Garcinia is a plant under the family of Clusiaceae that is commonly used as a flavouring agent. Various phytochemicals including flavonoids and organic acid have been identified in this plant. Among all types of organic acids, hydroxycitric acid or more specifically (-)-hydroxycitric acid has been identified as a potential supplement for weight management and as antiobesity agent. Various in vivo studies have contributed to the understanding of the anti-obesity effects of Garcinia/hydroxycitric acid via regulation of serotonin level and glucose uptake. Besides, it also helps to enhance fat oxidation while reducing de novo lipogenesis. However, results from clinical studies showed both negative and positive antiobesity effects of Garcinia/hydroxycitric acid. This review was prepared to summarise the update of chemical constituents, significance of in vivo/clinical anti-obesity effects, and the importance of the current market potential of Garcinia/hydroxycitric acid.
Umami, the fifth basic taste, is the inimitable taste of Asian foods. Several traditional and locally prepared foods and condiments of Asia are rich in umami. In this part of world, umami is found in fermented animal-based products such as fermented and dried seafood, and plant-based products from beans and grains, dry and fresh mushrooms, and tea. In Southeast Asia, the most preferred seasonings containing umami are fish and seafood sauces, and also soybean sauces. In the East Asian region, soybean sauces are the main source of umami substance in the routine cooking. In Japan, the material used to obtain umami in dashi, the stock added to almost every Japanese soups and boiled dishes, is konbu or dried bonito. This review introduces foods and seasonings containing naturally high amount of umami substances of both animal and plant sources from different countries in Asia.
Enzymatic catalysis is considered to be among the most environmental friendly processes for the synthesis of fine chemicals. In this study, lipase from Thermomyces lanuginosus (Lecitase Ultra™) was used to catalyze the synthesis of flavor esters, i.e., methyl butanoate and methyl benzoate by esterification of the acids with methanol in a microfluidic system. Maximum reaction rates of 195 and 115 mM min(-1) corresponding to catalytic efficiencies (k cat/K M) of 0.30 and 0.24 min(-1) mM(-1) as well as yield conversion of 54 and 41 % were observed in methyl butanoate and methyl benzoate synthesis, respectively. Catalytic turnover (k cat) was higher for methyl butanoate synthesis. Rate of synthesis and yield decreased with increasing flow rates. For both esters, increase in microfluidic flow rate resulted in increased advective transport over molecular diffusion and reaction rate, thus lower conversion. In microfluidic synthesis using T. lanuginosus lipase, the following reaction conditions were 40 °C, flow rate 0.1 mL min(-1), and 123 U g(-1) enzyme loading found to be the optimum operating limits. The work demonstrated the application of enzyme(s) in a microreactor system for the synthesis of industrially important esters.
Time and temperature parameters of superheated steam (SHS) treatment were optimised using response surface methodology (RSM) for specific lipoxygenase (LOX) activity in soya beans and crude protein content in soya milk. The optimal SHS treatment was obtained at 9.3 min and 119 °C. The predicted values of specific LOX activity and crude protein content by RSM were 0.0098 μmol/(min mg protein) and 3.2%, respectively. These values were experimentally verified to be 0.0081 ± 0.0002 μmol/(min mg protein) and 3.0 ± 0.1%, respectively. Sensory evaluation showed that the beany flavour of soya milk produced from SHS treated soya beans was significantly weaker (P
Mushroom cultivation has been more popular recently in Malaysia. They are favoured due to their delicious flavour and low calorific value. Apart from that, they also contain high amount of protein and other essential nutrients. As recommended by food pyramid, people should take in more of their calories from whole grains-based foods than any other sources. Three selected carbohydrate based products namely rice-porridge (RP), paratha flat bread (PB) and conventional cake (CC) were formulated with dried Pleurotus sajor-caju (PSC) powder. All three products were analyzed for proximate analysis and sensory evaluation. Result shows the percentage of moisture, ash, fat and protein of RP increased in line with the levels of PSC powder used except for carbohydrate. Whereas for PB and CCs added with 2%, 4% and 6% PSC, the percentage of all nutrients were higher than control (0%) except for fat. Mushroombased RP had significantly higher value of odour attribute as compared to control, with RP added with 6% PSC powder received the highest score. Meanwhile, mushroom-based PB received better score on textural attribute compared the control. In CC, panels prefer the cake added with 4% PSC powder as they gave higher scores for softness and flavour attributes. In conclusion, addition of PSC powder to partially replace rice and wheat flour in RP, CC and PB enhance essential nutritional components and well accepted by consumers. Thus, PSC powder can be considered to be utilized in carbohydrate–based food products with the purpose of enhancing nutrient compositions without affecting its sensory acceptance.
