Displaying publications 21 - 40 of 176 in total

Abstract:
Sort:
  1. Zainudin NM, Aziz BA, Haifa AL, Deng CT, Omar AH
    Respirology, 2001 Jun;6(2):151-5.
    PMID: 11422895
    OBJECTIVE: Exercise-induced bronchoconstriction (EIB) may be demonstrated in 60-70% of asthmatic children in temperate climates. In areas of high humidity it is postulated to be low. The aim of the study was to determine the prevalence of EIB in a population of schoolchildren with wheezing, living in the humid tropical climate of Kuala Lumpur, Malaysia.

    METHOD: We performed a cross-sectional study using the International Study of Asthma and Allergies in Childhood questionnaire to identify 7-12-year-old Malay children with asthma symptoms from a primary school in central Kuala Lumpur. Sixty-five of 76 children with 'ever wheeze' performed an exercise challenge test successfully in an uncontrolled environment. A random sample of 80 schoolchildren with no history of wheeze were similarly tested as controls. The relative humidity and temperature were recorded. A fall of > 15% was considered as clinically important.

    RESULTS: The prevalence of EIB in schoolchildren with 'ever wheeze' was 47.7%. The prevalence of EIB in children with 'current wheeze' was 51.6%. The prevalence of EIB in controls was 7.5%. The relative humidity during the study ranged from 41 to 90%. There was no significant relationship between different humidity levels and EIB (P = 0.58, regression analysis).

    CONCLUSION: This study demonstrates that EIB is present in asthmatic children despite the highly humid tropical environment.

    Matched MeSH terms: Humidity
  2. Afsah-Hejri L, Jinap S, Hajeb P, Radu S, Shakibazadeh S
    Compr Rev Food Sci Food Saf, 2013 Nov;12(6):629-651.
    PMID: 33412719 DOI: 10.1111/1541-4337.12029
     Fungi are distributed worldwide and can be found in various foods and feedstuffs from almost every part of the world. Mycotoxins are secondary metabolites produced by some fungal species and may impose food safety risks to human health. Among all mycotoxins, aflatoxins (AFs), ochratoxin A (OTA), trichothecenes, deoxynivalenol (DON and T-2 toxin), zearalenone (ZEN), and fumonisins (FMN) have received much attention due to high frequency and severe health effects in humans and animals. Malaysia has heavy rainfall throughout the year, high temperatures (28 to 31 °C), and high relative humidity (70% to 80% during wet seasons). Stored crops under such conditions can easily be contaminated by mycotoxin-producing fungi. The most important mycotoxins in Malaysian foods are AFs, OTA, DON, ZEN, and FMN that can be found in peanuts, cereal grains, cocoa beans, and spices. AFs have been reported to occur in several cereal grains, feeds, nuts, and nut products consumed in Malaysia. Spices, oilseeds, milk, eggs, and herbal medicines have been reported to be contaminated with AFs (lower than the Malaysian acceptable level of 35 ng/g for total AFs). OTA, a possible human carcinogen, was reported in cereal grains, nuts, and spices in Malaysian market. ZEN was detected in Malaysian rice, oat, barley, maize meal, and wheat at different levels. DON contamination, although at low levels, was reported in rice, maize, barley, oat, wheat, and wheat-based products in Malaysia. FMN was reported in feed and some cereal grains consumed in Malaysia. Since some food commodities are more susceptible than others to fungal growth and mycotoxin contamination, more stringent prevention and control methods are required.
    Matched MeSH terms: Humidity
  3. Willmott AGB, Hayes M, James CA, Gibson OR, Maxwell NS
    Temperature (Austin), 2019 Sep 19;7(2):178-190.
    PMID: 33015245 DOI: 10.1080/23328940.2019.1664370
    Athletes exercising in heat stress experience increased perceived fatigue acutely, however it is unknown whether heat acclimation (HA) reduces the magnitude of this perceptual response and whether different HA protocols influence the response. This study investigated sensations of fatigue following; acute exercise-heat stress; short- (5-sessions) and medium-term (10-sessions) HA; and between once- (ODHA) and twice-daily HA (TDHA) protocols. Twenty male participants (peak oxygen uptake: 3.75 ± 0.47 L·min-1) completed 10 sessions (60-min cycling at ~2 W·kg-1, 45°C/20% relative humidity) of ODHA (n = 10) or non-consecutive TDHA (n = 10). Sensations of fatigue (General, Physical, Emotional, Mental, Vigor and Total Fatigue) were assessed using the multi-dimensional fatigue scale inventory-short form pre and post session 1, 5 and 10. Heat adaptation was induced following ODHA and TDHA, with reductions in resting rectal temperature and heart rate, and increased plasma volume and sweat rate (P 
    Matched MeSH terms: Humidity
  4. Shafie MH, Yusof R, Samsudin D, Gan CY
    Int J Biol Macromol, 2020 Nov 15;163:1276-1282.
