Displaying publications 21 - 40 of 50 in total

Abstract:
Sort:
  1. Sahathevan S, Karupaiah T, Khor BH, Sadu Singh BK, Mat Daud ZA, Fiaccadori E, et al.
    Front Nutr, 2021;8:743324.
    PMID: 34977109 DOI: 10.3389/fnut.2021.743324
    Background: Muscle wasting, observed in patients with end-stage kidney disease and protein energy wasting (PEW), is associated with increased mortality for those on hemodialysis (HD). Oral nutritional supplementation (ONS) and nutrition counseling (NC) are treatment options for PEW but research targeting muscle status, as an outcome metric, is limited. Aim: We compared the effects of combined treatment (ONS + NC) vs. NC alone on muscle status and nutritional parameters in HD patients with PEW. Methods: This multi-center randomized, open label-controlled trial, registered under ClinicalTrials.gov (Identifier no. NCT04789031), recruited 56 HD patients identified with PEW using the International Society of Renal Nutrition and Metabolism criteria. Patients were randomly allocated to intervention (ONS + NC, n = 29) and control (NC, n = 27) groups. The ONS + NC received commercial renal-specific ONS providing 475 kcal and 21.7 g of protein daily for 6 months. Both groups also received standard NC during the study period. Differences in quadriceps muscle status assessed using ultrasound (US) imaging, arm muscle area and circumference, bio-impedance spectroscopy (BIS), and handgrip strength (HGS) methods were analyzed using the generalized linear model for repeated measures. Results: Muscle indices as per US metrics indicated significance (p < 0.001) for group × time interaction only in the ONS + NC group, with increases by 8.3 and 7.7% for quadriceps muscle thickness and 4.5% for cross-sectional area (all p < 0.05). This effect was not observed for arm muscle area and circumference, BIS metrics and HGS in both the groups. ONS + NC compared to NC demonstrated increased dry weight (p = 0.039), mid-thigh girth (p = 0.004), serum prealbumin (p = 0.005), normalized protein catabolic rate (p = 0.025), and dietary intakes (p < 0.001), along with lower malnutrition-inflammation score (MIS) (p = 0.041). At the end of the study, lesser patients in the ONS + NC group were diagnosed with PEW (24.1%, p = 0.008) as they had achieved dietary adequacy with ONS provision. Conclusion: Combination of ONS with NC was effective in treating PEW and contributed to a gain in the muscle status as assessed by the US, suggesting that the treatment for PEW requires nutritional optimization via ONS.
  2. Wong XZ, Gan CC, Mohamed R, Yahya R, Ganapathy S, Tan SS, et al.
    BMC Nephrol, 2020 11 13;21(1):480.
    PMID: 33187498 DOI: 10.1186/s12882-020-02154-4
    BACKGROUND: Hepatitis C virus (HCV) infects more than 71 million people worldwide and chronic HCV infection increases the risk of liver cirrhosis and failure. Haemodialysis (HD) is one of the renal replacement therapies with risk of HCV transmission. Anti-HCV antibodies are the serological screening test for HCV infection that does not detect active phase of infection. Majority HCV infected HD patients in Malaysia do not have further HCV RNA performed due to high cost and thus HCV treatment is less frequently offered. HCV Core Antigen (HCV Ag) can potentially be used to diagnose active HCV infection in HD population in comparison to HCV RNA, at lower cost.

    METHODS: We conducted a cross-sectional study to assess the correlation between HCV Ag and HCV RNA and to identify the prevalence of active HCV infection among HCV seropositive HD patients from dialysis centres across West Malaysia from July 2019 to May 2020. Pre-dialysis blood was taken and tested for both HCV Ag and HCV RNA tests. HCV Ag was tested with Abbott ARCHITECT HCV Ag test.