Consumption of dietary fibre-rich food has been associated with various beneficial physiological properties and health effects. Presently, different types of natural fibre-rich ingredients are added into variety of bakery-based products to improve it fibre content for health promotional purposes. However, majority of these products are frequently added with imported dietary fibre ingredients. In the present study, bread samples were prepared with Zea mays ear (young corn) powder at the levels of either 2%, 4% or 6%. The bread samples were analyzed for nutritional composition, textural properties and sensory acceptance. Addition of young corn powder (YCP) at the level of 6% increases total dietary fibre (from 3.48% to 5.26%), moisture (from 25.64% to 26.55%), fat (from 4.35% to 4.61%) and protein content (from 9.13% to 9.51%) significantly. However, with the increasing of YCP levels in the bread, the carbohydrate content was decreased significantly (from 59.93% to 58.34%) while the ash content (from 0.95% to 0.99%) was not significantly affected. Results of texture profile analysis indicated that addition of YCP up to 6% not significantly affected the springiness (1.01-1.00) but significantly decreased cohesiveness (0.95-0.82). However, the addition of YCP up to 6% has increased hardness (0.18kg-0.57kg), gumminess (0.17kg-0.47kg) and chewiness (0.18kg-0.47kg) attributes of bread samples. On the other result, the sensory evaluation shows that the flavour score was not significantly affected by addition of YCP up to 4% (4.82-4.52) while the tenderness (4.53-4.42), elasticity (4.75-4.58), aroma (4.40-4.47), colour (4.93-4.55) and overall acceptance (4.80-4.35) scores were not significant affected up to 6%. In summary, breads with 4% addition of YCP were considered to be acceptable and potentially used in improving nutritional composition without changing sensory score.
Pumpkin products confer natural sweetness, desirable flavours and β-carotene, a vitamin A precursor when added as ingredients to extruded snacks. Therefore, a potential use for dried pumpkin flour is as an ingredient in ready-to-eat (RTE) snack foods. Growth in this market has driven food manufacturers to produce a variety of new high value snack foods incorporating diverse ingredients to enhance the appearance and nutritional properties of these foods. Ready-to-eat snacks were made by extruding corn grits with 5%, 10%, 15% and 20% of pumpkin flour. Snacks made from 100% corn grits were used as control products for this work. The effect of formulation and screw speeds of 250 rpm and 350 rpm on torque and specific mechanical energy (SME, kWh/kg), physical characteristics (expansion ratio, bulk density, true density and hardness) and the microstructure of the snacks were studied. Increasing the screw speed resulted in a decrease of torque for all formulations. When pumpkin flour was added the specific mechanical energy (SME) decreased by approximately 45%. Increasing the percentage of pumpkin flour at the higher screw speed resulted in a harder texture for the extruded products. X-ray tomography of pumpkin flour-corn grit snacks showed that increased levels of pumpkin flour decreased both the bubble area and bubble size. However, no significant differences (p > 0.05) in bubble wall thickness were measured. By understanding the conditions during extrusion, desirable nutritional characteristics can be incorporated while maximizing expansion to make a product with low bulk density, a fine bubble structure and acceptable organoleptic properties.
