Displaying publications 181 - 200 of 638 in total

Abstract:
Sort:
  1. Hamli H, Hamed NA, Azmai SHS, Idris MH
    Trop Life Sci Res, 2020 Jul;31(2):145-158.
    PMID: 32922672 DOI: 10.21315/tlsr2020.31.2.7
    Pachychilidae is one of the freshwater gastropod family which was previously known under the Potamididae and Thiaridae families. Studies on freshwater gastropods especially on conchcology examinantions are still inadequate compared to marine gastropods. Morphological and morphometric studies of gastropods are practically used to identify and differentiate between species and necessary to complement molecular studies due to its low cost and tolerable resolving power of discrimination. The aim of the current study is to provide information on morphological and morphometric characteristics of Pachychilidae in Bintulu, Sarawak stream. A total of 20 individuals from each species of Sulcospira testudinaria, Sulcospira schmidti, Brotia siamensis, and Tylomelania sp. from Pachychilidae familiy were collected at three different sites from a small stream within the Bintulu area. Fourteen measurement of shell morphometrics were converted into proportioned ratios and analysed for univariate and multivariate analysis. Three shell morphometric (Aperture width, AW; Whorl width, WW2; and, Interior anterior length, AINL) of Pachychilidae indicated significant differences (P < 0.05) between species. However, multivariate analysis revealed that these shell morphometrics are pre-eminent factors to discriminate genus Sulcospira, Brotia and Tylomelania, as well as between Sulcospira species. This current study also suggests that these three characteristics are unique to Sulcospira species due to strong distinction among species. Findings on these three characteristics are significant for Sulcospira spp. as this study is the first shell morphometric report on the Pachychilidae species in Sarawak.
  2. Rashid ESA, Gul A, Yehya WAH, Julkapli NM
    Heliyon, 2021 Jun;7(6):e07267.
    PMID: 34195407 DOI: 10.1016/j.heliyon.2021.e07267
    In this work, the influence of various sulfuric acid (H2SO4) concentration is studied towards the crystallinity, particle size distribution, thermal stability, and morphology of the synthesized nanocellulose (NCC) during the esterification process. Different concentrations of H2SO4 (40%, 58%, 64% and 78%) was utilized to achieve the optimal properties of NCC. The as-produced NCC was characterized by Fourier Transmission Infra-Red (FTIR) analysis that confirmed the attachment of sulphate ions ( SO 4 - 3 ) to C-6 of the glucose ring. Moreover, the hydrogen ions (H+) weakened the C-6 of cellulose chains by attacking the glycosidic linkages resulting in the formation of NCC. The X-Ray Diffraction (XRD) analysis revealed an increase in the crystallinity index with increasing H2SO4 concentration till 78%. NCC represented a needle shaped like structure having a particle size of 10-18 nm in diameter as observed under Atomic Force Microscopy (AFM) and Fourier Emission Scanning Electron Microscopy (FESEM). Furthermore, Dynamic Light Scattering (DSL) analysis recorded the particle size of the NCC as less than 20 nm in diameter. Thus, owing to various H2SO4 concentration the particle size, crystallinity, and features of NCC are substantially affected.
  3. Fahmy O, Shsm H, Lee C, Khairul-Asri MG
    Urol Int, 2021 Aug 25.
    PMID: 34515258 DOI: 10.1159/000518160
    PURPOSE: This study aimed to investigate the effect of preoperative stenting (POS) on the perioperative outcomes of flexible ureterorenoscopy (fURS).

    MATERIALS AND METHODS: A systematic review and meta-analysis was conducted based on the PRISMA statement. From the initially retrieved 609 reports, we excluded the ineligible studies at 2 stages. We only included studies that contained fURS patients with and without POS in the same report. Data of patients who underwent semirigid ureteroscope only were excluded from the analysis. The Newcastle-Ottawa Scale (NOS) system was applied for risk of bias assessment.