    RESULTS: We recruited 112 seropositive HD patients from 17 centres with mean age of 54.04 ± 11.62 years, HD vintage of 14.1 ± 9.7 years, and male constitute 59.8% (67) of the study population. HCV Ag correlates well with HCV RNA (Spearman test coefficient 0.833, p  3000 IU/mL, HCV Ag had a higher sensitivity of 95.1% and greater correlation (Spearman test coefficient 0.897, p 

  3. Adanan NIH, Md Ali MS, Lim JH, Zakaria NF, Lim CTS, Yahya R, et al.
    J Ren Nutr, 2020 03;30(2):e15-e26.
    PMID: 31420234 DOI: 10.1053/j.jrn.2019.06.003
    OBJECTIVE: Studies investigating the health effects of prolonged intermittent fasting during Ramadan among Muslim patients on hemodialysis (HD) are limited and reported heterogeneous findings. This study aimed to evaluate the effects of intermittent fasting during Ramadan on nutritional and functional status of patients on maintenance HD.

    DESIGN AND METHODS: This was a 12-week, multicenter, prospective observational study. The study setting included three HD centers. Adult Muslim patients, who were undergoing HD session thrice weekly and planned to fast during Ramadan, were screened for eligibility and recruited. Nutritional and functional status assessments were carried out 2 weeks before (V0), at the fourth week of Ramadan (V1), and 4 weeks after Ramadan (V2). Nutritional status parameters included anthropometry (body mass index, interdialytic weight gain, waist circumference), body composition (mid-arm circumference, triceps skinfold, body fat percentage), blood biochemistry (albumin, renal profile, lipid profile, and inflammatory markers), blood pressure, dietary intake, and handgrip strength. Changes in nutritional and functional status parameters across study timepoints were analyzed using repeated-measures analysis of variance.

    RESULTS: A total of 87 patients completed the study, with 68 patients (78.2%) reporting fasting ≥20 days. Ramadan fasting led to significant reductions (all P  .05). Significant improvement was observed in serum phosphate levels, but serum albumin, urea, and creatinine were also reduced significantly during Ramadan (P 

  4. Selvanathan V, Yahya R, Ruslan MH, Sopian K, Amin N, Nour M, et al.
    Polymers (Basel), 2020 Feb 27;12(3).
    PMID: 32120814 DOI: 10.3390/polym12030516
    This work is a pioneer attempt to fabricate quasi-solid dye-sensitized solar cell (QSDDSC) based on organosoluble starch derivative. Rheological characterizations of the PhSt-HEC blend based gels exhibited viscoelastic properties favorable for electrolyte fabrication. From amplitude sweep and tack test analyses, it was evident that the inclusion of LiI improved the rigidity and tack property of the gels. On the other hand, the opposite was true for TPAI based gels, which resulted in less rigid and tacky electrolytes. The crystallinity of the gels was found to decline with increasing amount of salt in both systems. The highest photoconversion efficiency of 3.94% was recorded upon addition of 12.5 wt % TPAI and this value is one of the highest DSSC performance recorded for starch based electrolytes. From electrochemical impedance spectroscopy (EIS), it is deduced that the steric hindrance imposed by bulky cations aids in hindering recombination between photoanode and electrolyte.
  5. Rizwan M, Yahya R, Hassan A, Yar M, Abd Halim AA, Rageh Al-Maleki A, et al.
    J Mater Sci Mater Med, 2019 Jun 11;30(6):72.
    PMID: 31187295 DOI: 10.1007/s10856-019-6273-3
    The success of wound healing depends upon the proper growth of vascular system in time in the damaged tissues. Poor blood supply to wounded tissues or tissue engineered grafts leads to the failure of wound healing or rejection of grafts. In present paper, we report the synthesis of novel organosoluble and pro-angiogenic chitosan derivative (CSD) by the reaction of chitosan with 1,3-dimethylbarbituric acid and triethylorthoformate (TEOF). The synthesized material was characterized by FTIR and 13C-NMR to confirm the incorporated functional groups and new covalent connectivities. Biodegradability of the synthesized chitosan derivative was tested in the presence of lysozyme and was found to be comparable with CS. The cytotoxicity and apoptosis effect of new derivative was determined against gastric adenocarcinoma (AGS) cells and was found to be non-toxic. The CSD was found to be soluble in majority of organic solvents. It was blended with polycaprolactone (PCL) to form composite scaffolds. From an ex ovo CAM assay, it was noted that CSD stimulated the angiogenesis.
