Displaying publications 21 - 35 of 35 in total

Abstract:
Sort:
  1. Acrylamide formation in vegetable oils and animal fats during heat treatment
    Daniali G, Jinap S, Hajeb P, Sanny M, Tan CP
    Food Chem, 2016 Dec 01;212:244-9.
    PMID: 27374529 DOI: 10.1016/j.foodchem.2016.05.174
    The method of liquid chromatographic tandem mass spectrometry was utilized and modified to confirm and quantify acrylamide in heating cooking oil and animal fat. Heating asparagine with various cooking oils and animal fat at 180°C produced varying amounts of acrylamide. The acrylamide in the different cooking oils and animal fat using a constant amount of asparagine was measured. Cooking oils were also examined for peroxide, anisidine and iodine values (or oxidation values). A direct correlation was observed between oxidation values and acrylamide formation in different cooking oils. Significantly less acrylamide was produced in saturated animal fat than in unsaturated cooking oil, with 366ng/g in lard and 211ng/g in ghee versus 2447ng/g in soy oil, followed by palm olein with 1442ng/g.
    Matched MeSH terms: Acrylamide/analysis*
  2. Sol-gel hybrid methyltrimethoxysilane-tetraethoxysilane as a new dispersive solid-phase extraction material for acrylamide determination in food with direct gas chromatography-mass spectrometry analysis
    Omar MM, Wan Ibrahim WA, Elbashir AA
    Food Chem, 2014 Sep 1;158:302-9.
    PMID: 24731346 DOI: 10.1016/j.foodchem.2014.02.045
    A sol-gel hybrid sorbent, methyltrimethoxysilane-tetraethoxysilane (MTMOS-TEOS) was successfully used as new dispersive solid phase extraction (dSPE) sorbent material in the determination of acrylamide in several Sudanese foods and analysis using GC-MS. Several important dSPE parameters were optimised. Under the optimised conditions, excellent linearity (r(2)>0.9998) was achieved using matrix matched standard calibration in the concentration range 50-1000 μg kg(-1). The limits of detection (LOD) and limit of quantification ranged from 9.1 to 12.8 μg/kg and 27.8-38.9 μg/kg, respectively. The precision (RSD%) of the method was ⩽6.6% and recoveries of acrylamide obtained were in the range of 88-103%, (n=3). The LOD obtained is comparable with the LODs of primary secondary amine dSPE. The proposed MTMOS-TEOS dSPE method is direct and safe for acrylamide analysis, showed reliable method validation performances and good cleanup effects. It was successfully applied to the analysis of acrylamide in real food samples.
    Matched MeSH terms: Acrylamide/analysis*
  3. Fulltext Dietary intake of acrylamide and epithelial ovarian cancer risk in the european prospective investigation into cancer and nutrition (EPIC) cohort
    Obón-Santacana M, Peeters PH, Freisling H, Dossus L, Clavel-Chapelon F, Baglietto L, et al.
    Cancer Epidemiol Biomarkers Prev, 2015 Jan;24(1):291-7.
    PMID: 25300475 DOI: 10.1158/1055-9965.EPI-14-0636
    Acrylamide, classified in 1994 by the International Agency for Research on Cancer (IARC) as "probably carcinogenic" to humans, was discovered in 2002 in some heat-treated, carbohydrate-rich foods. The association between dietary acrylamide intake and epithelial ovarian cancer risk (EOC) has been previously studied in one case-control and three prospective cohort studies which obtained inconsistent results and could not further examine histologic subtypes other than serous EOC. The present study was carried out in the European Prospective Investigation into Cancer and Nutrition (EPIC) subcohort of women (n = 325,006). Multivariate Cox proportional hazards models were used to assess the association between questionnaire-based acrylamide intake and EOC risk. Acrylamide was energy-adjusted using the residual method and was evaluated both as a continuous variable (per 10 μg/d) and in quintiles; when subgroups by histologic EOC subtypes were analyzed, acrylamide intake was evaluated in quartiles. During a mean follow-up of 11 years, 1,191 incident EOC cases were diagnosed. At baseline, the median acrylamide intake in EPIC was 21.3 μg/d. No associations and no evidence for a dose-response were observed between energy-adjusted acrylamide intake and EOC risk (HR10μg/d,1.02; 95% CI, 0.96-1.09; HRQ5vsQ1, 0.97; 95% CI, 0.76-1.23). No differences were seen when invasive EOC subtypes (582 serous, 118 endometrioid, and 79 mucinous tumors) were analyzed separately. This study did not provide evidence that acrylamide intake, based on food intake questionnaires, was associated with risk for EOC in EPIC. Additional studies with more reliable estimates of exposure based on biomarkers may be needed.
    Matched MeSH terms: Acrylamide/adverse effects*
  4. Bacterial cellulose/acrylamide pH-sensitive smart hydrogel: development, characterization, and toxicity studies in ICR mice model
    Pandey M, Mohamad N, Amin MC
    Mol Pharm, 2014 Oct 6;11(10):3596-608.
