Displaying publications 1 - 20 of 75 in total

Abstract:
Sort:
  1. Babji AS, Embong MS, Woon WW
    Bull Environ Contam Toxicol, 1979 Dec;23(6):830-6.
    PMID: 519067
    Matched MeSH terms: Spectrophotometry, Atomic
  2. Huat LH, Zakariya D, Eng KH
    Arch. Environ. Health, 1983 7 1;38(4):205-9.
    PMID: 6614999
    This study was conducted to determine lead concentrations in breast milk among urban and rural mothers in Malaysia, and to determine if lead absorption among urban maternal populations in Malaysia poses a potential health hazard to infants through breastfeeding. Milk samples, which were collected from 89 urban and 91 rural mothers, were analyzed by flameless atomic absorption spectrophotometry. The mean lead level in urban samples was 0.0253 microgram/ml, which was significantly higher than that of the rural samples (0.0211 microgram/ml). The estimated daily lead intake of breast-fed infants in Malaysia was well below proposed tolerable levels. There also appeared to be no specific pattern in the milk lead levels at different periods of lactation. The significance of the higher milk lead concentrations in urban mothers is also discussed.
    Matched MeSH terms: Spectrophotometry, Atomic
  3. Chong C
    Talanta, 1986 Jan;33(1):91-4.
    PMID: 18964038
    A simple atomic-absorption spectrophotometry method is described for the determination of silver, bismuth, cadmium, copper, iron, nickel and zinc in lead- and tin-base solders and white-metal bearing alloys, with use of a single sample solution. The sample is dissolved in a mixture of hydrobromic acid and bromine, then fumed with sulphuric acid. The lead sulphate is dissolved in concentrated hydrochloric acid. The method is particularly suitable for the determination of silver and bismuth, which are co-precipitated with lead sulphate. The other elements can also be determined after removal of the lead sulphate by filtration.
    Matched MeSH terms: Spectrophotometry, Atomic
  4. Wong MK, Koh LL
    Biol Trace Elem Res, 1986 Aug;10(2):91-7.
    PMID: 24254355 DOI: 10.1007/BF02795561
    Ninety-nine samples of common Chinese medicines were purchased from Chinese medical shops in Singapore and Malaysia and analyzed for mercury, lead, copper, cadmium, cobalt, iron, and nickel. The majority of these medicines were manufactured in China, Hong Kong, and Malaysia. A few of them were of Singapore and Taiwan origin. Atomic absorption method (both flame and flameless) was used for the analyses. Mercury was found to be present in high concentrations in several of the medicines that were for oral consumption.
    Matched MeSH terms: Spectrophotometry, Atomic
  5. Yusof AM, Rahman NA, Wood AK
    Biol Trace Elem Res, 1994;43-45:239-49.
    PMID: 7710833
    Trace elements, such as As, Co, Cr, Hg, Sb, and Zn, were determined by neutron activation analysis (NAA), whereas Cd, Cu, and Pb were determined by graphite furnace atomic absorption spectroscopy (GFAAS) in clam, crab, prawn, swamp cerith, and mussel samples after digestion by microwave heating under controlled conditions before eluting the solutions through a column of a chelating resin, Chelex-100. The standard used in the determination of percentage volatile elements retained by microwave digestion and also in the activation process was Lobster Hepatopancreas TORT-1, whereas known mixed standards were prepared from nitrate salts to determine the efficiency of the separation procedure at a controlled pH. Mercury and lead detected in crabs exceeded the maximum permissible level. Some species also showed a high affinity toward certain elements, and their levels of accumulation in the tissues of these species corresponded with the concentration of these elements in sediments, especially at sites in the vicinity of an industrial zone.
    Matched MeSH terms: Spectrophotometry, Atomic
  6. Lui JL, Tong SL, Teh SK
    Ann Dent, 1994;1(1):1-4.
    MyJurnal
    The mercury controversy related to dental amalgam is still continuing. In Malaysia, part of, this controversy has been attributed to a recently - introduced dental amalgam claimed to be non-mercury releasing and causing no mercury toxicity. The purpose of this study was to investigate whether this amalgam, Composil, was indeed non-mercury releasing. Six specimens each of Composil and a control (GS-80) were incubated at 3TC in deionised-distilled water. The daily mercury release was determined over a four-week study period using the stationary cold-vapour atomic absorption spectrometric method. The mean mercury release of Composil was 30.9 Ilg/cm2/ 24hr whilst that of GS-80 was 0.9 Ilg/cm2124hr and the difference was found to be highly significant (P < 0.00l). Results of this study therefore did not substantiate the manufacturer's claim. The release of mercury from amalgam restorations and their implications in clinical practice were also discussed.