  6. Khor BH, Chinna K, Abdul Gafor AH, Morad Z, Ahmad G, Bavanandam S, et al.
    BMC Health Serv Res, 2018 Dec 04;18(1):939.
    PMID: 30514284 DOI: 10.1186/s12913-018-3702-9
    BACKGROUND: This study aimed to assess the situational capacity for nutrition care delivery in the outpatient hemodialysis (HD) setting in Malaysia by evaluating dietitian accessibility, nutrition practices and patients' outcomes.

    METHODS: A 17-item questionnaire was developed to assess nutrition practices and administered to dialysis managers of 150 HD centers, identified through the National Renal Registry. Nutritional outcomes of 4362 patients enabled crosscutting comparisons as per dietitian accessibility and center sector.

    RESULTS: Dedicated dietitian (18%) and visiting/shared dietitian (14.7%) service availability was limited, with greatest accessibility at government centers (82.4%) > non-governmental organization (NGO) centers (26.7%) > private centers (15.1%). Nutritional monitoring varied across HD centers as per albumin (100%) > normalized protein catabolic rate (32.7%) > body mass index (BMI, 30.7%) > dietary intake (6.0%). Both sector and dietitian accessibility was not associated with achieving albumin ≥40 g/L. However, NGO centers were 36% more likely (p = 0.030) to achieve pre-dialysis serum creatinine ≥884 μmol/L compared to government centers, whilst centers with dedicated dietitian service were 29% less likely (p = 0.017) to achieve pre-dialysis serum creatinine ≥884 μmol/L. In terms of BMI, private centers were 32% more likely (p = 0.022) to achieve BMI ≥ 25.0 kg/m2 compared to government centers. Private centers were 62% less likely (p 

  7. Taqui SN, Yahya R, Hassan A, Nayak N, Syed AA
    Int J Phytoremediation, 2017 Jul 03;19(7):686-694.
    PMID: 28121459 DOI: 10.1080/15226514.2017.1284746
    Fennel seed spent (FSS)-an inexpensive nutraceutical industrial spent has been used as an efficient biosorbent for the removal of Congo red (CR) from aqueous media. Results show that the conditions for maximum adsorption would be pH 2-4 and 30°C were ideal for maximum adsorption. Based on regression fitting of the data, it was determined that the Sips isotherm (R2 = 0.994, χ2 = 0.5) adequately described the mechanism of adsorption, suggesting that the adsorption occurs homogeneously with favorable interaction between layers with favorable interaction between layers. Thermodynamic analysis showed that the adsorption is favorable (negative values for ΔG°) and endothermic (ΔH° = 12-20 kJ mol-1) for initial dye concentrations of 25, 50, and 100 ppm. The low ΔH° value indicates that the adsorption is a physical process involving weak chemical interactions like hydrogen bonds and van der Waals interactions. The kinetics revealed that the adsorption process showed pseudo-second-order tendencies with the equal influence of intraparticle as well as film diffusion. The scanning electron microscopy images of FSS show a highly fibrous matrix with a hierarchical porous structure. The Fourier transform infrared spectroscopy analysis of the spent confirmed the presence of cellulosic and lignocellulosic matter, giving it both hydrophilic and hydrophobic properties. The investigations indicate that FSS is a cost-effective and efficient biosorbent for the remediation of toxic CR dye.
  8. Selvanathan V, Azzahari AD, Abd Halim AA, Yahya R
    Carbohydr Polym, 2017 Jul 01;167:210-218.