    PMID: 25157890 DOI: 10.1021/mp500337r
    The objective of this study is to synthesize and evaluate acute toxicity of the bacterial cellulose (BC)/acrylamide (Am) hydrogels as noncytotoxic and biocompatible oral drug delivery vehicles. A novel series of solubilized BC/Am hydrogels were synthesized using a microwave irradiation method. The hydrogels were characterized by Fourier transform infrared spectroscopy (FTIR), swelling ratio, porosity, drug release, and in vitro and in vivo biocompatibility experiments. FTIR spectra revealed that the BC crystallinity and gel fraction decreased as the NaOH concentration increased from 2% to 10% w/v, whereas the optical transparency, pH sensitivity, and porosity were enhanced with increasing alkali concentration. Theophylline was used as a model drug for drug loading and release studies. The percentage of drug released was higher at pH 7.4 compared to pH 1.5. In vitro cytotoxicity and hemolytic tests indicated that the BC/Am hydrogel is noncytotoxic and hemocompatible. Results of acute oral toxicity tests on ICR mice suggested that the hydrogels are nontoxic up to 2000 mg/kg when administered orally, as no toxic response or histopathological changes were observed in comparison to control mice. The results of this study demonstrated that the pH-sensitive smart hydrogel makes it a possible safe carrier for oral drug delivery.
    Matched MeSH terms: Acrylamide/chemistry*
  5. The influence of deep frying using various vegetable oils on acrylamide formation in sweet potato (Ipomoea batatas L. Lam) chips
    Lim PK, Jinap S, Sanny M, Tan CP, Khatib A
    J Food Sci, 2014 Jan;79(1):T115-21.
    PMID: 24344977 DOI: 10.1111/1750-3841.12250
    The objective of this study was to evaluate the precursors of acrylamide formation in sweet potato (SP) (Ipomoea batatas L. Lam) chips and to determine the effect of different types of vegetable oils (VOs), that is, palm olein, coconut oil, canola oil, and soya bean oil, on acrylamide formation. The reducing sugars and amino acids in the SP slices were analyzed, and the acrylamide concentrations of SP chips were measured. SP chips that were fried in a lower degree of unsaturation oils contained a lower acrylamide concentration (1443 μg/kg), whereas those fried with higher degree of unsaturated oils contained a higher acrylamide concentration (2019 μg/kg). SP roots were found to contain acrylamide precursors, that is, 4.17 mg/g glucose and 5.05 mg/g fructose, and 1.63 mg/g free asparagine. The type of VO and condition used for frying, significantly influenced acrylamide formation. This study clearly indicates that the contribution of lipids in the formation of acrylamide should not be neglected.
    Matched MeSH terms: Acrylamide/analysis*
  6. Fulltext Reduction of saltiness and acrylamide levels in palm sugar-like flavouring through buffer modification and the addition of calcium chloride
    Tan PY, Tan CP, Abas F, Ho CW, Mustapha WA
    Molecules, 2013 Jun 10;18(6):6792-803.
    PMID: 23752466 DOI: 10.3390/molecules18066792
    Palm sugar-like flavouring (PSLF) is a type of flavour product that is formed by heating amino acids and sugar under specific heating conditions. Unfortunately, PSLF has a salty taste and contains high amounts of acrylamide. Hence, the objective of this research was to reduce saltiness and acrylamide without negatively affecting the aroma properties of PSLF. A decrease in the sodium phosphate (NaHPO₄) buffer concentration from 0.20 to 0.02 M was found to reduce sodium to approximately 15% of the level found in original PSLF. A further decrease (~25%) in the sodium content was achieved by removing monobasic sodium phosphate (NaH₂PO₄) from the buffer system. Meanwhile, the addition of CaCl₂ at 20-40 mg/L reduced the acrylamide content in PSLF by as much as 58%. A CaCl₂ concentration of 20 mg/mL was most favourable as it most efficiently suppressed acrylamide formation while providing an acceptably high flavour yield in PSLF. In view of the high acrylamide content in PSLF, additional work is necessary to further reduce the amount of acrylamide by controlling the asparagine concentration in the precursor mixture.
    Matched MeSH terms: Acrylamide/chemistry*
  7. Fulltext Acrylamide and glycidamide hemoglobin adduct levels and endometrial cancer risk: A nested case-control study in nonsmoking postmenopausal women from the EPIC cohort
    Obón-Santacana M, Freisling H, Peeters PH, Lujan-Barroso L, Ferrari P, Boutron-Ruault MC, et al.
    Int J Cancer, 2016 Mar 01;138(5):1129-38.
    PMID: 26376083 DOI: 10.1002/ijc.29853
