PURPOSE: A Central Composite Rotatable Design (CCRD) of Response Surface Methodology (RSM) was used purposely to optimize process parameters conditions for formulating nanoemulsion containing aripiprazole using high emulsification methods.
METHODS: This design is used to investigate the influences of four independent variables (overhead stirring time (A), shear rate (B), shear time (C), and the cycle of high-pressure homogenizer (D)) on the response variable namely, a droplet size (Y) of nanoemulsion containing aripiprazole.
RESULTS: The optimum conditions suggested by the predicted model were: 120 min of overhead stirring time, 15 min of high shear homogenizer time, 4400 rpm of high shear homogenizer rate and 11 cycles of high-pressure homogenizer, giving a desirable droplet size of nanoemulsion containing aripiprazole of 64.52 nm for experimental value and 62.59 nm for predicted value. The analysis of variance (ANOVA) showed the quadratic polynomial fitted the experimental values with F-value (9.53), a low p-value (0.0003) and a non-significant lack of-fit. It proved that the models were adequate to predict the relevance response. The optimized formulation with a viscosity value of 3.72 mPa.s and pH value of 7.4 showed good osmolality value (297 mOsm/kg) and remained stable for three months in three different temperatures (4°C, 25°C, and 45°C).
CONCLUSION: This proven that response surface methodology is an efficient tool to produce desirable droplet size of nanoemulsion containing aripiprazole for parenteral delivery application.
METHODS: This cross-sectional study involved third- and fourth-year pharmacy students at the International Islamic University Malaysia. A validated self-administered questionnaire was distributed to students who had taken a vOSCE a week before.
RESULTS: Out of the 253 students who were approached, 231 (91.3%) completed the questionnaire. More than 75% of the participants agreed that the instructions and preparations were clear and helpful in familiarizing them with the vOSCE flow. It was found that 53.2% of the respondents were satisfied with the flow and conduct of the vOSCE. However, only approximately one-third of the respondents believed that the tasks provided in the vOSCE were more convenient, less stressful, and easier to perform than those in the conventional OSCE. Furthermore, 49.7% of the students favored not having a vOSCE in the future when conducting a conventional OSCE becomes feasible again. Internet connection was reported as a problem hindering the performance of the vOSCE by 51.9% of the participants. Students who were interested in clinical pharmacy courses were more satisfied than other students with the preparation and operation of the vOSCE, the faculty support, and the allocated time.
CONCLUSION: Students were satisfied with the organization and operation of the vOSCE. However, they still preferred the conventional OSCE over the vOSCE. These findings might indicate a further need to expose students to telehealthcare models.
METHODS: We conducted a comprehensive cross-sectional study across multiple centers in Iraq from April to September 2021. Our cohort consisted of 404 women who had a mastectomy for breast cancer treatment, 154 of whom also chose to have BR. Utilizing the European Organisation for Research and Treatment of Cancer's (EORTC) tools specifically, select domains from EORTC QLQ-BR23, QLQ-C30, and QLQ-BRECON23-we evaluated various facets of their QoL.
RESULTS: The mean QoL score was 54 out of 100, with patients who did not undergo BR reporting slightly higher scores (55) compared to those who did (52). Notably, social and sexual functioning scores were statistically superior in the non-BR group. Satisfaction with surgery, sexual function, and breast aesthetics were the lowest rated aspects among BR patients, indicating a considerable gap between expectations and outcomes. Marital status and the type of mastectomy notably influenced body image and sexual function. A significant portion of patients (100 out of 250) opted out of BR due to recurrence concerns, while 26.2% (106 out of 154) pursued BR to restore their pre-mastectomy physique.
CONCLUSION: Contrary to the anticipated benefits of BR, our findings suggest that women who underwent the procedure reported a lower QoL compared to those who did not. The outcomes highlight the discrepancy between expected and actual benefits of BR, suggesting a pressing need for comprehensive rehabilitation programs. These programs should aim to enhance the QoL for post-mastectomy patients and provide in-depth counseling to align expectations with the potential realities of BR.
METHODS AND ANALYSIS: Scopus, CINAHL, Academic Search Complete, Cochrane Library, MEDLINE and Psychology and Behavioral Sciences Collection databases were selected. Screening was conducted independently by at least two authors and the decision for inclusion was done through discussion or involvement of an arbiter against a predetermined criteria. Included articles will be evaluated for quality using A MeaSurement Tool to Assess systematic Reviews and Risk of Bias in Systematic Review tools, while primary systematic review articles will be cross-checked and reported for any overlapping using the 'corrected covered area' method. Only narrative synthesis will be employed according to the predefined themes into two major dimensions-theory and knowledge generation (focusing on cognitive taxonomy due to its ability to be generalised across disciplines), and clinical-based competence (focusing on psychomotor and affective taxonomies due to discipline-specific influence). The type of technology used will be identified and extracted.