    PMID: 28433156 DOI: 10.1016/j.carbpol.2017.03.023
    A first-of-its-kind, eco-friendly quasi-solid bioelectrolyte derived from potato starch was prepared. Starch was chemically modified via phthaloylation to synthesize amorphous, hydrophobic starch derivative and the attachment of the phthaloyl group was confirmed via FTIR which showed phthalate ester peak at 1715cm-1; and 1H NMR peaks between 7.30-7.90ppm attributed to the aromatic protons of the phthaloyl group. The resulting starch derivative was then infused with ternary natural deep eutectic solvent (NADES) made from different molar ratios of choline chloride, urea and glycerol. Electrochemical Impedance Spectroscopy (EIS) revealed that the highest ionic conductivity was obtained by the system consisting of NADES with choline chloride:urea:glycerol in molar ratios of 4:6:2, with a magnitude of 2.86mScm-1, hence validating the prospects of the materials to be further experimented as an alternative electrolyte in various electrochemical devices.
  9. Rizwan M, Yahya R, Hassan A, Yar M, Azzahari AD, Selvanathan V, et al.
    Polymers (Basel), 2017 06 14;9(6).
    PMID: 30970902 DOI: 10.3390/polym9060225
    The authors wish to make a change to their published paper [1]. [...].
  10. Al-Mokaram AMAAA, Yahya R, Abdi MM, Mahmud HNME
    Nanomaterials (Basel), 2017 May 31;7(6).
    PMID: 28561760 DOI: 10.3390/nano7060129
    The performance of a modified electrode of nanocomposite films consisting of polypyrrole-chitosan-titanium dioxide (Ppy-CS-TiO₂) has been explored for the developing a non-enzymatic glucose biosensors. The synergy effect of TiO₂ nanoparticles (NPs) and conducting polymer on the current responses of the electrode resulted in greater sensitivity. The incorporation of TiO₂ NPs in the nanocomposite films was confirmed by X-ray photoelectron spectroscopy (XPS) spectra. FE-SEM and HR-TEM provided more evidence for the presence of TiO₂ in the Ppy-CS structure. Glucose biosensing properties were determined by amperommetry and cyclic voltammetry (CV). The interfacial properties of nanocomposite electrodes were studied by electrochemical impedance spectroscopy (EIS). The developed biosensors showed good sensitivity over a linear range of 1-14 mM with a detection limit of 614 μM for glucose. The modified electrode with Ppy-CS nanocomposite also exhibited good selectivity and long-term stability with no interference effect. The Ppy-CS-TiO₂ nanocomposites films presented high electron transfer kinetics. This work shows the role of nanomaterials in electrochemical biosensors and describes the process of their homogeneous distribution in composite films by a one-step electrochemical process, where all components are taken in a single solution in the electrochemical cell.
  11. Naji GA, Omar RA, Yahya R
    J Mech Behav Biomed Mater, 2017 03;67:135-143.
    PMID: 28006713 DOI: 10.1016/j.jmbbm.2016.12.007
    In all-ceramic systems, a high incidence of veneer chip-off has been reported in clinical studies. Coefficient of thermal expansion (CTE) behaviour is one of the factors that may increase residual stress in the interface and influence the veneer/core bond strength. Therefore, this study aimed to evaluate the effect of sodalite zeolite-infiltration on the CTE behaviour and bond strength of different all-ceramic prostheses. The case-study groups were synthesized sodalite zeolite-infiltrated alumina (IA-SOD) and synthesized sodalite zeolite-infiltrated zirconia-toughened alumina (ZTA) (IZ-SOD), while the control groups were glass-infiltrated alumina (IA-glass) and glass-infiltrated ZTA (IZ-glass). Forty cylindrical-shaped samples measuring 5 mm in diameter and 10 mm in height were tested for CTE using a thermo-mechanical analyser machine, and forty disc-shaped ceramic samples measuring 12 mm in diameter and 1.2 ± 0.2 mm in thickness were prepared using specially designed stainless steel split mould and veneered by cylinder-shaped (2 mm high × 2 mm diameter) low-fusing porcelain (Vita VM7). The veneer/core samples were sintered and tested for shear bond strength using a high precision universal testing machine. Scanning electron microscope, stereo microscope, atomic force microscope, and energy-dispersive X-ray spectroscopy were used to investigate the structural characteristics of samples at the fracture surface. The collected data were analyzed with a one-way ANOVA and Tukey HSD test (α=.05). IZ-SOD revealed highest CTE and shear bond strength values, while the IA-glass revealed the lowest values than the other groups. There was no significant difference in CTE and bond strength among IZ-SOD, IA-SOD and IZ-glass samples (p>0.05). The experimental SOD zeolite-infiltrated samples revealed higher CTE mismatch and bond strength along with a more favourable mode of failure than did the commercial glass-infiltrated samples. Sandblast technique is considered as effective conditioning procedure for enhancing the surface roughness of SOD zeolite-infiltrated frameworks which subsequently improving the bond strength.