    RESULTS: A total of 20 studies including 5,852 patients were involved. 48.5% of the patients had preoperative stent. Stone-free rate was significantly higher with prestenting; odds ratio (OR) was 1.98 (95% CI: 1.51-2.58) (Z = 5.02; p = 0.00001). It also displayed tendency toward lower complications; OR was 0.74 (95% CI: 0.52-1.05) (Z = 1.67; p = 0.09). POS significantly increased the use of ureteral access sheath; OR was 1.49 (95% CI: 1.05-2.13) (Z = 2.22; p = 0.03). Risk of bias assessment showed 13 and 7 studies with low and moderate risk, respectively.

    CONCLUSIONS: POS clearly improves the stone-free rates after fURS. It might reduce the complications, especially ureteral injury. These findings might help solve the current debate and can be useful for urologists during patient counselling for a proper decision-making.

  4. Sadiq RB, Safie N, Abd Rahman AH, Goudarzi S
    PeerJ Comput Sci, 2021;7:e661.
    PMID: 34541308 DOI: 10.7717/peerj-cs.661
    Organizations in various industries have widely developed the artificial intelligence (AI) maturity model as a systematic approach. This study aims to review state-of-the-art studies related to AI maturity models systematically. It allows a deeper understanding of the methodological issues relevant to maturity models, especially in terms of the objectives, methods employed to develop and validate the models, and the scope and characteristics of maturity model development. Our analysis reveals that most works concentrate on developing maturity models with or without their empirical validation. It shows that the most significant proportion of models were designed for specific domains and purposes. Maturity model development typically uses a bottom-up design approach, and most of the models have a descriptive characteristic. Besides that, maturity grid and continuous representation with five levels are currently trending in maturity model development. Six out of 13 studies (46%) on AI maturity pertain to assess the technology aspect, even in specific domains. It confirms that organizations still require an improvement in their AI capability and in strengthening AI maturity. This review provides an essential contribution to the evolution of organizations using AI to explain the concepts, approaches, and elements of maturity models.
  5. Abdul Hadi D, Mansharan Kaur CS, Effat O, Siew SF
    Trop Biomed, 2019 Dec 01;36(4):850-854.
    PMID: 33597457
    Tuberculosis (TB) is a highly infectious disease on the rise caused by the organism Mycobacterium tuberculosis and health care workers working in emergency departments, medical wards and autopsy rooms are in danger of contacting this disease. We present a case of a 42 year old man found dead under a pedestrian bridge with no medical history available. Post mortem computed tomography showed multiple cavities involving upper lobes of both lungs and areas of consolidation in both lung fields raising the suspicion of pulmonary tuberculosis. This was followed by a computed tomography guided lung biopsy and a limited conventional autopsy done in situ in a special high risk autopsy suite with appropriate ventilation. This case highlights the importance of cross sectional imaging which can be coupled with image guided biopsy in cases of infectious disease to reduce the risk of transmission to health care workers.
  6. Bayat H, Omidi M, Rajabibazl M, Sabri S, Rahimpour A
    J Microbiol Biotechnol, 2017 Feb 28;27(2):207-218.
    PMID: 27840399 DOI: 10.4014/jmb.1607.07005
    Clustered regulatory interspaced short palindromic repeats (CRISPR) in association with CRISPR-associated protein (Cas) is an adaptive immune system, playing a pivotal role in the defense of bacteria and archaea. Ease of handling and cost effectiveness make the CRISPR-Cas system an ideal programmable nuclease tool. Recent advances in understanding the CRISPR-Cas system have tremendously improved its efficiency. For instance, it is possible to recapitulate the chronicle CRISPR-Cas from its infancy and inaugurate a developed version by generating novel variants of Cas proteins, subduing off-target effects, and optimizing of innovative strategies. In summary, the CRISPR-Cas system could be employed in a number of applications, including providing model systems, rectification of detrimental mutations, and antiviral therapies.
  7. Khan AH, Bayat H, Rajabibazl M, Sabri S, Rahimpour A
    World J Microbiol Biotechnol, 2017 Jan;33(1):4.
    PMID: 27837408
    Glycosylation represents the most widespread posttranslational modifications, found in a broad spectrum of natural and therapeutic recombinant proteins. It highly affects bioactivity, site-specificity, stability, solubility, immunogenicity, and serum half-life of glycoproteins. Numerous expression hosts including yeasts, insect cells, transgenic plants, and mammalian cells have been explored for synthesizing therapeutic glycoproteins. However, glycosylation profile of eukaryotic expression systems differs from human. Glycosylation strategies have been proposed for humanizing the glycosylation pathways in expression hosts which is the main theme of this review. Besides, we also highlighted the glycosylation potential of protozoan parasites by emphasizing on the mammalian-like glycosylation potential of Leishmania tarentolae known as Leishmania expression system.
  8. Wahab AHA, Saad APM, Syahrom A, Kadir MRA
    Comput Methods Biomech Biomed Engin, 2020 Apr;23(5):182-190.
    PMID: 31910663 DOI: 10.1080/10255842.2019.1709828
    Glenoid perforation is not the intended consequence of the surgery and must be avoided. The analysis on biomechanical aspect of glenoid vault perforation remains unknown. The purpose of this study is to determine the impact of glenoid perforation towards stress distribution and micromotion at the interfaces. Eight glenoid implant models had been constructed with various size, number and type of fixation. A load of 750 N was applied to centre, superior-anterior and superior-posterior area. Implant perforation had minimal impact on stress distribution and micromotion at the interfaces. However, cement survival rate for implant without perforation was the highest with a difference of up to 37% compared to other perforated models. Besides that, implant fixation and high stresses at the implant had more of an impact on implant instability than implant perforation. As a conclusion, glenoid perforation did not influence the stress distribution and micromotion, but, it reduced cement survival rate and increase the stress critical volume.
  9. Faramarzi M, Shishegar M, Tofighi SR, Sharouny H, Rajagopalan R
    Iran J Otorhinolaryngol, 2019 Jan;31(102):11-17.
    PMID: 30783594
    Introduction: There are a few studies that compare the outcomes between primary and revision tympanoplasties. The purpose of the present study was to compare the results of type I tympanoplasty (i.e., synonymous to myringoplasty) and revision myringoplasty based on the closure of tympanic membrane perforation and hearing improvement.