    Acrylamide, classified in 1994 by IARC as "probably carcinogenic to humans," was discovered in 2002 in some heat-treated, carbohydrate-rich foods. Four prospective studies have evaluated the association between dietary acrylamide intake and endometrial cancer (EC) risk with inconsistent results. The purpose of this nested case-control study, based on the European Prospective Investigation into Cancer and Nutrition (EPIC) cohort, was to evaluate, for the first time, the association between hemoglobin adducts of acrylamide (HbAA) and glycidamide (HbGA) and the risk of developing EC in non-smoking postmenopausal women. Hemoglobin adducts were measured in red blood cells by HPLC/MS/MS. Four exposure variables were evaluated: HbAA, HbGA, their sum (HbAA+HbGA), and their ratio (HbGA/HbAA). The association between hemoglobin adducts and EC was evaluated using unconditional multivariable logistic regression models, and included 383 EC cases (171 were type-I EC), and 385 controls. Exposure variables were analyzed in quintiles based on control distributions. None of the biomarker variables had an effect on overall EC (HRHbAA;Q5vsQ1 : 0.84, 95%CI: 0.49-1.48; HRHbGA;Q5vsQ1 : 0.94, 95%CI: 0.54-1.63) or type-I EC risk. Additionally, none of the subgroups investigated (BMI 
    Matched MeSH terms: Acrylamide/metabolism*
  8. Fulltext Isolation and characterization of a metal-reducing Pseudomonas sp. strain 135 with amide-degrading capability
    Yakasai, M.H., Rahman, M.F., Khayat, M.E., Shukor, M.Y., Shamaan, N.A., Rahim, M.B.H.A.
    Bioremediation Science and Technology Research, 2017;5(2):32-38.
    MyJurnal
    The presence of both heavy metals and organic xenobiotic pollutants in a contaminated site
    justifies the application of either a multitude of microbial degraders or microorganisms having
    the capacity to detoxify a number of pollutants at the same time. Molybdenum is an essential
    heavy metal that is toxic to ruminants at a high level. Ruminants such as cow and goats
    experience severe hypocuprosis leading to scouring and death at a concentration as low as
    several parts per million. In this study, a molybdenum-reducing bacterium with amide-degrading
    capacity has been isolated from contaminated soils. The bacterium, using glucose as the best
    electron donor reduces molybdenum in the form of sodium molybdate to molybdenum blue. The
    maximal pH reduction occurs between 6.0 and 6.3, and the bacterium showed an excellent
    reduction in temperatures between 25 and 40 oC. The reduction was maximal at molybdate
    concentrations of between 15 and 25 mM. Molybdenum reduction incidentally was inhibited by
    several toxic heavy metals. Other carbon sources including toxic xenobiotics such as amides
    were screened for their ability to support molybdate reduction. Of all the amides, only
    acrylamide can support molybdenum reduction. The other amides; such as acetamide and
    propionamide can support growth. Analysis using phylogenetic analysis resulted in a tentative
    identification of the bacterium as Pseudomonas sp. strain 135. This bacterium is essential in
    remediating sites contaminated with molybdenum, especially in agricultural soil co-contaminated
    with acrylamide, a known soil stabilizer.
    Matched MeSH terms: Acrylamide
  9. Fulltext Assessment of Polyacrylamide Based Co-Polymers Enhanced by Functional Group Modifications with Regards to Salinity and Hardness
    Akbari S, Mahmood SM, Tan IM, Ghaedi H, Ling OL
    Polymers (Basel), 2017 Nov 27;9(12).
    PMID: 30965947 DOI: 10.3390/polym9120647
    This research aims to test four new polymers for their stability under high salinity/high hardness conditions for their possible use in polymer flooding to improve oil recovery from hydrocarbon reservoirs. The four sulfonated based polyacrylamide co-polymers were FLOCOMB C7035; SUPERPUSHER SAV55; THERMOASSOCIATIF; and AN132 VHM which are basically sulfonated polyacrylamide copolymers of AM (acrylamide) with AMPS (2-Acrylamido-2-Methylpropane Sulfonate). AN132 VHM has a molecular weight of 9⁻11 million Daltons with 32 mol % degree of sulfonation. SUPERPUSHER SAV55 mainly has about 35 mol % sulfonation degree and a molecular weight of 9⁻11 million Daltons. FLOCOMB C7035, in addition, has undergone post-hydrolysis step to increase polydispersity and molecular weight above 18 million Daltons but it has a sulfonation degree much lower than 32 mol %. THERMOASSOCIATIF has a molecular weight lower than 12 million Daltons and a medium sulfonation degree of around 32 mol %, and also contains LCST (lower critical solution temperature) type block, which is responsible for its thermoassociative characteristics. This paper discusses the rheological behavior of these polymers in aqueous solutions (100⁻4500 ppm) with NaCl (0.1⁻10 wt %) measured at 25 °C. The effect of hardness was investigated by preparing a CaCl₂-NaCl solution of same ionic strength as the 5 wt % of NaCl. In summary, it can be concluded that the rheological behavior of the newly modified co-polymers was in general agreement to the existing polymers, except that THERMOASSOCIATIF polymers showed unique behavior, which could possibly make them a better candidate for enhanced oil recovery (EOR) application in high salinity conditions. The other three polymers, on the other hand, are better candidates for EOR applications in reservoirs containing high divalent ions. These results are expected to be helpful in selecting and screening the polymers for an EOR application.