ETHICS AND DISSEMINATION: The OoSR involves analysis of secondary data from published literature, thus ethical approval is not required. The findings will provide a valuable insight for policymakers, stakeholders, and researchers in terms of technology-based learning implementation and gaps identification. The findings will be published in several reports due to the extensiveness of the topic and will be disseminated through peer-reviewed publications and conferences.
PROSPERO REGISTRATION NUMBER: CRD4202017974.
METHODS: This is a post hoc analysis of a cluster-randomized clinical trial that assesses the effect of implementing a feeding protocol on mortality in critically ill patients. Patients who stayed in the ICUs for at least 7 days and received exclusive EN were included in this analysis. Multivariable Cox hazard regression models and restricted cubic spline models were used to assess the relationship between the different doses of EN delivery and 28-day mortality. Subgroups with varying lactate levels at enrollment were additionally analyzed to address the potential confounding effect brought in by the presence of shock-related hypoperfusion.
RESULTS: Overall, 1322 patients were included in the analysis. The median (interquartile range) daily energy and protein delivery during the first week of enrollment were 14.6 (10.3-19.6) kcal/kg and 0.6 (0.4-0.8) g/kg, respectively. An increase of 5 kcal/kg energy delivery was associated with a significant reduction (approximately 14%) in 28-day mortality (adjusted hazard ratio [HR] = 0.865, 95% confidence interval [CI]: 0.768-0.974, P = 0.016). For protein intake, a 0.2 g/kg increase was associated with a similar mortality reduction with an adjusted HR of 0.868 (95% CI 0.770-0.979). However, the benefits associated with enhanced nutrition delivery could be observed in patients with lactate concentration ≤ 2 mmol/L (adjusted HR = 0.804 (95% CI 0.674-0.960) for energy delivery and adjusted HR = 0.804 (95% CI 0.672-0.962) for protein delivery, respectively), but not in those > 2 mmol/L.
CONCLUSIONS: During the first week of critical illness, enhanced nutrition delivery is associated with reduced mortality in critically ill patients receiving exclusive EN, only for those with lactate concentration ≤ 2 mmol/L.
TRIAL REGISTRATION: ISRCTN12233792, registered on November 24, 2017.
METHODS: This randomized trial was conducted in a tertiary university hospital in Malaysia from September 2020 to February 2022. A total of 330 nulliparous women at term with unripe cervices (Bishop score ≤5), singleton viable fetus in cephalic presentation, reassuring preinduction fetal heart rate tracing and intact membranes who underwent planned outpatient Foley catheter induction of labor (IOL) were included. Women were randomized to expectant or immediate return to hospital if the Foley was spontaneously expelled at home before their scheduled hospital admission the following day. Primary outcomes were amniotomy-titrated oxytocin infusion to delivery interval and maternal satisfaction on the induction process (assessed by 0-10 visual numerical rating scale [VNRS]).
RESULTS: Amniotomy-titrated oxytocin infusion to delivery interval was 8.7 ± 4.1 versus 8.9 ± 3.9 h, P = 0.605 (mean difference - 0.228 95% CI: -1.1 to +0.6 h) and maternal satisfaction VNRS score was median (interquartile range) 8 (7-9) versus 8 (7-9), P = 0.782. Early return to hospital rates were 37/165 (22.4%) versus 72/165 (43.6%), RR 0.51 (95% CI: 0.37-0.72), P ≤ 0.001, Cesarean delivery rates were 80/165 (48.5%) versus 80/165 (48.5%), RR 1.00 (95% CI: 0.80-1.25), P = 1.00 and duration of hospital stay was 54.4 ± 22.9 versus 56.7 ± 22.8 h, P = 0.364 for the expectant versus immediate return groups respectively.
CONCLUSION: In outpatient Foley catheter IOL, expectant compared to immediate return to hospital following Foley dislodgement results in similarly high maternal satisfaction. The amniotomy-titrated oxytocin to delivery duration is non-inferior with expectant management.
METHODS: The system components and hand prototypes involve the anthropometry, CAD design and prototyping, biomechatronics engineering together with the prosthetics. The modeler construction of the system develop allows the ultrasonic sensors that are placed on the shoulder to generate the wrist movement of the prosthesis. The kinematics of wrist movement, which are the pronation/supination and flexion/extension were tested using the motion analysis and general motion of human hand were compared. The study also evaluated the require degree of detection for the input of the ultrasonic sensor to generate the wrist movements.
RESULTS: The values collected by the vicon motion analysis for biomechatronics prosthesis system were reliable to do the common tasks in daily life. The degree of the head needed to bend to give the full input wave was about 45°-55° of rotation or about 14 cm-16 cm. The biomechatronics wrist prosthesis gave higher degree of rotation to do the daily tasks but did not achieve the maximum degree of rotation.
CONCLUSION: The new development of using sensor and actuator in generating the wrist movements will be interesting for used list in medicine, robotics technology, rehabilitations, prosthetics and orthotics.