    Materials and Methods: This prospective single-blind study was carried out on a total of 240 patients with tympanic membrane perforation at a tertiary referral center. The subjects underwent primary or revision myringoplasty. Grafting success rate and hearing results were measured and the comparison between the primary and revision groups was drawn.

    Results: Grafting success rate was reported as 96.6% (112 out of 116 cases) for myringoplasty, while in revision myringoplasty the success rate of 78.2% (97 out of 124 patients) was achieved (P=0.001). Speech reception threshold was 23.1±9.2 dB and 24.9±13.1 dB in the primary and revision groups, respectively (P>0.05). However, the percentage of air-bone gap on audiometry≤20 dB were 83.8% and 76% in the primary and revision groups, respectively (P=0.26).

    Conclusion: The findings of the present study have shown that although grafting success was reported significantly better in myringoplasty (tympanoplasty type 1), compared to that in revision myringoplasty, it did not reveal any superiority over revision tympanoplasty regarding the hearing outcomes. No consensus was achieved due to a great number of controversies in the literature.

  10. Almhanawi BH, Khalid B, Ibrahim TA, Tohit ERM
    Porto Biomed J, 2016 12 27;2(1):23-27.
    PMID: 32258580 DOI: 10.1016/j.pbj.2016.11.002
    Highlights: EDTA induces platelet microparticles (PMPs) vesiculation.Sodium citrated tubes are better than EDTA tubes in PMPs analysis.Sodium citrate has a minor impact on platelet structure.

    Abstract: Platelet microparticles (PMPs) are small membrane fragments released from activated platelets in response to various stimuli. PMPs serve as biomarkers for several diseases and conditions and are useful tools for prognostic, diagnostic, and therapeutic purposes. The objective of our study was to compare the direct effects of ethylenediaminetetraacetic acid (EDTA) and sodium citrate anticoagulants on platelet structure and PMP vesiculation using transmission electron microscopy to visualize the morphologic changes in platelets. Micrographs revealed that platelets in the EDTA-anticoagulated tube manifested with significant morphologic changes and induced PMP vesiculation. On the other hand, the sodium citrate-anticoagulated tube showed a normal platelet structure and minor modifications in some cases, with poor indication of PMP vesiculation. In conclusion, EDTA induced platelet activation and PMP vesiculation and represents a major source of artifacts during the pre-analysis steps of PMP vesiculation.