    Matched MeSH terms: Acrylamide
  10. Fulltext A New Empirical Model for Viscosity of Sulfonated Polyacrylamide Polymers
    Akbari S, Mahmood SM, Ghaedi H, Al-Hajri S
    Polymers (Basel), 2019 Jun 14;11(6).
    PMID: 31207965 DOI: 10.3390/polym11061046
    Copolymers of acrylamide with the sodium salt of 2-acrylamido-2-methylpropane sulfonic acid-known as sulfonated polyacrylamide polymers-had been shown to produce very promising results in the enhancement of oil recovery, particularly in polymer flooding. The aim of this work is to develop an empirical model through the use of a design of experiments (DOE) approach for bulk viscosity of these copolymers as a function of polymer characteristics (i.e., sulfonation degree and molecular weight), oil reservoir conditions (i.e., temperature, formation brine salinity and hardness) and field operational variables (i.e., polymer concentration, shear rate and aging time). The data required for the non-linear regression analysis were generated from 120 planned experimental runs, which had used the Box-Behnken construct from the typical Response Surface Methodology (RSM) design. The data were collected during rheological experiments and the model that was constructed had been proven to be acceptable with the Adjusted R-Squared value of 0.9624. Apart from showing the polymer concentration as being the most important factor in the determination of polymer solution viscosity, the evaluation of the model terms as well as the Sobol sensitivity analysis had also shown a considerable interaction between the process parameters. As such, the proposed viscosity model can be suitably applied to the optimization of the polymer solution properties for the polymer flooding process and the prediction of the rheological data required for polymer flood simulators.
    Matched MeSH terms: Acrylamide
  11. Fulltext One-step synthesis of zwitterionic graphene oxide nanohybrid: Application to polysulfone tight ultrafiltration hollow fiber membrane
    Syed Ibrahim GP, Isloor AM, Ismail AF, Farnood R
    Sci Rep, 2020 04 23;10(1):6880.
    PMID: 32327672 DOI: 10.1038/s41598-020-63356-2
    In this paper, novel zwitterionic graphene oxide (GO) nanohybrid was synthesized using monomers [2-(Methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide (SBMA) and N,N'-methylenebis(acrylamide) (MBAAm) (GO@poly(SBMA-co-MBAAm), and incorporated into polysulfone (PSF) hollow fiber membrane for the effectual rejection of dye from the wastewater. The synthesized nanohybrid was characterized using FT-IR, PXRD, TGA, EDX, TEM and zeta potential analysis. The occurrence of nanohybrid on the membrane matrix and the elemental composition were analyzed by XPS. The as-prepared tight ultrafiltration hollow fiber membrane exhibited high rejection of reactive black 5 (RB-5, 99%) and reactive orange 16 (RO-16, 74%) at a dye concentration of 10 ppm and pure water flux (PWF) of 49.6 L/m2h. Fabricated nanocomposite membranes were also studied for their efficacy in the removal of both monovalent (NaCl) and divalent salts (Na2SO4). The results revealed that the membrane possesses complete permeation to NaCl with less rejection of Na2SO4 (<5%). In addition, the nanocomposite membrane revealed outstanding antifouling performance with the flux recovery ratio (FRR) of 73% towards bovine serum albumin (BSA). Therefore, the in-house prepared novel nanocomposite membrane is a good candidate for the effective decolorization of wastewater containing dye.
    Matched MeSH terms: Acrylamide
  12. Fulltext Dietary and lifestyle determinants of acrylamide and glycidamide hemoglobin adducts in non-smoking postmenopausal women from the EPIC cohort
    Obón-Santacana M, Lujan-Barroso L, Freisling H, Cadeau C, Fagherazzi G, Boutron-Ruault MC, et al.
    Eur J Nutr, 2017 Apr;56(3):1157-1168.
    PMID: 26850269 DOI: 10.1007/s00394-016-1165-5
    PURPOSE: Acrylamide was classified as 'probably carcinogenic' to humans in 1994 by the International Agency for Research on Cancer. In 2002, public health concern increased when acrylamide was identified in starchy, plant-based foods, processed at high temperatures. The purpose of this study was to identify which food groups and lifestyle variables were determinants of hemoglobin adduct concentrations of acrylamide (HbAA) and glycidamide (HbGA) in 801 non-smoking postmenopausal women from eight countries in the European Prospective Investigation into Cancer and Nutrition (EPIC) cohort.