    PMID: 32673725 DOI: 10.1016/j.ijbiomac.2020.07.109
    The potential of Averrhoa bilimbi pectin (ABP) as a source of biopolymer for edible film (EF) production was explored, and deep eutectic solvent (DES) (1% w/w) containing choline chloride-citric acid monohydrate at a molar ratio of 1:1 was used as the plasticizer. The EF-ABP3:1, which was produced from ABP with large branch size, showed a higher value of melting temperature (175.30 °C), tensile stress (7.32 MPa) and modulus (33.64 MPa). The EF-ABP3:1 also showed better barrier properties by obtaining the lowest water vapor transmission rates (1.10-1.18 mg/m2.s) and moisture absorption values (2.61-32.13%) depending on the relative humidity compared to other EF-ABPs (1.39-1.83 mg/m2.s and 3.48-51.50%, respectively) that have linear structure with smaller branch size. From these results, it was suggested that the galacturonic acid content, molecular weight, degree of esterification and pectin structure of ABP significantly influenced the properties of EFs. The interaction of highly branched pectin chains was stronger than the linear chains, thus reduced the effect of plasticizer and produced a mechanically stronger EF with better barrier properties. Hence, it was suggested that these EFs could be used as alternative degradable packaging/coating materials.
    Matched MeSH terms: Humidity
  5. Mazalan NS, Landers GJ, Wallman KE, Ecker U
    J Sports Sci Med, 2021 03;20(1):69-76.
    PMID: 33707989 DOI: 10.52082/jssm.2021.69
    This study investigated the effectiveness of head cooling on cognitive performance after 30 min and 60 min of running in the heat. Ten moderately-trained, non-heat-acclimated, male endurance athletes (mean age: 22 ± 6.6 y; height: 1.78 ± 0.10 m; body-mass: 75.7 ± 15.6 kg; VO2peak: 51.6 ± 4.31 mL-1>kg-1>min) volunteered for this study. Participants performed two experimental trials: head cooling versus no-cooling (within-subjects factor with trial order randomized). For each trial, participants wore a head-cooling cap for 15 min with the cap either cooled to 0°C (HC) or not cooled (22°C; CON). Participants then completed 2 × 30 min running efforts on a treadmill at 70% VO2peak in hot conditions (35°C, 70% relative humidity), with a 10 min rest between efforts. Working memory was assessed using an operation span (OSPAN) task immediately prior to the 15 min cooling/no-cooling period (22°C, 35% RH) and again after 30 min and 60 min of running in the heat. Numerous physiological variables, including gastrointestinal core temperature (Tc) were assessed over the protocol. Scores for OSPAN were similar between trials, with no interaction effect or main effects for time and trial found (p = 0.58, p = 0.67, p = 0.54, respectively). Forehead temperature following precooling was lower in HC (32.4 ± 1.6°C) compared with CON (34.5 ± 1.1°C) (p = 0.01), however, no differences were seen in Tc, skin temperature, heart rate and ratings of perceived exertion between HC and CON trials at any time point assessed (p > 0.05). In conclusion, despite HC reducing forehead temperature prior to exercise, it did not significantly improve cognitive performance during (half-time break) or after subsequent exercise in hot environmental conditions, compared to a no cooling control.
    Matched MeSH terms: Humidity
  6. Zamram QAZM, Mohsin HF, Mohamad MM, Nor Hazalin NAM, Hamid KA
    Curr Drug Deliv, 2021 Apr 18.
    PMID: 33874872 DOI: 10.2174/1567201818666210419114809
    AIM: Formulating topical products for skin delivery has always been a challenge for pharmaceutical scientists to fulfil good formulation criteria. Despite the challenges, gel-based drug delivery offers some advantages such that it is non-invasive, painless, avoidance of the first-pass metabolism and has satisfactory patient compliance.