  11. Sharifzadeh G, Hezaveh H, Muhamad II, Hashim S, Khairuddin N
    Mater Sci Eng C Mater Biol Appl, 2020 May;110:110609.
    PMID: 32204060 DOI: 10.1016/j.msec.2019.110609
    Vaginal drug delivery is regarded as a promising route against women-related health issues such as unwanted pregnancies and sexually transmitted infections. However, only a very few studies have been reported on the use of hydrogel rings with low cytotoxicity for vaginal drug delivery applications. Moreover, the effect of nanoparticles on hydrogel vaginal rings has not been clearly evaluated. To overcome these challenges, we hereby developed nanocomposite hydrogel rings based on polyacrylamide-sodium carboxymethyl cellulose-montmorillonite nanoparticles in the ring-shaped aluminum mold for controlled drug delivery. The hydrogel rings were synthesized by using N,N'-methylene bisacrylamide, N,N,N',N'-tetramethyl ethylene diamine, and ammonium persulfate, as a crosslinker, accelerator, and initiator, respectively. The obtained rings were 5.5 cm in diameters and 0.5 cm in rims. Chemical structures of the nanocomposite rings were confirmed by Fourier transform infrared, and Nuclear Magnetic Resonance spectroscopies. Additionally, the swelling ratio of hydrogels was appeared to be adjusted by the introduction of nanoparticles. In vitro release experiment of methylene blue, as a hydrophilic model drug, revealed that the nanocomposite rings could not only reduce burst effect (almost more than twice), but also achieve prolonged release for 15 days in the vaginal fluid simulant which mimic the vaginal conditions at pH of almost 4.2, and a temperature of 37 °C. Importantly, the resultant hydrogel rings with or without various concentrations of montmorillonite showed low cytotoxicity toward human skin fibroblasts. Furthermore, different antibacterial activities against Escherichia coli were observed for various concentrations of montmorillonite in hydrogels. These results suggest the great potential of montmorillonite-based hydrogel rings for vaginal drug delivery.
  12. Mustafa MG, Rajaee AH, Hamli H, A Rahim KA
    PeerJ, 2021;9:e12183.
    PMID: 34721960 DOI: 10.7717/peerj.12183
    The length-weight relationships (LWRs), condition factor (Kn), growth, mortality and exploitation status of three polynemid fishes, i.e., Filimanus xanthonema (Valenciennes, 1831), Polynemus melanochir (Valenciennes, 1831) and Polynemus paradiseus (Linnaeus, 1758) from Batang Lassa River estuary were estimated. Fish samples were caught during April 2019 to September 2020 using the ESBN (locally called Gnian) having 1.25 to 4.00 cm mesh size. The total length (TL) and body weight of each individual fish was measured to the nearest 0.1 cm and 0.01 g respectively. The growth coefficients (b) for F. xanthonema, P. melanochir and P. paradiseus, were 2.880, 2.717 and 2.724 with the R 2 values 0.956, 0.972 and 0.936 respectively. Estimated growth coefficients indicated a negative allometric growth pattern for all three threadfin fishes. To date, information regarding length-weight relationships for F. xanthonema and P. melanochir is insufficient whereas the information is available for P. paradiseus. About 40-48% of fishes exhibited flat or thin body shape (Kn < 1), 48-50% were rounded or fat (Kn > 1) and only 1-3% of fishes showed proportional body shape (Kn = 1). The growth parameters L∞ , K and ϕ' were estimated at 15.75 cm, 0.95 yr-1 and 2.37 for F. xanthonema; 27.61 cm 0.87 yr-1 and 2.82 for P. melanochir; and 27.30 cm, 0.58 yr-1 and 2.64 for P. paradiseus; respectively. The estimated natural mortality (M) included 2.10, 1.69 and 1.30 yr-1; the fishing mortality (F) 0.57, 0.67 and 0.60 yr-1; and exploitation ratio (E) 0.21, 0.28 and 0.31 for F. xanthonema, P. melanochir and P. paradiseus respectively. The study concluded that the stocks are still under exploitation (E < 0.5) condition. However, the studied Batang Lassa estuary could be a potential nursery ground considering the minimum lengths of 5.0, 3.8 and 4.0 cm for F. xanthonema, P. melanochir and P. paradiseus respectively. Therefore, management initiatives are needed to escape juvenile catches.
  13. Md Yusop AH, Al Sakkaf A, Nur H
    J Biomed Mater Res B Appl Biomater, 2022 01;110(1):18-44.
    PMID: 34132457 DOI: 10.1002/jbm.b.34893
    Iron (Fe) and Fe-based scaffolds have become a research frontier in absorbable materials which is inherent to their promising mechanical properties including fatigue strength and ductility. Nevertheless, their slow corrosion rate and low biocompatibility have been their major obstacles to be applied in clinical applications. Over the last decade, various modifications on porous Fe-based scaffolds have been performed to ameliorate both properties encompassing surface coating, microstructural alteration via alloying, and advanced topologically order structural design produced by additive manufacturing (AM) techniques. The recent advent of AM produces topologically ordered porous Fe-based structures with an optimized architecture having controllable pore size and strut thickness, intricate internal design, and larger exposed surface area. This undoubtedly opens up new options for controlling Fe corrosion and its structural strengths. However, the in vitro biocompatibility of the AM porous Fe still needs to be addressed considering its higher corrosion rate due to the larger exposed surface area. This review summarizes the latest progress of the modifications on porous Fe-based scaffolds with a specific focus on their responses on the corrosion behavior and biocompatibility.
  14. Mohammed AH, Ahmad MB, Ibrahim NA, Zainuddin N
    Chem Cent J, 2018 Feb 13;12(1):15.
    PMID: 29442180 DOI: 10.1186/s13065-018-0379-4
    BACKGROUND: The incorporation of two different monomers, having different properties, in the same polymer molecule leads to the formation of new materials with great scientific and commercial importance. The basic requirements for polymeric materials in some areas of biomedical applications are that they are hydrophilic, having good mechanical and thermal properties, soft, and oxygen-permeable.