    METHODS: Biomarkers of internal exposure were measured in red blood cells (collected at baseline) by high-performance liquid chromatography/tandem mass spectrometry (HPLC/MS/MS) . In this cross-sectional analysis, four dependent variables were evaluated: HbAA, HbGA, sum of total adducts (HbAA + HbGA), and their ratio (HbGA/HbAA). Simple and multiple regression analyses were used to identify determinants of the four outcome variables. All dependent variables (except HbGA/HbAA) and all independent variables were log-transformed (log2) to improve normality. Median (25th-75th percentile) HbAA and HbGA adduct levels were 41.3 (32.8-53.1) pmol/g Hb and 34.2 (25.4-46.9) pmol/g Hb, respectively.

    RESULTS: The main food group determinants of HbAA, HbGA, and HbAA + HbGA were biscuits, crackers, and dry cakes. Alcohol intake and body mass index were identified as the principal determinants of HbGA/HbAA. The total percent variation in HbAA, HbGA, HbAA + HbGA, and HbGA/HbAA explained in this study was 30, 26, 29, and 13 %, respectively.

    CONCLUSIONS: Dietary and lifestyle factors explain a moderate proportion of acrylamide adduct variation in non-smoking postmenopausal women from the EPIC cohort.

    Matched MeSH terms: Acrylamide/blood*
  13. Fulltext Acrylamide and Glycidamide Hemoglobin Adducts and Epithelial Ovarian Cancer: A Nested Case-Control Study in Nonsmoking Postmenopausal Women from the EPIC Cohort
    Obón-Santacana M, Lujan-Barroso L, Travis RC, Freisling H, Ferrari P, Severi G, et al.
    Cancer Epidemiol Biomarkers Prev, 2016 Jan;25(1):127-34.
    PMID: 26598536 DOI: 10.1158/1055-9965.EPI-15-0822
    BACKGROUND: Acrylamide was classified as "probably carcinogenic to humans (group 2A)" by the International Agency for Research on Cancer. Epithelial ovarian cancer (EOC) is the fourth cause of cancer mortality in women. Five epidemiological studies have evaluated the association between EOC risk and dietary acrylamide intake assessed using food frequency questionnaires, and one nested case-control study evaluated hemoglobin adducts of acrylamide (HbAA) and its metabolite glycidamide (HbGA) and EOC risk; the results of these studies were inconsistent.

    METHODS: A nested case-control study in nonsmoking postmenopausal women (334 cases, 417 controls) was conducted within the European Prospective Investigation into Cancer and Nutrition (EPIC) cohort. Unconditional logistic regression models were used to estimate ORs and 95% confidence intervals (CI) for the association between HbAA, HbGA, HbAA+HbGA, and HbGA/HbAA and EOC and invasive serous EOC risk.