  12. Ali ZA, Roslan MA, Yahya R, Wan Sulaiman WY, Puteh R
    IET Nanobiotechnol, 2017 Mar;11(2):152-156.
    PMID: 28476997 DOI: 10.1049/iet-nbt.2015.0123
    In this study, larvicidal activity of silver nanoparticles (AgNPs) synthesised using apple extract against fourth instar larvae of Aedes aegypti was determined. As a result, the AgNPs showed moderate larvicidal effects against Ae. aegypti larvae (LC50 = 15.76 ppm and LC90 = 27.7 ppm). In addition, comparison of larvicidal activity performance of AgNPs at high concentration prepared using two different methods showed that Ae. aegypti larvae was fully eliminated within the duration of 2.5 h. From X-ray diffraction, the AgNP crystallites were found to exhibit face centred cubic structure. The average size of these AgNPs as estimated by particle size distribution was in the range of 50-120 nm. The absorption maxima of the synthesised Ag showed characteristic Ag surface plasmon resonance peak. This green synthesis provides an economic, eco-friendly and clean synthesis route to Ag.
  13. Yusuf SNF, Azzahari AD, Selvanathan V, Yahya R, Careem MA, Arof AK
    Carbohydr Polym, 2017 Feb 10;157:938-944.
    PMID: 27988011 DOI: 10.1016/j.carbpol.2016.10.032
    A binary salt system utilizing lithium iodide (LiI) as the auxiliary component has been introduced to the N-phthaloylchitosan (PhCh) based gel polymer electrolyte consisting of ethylene carbonate (EC), dimethylformamide (DMF), tetrapropylammonium iodide (TPAI), and iodine (I2) in order to improve the performance of dye-sensitized solar cell (DSSC) with efficiency of 6.36%, photocurrent density, JSC of 17.29mAcm-2, open circuit voltage, VOC of 0.59V and fill factor, FF of 0.62. This efficiency value is an improvement from the 5.00% performance obtained by the DSSC consisting of only TPAI single salt system. The presence of the LiI in addition to the TPAI improves the charge injection rates and increases the iodide contribution to the total conductivity and both factors contribute to the increase in efficiency of the DSSC. The interaction behavior between polymer-plasticizer-salt was thoroughly investigated using EIS, FTIR spectroscopy and XRD.
  14. Hammed WA, Rahman MS, Mahmud HNME, Yahya R, Sulaiman K
    Des Monomers Polym, 2017;20(1):368-377.
    PMID: 29491808 DOI: 10.1080/15685551.2016.1271086
    A soluble poly (n-vinyl carbazole)-polypyrrole (PNVC-Ppy) copolymer was prepared through oxidative chemical polymerization wherein dodecyl benzene sulfonic acid (DBSA) was used as a dopant to facilitate polymer-organic solvent interaction and ammonium persulfate (APS) was used as an oxidant. Compared with undoped PNVC-Ppy, the DBSA-doped PNVC-Ppy copolymer showed higher solubility in some selected organic solvents. The composition and structural characteristics of the DBSA-doped PNVC-Ppy were determined by Fourier transform infrared, ultraviolet-visible, and X-ray diffraction spectroscopic methods. Field emission scanning electron microscopic method was employed to observe the morphology of the DBSA-doped PNVC-Ppy copolymer. The electrical conductivity of the DBSA-doped PNVC-Ppy copolymer was measured at room temperature. The conductivity increased with increasing concentration of APS oxidant, and the highest conductivity was recorded at 0.004 mol/dm3APS at a polymerization temperature of -5 °C. The increased conductivity can be explained by the extended half-life of pyrrole free radical at a lower temperature and a gradual increase in chain length over a prolonged time due to the slow addition of APS. Furthermore, the obtained soluble copolymer exhibits unique optical and thermal properties different from those of PNVC and Ppy.