    RESULTS: A series of 3-(trimethoxysilyl) propyl methacrylate/N-vinyl pyrrolidone (TMSPM/NVP) xerogels containing different concentration of ethylene glycol dimethacrylate (EGDMA) as crosslinking agent were prepared by bulk polymerization to high conversion using BPO as initiator. The copolymers were characterized by FTIR. The corresponding hydrogels were obtained by swelling the xerogels in deionized water to equilibrium. Addition of EGDMA increases the transparency of xerogels and hydrogels. The minimum amount of EGDMA required to produce a transparent xerogel is 1%. All the Swelling parameters, including water content (EWC), volume fraction of polymer (ϕ2) and weight loss during swelling decrease with increasing EGDMA. Young's and shear modulus (E and G) increase as EGDMA increases. The hydrogels were characterized in terms of modulus cross-linking density (veand vt) and polymer-solvent interaction parameters (χ). Thermal properties include TGA and glass transition temperature (Tg) enhance by adding EGDMA whereas the oxygen permeability (P) of hydrogels decreases as water content decrease.

    CONCLUSIONS: This study prepared and studied the properties for new copolymer (TMSPM-co-NVP) contains different amounts of (EGDMA). These copolymers possess new properties with potential use in different biomedical applications. The properties of the prepared hydrogels are fit with the standard properties of materials which should be used for contact lenses.