    RESULTS: No overall associations were observed between biomarkers of acrylamide exposure analyzed in quintiles and EOC risk; however, positive associations were observed between some middle quintiles of HbGA and HbAA+HbGA. Elevated but nonstatistically significant ORs for serous EOC were observed for HbGA and HbAA+HbGA (ORQ5vsQ1, 1.91; 95% CI, 0.96-3.81 and ORQ5vsQ1, 1.90; 95% CI, 0.94-3.83, respectively); however, no linear dose-response trends were observed.

    CONCLUSION: This EPIC nested case-control study failed to observe a clear association between biomarkers of acrylamide exposure and the risk of EOC or invasive serous EOC.

    IMPACT: It is unlikely that dietary acrylamide exposure increases ovarian cancer risk; however, additional studies with larger sample size should be performed to exclude any possible association with EOC risk.

    Matched MeSH terms: Acrylamide/metabolism*; Acrylamide/chemistry
  14. Isolation and characterization of an acrylamide-degrading yeast Rhodotorula sp. strain MBH23 KCTC 11960BP
    Rahim MB, Syed MA, Shukor MY
    J Basic Microbiol, 2012 Oct;52(5):573-81.
    PMID: 22144174 DOI: 10.1002/jobm.201100116
    As well as for chemical and environmental reasons, acrylamide is widely used in many industrial applications. Due to its carcinogenicity and toxicity, its discharge into the environment causes adverse effects on humans and ecology alike. In this study, a novel acrylamide-degrading yeast has been isolated. The isolate was identified as Rhodotorula sp. strain MBH23 using ITS rRNA analysis. The results showed that the best carbon source for growth was glucose at 1.0% (w/v). The optimum acrylamide concentration, being a nitrogen source for cellular growth, was at 500 mg l(-1). The highest tolerable concentration of acrylamide was 1500 mg l(-1) whereas growth was completely inhibited at 2000 mg l(-1). At 500 mg l(-1), the strain MBH completely degraded acrylamide on day 5. Acrylic acid as a metabolite was detected in the media. Strain MBH23 grew well between pH 6.0 and 8.0 and between 27 and 30 °C. Amides such as 2-chloroacetamide, methacrylamide, nicotinamide, acrylamide, acetamide, and propionamide supported growth. Toxic heavy metals such as mercury, chromium, and cadmium inhibited growth on acrylamide.
    Matched MeSH terms: Acrylamide/metabolism*
  15. Fulltext Isolation and characterization of a heavy metal-reducing Pseudomonas sp. strain Dr.Y Kertih with the ability to assimilate phenol and diesel
    Veeraswamy Kesavan, Abdulrasheed Mansur, Mohd Syahmi Ramzi Salihan, Rahman, M.F., Suhaili, Zarizal, Shukor, M.Y.
    Bioremediation Science and Technology Research, 2018;6(1):14-22.
    MyJurnal
    The indiscriminate released of heavy metals and xenobiotics into soils and aquatic bodies
    severely alter soil organisms and the ecosystem. The isolation of xenobiotics degrading
    microorganisms is cost-effective and naturally pleasant approach. Lately, the toxicological effect
    of molybdenum to the spermatogenesis of several organisms has been record. This present study
    is aimed at the isolation and characterization of a bacterium capable of converting molybdenum
    to the colloidal molybdenum blue. Bacteria characterization was performed in a microplate
    format using resting cells. Thus, the reduction process can be employed as a device for
    molybdenum bioremediation. The results of the study revealed an optimum reduction at pH
    between 6.0 and 6.3 and temperatures of between 25 and 40 oC. Similarly, it was also observed
    that a phosphate concentration not greater than 5.0 mM and a sodium molybdate concentration
    at 20 mM was required for reduction. Glucose was observed as the best carbon source to support
    reduction. Following the scanning of molybdenum blue, it revealed an absorption spectrum
    indicating the characteristics of molybdenum blue as a reduced phosphomolybdate. Molybdenum
    reduction is inhibited by heavy metals like silver, lead, arsenic and mercury. Furthermore, the
    ability of the bacterium (Pseudomonas sp. strain Dr.Y Kertih) to utilize several organic
    xenobiotics such as phenol, acrylamide, nicotinamide, acetamide, iodoacetamide, propionamide,
    acetamide, sodium dodecyl sulfate (SDS) and diesel as electron donor sources for aiding
    reduction or as carbon sources for growth was also examined. Finding showed that none was
    capable of aiding molybdenum reduction, however the bacterium was capable of growing on both
    diesel and phenol as carbon sources. GC analysis was used to confirmed diesel degradation.
    Matched MeSH terms: Acrylamide
Related Terms
Filters
Contact Us

Please provide feedback to Administrator (afdal@afpm.org.my)

External Links