Budu is a famous Malaysian fish sauce, usually used as seasoning and condiment in cooking. Budu is produced by mixing fish and salt at certain ratio followed by fermentation for six months in closed tanks. In this study, four commercial brands of Budu were analyzed for their chemical properties (pH, salt content and volatile compounds). The pH of Budu samples ranged from 4.50-4.92, while the salt (NaCl) content ranged between 11.80% and 22.50% (w/v). For tentative identification of volatile flavor compounds in Budu, two GC columns have been used, DB-WAX and HP-5MS. A total of 44 volatile compounds have been detected and 16 were common for both columns. 3-Methyl-1-butanol, 2-methylbutanal, 3-methylbutanal, dimethyl disulfide, 3-(methylthio)-propanal, 3-methylbutanoic acid and benzaldehye have been identified as the aroma-active compounds in Budu due to their lower threshold values.
Fresh-cut pineapple has experienced an increase in demand due to its great health benefits and is rich in vitamins A, B and C. Moreover, pineapple is known as a source of the enzyme bromelain, which has therapeutic applications, such as reducing inflammation, improving digestion and treating osteoarthritis. However, bromelain generally affects the pineapple’s flavour and is less preferred by consumers due to the uncomfortable prickling and tingling sensations it brings. In the present study, two types of gases and their combination, nitrogen (N2) and carbon dioxide (CO2), were used to evaluate their impacts on reducing the tingling and prickling sensations, as well as maintaining the postharvest qualities of fresh-cut pineapple stored at 5°C for 12 days. The parameters being evaluated were the bromelain enzyme activity, flesh colour, ascorbic acid concentration, flesh firmness, soluble solids concentration (SSC), titratable acidity (TA) and sensory evaluation. No significant differences were recorded for all parameters tested. Based on the sensory evaluations, all the attributes, such as colour, aroma, texture, sweetness, sourness, tingling and prickling sensations, and overall acceptance were not affected by the different gases application. Even though no apparent effect was observed, the 30 panellists preferred the aforementioned attributes, except sourness. In conclusion, the fumigation treatments with N2 and CO2 gases were not effective in reducing the tingling and prickling sensations of pineapples cv. Morris.
This study was carried out to improve the nutritional value of goat’s milk dadih by the addition of tropical-fruit purees, namely, jackfruit (Artocarpus heterophyllus, Lam.), pineapple (Ananas comosus) and papaya (Carica papaya). Dadih with added fruits were compared with the control (without fruit puree) for physical, chemical and sensory attributes. The texture properties of the tropical- fruit dadih were significantly different (p< 0.05) from the control. Control dadih showed highest values for lightness and hue (p< 0.05) as compared to tropical- fruit dadih. The addition of tropical- fruit purees significantly increased (p< 0.05) the moisture, protein, ash and vitamin C contents of the fruit added dadih. There were no significant differences (p> 0.05) in the fat, carbohydrate, energy and total soluble solid contents. Sensory evaluations using a hedonic test showed that all dadih were acceptable. Overall, syneresis of the dadih increased with decreasing pH throughout storage at 4°C.
Plants biosynthesize a great diversity of biologically active small molecules of interest for fragrances, flavors, and pharmaceuticals. Among specialized metabolites, terpenoids represent the greatest molecular diversity. Many terpenoids are very complex, and total chemical synthesis often requires many steps and difficult chemical reactions, resulting in a low final yield or incorrect stereochemistry. Several drug candidates with terpene skeletons are difficult to obtain by chemical synthesis due to their large number of chiral centers. Thus, biological production remains the preferred method for industrial production for many of these compounds. However, because these chemicals are often found in low abundance in the native plant, or are produced in plants which are difficult to cultivate, there is great interest in engineering increased production or expression of the biosynthetic pathways in heterologous hosts. Although there are many examples of successful engineering of microbes such as yeast or bacteria to produce these compounds, this often requires extensive changes to the host organism's metabolism. Optimization of plant gene expression, post-translational protein modifications, subcellular localization, and other factors often present challenges. To address the future demand for natural products used as drugs, new platforms are being established that are better suited for heterologous production of plant metabolites. Specifically, direct metabolic engineering of plants can provide effective heterologous expression for production of valuable plant-derived natural products. In this review, our primary focus is on small terpenoids and we discuss the benefits of plant expression platforms and provide several successful examples of stable production of small terpenoids in plants.