    Matched MeSH terms: Spectrophotometry, Atomic
  7. Ahmad M, Narayanaswamy R
    Talanta, 1995 Sep;42(9):1337-44.
    PMID: 18966361
    Chrome azurol S immobilised on XAD-2 has been used in this study as a reagent phase for the development of an optical fibre Al(III) sensor. Using a kinetic approach, this sensor was able to give a linear response in the Al(III) concentration range of 1.3 x 10(-5)-2.0 x 10(-4) M with a limit of detection of 1.0 x 10(-4) M. The optimum responses were obtained at pH 6.0 and when the solution was stirred. The sensor response was found to have a repeatability and reproducibility of 1.6% and 5.8%, respectively. The results obtained for Al(III) determination in aqueous sample were in good agreement with those obtained using graphite furnace-atomic absorption spectrometry.
    Matched MeSH terms: Spectrophotometry, Atomic
  8. Noordin MM, Zhang SS, Rahman SO, Haron J
    Vet Hum Toxicol, 2000 Oct;42(5):276-9.
    PMID: 11003117
    Samples of Brachiaria decumbens collected from 5 farms representing the Peninsular Malaysia were subjected to selected trace mineral and phytate analyses to explain the pathogenesis of B decumbens intoxication. Concentrations of Cu, Zn, Fe and Mo were comparable to other grasses while that of phytate was low. The molar ratios of Cu:Zn, Cu:Mo, and Cu:Fe warrant that Cu deficiency is involved in the toxicity of B decumbens. This might aggravate the development of photosensitization of unpigmented or lightly pigmented areas of affected animals. The Zn:phytate ratio could predispose to Zn deficiency during intoxication.
    Matched MeSH terms: Spectrophotometry, Atomic
  9. Shafie, O., Sanimah, A.R.
    MyJurnal
    The status ofhve l1eavy metals: cadmium, lead copper, zinc and mercury were determined in seafood and its products imported_ti·om Thailand via Bukit Kayu Hiram, Kedah, Flame Atomic Absorption Spectrophotometer was used to determine the level of these heary metals except for mercury, where the cold vapor technique was used, Randomized sampling was done according to a predetermined sampling plan based on the previous years consignments. Data collected were compared with the maximum permitted level of -metal contaminants in fish and fish products- ofthe Fourteenth Schedule (Regulation 38) of Food Act I983 and Food Regulations I 985 to ascertain compliance. lt was noted form this study, that the level of metals detected in seafood and its products had a very wide range, The levels detected for cadmium was at a range of 0. 00] - 3.9/2, 0.07 — 0.29, 0,04 - 4,4 mg/kg in fish, shellfish and cuttlefish respectivelv. In general, cadmium level in some samples was notably higher particularly in shellfish. All samples had lead level less than the permitted value except for fish where the highest value detected was 3.28 mg/kg. The level of copper and zinc was higher than the permitted value in octopus, prawn and crab, Mercury level in all samples analvzed was found to be below the detection level. As for fish samples, zinc level was found to be higher whereas copper was within the limit. However, it was also noted that the level of all the heavy metals in jiozen jish was within the permitted limit.
    Matched MeSH terms: Spectrophotometry, Atomic
  10. Ang HH, Lee EL, Matsumoto K
    Hum Exp Toxicol, 2003 Aug;22(8):445-51.
    PMID: 12948085 DOI: 10.1191/0960327103ht382oa
    In Malaysia, the phase 3 registration for traditional medicines was implemented on 1 January 1992 under the Control of Drugs and Cosmetics Regulation 1984, emphasizing quality, efficacy and safety (including the detection of the presence of heavy metals) in all pharmaceutical dosage forms of traditional medicine preparations. Therefore, a total of 100 products in various pharmaceutical dosage forms of a herbal preparation, were analysed for lead content using atomic absorption spectrophotometer. Results showed that 8% (eight products) possessed 10.64-20.72 ppm of lead, and therefore, do not comply with the quality requirement for traditional medicines in Malaysia. One of these products, M-Tongkat Ali (exhibited 10.64 +/-0.37 ppm of lead), was in fact already registered with the DCA Malaysia. The rest, Sukarno Tongkat Ali, Eurycoma Madu, Super Pill Tongkat Ali, Force Pill Tongkat Ali, Tender Pill Tongkat Ali, Super Pill Tongkat Ali Plus and Great Pill Tongkat Ali Plus have not registered with the DCA Malaysia and exhibited 12.24-20.72 ppm of lead. Although this study showed that only 92% of the products complied with the quality requirement for traditional medicines in Malaysia, however, they cannot be assumed safe from lead contamination because of batch-to-batch inconsistency.
