MATERIALS AND METHODS: Sixmaster dies were duplicated from the prepared maxillary first premolar tooth using nonprecious metal alloy (Wiron 99). Ten copings of 0.6 mm thickness were fabricated from each type of ceramic, for a total of thirty copings. Two master dies were used for each group, and each of them was used to lute five copings. All groups were cemented with resin luting cement Panavia F according to manufacturer's instructions and received a static load of 5 kg during cementation. After 24 hours of distilled water storage at 37 degrees C, the copings were vertically compressed using a universal testing machine at a crosshead speed of 1 mm/min.
RESULTS: The results of the present study showed the following mean loads at fracture: Turkom-Cera (2184 +/- 164 N), In-Ceram (2042 +/- 200 N), and Procera AllCeram (1954 +/- 211 N). ANOVA and Scheffe's post hoc test showed that the mean load at fracture of Turkom-Cera was significantly different from Procera AllCeram (p < 0.05). Scheffe's post hoc test showed no significant difference between the mean load at fracture of Turkom-Cera and In-Ceram or between the mean load at fracture of In-Ceram and Procera AllCeram.
CONCLUSION: Because Turkom-Cera demonstrated equal to or higher loads at fracture than currently accepted all-ceramic materials, it would seem to be acceptable for fabrication of anterior and posterior ceramic crowns.
OBJECTIVES: The aim of this study was to compare the biaxial flexural strength of three core ceramic materials.
MATERIAL AND METHODS: Three groups of 10 disc-shaped specimens (16 mm diameter x 1.2 mm thickness - in accordance with ISO-6872, 1995) were made from the following ceramic materials: Turkom-Cera Fused Alumina [(Turkom-Ceramic (M) Sdn Bhd, Puchong, Selangor, Malaysia)], In-Ceram (Vita Zahnfabrik, Bad Säckingen, Baden-Württemberg, Germany) and Vitadur-N (Vita Zahnfabrik, Bad Säckingen, Baden-Württemberg, Germany), which were sintered according to the manufacturer's recommendations. The specimens were subjected to biaxial flexural strength test in an universal testing machine at a crosshead speed of 0.5 mm/min. The definitive fracture load was recorded for each specimen and the biaxial flexural strength was calculated from an equation in accordance with ISO-6872.
RESULTS: The mean biaxial flexural strength values were: Turkom-Cera: 506.8 ± 87.01 MPa, In-Ceram: 347.4 ± 28.83 MPa and Vitadur-N: 128.7 ± 12.72 MPa. The results were analyzed by the Levene's test and Dunnett's T3 post-hoc test (SPSS software V11.5.0 for Windows, SPSS, Chicago, IL, USA ) at a preset significance level of 5% because of unequal group variances (P<0.001). There was statistically significant difference between the three core ceramics (P<0.05). Turkom-Cera showed the highest biaxial flexural strength, followed by In-Ceram and Vitadur-N.
CONCLUSIONS: Turkom-Cera core had significantly higher flexural strength than In-Ceram and Vitadur-N ceramic core materials.
AIMS: To determine the usefulness of immunohistochemical techniques and FISH of the tumour suppressor TP 53 gene to identify microinvasion in marginal tissue sections and to relate the possible correlation between protein expression and genetic aberrations in OSCC cases in Malaysia.
METHODS: Immunohistochemistry and FISH of TP 53 genes were applied on 26 OSCC formalin fixed paraffin embed (FFEP) blocks selected from two oral cancer referral centers in Malaysia.
RESULTS: For p53 protein immunohistochemistry, 96% of the 26 OSCC studied showed positive immunostaining at the excision margins. In FISH assay, 48.9±9.7% of the cancerous cells were monoploid for p53 probe signals, 41.0±9.5 % were diploid, and 10.2±7.8 % were polyploid. A correlation between p53 immunostaining and TP53 gene aberrations was noted (p< 0.05).
CONCLUSIONS: Immunohistochemical analysis of p53 protein expression and FISH of TP53 gene could be applied as screening tool for microinvasion of OSCC.
AIM: To evaluate the shear bond strength of Zinc phosphate cement Elite, glass ionomer cement Fuji I, resin-modified glass ionomer cement Fuji Plus and resin luting cement Panavia-F to Turkom-Cera all-ceramic material.