Soy sauce taste has become a focus of umami taste research. Umami taste is a 5th basic taste, which is associated to a palatable and pleasurable taste of food. Soy sauce has been used as an umami seasoning since the ancient time in Asia. The complex fermentation process occurred to soy beans, as the raw material in the soy sauce production, gives a distinct delicious taste. The recent investigation on Japanese and Indonesian soy sauces revealed that this taste is primarily due to umami components which have molecular weights lower than 500 Da. Free amino acids are the low molecular compounds that have an important role to the taste, in the presence of sodium salt. The intense umami taste found in the soy sauces may also be a result from the interaction between umami components and other tastants. Small peptides are also present, but have very low, almost undetected umami taste intensities investigated in their fractions.
Solid-phase microextraction (SPME) coupled to gas chromatography has been applied for the headspace analysis (HS) of 12 target flavour compounds in a model orange beverage emulsion. The main volatile flavour compounds studied were: acetaldehyde, ethyl acetate, alpha-pinene, ethyl butyrate, beta-pinene, myrcene, limonene, gamma-terpinene, octanal, decanal, linalool and citral (neral plus geranial). After screening the fibre type, the effect of other HS-SPME variables such as adsorption temperature (25-55 degrees C), extraction time (10-40 min), sample concentration (1-100% w/w), sample amount (5-10 g) and salt amount (0-30% w/w) were determined using a two-level fractional factorial design (2(5-2)) that was expanded further to a central composite design. It was found that an extraction process using a carboxen-polydimethylsiloxane fibre coating at 15 masculineC for 50 min with 5 g of diluted emulsion 1% (w/w) and 30% (w/w) of sodium chloride under stirring mode resulted in the highest HS extraction efficiency. For all volatile flavour compounds, the linearity values were accurate in the concentration ranges studied (r(2) > 0.97). Average recoveries that ranged from 90.3 to 124.8% showed a good accuracy for the optimised method. The relative standard deviation for six replicates of all volatile flavour compounds was found to be less than 15%. For all volatile flavour compounds, the limit of detection ranged from 0.20 to 1.69 mg/L.
Fresh-cut fruits are popular due to the convenience provided. However, fresh-cut processes damage fruit tissues and reduce the shelf life of products. Pulsed light (PL) treatment is a decontamination method of foods. PL treatment given repetitively at a certain interval during storage could further extend the shelf life of fresh-cut fruits. Edible coating preserves fresh-cut fruits by providing mechanical strength and reducing respiration and water loss. This study was to evaluate the effects of alginate coating combined with repetitive pulsed light (RPL) on sensory quality and flavour of fresh-cut cantaloupes during storage. Cantaloupes were treated with alginate (1.86%, w/v) and RPL (0.9 J/cm2 at every 48 h up to 26 days) alone or in combination. Flavour analysis of fresh-cut cantaloupes was carried out every 12 days during storage at 4 ± 1 °C while sensory analysis was performed on day 32. Alginate coating and/or RPL retained sugar contents (17.92-20.01 g/kg FW for fructose, 18.77-19.98 g/kg FW for glucose and 23.02-29.41 g/kg FW for sucrose) in fresh-cut cantaloupes during storage. Combination of alginate with RPL reduced accumulation of lactic acid although alginate coating was more effective to minimise changes of other organic acids in fresh-cut cantaloupes. The combined treatment was also more effective than individual treatment in retaining total aroma compound concentration of fresh-cut cantaloupes during storage with the highest relative concentration, i.e. 3.174 on day 36. Overall, the combined alginate coating and RPL was effective to maintain the fresh-like sensory quality of fresh-cut cantaloupes with insignificant overall acceptability compared to the control.
A search is presented for an excess of events with heavy-flavor quark pairs (
t
t ¯
and
b
b ¯
) and a large imbalance in transverse momentum in data from proton-proton collisions at a center-of-mass energy of 13
TeV
. The data correspond to an integrated luminosity of 2.2
fb
- 1
collected with the CMS detector at the CERN LHC. No deviations are observed with respect to standard model predictions. The results are used in the first interpretation of dark matter production in
t
t ¯
and
b
b ¯
final states in a simplified model. This analysis is also the first to perform a statistical combination of searches for dark matter produced with different heavy-flavor final states. The combination provides exclusions that are stronger than those achieved with individual heavy-flavor final states.