    OBJECTIVES: In this study, Chromolaena odorata gel and quercetin gel (bioactive flavonoid compound) were successfully formulated and compared with placebo and conventional wound aid gel. The chromatographic profilling was conducted to screen the presence of phytoconstituents. Subsequently, all formulated gels were subjected to physical characteristic and stability study.

    METHODS: Reverse Phase High-Performance Liquid Chromatography (RP-HPLC) of C.odorata methanolic leaves extract shows a distinct compound separation at retention time 8.4min to 34.8 min at 254nm. All gels were characterised by evaluating their rheological properties including storage modulus, loss modulus and plastic viscosity. Besides, texture analysis was performed to measure the gels' firmness, consistency, cohesiveness, and viscosity index.

    RESULTS: From the observation, C. odorata gel demonstrated better spreadability as compared to the other gels, which acquired less work and favourable to be applied onto the skin. Moreover, C. odorata gel showed no changes in organoleptic properties and proven to be stable after 30 days of accelerated stability study at 40°C ± 2°C with relative humidity (RH) of 75%± 5%.

    CONCLUSION: C. odorata gel has shown to be stable, reflecting the combination of materials used in the formulation, which did not degrade throughout the study. This work suggests the potential of this gel as a vehicle to deliver the active ingredients of C. odorata to the skin, which can be further explored as a topical application in antimicrobial wound management or other skin diseases study.

    Matched MeSH terms: Humidity
  7. Gibson OR, James CA, Mee JA, Willmott AGB, Turner G, Hayes M, et al.
    Temperature (Austin), 2020;7(1):3-36.
    PMID: 32166103 DOI: 10.1080/23328940.2019.1666624
    International competition inevitably presents logistical challenges for athletes. Events such as the Tokyo 2020 Olympic Games require further consideration given historical climate data suggest athletes will experience significant heat stress. Given the expected climate, athletes face major challenges to health and performance. With this in mind, heat alleviation strategies should be a fundamental consideration. This review provides a focused perspective of the relevant literature describing how practitioners can structure male and female athlete preparations for performance in hot, humid conditions. Whilst scientific literature commonly describes experimental work, with a primary focus on maximizing magnitudes of adaptive responses, this may sacrifice ecological validity, particularly for athletes whom must balance logistical considerations aligned with integrating environmental preparation around training, tapering and travel plans. Additionally, opportunities for sophisticated interventions may not be possible in the constrained environment of the athlete village or event arenas. This review therefore takes knowledge gained from robust experimental work, interprets it and provides direction on how practitioners/coaches can optimize their athletes' heat alleviation strategies. This review identifies two distinct heat alleviation themes that should be considered to form an individualized strategy for the athlete to enhance thermoregulatory/performance physiology. First, chronic heat alleviation techniques are outlined, these describe interventions such as heat acclimation, which are implemented pre, during and post-training to prepare for the increased heat stress. Second, acute heat alleviation techniques that are implemented immediately prior to, and sometimes during the event are discussed. Abbreviations: CWI: Cold water immersion; HA: Heat acclimation; HR: Heart rate; HSP: Heat shock protein; HWI: Hot water immersion; LTHA: Long-term heat acclimation; MTHA: Medium-term heat acclimation; ODHA: Once-daily heat acclimation; RH: Relative humidity; RPE: Rating of perceived exertion; STHA: Short-term heat acclimation; TCORE: Core temperature; TDHA: Twice-daily heat acclimation; TS: Thermal sensation; TSKIN: Skin temperature; V̇O2max: Maximal oxygen uptake; WGBT: Wet bulb globe temperature.
    Matched MeSH terms: Humidity
  8. Ito T, Okada K, Leong KH, Hirai D, Hayashi Y, Kumada S, et al.
    Chem Pharm Bull (Tokyo), 2019;67(3):271-276.
