provide an integrated insight into the status of their environment over long periods. Sea cucumbers are sensitive to the organic concentration in the marine environment and can effectively provide an early warning system for any organic contamination that can negatively impact the ecosystem. The availability of a reference transcriptome for sea cucumber would constitute an essential tool for identifying genes involved in crucial steps of the defence pathway. De novo assembly of RNA-seq data enables researchers to study the transcriptomes without needing a genome sequence. In this study, sea cucumbers fed with Kappaphycus alvarezii powder were treated with 0.20 mg/L copper concentration comprehensive transcriptome data containing 75,149 Unigenes, with a total length of 20,460,032 bp. A total of 8820 genes were predicted from the unigenes, annotated, and functionally categorized into 25 functional groups with approximately 20% cluster in signal transduction mechanism. The reference transcriptome presented and validated in this study is meaningful for identifying a wide range of gene(s) related to the bioindication of sea cucumber in a high copper environment.

Matched MeSH terms: Copper/toxicity
Recovery of copper and silver from industrial e-waste leached solutions using sustainable liquid membrane technology: a review

Kahar INS, Othman N, Noah NFM, Suliman SS

Environ Sci Pollut Res Int, 2023 May;30(25):66445-66472.
PMID: 37101217 DOI: 10.1007/s11356-023-26951-0

Waste electrical and electronic equipment or e-waste has recently emerged as a significant global concern. This waste contains various valuable metals, and via recycling, it could become a sustainable resource of metals (viz. copper, silver, gold, and others) while reducing reliance on virgin mining. Copper and silver with their superior electrical and thermal conductivity have been reviewed due to their high demand. Recovering these metals will be beneficial to attain the current needs. Liquid membrane technology has appeared as a viable option for treating e-waste from various industries as a simultaneous extraction and stripping process. It also includes extensive research on biotechnology, chemical and pharmaceutical, environmental engineering, pulp and paper, textile, food processing, and wastewater treatment. The success of this process depends more on the selection of organic and stripping phases. In this review, the use of liquid membrane technology in treating/recovering copper and silver from industrial e-waste leached solutions was highlighted. It also assembles critical information on the organic phase (carrier and diluent) and stripping phase in liquid membrane formulation for selective copper and silver. In addition, the utilization of green diluent, ionic liquids, and synergist carrier was also included since it gained prominence attention latterly. The future prospects and challenges of this technology were also discussed to ensure the industrialization of technology. Herein, a potential process flowchart for the valorization of e-waste is also proposed.

Matched MeSH terms: Copper*
Potential use of Escherichia coli and Aeromonas hydrophila as bioremediation agents for CuSO4 and ZnCl2 water pollution: insights from AAS and histopathological analysis of Oreochromis mossambicus

Aliza D, Zuki FM, Hassan CRC, Suhendrayatna S, Javanmard A

Environ Monit Assess, 2025 Feb 28;197(3):338.
PMID: 40016595 DOI: 10.1007/s10661-025-13755-7

This study investigates the potential of Escherichia coli and Aeromonas hydrophila as bioremediation agents for removing copper (Cu) and zinc (Zn) from contaminated water. Although Cu and Zn are necessary in trace levels, excessive amounts can be harmful and can linger in aquatic environments, endangering the food chain. Bioremediation using microorganisms offers an alternative method for mitigating heavy metal pollution. In this study, 126 tilapia fish (Oreochromis mossambicus) were exposed to CuSO4 and ZnCl2 for 15 days, followed by treatment with E. coli and A. hydrophila. Atomic absorption spectrometry (AAS) revealed that both bacterial treatments reduced copper and zinc accumulation in fish organs, though they did not fully heal external lesions. Histopathological analysis showed significant reductions in melanomacrophage centers (MMC), cell necrosis, cell dissociation, and vacuolization in fish liver tissue after bacterial treatment, particularly at concentrations of 2.5 mg.L-1 and 5 mg.L-1 for CuSO4 and 7.5 mg.L-1 for ZnCl2. These findings suggest that E. coli and A. hydrophila have the potential to be developed as effective bioremediation agents for CuSO4 and ZnCl2 pollution in aquatic environments.

Matched MeSH terms: Copper/metabolism
Biosorption of copper by endophytic fungi isolated from Nepenthes ampullaria

Wong C, Tan LT, Mujahid A, Lihan S, Wee JLS, Ting LF, et al.