MATERIALS AND METHODS: Turkom-Cera was used to form discs 10mm in diameter and 3 mm in thickness (n = 40). The ceramic discs were wet ground, air - particle abraded with 50 - μm aluminium oxide particles and randomly divided into four groups (n = 10). The luting cement was bonded to Turkom-Cera discs as per manufacturer instructions. The shear bond strengths were determined using the universal testing machine at a crosshead speed of 0.5 mm/min. The data were analysed using the tests One Way ANOVA, the nonparametric Kruskal - Wallis test and Mann - Whitney Post hoc test.
RESULTS: The shear bond strength of the Elite, Fuji I, Fuji Plus and Panavia F groups were: 0.92 ± 0.42, 2.04 ± 0.78, 4.37 ± 1.18, and 16.42 ± 3.38 MPa, respectively. There was the statistically significant difference between the four luting cement tested (p < 0.05).
CONCLUSION: the phosphate-containing resin cement Panavia-F exhibited shear bond strength value significantly higher than all materials tested.
METHODS: Databases (MEDLINE, EMBASE, Cochrane Central Register of Controlled Trials and Cochrane Oral Health Group Trials Register databases) were searched up to and including July 2016. The primary outcome was probing depth (PD), and the secondary outcomes were changes in clinical attachment level (CAL) and bone defect (BD) fill. The mean differences (MD) of outcomes and 95% confidence intervals (CI) for each variable were calculated using random effect model.
RESULTS: Eight clinical studies were included. Seven studies used alendronate as an adjunct to SRP; of these, four studies used topical application and three used oral alendronate. Considering the effects of adjunctive bisphosphonates as compared to SRP alone, a high degree of heterogeneity for PD (Q value = 39.6, P
METHODS: The norm-referenced method of standard setting was applied to the real scores of 40 final-year dental students on a multiple-choice question (MCQ), a short answer question (SAQ), and an objective structured clinical examination (OSCE). A panel of 10 judges set the standard using the modified-Angoff method for the same paper in one sitting. One judge set the passing score of 10 OSCE questions after 2 weeks. A comparison of the grades and pass/fail rates derived from the absolute standard, norm-referenced, and modified-Angoff methods was made. The intra-rater and inter-rater reliabilities of the modified-Angoff method were assessed.
RESULTS: The passing rate for the absolute standard was 100% (40/40), for the norm-referenced method it was 62.5% (25/40), and for the modified-Angoff method it was 80% (32/40). The modified-Angoff method had good inter-rater reliability of 0.876 and excellent test-retest reliability of 0.941.
CONCLUSION: There were significant differences in the outcomes of these three standard-setting methods, as shown by the difference in the proportion of candidates who passed and failed the assessment. The modified-Angoff method was found to have good reliability for use with a professional qualifying dental examination.
METHODS: Antibacterial susceptibility assay, minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) were undertaken to evaluate the inhibitory activities of different zinc salts against the tested bacteria. A scanning electron microscope (SEM) was used to evaluate the morphological changes of bacterial cells following exposure to zinc salts. Kruskal-Wallis and Mann-Whitney tests were used to compare the inhibitory effect of the different zinc salts.
RESULTS: All zinc salts tested against S. mutans and S. sobrinus had a statistically and significantly smaller inhibition zone when compared to chlorhexidine, (P 0.05). Zinc chloride, zinc sulfate and zinc acetate demonstrated higher MIC and MBC values against S. mutans compared to S. sobrinus. However, zinc citrate revealed the highest MIC and MBC values of 1 mg/mL and > 8 mg/mL for S. sobrinus and > 8 mg/mL for S. mutans, respectively.
CONCLUSION: Different zinc salts have displayed inhibitory growth effects against the common oral bacteria at very low concentrations except for zinc citrate which showed no inhibitory effect against these bacteria in vitro.
METHODS: A questionnaire survey was conducted to assess self-reported dental injuries and knowledge of their management. An intraoral examination was performed using the decayed, missing, and filled teeth (DMFT) index following the World Health Organization guidelines.
RESULTS: A total of 61 para-athletes (men = 90.16%, n = 55; women = 9.84%, n = 6) from different sports categories with different disabilities randomly participated in this study. The incidence of self-reported dental injuries was 18.0% (n = 11), with the most common injury being crown tooth fracture (72.7%) and lip laceration (63.6%). However, the majority of the athletes (70.5%, n = 43) did nothing after experiencing dental trauma, and 82.0% (n = 50) were unaware of the immediate management of dental trauma. Based on the intraoral examination, only 9.8% (n = 6) of the athletes had perfectly sound teeth. The mean total DMFT index was 3.49 ± 2.371, while the mean DMFT index for decayed, missing, and filled teeth was 1.28 ± 1.293, 0.74 ± 0.705, and 1.48 ± 1.120, respectively. The mean DMFT index for decayed, missing, and filled teeth and total DMFT index significantly differed among the types of disabilities (P .05).