    Matched MeSH terms: Spectrophotometry, Atomic
  11. Zailina, H., Junidah, R., Jamal Hisham, H.
    MyJurnal
    Blood lead concentration and 6»aminolevulinic acid in urine were used as indicator for lead exposure among school children in an industrial area south of the peninsular Malaysia. A group of 1 00 Malay children which consist of 48 boys and 52 girb with the age range of 61/2 to 81/2 years from a primary school were selected as chiMren. Blood samples were collected and analyzed with Graphite Furnace Atomic Absorption Spectrophotometer. The urine 6-aminolevulinic acid concentrations were measured with UV/VIS Spectrophotometer. The mean blood lead was 3.75ug/dl. Based on the biological index, 76% of the children are in the “normal range" (
    Matched MeSH terms: Spectrophotometry, Atomic
  12. Mimala Arasaratnam, Zailina Hashim, Shamsul Bahari Shamsudin
    MyJurnal
    A cross-sectional study was conducted on 83 female electronics factory workers. The respondents comprised 50 exposed workers who use lead alloy solder and 33 unexposed workers. The objective of this study was to assess the lead exposure of these workers. Breathing zone were sampled using air sampling pumps. Dust samples were collected by wipe method. Venous blood collected and blood pressure were measured. All lead analyses were carried out with Graphite Furnace Atomic Absorption Spectrophotometer. The mean air lead for exposed workers (57 0. ± 0.93 μg/m³) was significantly higher than the unexposed workers (0.0067 ± 0.0045μg/m³) (p
    Matched MeSH terms: Spectrophotometry, Atomic
  13. Ang HH, Lee EL, Cheang HS
    Int J Toxicol, 2004 Jan-Feb;23(1):65-71.
    PMID: 15162849 DOI: 10.1080/10915810490269654
    The DCA (Drug Control Authority), Malaysia, has implemented the phase 3 registration of traditional medicines on 1 January 1992, with special emphasis on the quality, efficacy, and safety (including the presence of heavy metals) in all pharmaceutical dosage forms of traditional medicine preparations. As such, a total of 100 products in various pharmaceutical dosage forms of a herbal preparation, containing Tongkat Ali, were analyzed for mercury content using cold vapor atomic absorption spectrophotometer. Results showed that 36% of the above products possessed 0.52 to 5.30 ppm of mercury and, therefore, do not comply with the quality requirement for traditional medicines in Malaysia. Out of these 36 products, 5 products that possessed 1.05 to 4.41 ppm of mercury were in fact have already registered with the DCA, Malaysia. However, the rest of the products that contain 0.52 to 5.30 ppm of mercury still have not registered with the DCA, Malaysia. Although this study showed that only 64% of the products complied with the quality requirement for traditional medicines in Malaysia pertaining to mercury, they cannot be assumed safe from mercury contamination because of batch-to-batch inconsistency.
    Matched MeSH terms: Spectrophotometry, Atomic
  14. Ang HH, Lee KL, Kiyoshi M
    Int J Toxicol, 2005 May-Jun;24(3):165-71.
    PMID: 16040569 DOI: 10.1080/10915810590952942
    The DCA (Drug Control Authority) of Malaysia implemented the phase 3 registration of traditional medicines on 1 January 1992. As such, a total of 100 products in various pharmaceutical dosage forms of a herbal preparation containing Smilax luzonensis, either single or combined preparations, were analyzed for the presence of lead, using atomic absorption spectrophotometry. Results showed that 14% of the above products possessed 10.02 to 21.21 ppm of lead, and, therefore, they failed to comply with the quality requirement for traditional medicines in Malaysia ( <10 ppm). Although this study showed that 86% of the products complied with the quality requirement for traditional medicines in Malaysia pertaining to lead, they cannot be assumed safe from lead contamination because of batch-to-batch inconsistency.
    Matched MeSH terms: Spectrophotometry, Atomic
  15. Ang HH, Lee KL
    Food Chem Toxicol, 2006 Aug;44(8):1245-50.