Lett Appl Microbiol, 2018 Oct;67(4):384-391.
PMID: 29998586 DOI: 10.1111/lam.13049

Copper (Cu) tolerance was observed by endophytic fungi isolated from the carnivorous plant Nepenthes ampullaria (collected at an anthropogenically affected site, Kuching city; and a pristine site; Heart of Borneo). The fungal isolates, capable of tolerating Cu up to 1000 ppm (11 isolates in total), were identified through molecular method [internal transcribed spacer 4+5 (ITS4+5); ITS1+NL4; β-tubulin region using Bt2a + Bt2b], and all of them grouped with Diaporthe, Nigrospora, and Xylaria. A Cu biosorption study was then carried out using live and dead biomass of the 11 fungal isolates. The highest biosorption capacity of using live biomass was achieved by fungal isolates Xylaria sp. NA40 (73·26 ± 1·61 mg Cu per g biomass) and Diaporthe sp. NA41 (72·65 ± 2·23 mg Cu per g biomass), NA27 (59·81 ± 1·15 mg Cu per g biomass) and NA28 (56·85 ± 4·23 mg Cu per g biomass). The fungal isolate Diaporthe sp. NA41 also achieved the highest biosorption capacity of 59·33 ± 0·15 mg g-1 using dead biomass. The living biomass possessed a better biosorption capacity than the dead biomass (P copper (Cu) biosorption capacities using living biomass compared to fungal strains originating from plants collected in virgin jungle (P

Matched MeSH terms: Copper/metabolism*; Copper/pharmacology*
Higher Risks of Copper Toxicity in Turbid Waters: Quantifying the Bioavailability of Particle-Bound Metals to Set Site-Specific Water Quality Criteria

Cao X, Yu ZX, Xie M, Pan K, Tan QG

Environ Sci Technol, 2023 Jan 17;57(2):1060-1070.
PMID: 36595456 DOI: 10.1021/acs.est.2c06447

In coastal waters, particulate metals constitute a substantial fraction of the total metals; however, the prevalent water quality criteria are primarily based on dissolved metals, seemingly neglecting the contribution of particulate metals. Here we developed a method to quantify the toxicity risk of particulate metals, and proposed a way to calculate modifying factors (MFs) for setting site-specific criteria in turbid waters. Specifically, we used a side-by-side experimental design to study copper (Cu) bioaccumulation and toxicity in an estuarine clam, Potamocorbula laevis, under the exposure to "dissolved only" and "dissolved + particulate" 65Cu. A toxicokinetic-toxicodynamic model (TK-TD) was used to quantify the processes of Cu uptake, ingestion, assimilation, egestion, and elimination, and to relate mortality risk to tissue Cu. We find that particulate Cu contributes 40-67% of the Cu bioaccumulation when the suspended particulate matter (SPM) ranges from 12 to 229 mg L-1. The Cu-bearing SPM also increases the sensitivity of organisms to internalized Cu by decreasing the internal threshold concentration (CIT) from 141 to 76.8 μg g-1. MFs were derived based on the TK-TD model to consider the contribution of particulate Cu (in the studied SPM range) for increasing Cu bioaccumulation (MF = 1.3-2.2) and toxicity (MF = 2.3-3.9). Water quality criteria derived from dissolved metal exposure need to be lowered by dividing by an MF to provide adequate protection. Overall, the method we developed provides a scientifically sound framework to manage the risks of metals in turbid waters.

Matched MeSH terms: Copper/analysis; Copper/toxicity
Fulltext Intermetallic phase formation and thickness of tin-zinc based lead-free solders

Mayappan, Ramani, Ahmad Badri Ismail, Zainal Arifin Ahmad, Hussain, Luay Bakir, Ariga, Tadashi

Journal of Nuclear and Related Technologies, 2007;2007(1):143-148.
MyJurnal

In this study the intermetallic (IMC) thickness of Sn-Pb, Sn-Zn and Sn-Zn-Bi solders on copper (Cu) substrate were measured at different temperatures using reflow methods. Cu6Sn5 intermetallic phase was detected between Sn-Pb solder and Cu substrate. The J-Cu5Zn8 phase was detected between Sn-Zn and Sn-Zn-Bi lead-free solders with Cu substrate. The thickness of the intermetallics increases with temperature. The IMC thickness for Sn-8Zn-3Bi solder is lower than Sn-9Zn solder for all the soldering temperatures, indicating that Bi has suppressed the initial IMC formation.