A search for a heavy neutral lepton N of Majorana nature decaying into a W boson and a charged lepton is performed using the CMS detector at the LHC. The targeted signature consists of three prompt charged leptons in any flavor combination of electrons and muons. The data were collected in proton-proton collisions at a center-of-mass energy of 13 TeV, with an integrated luminosity of 35.9 fb^{-1}. The search is performed in the N mass range between 1 GeV and 1.2 TeV. The data are found to be consistent with the expected standard model background. Upper limits are set on the values of |V_{eN}|^{2} and |V_{μN}|^{2}, where V_{ℓN} is the matrix element describing the mixing of N with the standard model neutrino of flavor ℓ. These are the first direct limits for N masses above 500 GeV and the first limits obtained at a hadron collider for N masses below 40 GeV.
A search for a signal consistent with the type-III seesaw mechanism in events with three or more electrons or muons is presented. The data sample consists of proton-proton collisions at sqrt[s]=13 TeV collected by the CMS experiment at the LHC in 2016 and corresponds to an integrated luminosity of 35.9 fb^{-1}. Selection criteria based on the number of leptons and the invariant mass of oppositely charged lepton pairs are used to distinguish the signal from the standard model background. The observations are consistent with the expectations from standard model processes. The results are used to place limits on the production of heavy fermions of the type-III seesaw model as a function of the branching ratio to each lepton flavor. In the scenario of equal branching fractions to each lepton flavor, heavy fermions with masses below 840 GeV are excluded. This is the most sensitive probe to date of the type-III seesaw mechanism.
The production of bioprotein by coconut dregs is found to be a novel and cheaper carbon source.
Media optimization for bioprotein production from coconut dregs through solid state fermentation has been developed as a one of the approaches to increase the protein production. The utilization of these coconut dregs provides as alternative substrates and also helps in solving waste disposal problems. Among the seven media components, only NH4NO3, MgSO4.7H2O and CuSO4.5H2O were found to be significantly affecting the bioprotein production.
Polygonum minus (Polygonaceae), generally known as 'kesum' in Malaysia is among the most commonly used food additive, flavoring agent and traditionally used to treat stomach and body aches. Raw or cooked leaves of P. minus are used in digestive disorders in the form of a decoction and the oil is used for dandruff. The pharmacological studies on P. minus have demonstrated antioxidant, in vitro LDL oxidation inhibition, antiulcer activity, analgesic activity, anti-inflammatory activity, in vitro antiplatelet aggregation activity, antimicrobial activity, digestive enhancing property and cytotoxic activity. The spectroscopic studies of essential oil of P. minus showed the presence of about 69 compounds, which are responsible for the aroma. The phytochemical studies showed presence of flavonoids and essential oils. This review is an effort to update the botanical, phytochemical, pharmacological and toxicological data of the plant P. minus.
Objectives. To systematically review articles investigating the relationship between religion and spirituality (R/S) and fruit, vegetable, and fat intake. Methods. PubMed, CINAHL, and PsycInfo were searched for studies published in English prior to March 2013. The studies were divided into two categories: denominational studies and degree of R/S studies. The degree of R/S studies was further analyzed to (1) determine the categories of R/S measures and their relationship with fruit, vegetable, and fat intake, (2) evaluate the quality of the R/S measures and the research design, and (3) determine the categories of reported relationship. Results. Thirty-nine studies were identified. There were 14 denominational studies and 21 degree of R/S studies, and 4 studies were a combination of both. Only 20% of the studies reported validity and 52% reported reliability of the R/S measures used. All studies were cross-sectional, and only one attempted mediation analysis. Most studies showed a positive association with fruit and vegetable intake and a mixed association with fat intake. Conclusion. The positive association between R/S and fruit and vegetable intake may be one possible link between R/S and positive health outcome. However, the association with fat intake was mixed, and recommendations for future research are made.