  15. Mustafa SF, Maarof H, Ahmed R, Abdallah HH
    J Mol Model, 2016 Dec;22(12):290.
    PMID: 27866329
    Diffusion at the atomic or molecular level is a source of many physical, chemical, and biological processes taking place in plentiful materials. This work is an endeavor toward investigating the diffusional behavior of two different type of guests, hexadecane-1,16-diol and hexadecane enclathration in urea tunnel architecture, whereby the correlation of the diffusion mechanism with the guest's structural and conformational properties is explored. To carry out this study, molecular dynamics simulation approach is adopted. It is found that hexadecane-1,16-diol exhibit slower diffusion with an average diffusion coefficient value [Formula: see text], where hexadecane diffuse more rapidly with an average diffusion coefficient value [Formula: see text]. It is also observed that the structural properties influence the guest's travel distance and torsion angle distribution of the trans and gauche conformational proportion. Furthermore, the observed high energy barrier accounted for hexadecane-1,16-diol and low energy barrier for hexadecane along urea tunnel systems was analyzed. The comparison of our obtained results are in close agreement with the available experimental measurements, i.e., gauche proportion properties between two different guest molecules correlate well with Raman spectroscopy investigation on α,ω-dihalogenoalkane/urea inclusion compounds. Our calculations also successfully endorse the structure-property relation between the two systems.
  16. Zare-Zardini H, Taheri-Kafrani A, Amiri A, Bordbar AK
    Sci Rep, 2018 01 12;8(1):586.
    PMID: 29330486 DOI: 10.1038/s41598-017-18938-y
    In this study, Rh2-treated graphene oxide (GO-Rh2), lysine-treated highly porous graphene (Gr-Lys), arginine-treated Gr (Gr-Arg), Rh2-treated Gr-Lys (Gr-Lys-Rh2) and Rh2-treated Gr-Arg (Gr-Arg-Rh2) were synthesized. MTT assay was used for evaluation of cytotoxicity of samples on ovarian cancer (OVCAR3), breast cancer (MDA-MB), Human melanoma (A375) and human mesenchymal stem cells (MSCs) cell lines. The percentage of apoptotic cells was determined by terminal deoxynucleotidyl transferase-mediated dUTP nick-end labeling (TUNEL) assay. The hemolysis and blood coagulation activity of nanostructures were performed. Interestingly, Gr-Arg, Gr-Lys, Gr-Arg-Rh2, and Gr-Lys-Rh2 were more active against cancer cell lines in comparison with their cytotoxic activity against normal cell lines (MSCs) with IC50 values higher than 100 μg/ml. The results of TUNEL assay indicates a significant increase in the rates of TUNEL positive cells by increasing the concentrations of nanomaterials. Results were also shown that aggregation and changes of RBCs morphology were occurred in the presence of GO, GO-Rh2, Gr-Arg, Gr-Lys, Gr-Arg-Rh2, and Gr-Lys-Rh2. Note that all the samples had effect on blood coagulation system, especially on PTT. All nanostrucure act as antitumor drug so that binding of drugs to a nostructures is irresolvable and the whole structure enter to the cell as a drug.
  17. Mohd Radzi SF, Hassan MS, Mohd Radzi MAH
    BMC Med Inform Decis Mak, 2022 Nov 24;22(1):306.
    PMID: 36434656 DOI: 10.1186/s12911-022-02050-x
    BACKGROUND: In healthcare area, big data, if integrated with machine learning, enables health practitioners to predict the result of a disorder or disease more accurately. In Autistic Spectrum Disorder (ASD), it is important to screen the patients to enable them to undergo proper treatments as early as possible. However, difficulties may arise in predicting ASD occurrences accurately, mainly caused by human errors. Data mining, if embedded into health screening practice, can help to overcome the difficulties. This study attempts to evaluate the performance of six best classifiers, taken from existing works, at analysing ASD screening training dataset.

    RESULT: We tested Naive Bayes, Logistic Regression, KNN, J48, Random Forest, SVM, and Deep Neural Network algorithms to ASD screening dataset and compared the classifiers' based on significant parameters; sensitivity, specificity, accuracy, receiver operating characteristic, area under the curve, and runtime, in predicting ASD occurrences. We also found that most of previous studies focused on classifying health-related dataset while ignoring the missing values which may contribute to significant impacts to the classification result which in turn may impact the life of the patients. Thus, we addressed the missing values by implementing imputation method where they are replaced with the mean of the available records found in the dataset.

    CONCLUSION: We found that J48 produced promising results as compared to other classifiers when tested in both circumstances, with and without missing values. Our findings also suggested that SVM does not necessarily perform well for small and simple datasets. The outcome is hoped to assist health practitioners in making accurate diagnosis of ASD occurrences in patients.