  15. Naeem R, Ali Ehsan M, Yahya R, Sohail M, Khaledi H, Mazhar M
    Dalton Trans, 2016 Oct 14;45(38):14928-39.
    PMID: 27549401 DOI: 10.1039/c6dt02656g
    Pristine Mn2O3 and Ag-Mn2O3 composite thin films have been developed on fluorine doped tin oxide (FTO) coated glass substrates at 450 °C by aerosol assisted chemical vapor deposition (AACVD) using a methanol solution of a 1 : 2 mixture of acetatoargentate(i), Ag(CH3COO), and a newly synthesized manganese complex, [Mn(dmae)2(TFA)4] (1) (dmae = N,N-dimethylaminoethanolate, TFA = trifluoroacetate). The phase purity and stoichiometric composition of the films were investigated by X-ray diffraction (XRD) and Raman spectroscopy techniques. Energy dispersive X-ray (EDX) and X-ray photoelectron spectroscopy (XPS) analyses revealed a Ag to Mn ratio of 1 : 2 and further confirmed the uniform dispersion of Ag nanoparticles into the Mn2O3 structure. Optical studies showed a direct band gap of 2.0 eV for the pristine Mn2O3 film that was lowered to 1.8 eV for Ag-Mn2O3 due to the plasmonic interaction of Ag with Mn2O3. The Ag-Mn2O3 composite film displayed enhanced photocatalytic activity in photoelectrochemical (PEC) water splitting and yielded a photocurrent of 3 mA cm(-2) at 0.7 V versus Ag/AgCl which was 1.6 times higher than a pristine Mn2O3 film alone, under AM 1.5 G illumination (100 mW cm(-2)). The high PEC efficiency is mainly due to the plasmonic effect of Ag nanoparticles, which enhances the visible light absorption, efficient electron-hole separation and high carrier mobility of the Ag-Mn2O3 photoelectrode. The charge carrier density of Ag-Mn2O3 is two times higher than the pristine Mn2O3 as calculated by the Mott-Schottky plot. Based on the PEC studies a mechanism is proposed to elucidate the high activity of Ag-Mn2O3 in PEC water splitting.
  16. Shahabudin N, Yahya R, Gan SN
    Polymers (Basel), 2016 Apr 06;8(4).
    PMID: 30979216 DOI: 10.3390/polym8040125
    One of the approaches to prolong the service lifespan of polymeric material is the development of self-healing ability by means of embedded microcapsules containing a healing agent. In this work, poly(melamine-urea-formaldehyde) (PMUF) microcapsules containing a palm oil-based alkyd were produced by polymerization of melamine resin, urea and formaldehyde that encapsulated droplets of the suspended alkyd particles. A series of spherical and free-flowing microcapsules were obtained. The chemical properties of core and shell materials were characterized by Attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and proton nuclear magnetic resonance spectroscopy (¹H-NMR). Differential scanning calorimetry (DSC) analysis showed a glass transition around -15 °C due to the alkyd, and a melting temperature at around 200 °C due to the shell. Thermogravimetric analysis (TGA) results showed that the core and shell thermally degraded within the temperature range of 200⁻600 °C. Field emission scanning electron microscope (FESEM) examination of the ruptured microcapsule showed smooth inner and rough outer surfaces of the shell. Flexural strength and microhardness (Vickers) of the cured epoxy compound were not affected with the incorporation of 1%⁻3% of the microcapsules. The viability of the healing reactions was demonstrated by blending small amounts of alkyd with epoxy and hardener at different ratios. The blends could readily cure to non-sticky hard solids at room temperature and the reactions could be verified by ATR-FTIR.