    PMID: 30828004 DOI: 10.1248/cpb.c18-00888
    The different states of water incorporated in wet granules were studied by a low-field benchtop 1H-NMR time-domain NMR (TD-NMR) instrument. Wet granules consisting different fillers [cornstarch (CS), microcrystalline cellulose (MCC), and D-mannitol (MAN)] with different water contents were prepared using a high-speed granulator, and then their spin-spin relaxation time (T2) was measured using the NMR relaxation technique. The experimental T2 relaxation curves were analyzed by the two-component curve fitting, and then the individual T2 relaxation behaviors of solid and water in wet granules were identified. According to the observed T2 values, it was confirmed that the molecular mobility of water in CS and MCC granules was more restricted than that in the MAN granule. The state of water appeared to be associated with the drying efficiency and moisture absorption capacity of wet granules. Thus, it was confirmed that the state of water significantly affected the wet granulation process and the characteristics of the resultant granules. In the final phase of this study, the effects of binders on the molecular mobility of water in granulation fluids and wet granules were examined. The state of water in granulation fluids was substantially changed by changing the binders. The difference was still detected in wet granules prepared by addition of these fluids to the fillers. In conclusion, TD-NMR can offer valuable knowledge on wet granulation from the viewpoint of molecular mobility of water.
    Matched MeSH terms: Humidity
  9. Nwunuji TP, Mayowa OO, Yusoff SM, Bejo SK, Salisi S, Mohd EA
    Anim Sci J, 2014 May;85(5):611-6.
    PMID: 24612236 DOI: 10.1111/asj.12174
    The ameliorative effect of ascorbic acid (AA) on live weight following transportation is vital in animal husbandry. This study investigated the influence of AA on live weight, rectal temperature (rt), and oxidative status of transport stressed goats in a hot humid tropical environment. Twenty-four goats were divided into four groups, A, B, C and D of six animals each. Group A were administered AA 100 mg/kg intramuscularly 30 min prior to 3.5 h transportation. Group B was administered AA following transportation. Group C were transported but not administered AA as positive controls while group D were not transported but were administered normal saline as negative controls. Live weight, rt and blood samples were collected before, immediately post-transport (pt), 24 h, 3 days, 7 days and 10 days pt. Plasma was used for malondialdehyde (MDA) analysis while hemolysates were used for superoxide dismutase (SOD) analysis. There was minimal live weight loss in group A compared to groups B and C. Group A recorded reduced MDA activities and increased SOD activities compared to groups B and C which recorded significantly high MDA activities. This study revealed that AA administration ameliorated the stress responses induced by transportation in animals in hot humid tropical environments. The administration of AA to goats prior to transportation could ameliorate stress and enhance productivity.
    Matched MeSH terms: Humidity
  10. Chai LK, Mohd-Tahir N, Bruun Hansen HC
    Pest Manag Sci, 2009 Feb;65(2):189-96.
    PMID: 18979521 DOI: 10.1002/ps.1667
    High amounts of insecticides are often used in intensive tropical vegetable production systems. Their persistence and residues in vegetables and soils need to be studied to ensure food safety and environmental stability. The dissipation of acephate, chlorpyrifos, cypermethrin and their metabolites was studied in green mustard [Brassica juncea (L.) Coss.] and soils. Two treatments, Impact 75 (acephate) and Agent 505 (cypermethrin plus chlorpyrifos), were applied 4 times at weekly intervals.
    Matched MeSH terms: Humidity
  11. Norhayati, H., Rasma Suzielawanis, Mohd Khan AMohd Khan, A.
    Malays J Nutr, 2013;19(1):111-119.
    MyJurnal
    Introduction: A prebiotic such as inulin is a well-known functional plant food ingredient. It is capable of stimulating growth of beneficial bifidobacteria in the intestine thus protecting against intestinal infections, preventing constipation, increasing mineral absorption, reducing the incidence of colon cancer, and producing B vitamins. Inulin added to food therefore has to be stable during food processing especially against heat treatment, low pH and Maillard reaction. Methods: Newly developed dark chocolate, DC-1, containing inulin (replacing sugar component) as an added value, was stored at 18oC, 60% relative humidity and 25oC, 80% relative humidity (RH) to determine shelf life stability compared to control dark chocolate, DC-0 (with high content of sugar). Sensory evaluation (quantitative descriptive analysis), water activity (aw), microbiological content and presence of inulin after storage of the prebiotic chocolate under both conditions were evaluated to determine shelf life. Results: The DC-1 chocolate had at least 12 months of shelf life at 18oC, 60% RH with better acceptance than DC-0; moreover, it did not experience microbiological and inulin content changes. At 25oC, 80% RH, the growth of Aspergillus sp. was observed on the surface of both DC-0 and DC-1 with aw >0.50 after a 2-month storage. Conclusion: Shelf life stability of DC-1 is almost similar to DC-0.