  18. Teo KF, Nor MM, Mohamed AM, Pritam HMH
    Anat Cell Biol, 2022 Dec 31;55(4):433-440.
    PMID: 36245239 DOI: 10.5115/acb.22.081
    This study aimed to investigate the general mandibular symphysis (MS) shape variation among Class III skeletal base, using geometric morphometric analysis. Pre-treatment lateral cephalometric radiographs of 254 patients aged 11-40 years old, with Class III skeletal base (ANB <1°) and lower incisor angle (<99°) were included. Nine-landmarks with x and y coordinates were identified on MS using TPSDig2 software, then exported into Morpho J for shape and statistical analysis. Principal component analysis showed that three main shape dimensions with a total variance of 74.6% represented the majority variation of samples. Procrustes Anova showed the shape of MS in Class III skeletal base to be mainly influenced by gonial angle, incisor inclination and sex (P<0.0001). Canonical variate analysis showed that high gonial angle groups had significantly narrower and elongated MS whereas low gonial angle groups had wider, bulbous and rounded MS (P<0.0001). The ratio of alveolar part to basal part was 1:5 in low gonial angle and 2:3 in high gonial angle. Males had significantly taller MS with narrower B point area compared to females (P<0.0001). Retroclined incisors exhibited taller and retroclined alveolar parts (P<0.0001). The shape of MS in Class III skeletal base varied at the alveolar part, basal part or both and it is influenced by gonial angle, incisor inclination and sex. Hence, understanding the shape variation of MS is important to aid orthodontic treatment planning.
  19. Adnan N, Nordin SM, Rahman I, Amini MH
    Environ Sci Pollut Res Int, 2017 Aug;24(22):17955-17975.
    PMID: 28612311 DOI: 10.1007/s11356-017-9153-8
    With the rising concern about climate change, there has been an increased public awareness that has resulted in new government policies to support scientific research for mitigating these problems. Malaysia is among the major energy-intense countries and is under an excessive burden to advance its energy efficiency and to also work towards the reduction of its carbon emission. Plug-in hybrid electric vehicles (PHEVs) have the potential to lessen the carbon emission and gasoline consumption in order to alleviate environmental problems. Most of the energy problems linked to the increasing transportation pollution are now being reduced with the solution of the adoption of PHEVs. PHEVs are seen as a solution to cut carbon emission, which prevents environmental damages. Furthermore, PHEVs' driving range and performance can be comparable to the other hybrid vehicles as well as the conventional IC engines that have gasoline and diesel tanks. Thus, many efforts are being initiated to promote the use of PHEVs as an innovative and affordable transportation system. In order to achieve making the consumers aware of the adoption of PHEVs, we used a model which is based on the extended theory of planned behavior (TPB). This review is based on the factors affecting the adoption of PHEVs among Malaysian consumers. The model takes into account the ten key features that influence the adoption of PHEVs, such as environmental concern, personal norm, attitude, vehicle ownership costs, driving range, charging time, intention, subjective norm, perceived behavioral control, and personal norm. All these constructs are drivers towards the adoption of PHEVs. These factors affect the relationship between the adoption of PHEVs and how consumers intend to protect the environment. This review is based on improving how the "attitude-action" gap is understood as it is an important element for further studies on PHEVs. The aim of the research is to come up with a framework that examines how to modify the consumer's environmental concerns in acquiring PHEVs. This will pave the way for more academic research and future works that can emphasize how to obtain empirical results. The authors' recommendation is that, before a consumer's behavior is assessed and considered, an observation of the current technology is needed with methods and knowledge of the existing technology adoption aspect.
  20. Said AH, Md Nor MZ, Che Yusof MD
    PMID: 37814671 DOI: 10.51866/cr.278
    Gastroschisis may lead to serious congenital disability, as prolonged exposure to the amniotic fluid could compromise the mesenteric blood flow and irritate the foetal intestinal wall. The consequences of gastroschisis include spontaneous preterm birth, growth restriction and foetal demise. Awareness of this disease is essential, as a high mortality rate is linked to inadequate initial therapy. Early detection of the disease, mainly by primary care physicians as the initial point of contact, is crucial to improve the course of the condition through early monitoring and referral to tertiary care centres. With this case report, we hope to highlight the need of detecting gastroschisis before to the third trimester of pregnancy for better readiness, especially in primary care settings located far from tertiary centres.
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links