Matched MeSH terms: Copper
Fulltext Osteoblastic Cell Responses of Copper Nanoparticle Coatings on Ti-6Al-7Nb Alloy Using Electrophoretic Deposition Method

Hameed HA, Hasan HA, Luddin N, Husein A, Ariffin A, Alam MK

Biomed Res Int, 2022;2022:3675703.
PMID: 35496039 DOI: 10.1155/2022/3675703

AIM: To investigate and compare the cell cytotoxicity, proliferation, cell attachment, and morphology of human fetal osteoblasts (hFOB) cells of coated samples (titanium nanocopper (Ti Cu), titanium nanohydroxyapatite (Ti HA) and titanium nanocopper ion doped hydroxyapatite (Ti Cu/HA) and uncoated samples (Ti) in order to assess the suitability of these surface modifications on Ti-6Al-7Nb for dental implant application.
MATERIALS AND METHODS: The cytotoxicity was studied by examining the hFOB cell response by MTT assessment. The cell morphology was evaluated by inverted microscopy and observed under scanning electronic microscopy (SEM).
RESULTS: MTT assay results displayed that the Cu content on the surface of Ti-6Al-7Nb alloys did not produce any cytotoxic effect on cell viability. The cell viability rate in all samples ranges from 97% to 126%, indicating that hFOB cells grew at a high proliferation rate. However, no significant differences in cell viability were observed between Ti and Ti Cu and between Ti HA and Ti Cu/HA groups. Microscopic examination demonstrated no difference in the cell morphology of hFOB among all samples. In addition, SEM observation indicated favorable adhesion and spreading of the cells on the coated and uncoated samples.
CONCLUSIONS: The surface modification of Ti-6Al-7Nb alloy with Cu, HA, and Cu/HA exhibits good cell biocompatibility, and the Cu has no influence on the cell proliferation and differentiation of hFOB.

Matched MeSH terms: Copper
Transformation of oil palm fronds into pentose sugars using copper (II) sulfate pentahydrate with the assistance of chemical additive

Loow YL, Wu TY

J Environ Manage, 2018 Jun 15;216:192-203.
PMID: 28545947 DOI: 10.1016/j.jenvman.2017.04.084

Among the chemical pretreatments available for pretreating biomass, the inorganic salt is considered to be a relatively new but simple reagent that offers comparable pentose (C5) sugar recoveries as the conventional dilute acid hydrolysis. This study investigated the effects of different concentrations (1.5-6.0% (v/v)) of H2O2 or Na2S2O8 in facilitating CuSO4·5H2O pretreatment for improving pentose sugar recovery from oil palm fronds. The best result was observed when 0.2 mol/L of CuSO4·5H2O was integrated with 4.5% (v/v) of Na2S2O8 to recover 8.2 and 0.9 g/L of monomeric xylose and arabinose, respectively in the liquid fraction. On the other hand, an addition of 1.5% (v/v) of H2O2 yielded approximately 74% lesser total pentose sugars as compared to using 4.5% (v/v) Na2S2O8. By using CuSO4·5H2O alone (control), only 0.8 and 1.0 g/L xylose and arabinose, respectively could be achieved. The results mirrored the importance of using chemical additives together with the inorganic salt pretreatment of oil palm fronds. Thus, an addition of 4.5% (v/v) of Na2S2O8 during CuSO4·5H2O pretreatment of oil palm fronds at 120 °C and 30 min was able to attain a total pentose sugar yield up to ∼40%.

Matched MeSH terms: Copper Sulfate*
Early experience with the copper 7, copper T220C and multiload 250 intrauterine devices

Goh TH, Tan CH, Lim SM, Chew SC, Hutapea H, Iskandar J

Med J Malaysia, 1978 Jun;32(4):304-7.
PMID: 732628
Matched MeSH terms: Intrauterine Devices, Copper*
Prediction of copper ions adsorption by attapulgite adsorbent using tuned-artificial intelligence model

Bhagat SK, Pyrgaki K, Salih SQ, Tiyasha T, Beyaztas U, Shahid S, et al.

Chemosphere, 2021 Aug;276:130162.
PMID: 34088083 DOI: 10.1016/j.chemosphere.2021.130162

Copper (Cu) ion in wastewater is considered as one of the crucial hazardous elements to be quantified. This research is established to predict copper ions adsorption (Ad) by Attapulgite clay from aqueous solutions using computer-aided models. Three artificial intelligent (AI) models are developed for this purpose including Grid optimization-based random forest (Grid-RF), artificial neural network (ANN) and support vector machine (SVM). Principal component analysis (PCA) is used to select model inputs from different variables including the initial concentration of Cu (IC), the dosage of Attapulgite clay (Dose), contact time (CT), pH, and addition of NaNO3 (SN). The ANN model is found to predict Ad with minimum root mean square error (RMSE = 0.9283) and maximum coefficient of determination (R2 = 0.9974) when all the variables (i.e., IC, Dose, CT, pH, SN) were considered as input. The prediction accuracy of Grid-RF model is found similar to ANN model when a few numbers of predictors are used. According to prediction accuracy, the models can be arranged as ANN-M5> Grid-RF-M5> Grid-RF-M4> ANN-M4> SVM-M4> SVM-M5. Overall, the applied statistical analysis of the results indicates that ANN and Grid-RF models can be employed as a computer-aided model for monitoring and simulating the adsorption from aqueous solutions by Attapulgite clay.