    Matched MeSH terms: Humidity
  12. Wan Norafikah O, Chen CD, Soh HN, Lee HL, Nazni WA, Sofian-Azirun M
    Trop Biomed, 2009 Aug;26(2):206-15.
    PMID: 19901907 MyJurnal
    Ovitrap surveillance was initiated for eight continuous weeks to determine the distribution and abundance of Aedes sp. mosquitoes in the University of Malaya campus, Kuala Lumpur, and the impact of meteorological conditions on the Aedes populations. Two study areas within the campus were selected: Varsity Lake and Seventh Residential College. The abundance of Aedes populations in Varsity Lake was indicated by ovitrap index (OI) which ranged from 60.00%-90.00%. The mean number of larvae per ovitrap of Aedes albopictus in Varsity Lake ranged from 11.23+/-2.42-43.80+/-6.22. On the other hand, the outdoor OI for Seventh Residential College ranged from 73.33%-93.33%, respectively, while the mean number larvae per ovitrap for this area ranged from 19.33+/-4.55-35.27+/-5.46, respectively. In addition, the indoor OI of Seventh Residential College ranged from 0.00%-30.00%, while the mean number of larvae per ovitrap for Ae. albopictus ranged from 0-5.90+/-3.55. There was no significant difference (p>0.05) of Ae. albopictus population between Varsity Lake and Seventh Residential College. The studies showed a correlation between OI and mean number of larvae per ovitrap for outdoor Ae. albopictus populations in Varsity Lake and Seventh Residential College (r=0.794). There was also a correlation between the mean larvae number per ovitrap of Ae. albopictus obtained from eight weeks indoor ovitrap surveillance in Seventh Residential College with rainfall (r=0.584). However, there was no correlation between the mean larvae number per ovitrap of Ae. albopictus in both study areas with temperature and relative humidity. Aedes aegypti mosquitoes were found neither indoor nor outdoor in both study areas. This study indicated that the principal dengue vector in the university campus was most likely Ae. albopictus.
    Matched MeSH terms: Humidity
  13. Wong TW, Deepak KG, Taib MN, Anuar NK
    Int J Pharm, 2007 Oct 1;343(1-2):122-30.
    PMID: 17597317
    The capacity of microwave non-destructive testing (NDT) technique to characterize the matrix property of binary polymeric films for use as transdermal drug delivery system was investigated. Hydroxypropylmethylcellulose (HPMC) and polyethylene glycol (PEG) 3000 were the choice of polymeric matrix and plasticizer, respectively with loratadine as the model drug. Both blank and drug loaded HPMC-PEG 3000 films were prepared using the solvent-evaporation method. These films were conditioned at the relative humidity of 25, 50 and 75% prior to physicochemical characterization using the established methods of ultra-violet spectrophotometry, differential scanning calorimetry and Fourier transform infrared spectroscopy methods, as well as, novel microwave NDT technique. Blank films exhibited a greater propensity of polymer-polymer interaction at the O-H domain upon storage at a lower level of relative humidity, whereas drug loaded films exhibited a greater propensity of polymer-polymer, polymer-plasticizer and/or drug-polymer interaction via the O-H, C-H and/or aromatic C=C functional groups when they were stored at a lower or moderate level of relative humidity. The absorption and transmission characteristics of both blank and drug loaded films for microwave varied with the state of polymer-polymer, polymer-plasticizer, and/or drug-polymer interaction of the matrix. The measurements of microwave NDT test at 8 and 12 GHz were sensitive to the polar fraction of film involving functional group such as O-H moiety and the less polar environment of matrix consisting of functional groups such as C-H and aromatic C=C moieties. The state of interaction between polymer, plasticizer and/or drug of a binary polymeric film can be elucidated through its absorption and transmission profiles of microwave.