    PMID: 16567029 DOI: 10.1016/j.fct.2006.01.014
    The DCA (Drug Control Authority), Malaysia has implemented the phase three registration of traditional medicines on 1 January 1992. As such, a total of 100 products in various pharmaceutical dosage forms of a herbal preparation found in Malaysia, containing tongkat Ali hitam, either single or combined preparations, were analyzed for the presence of a heavy toxic metal, mercury, using atomic absorption spectrophotometer, after performing a simple random sampling to enable each sample an equal chance of being selected in an unbiased manner. Results showed that 26% of these products possessed 0.53-2.35 ppm of mercury, and therefore, do not comply with the quality requirement for traditional medicines in Malaysia. The quality requirement for traditional medicines in Malaysia is not exceeding 0.5 ppm for mercury. Out of these 26 products, four products have already registered with the DCA, Malaysia whilst the rest, however, have not registered with the DCA, Malaysia.
    Matched MeSH terms: Spectrophotometry, Atomic
  16. Clark CS, Rampal KG, Thuppil V, Chen CK, Clark R, Roda S
    Environ Res, 2006 Sep;102(1):9-12.
    PMID: 16782088
    Worldwide prohibitions on lead gasoline additives were a major international public health accomplishment, the results of which are still being documented in parts of the world. Although the need to remove lead from paints has been recognized for over a century, evidence reported in this article indicates that lead-based paints for household use, some containing more than 10% lead, are readily available for purchase in some of the largest countries in the world. Sixty-six percent of new paint samples from China, India, and Malaysia were found to contain 5000 ppm (0.5%) or more of lead, the US definition of lead-based paint in existing housing, and 78% contained 600 ppm (0.06%) or more, the limit for new paints. In contrast, the comparable levels in a nearby developed country, Singapore, were 0% and 9%. In examining lead levels in paints of the same brands purchased in different countries, it was found that some brands had lead-based paints in one of the countries and paints meeting US limits in another; another had lead-free paint available in all countries where samples were obtained. Lead-based paints have already poisoned millions of children and likely will cause similar damage in the future as paint use increases as countries in Asia and elsewhere continue their rapid development. The ready availability of lead-based paints documented in this article provides stark evidence of the urgent need for efforts to accomplish an effective worldwide ban on the use of lead in paint.
    Matched MeSH terms: Spectrophotometry, Atomic
  17. Khairiah J, Lim KH, Ahmad-Mahir R, Ismail BS
    Bull Environ Contam Toxicol, 2006 Oct;77(4):608-15.
    PMID: 17123022 DOI: 10.1007/s00128-006-1106-8
    Matched MeSH terms: Spectrophotometry, Atomic
  18. Ang HH, Lee KL
    Int J Toxicol, 2007 Sep-Oct;26(5):433-9.
    PMID: 17963130 DOI: 10.1080/10915810701583036
    The DCA (Drug Control Authority) of Malaysia implemented phase 3 registration of traditional medicines in January 1992 with special emphasis on the quality, efficacy, and safety of all dosage forms of these medicines. For this reason, a total of 100 herbal products containing Smilax myosotiflora were purchased in the Malaysian market and analyzed for mercury content, as mercury is a recognized reproductive toxicant. The products were analyzed using cold vapor atomic absorption spectrophotometry. It was found that 89% of the above products do not exceed 0.5 ppm of mercury. Heavy metal poisoning such as mercury has been associated with traditional medicines. Therefore, it is important that doctors and health care practitioners are aware of these risks and finding ways to minimize them, including questions pertaining to the use of these remedies during the routine taking of a patient's history.
    Matched MeSH terms: Spectrophotometry, Atomic/methods
  19. Ang HH
    Food Chem Toxicol, 2008 Jun;46(6):1969-75.
    PMID: 18328612 DOI: 10.1016/j.fct.2008.01.037
    The Drug Control Authority (DCA) of Malaysia implemented the phase three registration of traditional medicines on 1 January, 1992. A total of 100 products in various pharmaceutical dosage forms of a herbal preparation, containing Eugenia dyeriana, either single or combined preparations (more than one medicinal plant), were analyzed for the presence of lead contamination, using atomic absorption spectrophotometry. These samples were bought from different commercial sources in the Malaysian market, after performing a simple random sampling. Results showed that 22% of the above products failed to comply with the quality requirement for traditional medicines in Malaysia. Although this study showed that 78% of the products fully complied with the quality requirement for traditional medicines in Malaysia pertaining to lead, however, they cannot be assumed safe from lead contamination because of batch-to-batch inconsistency.
    Matched MeSH terms: Spectrophotometry, Atomic
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links