The yeast species composition of 12 cocoa bean fermentations carried out in Brazil, Ecuador, Ivory Coast and Malaysia was investigated culture-independently. Denaturing gradient gel electrophoresis of 26S rRNA gene fragments, obtained through polymerase chain reaction with universal eukaryotic primers, was carried out with two different commercial apparatus (the DCode and CBS systems). In general, this molecular method allowed a rapid monitoring of the yeast species prevailing during fermentation. Under similar and optimal denaturing gradient gel electrophoresis conditions, the CBS system allowed a better separated band pattern than the DCode system and an unambiguous detection of the prevailing species present in the fermentation samples. The most frequent yeast species were Hanseniaspora sp., followed by Pichia kudriavzevii and Saccharomyces cerevisiae, independent of the origin of the cocoa. This indicates a restricted yeast species composition of the cocoa bean fermentation process. Exceptionally, the Ivorian cocoa bean box fermentation samples showed a wider yeast species composition, with Hyphopichia burtonii and Meyerozyma caribbica among the main representatives. Yeasts were not detected in the samples when the temperature inside the fermenting cocoa pulp-bean mass reached values higher than 45 °C or under early acetic acid production conditions.
The extract of the Psophocarpus tetragonolobus pods has been tested for antimicrobial activity in a disk diffusion assay on eight human pathogenic bacteria and two human pathogenic yeasts. The extracts of P. tetragonolobus possessed antimicrobial activity against all tested strains. The ethanolic extract of P. tetragonolobus pods was further tested for in vivo brine shrimp lethality test and in vitro sheep erythrocyte cytotoxic assay. The brine shrimp lethality test exhibited no significant toxicity (LC(50)=1.88 mg/ml) against Artemia salina, whereas sheep erythrocyte test showed significant toxicity. The reason for haemolysis of erythrocyte was discussed. The P. tetragonolobus extract with high LC(50) value signified that this plant is not toxic to human. This result also suggested that the ethanolic extract of P. tetragonolobus pods is potential source for novel antimicrobial compounds.
This study was undertaken to optimize skim milk and yeast extract concentration as a cultivation medium for optimal Bifidobacteria pseudocatenulatum G4 (G4) biomass and β -galactosidase production as well as lactose and free amino nitrogen (FAN) balance after cultivation period. Optimization process in this study involved four steps: screening for significant factors using 2(3) full factorial design, steepest ascent, optimization using FCCD-RSM, and verification. From screening steps, skim milk and yeast extract showed significant influence on the biomass production and, based on the steepest ascent step, middle points of skim milk (6% wt/vol) and yeast extract (1.89% wt/vol) were obtained. A polynomial regression model in FCCD-RSM revealed that both factors were found significant and the strongest influence was given by skim milk concentration. Optimum concentrations of skim milk and yeast extract for maximum biomass G4 and β -galactosidase production meanwhile low in lactose and FAN balance after cultivation period were 5.89% (wt/vol) and 2.31% (wt/vol), respectively. The validation experiments showed that the predicted and experimental values are not significantly different, indicating that the FCCD-RSM model developed is sufficient to describe the cultivation process of G4 using skim-milk-based medium with the addition of yeast extract.
Exotic functions of antifreeze proteins (AFP) and antifreeze glycopeptides (AFGP) have recently been attracted with much interest to develop them as commercial products. AFPs and AFGPs inhibit ice crystal growth by lowering the water freezing point without changing the water melting point. Our group isolated the Antarctic yeast Glaciozyma antarctica that expresses antifreeze protein to assist it in its survival mechanism at sub-zero temperatures. The protein is unique and novel, indicated by its low sequence homology compared to those of other AFPs. We explore the structure-function relationship of G. antarctica AFP using various approaches ranging from protein structure prediction, peptide design and antifreeze activity assays, nuclear magnetic resonance (NMR) studies and molecular dynamics simulation. The predicted secondary structure of G. antarctica AFP shows several α-helices, assumed to be responsible for its antifreeze activity. We designed several peptide fragments derived from the amino acid sequences of α-helical regions of the parent AFP and they also showed substantial antifreeze activities, below that of the original AFP. The relationship between peptide structure and activity was explored by NMR spectroscopy and molecular dynamics simulation. NMR results show that the antifreeze activity of the peptides correlates with their helicity and geometrical straightforwardness. Furthermore, molecular dynamics simulation also suggests that the activity of the designed peptides can be explained in terms of the structural rigidity/flexibility, i.e., the most active peptide demonstrates higher structural stability, lower flexibility than that of the other peptides with lower activities, and of lower rigidity. This report represents the first detailed report of downsizing a yeast AFP into its peptide fragments with measurable antifreeze activities.