  17. Vikneswaran R, Syafiq MS, Eltayeb NE, Kamaruddin MN, Ramesh S, Yahya R
    PMID: 26046495 DOI: 10.1016/j.saa.2015.05.087
    Copper ion recognition and DNA interaction of a newly synthesized fluorescent Schiff base (HPyETSC) were investigated using UV-vis and fluorescent spectroscopy. Examination using these two techniques revealed that the detection of copper by HPyETSC is highly sensitive and selective, with a detection limit of 0.39 μm and the mode of interaction between HPyETSC and DNA is electrostatic, with a binding constant of 8.97×10(4) M(-1). Furthermore, gel electrophoresis studies showed that HPyETSC exhibited nuclease activity through oxidative pathway.
  18. Mahmoodian R, Yahya R, Dabbagh A, Hamdi M, Hassan MA
    PLoS One, 2015;10(12):e0144632.
    PMID: 26641651 DOI: 10.1371/journal.pone.0144632
    A novel method is proposed to study the behavior and phase formation of a Si+C compacted pellet under centrifugal acceleration in a hybrid reaction. Si+C as elemental mixture in the form of a pellet is embedded in a centrifugal tube. The pellet assembly and tube are exposed to the sudden thermal energy of a thermite reaction resulted in a hybrid reaction. The hybrid reaction of thermite and Si+C produced unique phases. X-ray diffraction pattern (XRD) as well as microstructural and elemental analyses are then investigated. XRD pattern showed formation of materials with possible electronic and magnetic properties. The cooling rate and the molten particle viscosity mathematical model of the process are meant to assist in understanding the physical and chemical phenomena took place during and after reaction. The results analysis revealed that up to 85% of materials converted into secondary products as ceramics-matrix composite.
  19. Yahya R, Karjiban RA, Basri M, Rahman MB, Girardi M
    J Mol Model, 2014 Nov;20(11):2512.
    PMID: 25381172 DOI: 10.1007/s00894-014-2512-1
    Nonionic surfactants such as the Brij® series are important in the preparation of transdermal drug nanodelivery products using nanoemulsions because of their low toxicity and low irritancy. Here, Monte Carlo (MC) simulation was used to examine the physical behavior of the model deterministic system by using sampling procedures. Metropolis MC simulations were run on three mixtures of two different nonionic surfactants, Brij92 and Brij96, with different compositions in aqueous solution. The system was simulated in the canonical ensemble with constant temperature, volume and number of molecules. Hence, the acceptance ratio for single atom moves of the mixed surfactants increased as the concentration of surfactants increased from 0.494 to 0.591. The lowest total energy for the mixed surfactant systems was -99,039 kcal mol(-1) due to the interaction between all molecules in the system simulated. The physicochemical properties of models such as the radius of gyration and radial distribution function, were also determined. These observations indicate that the behavior and physicochemical of mixed surfactant and PKOEs nanoemulsion systems were described adequately during the simulation.
  20. Mansoor MA, Ismail A, Yahya R, Arifin Z, Tiekink ER, Weng NS, et al.
    Inorg Chem, 2013 May 20;52(10):5624-6.
    PMID: 23627942 DOI: 10.1021/ic302772b
    Perovskite-structured lead titanate thin films have been grown on FTO-coated glass substrates from a single-source heterometallic molecular complex, [PbTi(μ2-O2CCF3)4(THF)3(μ3-O)]2 (1), which was isolated in quantitative yield from the reaction of tetraacetatolead(IV), tetrabutoxytitanium(IV), and trifluoroacetic acid from a tetrahydrofuran solution. Complex 1 has been characterized by physicochemical methods such as melting point, microanalysis, FTIR, (1)H and (19)F NMR, thermal analysis, and single-crystal X-ray diffraction (XRD) analysis. Thin films of lead titanate having spherical particles of various sizes have been grown from 1 by aerosol-assisted chemical vapor deposition at 550 °C. The thin films have been characterized by powder XRD, scanning electron microscopy, and energy-dispersive X-ray analysis. An optical band gap of 3.69 eV has been estimated by UV-visible spectrophotometry.
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links