CONCLUSION: The most commonly reported injuries among para-athletes are crown tooth fractures and lip lacerations. The total DMFT index among para-athletes is moderate, emphasising the need for improvements.
PURPOSE: The purpose of this systematic review was to evaluate crestal bone loss (CBL) around zirconia dental implants and clinical periimplant inflammatory parameters.
MATERIAL AND METHODS: The focus question addressed was, "Do zirconia implants maintain crestal bone levels and periimplant soft tissue health?" Databases were searched for articles from 1977 through September 2014 with different combinations of the following MeSH terms: "dental implants," "zirconium," "alveolar bone loss," "periodontal attachment loss," "periodontal pocket," "periodontal index." Letters to the editor, case reports, commentaries, review articles, and articles published in languages other than English were excluded.
RESULTS: Thirteen clinical studies were included. In 8 of the studies, the CBL around zirconia implants was comparable between baseline and follow-up. In the other 5 studies, the CBL around zirconia implants was significantly higher at follow-up. Among the studies that used titanium implants as controls, 2 studies showed significantly higher CBL around zirconia implants, and in 1 study, the CBL around zirconia and titanium implants was comparable. The reported implant survival rates for zirconia implants ranged between 67.6% and 100%. Eleven studies selectively reported the periimplant inflammatory parameters.
CONCLUSIONS: Because of the variations in study design and methodology, it was difficult to reach a consensus regarding the efficacy of zirconia implants in maintaining crestal bone levels and periimplant soft tissue health.
MATERIALS AND METHODS: Forty Turkom-Cera ceramic disks (10 mm × 3 mm) were prepared and randomly divided into four groups. The disks were wet ground to 1000-grit and subjected to four surface treatments: (1) No treatment (Control), (2) sandblasting, (3) silane application, and (4) sandblasting + silane. The four groups of 10 specimens each were bonded with Panavia-F resin cement according to manufacturer's recommendations. The SBS was determined using the universal testing machine (Instron) at 0.5 mm/min crosshead speed. Failure modes were recorded and a qualitative micromorphologic examination of different surface treatments was performed. The data were analyzed using the one-way analysis of variance (ANOVA) and Tukey honestly significant difference (HSD) tests.
RESULTS: The SBS of the control, sandblasting, silane, and sandblasting + silane groups were: 10.8 ± 1.5, 16.4 ± 3.4, 16.2 ± 2.5, and 19.1 ± 2.4 MPa respectively. According to the Tukey HSD test, only the mean SBS of the control group was significantly different from the other three groups. There was no significant difference between sandblasting, silane, and sandblasting + silane groups.
CONCLUSION: In this study, the three surface treatments used improved the bond strength of resin cement to Turkom-Cera disks.
CLINICAL SIGNIFICANCE: The surface treatments used in this study appeared to be suitable methods for the cementation of glass infiltrated all-ceramic restorations.
Materials and methods: The antimicrobial effects of vitamin D3 were evaluated against Strep. sobrinus and Strep mutans using the agar disc diffusion method. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of vitamin D3 were determined using a microdilution method following the guidelines by the Clinical Laboratory Standards Institute (CLSI). Scanning electron microscope (SEM) was used to evaluate the morphological changes of bacterial cells following exposure to vitamin D3.
Results: Strep. sobrinus was more sensitive to vitamin D3 compared to Strep. mutans bacteria. The MIC values of vitamin D3 against Strep. sobrinus and Strep. mutans were 60 μg/ mL and 250 μg/mL respectively whereas the MBC values were 120 μg/mL and 500 μg/mL, respectively. Moreover, significant changes in the bacterial morphology were observed in treated bacterial cells with vitamin D3 as compared to the untreated control bacteria using SEM.
Conclusion: These findings suggested that vitamin D3 has excellent antimicrobial effects against Strep. sobrinus and Strep. mutans and may be considered as a promising compound in the prevention of dental caries in the future. Further research is recommended to elucidate the mechanism of vitamin D3 on these bacteria.