Mixotrophic metabolism was evaluated as an option to augment the growth and lipid production of marine microalga Tetraselmis sp. FTC 209. In this study, a five-level three-factor central composite design (CCD) was implemented in order to enrich the W-30 algal growth medium. Response surface methodology (RSM) was employed to model the effect of three medium variables, that is, glucose (organic C source), NaNO3 (primary N source), and yeast extract (supplementary N, amino acids, and vitamins) on biomass concentration, X(max), and lipid yield, P(max)/X(max). RSM capability was also weighed against an artificial neural network (ANN) approach for predicting a composition that would result in maximum lipid productivity, Pr(lipid). A quadratic regression from RSM and a Levenberg-Marquardt trained ANN network composed of 10 hidden neurons eventually produced comparable results, albeit ANN formulation was observed to yield higher values of response outputs. Finalized glucose (24.05 g/L), NaNO3 (4.70 g/L), and yeast extract (0.93 g/L) concentration, affected an increase of X(max) to 12.38 g/L and lipid a accumulation of 195.77 mg/g dcw. This contributed to a lipid productivity of 173.11 mg/L per day in the course of two-week cultivation.
The aim of this study was to investigate the presence of multidrug resistant yeasts in the faeces of synanthropic wild birds from the Bangsar suburb of Kuala Lumpur.
Onychomycosis is the infection of nail apparatus by dermatophytes, yeasts or non-dermatophyte moulds and is responsible for 50% of all nail disorders. A five year retrospective study was conducted at Universiti Kebangsaan Malaysia to identify the common pathogens responsible for onychomycosis and to describe the epidemiology of the affected patients. A total of 278 abnormal nails were cultured, out of which 231 were positive for fungus. Females constituted 50.2% (n=116) while males 49.8% (n=115). The majority (51.9%, n=120) were between ages 50-69 years. The Malay ethnic group was most commonly affected (44.2%, n=102) followed by Chinese (33.8%, n=78), Indians (18.2%, n=42) and other ethnic groups (3.8%, n=9). The most common fungal element isolated was non-dermatophyte moulds (45.4%, n=105) followed by yeast (34.6%, n=80) and dermatophytes (1.3%, n=3). Aspergillus spp. was the commonest (59.8%,n=81) non-dermatophyte mould, while Candida spp. was the commonest yeast (74.3%, n=89) isolated. In this study, non-dermatophyte moulds are the most common microorganisms implicated to cause onychomysosis. Treatment for non-dermatophyte mould is challenging as the current available antifungal agents are more effective against dermatophytes and yeasts.
Bioethanol production using yeast has become a popular topic due to worrying depleting worldwide fuel reserve. The aim of the study was to investigate the capability of Malaysia yeast strains isolated from starter culture used in traditional fermented food and alcoholic beverages in producing Bioethanol using alginate beads entrapment method. The starter yeast consists of groups of microbes, thus the yeasts were grown in Sabouraud agar to obtain single colony called ST1 (tuak) and ST3 (tapai). The growth in Yeast Potatoes Dextrose (YPD) resulted in specific growth of ST1 at micro = 0.396 h-1 and ST3 at micro = 0.38 h-1, with maximum ethanol production of 7.36 g L-1 observed using ST1 strain. The two strains were then immobilized using calcium alginate entrapment method producing average alginate beads size of 0.51 cm and were grown in different substrates; YPD medium and Local Brown Sugar (LBS) for 8 h in flask. The maximum ethanol concentration measured after 7 h were at 6.63 and 6.59 g L-1 in YPD media and 1.54 and 1.39 g L-1in LBS media for ST1 and ST3, respectively. The use of LBS as carbon source showed higher yield of product (Yp/s), 0.59 g g-1 compared to YPD, 0.25 g g-1 in ST1 and (Yp/s), 0.54 g g-1 compared to YPD, 0.24 g g-1 in ST3 . This study indicated the possibility of using local strains (STI and ST3) to produce bioethanol via immobilization technique with local materials as substrate.
Cantaloupes continue to ripen after harvesting which is caused by ethylene production due to climacteric behaviour during postharvest storage. In this study, the cantaloupe fruits harvested at commercial maturity were evaluated for quality attributes during three weeks of storage at 10°C and a relative humidity (RH) of 90±5%. In addition, fresh-cut samples were stored for a further 19 days at 2°C and 87% RH. The fresh-cut samples were prepared on a weekly basis by dipping into deionised water (control) at 2°C for 1 minute. The effect of postharvest storage of cantaloupe on the physico-chemical properties and microbial activity was observed prior to fresh-cut processing. It was found that firmness, luminosity (L*), and titratable acidity (TA) decreased, while total soluble solids (TSS), pH, TSS:TA ratio, microbial activity (total plate count (TPC) and yeast and mould (YM)) of the fresh-cut increased over the postharvest storage period of the fruit. Meanwhile, the orange colour and the intensity (hue angle, hab, and chromaticity) of the flesh did not differ significantly during storage. The cantaloupe stored for three weeks at a low temperature indicated a successful potential for fresh-cut processing due to good maintenance of the product quality.