    Matched MeSH terms: Humidity
  14. Afsah-Hejri, L.
    MyJurnal
    Aflatoxins are carcinogenic, mutagenic and teratogenic fungal toxins predominantly produced by Aspergillus flavus (A. flavus) and Aspergillus parasiticus (A. parasiticus). Members of the Aspergillus family are wound-invading pathogens that can infect pistachio trees and nuts. The pistachio nut is a favorite tree nut worldwide, and more than half of the world’s pistachio production is from Iran. Pistachio nuts can easily be infected with Aspergillus spp. due to early splitting or due to animal, insect or physical damage. Any established infection of Aspergillus under high relative humidity and temperature results in the production and rapid accumulation of aflatoxins in pistachio nuts. It is impractical to remove aflatoxins from pistachio nuts after they are produced. Some microorganisms (such as saprophytic yeasts) have been reported to have an antagonistic effect against Aspergillus spp. This study aimed to isolate saprophytic yeasts from pistachio fruits and leaves and investigate their biocontrol activities against a toxigenic strain of Aspergillus flavus (A. flavus). Saprophytic yeasts were identified based on their morphological properties and biochemical tests. In total, 24 yeast isolates were obtained from pistachio fruits and leaves, and their antagonistic effect on A. flavus (PTCC 5006) was investigated. Five saprophytic yeast isolates, displaying the highest biocontrol activities against A. flavus (PTCC 5006), were identified as Pseudozyma fusiformata, Cryptococcus albidus, Rhodotorula fragaria, Cryptococcus hungaricus and Rhodotorula hinula. The biocontrol activities of these yeast isolates were evaluated by their inhibitory effects on sporulation, colony expansion, biomass production and prevention of aflatoxin B1 (AFB1) production. Pseudozyma fusiformata was the most effective yeast isolate in terms of spore reduction (84.6%) and inhibition of AFB1 production (89.1%). Cryptococcus albidus produced the maximum reduction in fungal dry weight (77.9%). Based on these results, isolated saprophytic yeasts from pistachio fruits and leaves can be used as effective biocontrol agents against the growth of Aspergillus and aflatoxin production.
    Matched MeSH terms: Humidity
  15. Shobugawa Y, Takeuchi T, Hibino A, Hassan MR, Yagami R, Kondo H, et al.
    Epidemiol Infect, 2017 Jan;145(2):272-284.
    PMID: 27682641
    In temperate zones, human respiratory syncytial virus (HRSV) outbreaks typically occur in cold weather, i.e. in late autumn and winter. However, recent outbreaks in Japan have tended to start during summer and autumn. This study examined associations of meteorological conditions with the numbers of HRSV cases reported in summer in Japan. Using data from the HRSV national surveillance system and national meteorological data for summer during the period 2007-2014, we utilized negative binomial logistic regression analysis to identify associations between meteorological conditions and reported cases of HRSV. HRSV cases increased when summer temperatures rose and when relative humidity increased. Consideration of the interaction term temperature × relative humidity enabled us to show synergistic effects of high temperature with HRSV occurrence. In particular, HRSV cases synergistically increased when relative humidity increased while the temperature was ⩾28·2 °C. Seasonal-trend decomposition analysis using the HRSV national surveillance data divided by 11 climate divisions showed that summer HRSV cases occurred in South Japan (Okinawa Island), Kyushu, and Nankai climate divisions, which are located in southwest Japan. Higher temperature and higher relative humidity were necessary conditions for HRSV occurrence in summer in Japan. Paediatricians in temperate zones should be mindful of possible HRSV cases in summer, when suitable conditions are present.
    Matched MeSH terms: Humidity
  16. Lee HS, Singh JK, Ismail MA
    Sci Rep, 2017 02 03;7:41935.
    PMID: 28157233 DOI: 10.1038/srep41935
    A new technique was accepted to fill the porosity of Al coating applied by arc thermal spray process to enhance corrosion resistance performance in artificial ocean water. The porosity is the inherent property of arc thermal spray coating process. In this study, applied coating was treated with different concentrations of ammonium phosphate mono basic (NH4H2PO4: AP) solution thereafter dried at room temperature and kept in humidity chamber for 7d to deposit uniform film. The corrosion resistance of Al coating and treated samples have been evaluated using electrochemical impedance spectroscopy (EIS) and potentiodynamic techniques with exposure periods in artificial ocean water. Electrochemical techniques, X-ray diffraction (XRD), Raman spectroscopy, atomic force microscopy (AFM) and field emission-scanning electron microscopy (FE-SEM) indicated that phosphate ion would have been retarding corrosion of Al coating effectively. The formation of AHP (Ammonium Aluminum Hydrogen Phosphate Hydrate: NH4)3Al5H6(PO4)8.18H2O) on Al coating surface after treatment with AP is nano sized, crystalline and uniformly deposited but after exposure them in artificial ocean water, they form AHPH (Aluminum hydroxide phosphate hydrate Al3(PO4)2(OH)3(H2O)5) that is very protective, adherent, uniform and plate like morphology of corrosion products. The AHPH is sparingly soluble and adherent to surface and imparted improved corrosion resistance.