Matched MeSH terms: Copper*
Fulltext Calculated parameters for the diagnosis of Wilson disease

Zulkufli NS, Sthaneshwar P, Chan WK

Singapore Med J, 2023 Mar;64(3):188-195.
PMID: 35139628 DOI: 10.11622/smedj.2022019

INTRODUCTION: The diagnosis of Wilson disease (WD) is plagued by biochemical and clinical uncertainties. Thus, calculated parameters have been proposed. This study aimed to: (a) compare the diagnostic values of non-caeruloplasmin copper (NCC), NCC percentage (NCC%), copper-caeruloplasmin ratio (CCR) and adjusted copper in WD; and (b) derive and evaluate a discriminant function in diagnosing WD.
METHODS: A total of 213 subjects across all ages who were investigated for WD were recruited. WD was confirmed in 55 patients, and the rest were WD free. Based on serum copper and caeruloplasmin values, NCC, NCC%, CCR and adjusted copper were calculated for each subject. A function was derived using discriminant analysis, and the cut-off value was determined through receiver operating characteristic analysis. Classification accuracy was found by cross-tabulation.
RESULTS: Caeruloplasmin, total copper, NCC, NCC%, CCR, adjusted copper and discriminant function were significantly lower in WD compared to non-WD. Discriminant function showed the best diagnostic specificity (99.4%), sensitivity (98.2%) and classification accuracy (99.1%). Caeruloplasmin levels <0.14 g/L showed higher accuracy than the recommended 0.20 g/L cut-off value (97.7% vs. 87.8%). Similarly, molar NCC below the European cut-off of 1.6 umol/L showed higher accuracy than the American cut-off of 3.9 umol/L (80.3% vs. 59.6%) (P < 0.001). NCC%, mass NCC, CCR and adjusted copper showed poorer performances.
CONCLUSION: Discriminant function differentiates WD from non-WD with excellent specificity, sensitivity and accuracy. Performance of serum caeruloplasmin <0.14 g/L was better than that of <0.20 g/L. NCC, NCC%, CCR and adjusted copper are not helpful in diagnosing WD.

Matched MeSH terms: Copper/analysis
Numerical study of the enhancement of heat transfer for hybrid CuO-Cu Nanofluids flowing in a circular pipe

Balla HH, Abdullah S, Mohdfaizal W, Zulkifli R, Sopian K

J Oleo Sci, 2013;62(7):533-9.
PMID: 23823920

A numerical simulation model for laminar flow of nanofluids in a pipe with constant heat flux on the wall was built to study the effect of the Reynolds number on convective heat transfer and pressure loss. The investigation was performed for hybrid nanofluids consisting of CuO-Cu nanoparticles and compared with CuO and Cu in which the nanoparticles have a spherical shape with size 50, 50, 50nm respectively. The nanofluids were prepared, following which the thermal conductivity and dynamic viscosity were measured for a range of temperatures (10 -60°C). The numerical results obtained were compared with the existing well-established correlation. The prediction of the Nusselt number for nanofluids agrees well with the Shah correlation. The comparison of heat transfer coefficients for CuO, Cu and CuO-Cu presented an increase in thermal conductivity of the nanofluid as the convective heat transfer coefficient increased. It was found that the pressure loss increases with an increase in the Reynolds number, nanoparticle density and particle volume fraction. However, the flow demonstrates enhancement in heat transfer which becomes greater with an increase in the Reynolds number for the nanofluid flow.

Matched MeSH terms: Copper/chemistry*
Patient's effective dose and performance assessment of computed radiography systems

Bushra A, Sulieman A, Edam A, Tamam N, Babikir E, Alrihaima N, et al.