    Matched MeSH terms: Humidity
  17. Zailina Hashim, Juliana Jalaludin, Norzila Muhamad Zainudin, Azizi Omar, Jamal H. Hashim
    MyJurnal
    A study on 30 asthmatic children was conducted in Kuala Lumpur. The objective of this study was to study the relationship between respirable particulate (PM10), sulphur dioxide, ozone and various meteorological factors such as humidity, level ofrainfall and temperature with asthma attacks. This study was conducted from 1st September to 31 December 1994. Patients were selected from the Paediatric Unit, Kuala Lumpur Hospital. Questionnaires were used to obtain information from their parents on the history and severity ofasthmatic attacks ofthese patients. Questionnaires were also used to determine if the indoor sources contributed to the attack. Diary cards were used to collect information on the frequency of asthmatic attacks. Each patient's progress was followed through every week during the study period and the attacks were recorded. The data on air quality on the PM10, sulphur dioxide, nitrogen dioxide, carbon monoxide and ozone were collected hourly using the microcomputer system of air monitoring unit from the Universiti Pertanian Malaysia air quality monitoring station located at the City Hall, Kuala Lumpur. The meteorological parameters such as temperature, relative humidity and rain-fall levels were also monitored daily. The asthmatic attack percentage was obtained by dividing the number of attacks in a day with the total number of sample and multiplying by a hundred. Statistical tests indicated that there was a significant correlation between asthmatic attacks and the PM10 concentrations (r=0.73), nitrogen dioxide (r=0.57) and.carbon monoxide (r=0.53) throughout the study period. During the haze episode, more significant correlations between asthmatic attacks, PM10 concentra-tions (0.86), carbon monoxide (0.79) and nitrogen oxide (0.53) were found. Multiple regression statistical test showed that PM10 had the greatest influence on the asthmatic attack rate. The minute respirable particulate which entered the respiratory system of the asthmatics triggered attacks on these patients.
    Matched MeSH terms: Humidity
  18. Goh See Ben, Zailina Hashim, Rosnan Hamzah
    MyJurnal
    A cross sectional study to determine the exposure of heat and its biological effects on the workers in a plastic factory located in the Shah Alam Industrial Estate, Selangor, Malaysia. Forty five respondents from the polymer section in the factory were selected as the respondents. Variables measured were the environmental temperature (WBGTin), air velocity, relative humidity, body temperature, average heart and recovery heart rate. QUESTEMP°34 Area Heat Stress Monitor was used to measure the environmental temperature in °C (WBGTin) and relative humidity (%). Velocicheck Model TSI 8830 was used to measure the air velocity in meter per second (m/s) while the OMRON Blood Pressure Monitor Model T3, was used to measure average heart rate and recovery heart rate. Body temperature (°C) was measured by the Instant Ear Thermometer-OMRON Gentle Temperature Model MC509. Interviews using questionnaires were used to determine respondents’ socioeconomic background, previous risk factors on heat exposure and other information related to heat stress. Results showed that the mean environmental temperature for the exposed group was 28.75°C, the mean air velocity was 0.15 m/s and the mean relative humidity was 58.1%. These production workers were exposed occasionally to heat when loading plastic powder into the molds as well as demolding the finished plastic products from the molds. The average time of monitoring was 2 hours for intermittent exposure and 8 hours duration for overall exposure. Maximum demand for work load was measured 1 minute after work activities were stopped at the demolding section. There was a significant difference between body temperature and average heart rate before work, after 2 hours of work and after 8 hours of work ( p < 0.001). The mean recovery heart rate after 1 min was 88.0 ± 12.0 beat per min. (bpm), indicating that there is no excessive physiological demand. Body temperature (36.8 ± 0.40°C) and average heart rate after 8 hours (78 ± 12 bpm) indicated a good body control of heat exposure. Five out of six workplaces monitored had temperatures of greater than 28°C (ACGIH TLV). The workers were exposed to moderate heat stress during the study period, however, body temperature and average heart rate measurement did not reach unacceptable level of physiologic strain.
    Matched MeSH terms: Humidity
  19. Haisman MF
    Br J Nutr, 1972 Mar;27(2):375-81.
    PMID: 5015257
    Matched MeSH terms: Humidity
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links