Appl Radiat Isot, 2023 Mar;193:110627.
PMID: 36584412 DOI: 10.1016/j.apradiso.2022.110627

Computed tomography is widely used for planar imaging. Previous studies showed that CR systems involve higher patient radiation doses compared to digital systems. Therefore, assessing the patient's dose and CR system performance is necessary to ensure that patients received minimal dose with the highest possible image quality. The study was performed at three medical diagnostic centers in Sudan: Medical Corps Hospital (MCH), Advance Diagnostic Center (ADC), and Advance Medical Center (AMC). The following tools were used in this study: Tape measure, Adhesive tape, 1.5 mm copper filtration (>10 × 10 cm), TO 20 threshold contrast test object, Resolution test object (e.g., Huttner 18), MI geometry test object or lead ruler, Contact mish, Piranha (semiconductor detector), Small lead or copper block (∼5 × 5 cm), and Steel ruler, to do a different type of tests (Dark Noise, Erasure cycle efficiency, Sensitivity Index calibration, Sensitivity Index consistency, Uniformity, Scaling errors, Blurring, Limiting spatial Resolution, Threshold, and Laser beam Function. Entrance surface air kerma (ESAK (mGy) was calculated from patient exposure parameters using DosCal software for three imaging modalities. A total of 199 patients were examined (112 chest X rays, 77 lumbar spine). The mean and standard deviation (sd) for patients ESAK (mGy) were 2.56 ± 0.1 mGy and 1.6 mGy for the Anteroposterior (AP) and lateral projections for the lumbar spine, respectively. The mean and sd for the patient's chest doses were 0.1 ± 0.01 for the chest X-ray procedures. The three medical diagnostic centers' CR system performance was evaluated and found that all of the three centers have good CR system functions. All the centers satisfy all the criteria of acceptable visual tests. CR's image quality and sensitivity were evaluated, and the CR image is good because it has good contrast and resolution. All the CR system available in the medical centers and upgraded from old X-ray systems to new systems, has been found to work well. The patient's doses were comparable for the chest X-ray procedures, while patients' doses from the lumbar spine showed variation up to 2 folds due to the variation in patients' weight and X-ray machine setting. Patients dose optimization is recommended to ensure the patients received a minimal dose while obtaining the diagnostic findings.

Matched MeSH terms: Copper*
Toxic effects of copper on liver and cholinesterase of Clarias gariepinus

Padrilah SN, Ahmad SA, Yasid NA, Sabullah MK, Daud HM, Khalid A, et al.

Environ Sci Pollut Res Int, 2017 Oct;24(28):22510-22523.
PMID: 28804856 DOI: 10.1007/s11356-017-9923-3

The release of pollutants, especially heavy metals, into the aquatic environment is known to have detrimental effects on such an environment and on living organisms including humans when those pollutants are allowed to enter the food chain. The aim of this study is to analyse the damage to Clarias gariepinus' liver caused by exposure to different concentrations of copper. In the present study, samples of C. gariepinus were exposed to sub-lethal copper sulphate (CuSO4) concentrations (from 0.2 to 20.0 mg/L) for 96 h. Physiological and behavioural alterations were observed with respect to their swimming pattern, mucus secretion and skin colour. Mortality was also observed at high concentrations of copper. Histopathological alterations of the liver were analysed under light, transmission and scanning electron microscopies. The liver of the untreated group showed normal tissue structures, while histopathological abnormalities were observed in the treated fish under light and electron microscopes with increased copper concentrations. Histopathological abnormalities include necrosis, melanomacrophage, hepatic fibrosis and congested blood vessels. In addition, the enzyme activity of liver cholinesterase (ChE) was also found to be affected by copper sulphate, as 100% of cholinesterase activity was inhibited at 20.0 mg/L. Thus, liver enzyme activity and histopathological changes are proven to be alternative sources for biomarkers of metal toxicity.

Matched MeSH terms: Copper/analysis; Copper/toxicity*; Copper Sulfate/toxicity*
Modification of granular activated carbon using low molecular weight polymer for enhanced removal of Cu(2+) from aqueous solution

Yin CY, Aroua MK, Daud WM

Water Sci Technol, 2007;56(9):95-101.
PMID: 18025736

Palm shell activated carbon was modified via surface impregnation with polyethyleneimine (PEI) to enhance removal of Cu(2+) from aqueous solution in this study. The effect of PEI modification on batch adsorption of Cu(2+) as well as the equilibrium behavior of adsorption of metal ions on activated carbon were investigated. PEI modification clearly increased the Cu(2+) adsorption capacities by 68% and 75.86% for initial solution pH of 3 and 5 respectively. The adsorption data of Cu(2+) on both virgin and PEI-modified AC for both initial solution pH of 3 and 5 fitted the Langmuir and Redlich-Peterson isotherms considerably better than the Freundlich isotherm.

Matched MeSH terms: Copper/isolation & purification*; Copper/chemistry

Filters

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links